Bridge has never launched - Error code 6 on installation - So frustrated with "support" - HELP!

So, I'm going to rant just like everyone else here. It makes me feel better. I spent 11 HOURS on the phone with Adobe's foreign support team yesterday and still, nothing is resolved! At this point, I will not relent until my problem is solved.
Here's the deal:
I got CS5 Creative Suite Design Standard in October 2010 and installed it on my Mac. I have only learned to use Photoshop and really wanted to use Bridge, but Bridge would never launch. I always got an error that the program quit unexpectedly. I was reluctant to call Adobe knowing I would be on the phone forever. Little did I imagine 11 hours!
Yesterday, I finally called. They said that my initial installation must not have been successful due to permission issues. After 5 people I couldn't understand well and 5 disc uninstall/re-installs, I am still getting the infamous "exit code 6" error upon installation. Photoshop still works, but not Bridge. They said that exit code 6 is a known issue but that it is a generic code and could be caused by many things. The latest thing they asked me to do (at 11PM last night) was send them the error logs from the installation. I did and it could take 24 - 48 hours for them to analyze & respond. I personally don't think they will ever call me back, so I will have to hound them again today.
I don't understand why installing software has to be so freaking hard! The won't give me a new disk to see if I have a bad one, but they say that reading these error logs and acting on them always resolves the issue. Why they didn't say that in hour 4, I don't know.
Has anyone else had this issue? Please tell me what you did to solve it!

Here is a link to Error 6 on a Windows machine. Although a different OS there may be similarities with your problem. Might be worth a read.
It is a long thread but look at post #136 for sure. The fellow solved his problem, in his case a conflict with the anti-virus.
Hope this helps to get you up an running.
http://forums.adobe.com/thread/629188

Similar Messages

Why will photoshop not open after loading it to new iMac computer from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

Why will Photoshop CS4 not open after loading to new iMac from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
The answer is easy: Reinstall CS4 from your disc. and apply all updates.
Gene

Flash cannot be launched error code -10810

I try to launch Flash. I've been using just fine for a while
and all I get is this:
Flash cannot be launched error code -10810
don't know what to do. I figure something is corrupt
somewhere. I moved Flash Preferences out of its folder, in the hope
that was it. Should I just reinstall Flash or what?
I'm using a mac.

Hi Srinivas,
Thank You for the instruction re: SIFC, this has helped, the browser starts and I arrive at the Netweaver logon screen.
However at the logon screen I seem to be encountering further errors, I have attempted to logon on, the dialog box does not appear, details from the logon screen are as follows:
No switch to HTTPS occurred, so it is not secure to send a password
SSO logon not possible; logon tickets not activated on the server
Choose "Log On" to continue. A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password
System:
*Client: **
User:
Password:
Language:
English EN
German DE
Log On
Change Password
Any further advice here would be most appreciated.
Regards,
Mart.

Launch error code: -2857 Exited with error code: 215

Anybody have any idea what:
"Launch error code: -2857 Exited with error code: 215"
means when launching an app? Tries to launch, then quit. That shows up in the Console.
Thanks.

First I want to say thanks for the feedback. I appreciate the support and helpful suggestions.
Second, Epson sent me an answer of sorts...they provided detailed instructions on uninstalling the application and then told me to reinstall using the disk image from their web site (in other words, don't use their web package to "update" and existing installation). I did this and things seem to be running fine now. It's unfortunate that their update instructions don't say to do this in the first place (maybe I missed it ).
So at one level this issue is solved. Unfortunately I'm too curious and wanted to know why the error happend in the first place. As a software developer myself (mainframe and midrange server based) I hate the "delete and reinstall" answer as it does nothing to really identify and solve the real problem. But I do also appreciate the idea of "just get it fixed fast" so that's what I did.
Anyway, I will now spend some time learning about Launch Services to see if I can get a more specific understanding of what happened.
Thanks again for the help.
24" iMac, 2GB Memory, etc Mac OS X (10.4.8) 20" iMac, two MacBooks, one Dual Core Mac Mini

Game has stopped loading, error code - 1712?

Sims 3 pets has stopped loading error code - 1712?

A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
The answer is easy: Reinstall CS4 from your disc. and apply all updates.
Gene

SSIS Package - An OLE DB error has occurred. Error code: 0x80040154.

I am getting below error when i try to execute a package
using batch file
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 7:15:29 AM
Progress: 2014-10-01 07:15:36.05
Source: Data Flow Task
Validating: 0% complete
End Progress
Error: 2014-10-01 07:15:36.05
Code: 0xC0202009
Source: ADTM001_UPDATE_COSTS_TIU0560 Connection manager "Excel
Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB
Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC020801C
Source: Data Flow Task Read Data From XLS [1]
Description: The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC0047017
Source: Data Flow Task DTS.Pipeline
Description: component "Read Data From XLS" (1) failed
validation and returned error code 0xC020801C.
I have tried to use 32 bit exe as well , But then i get below
error ,
Could not load package because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE
DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.). The SQL
statement that was issued has failed.

Hi Thanks for your reply, But the packages are already running under window authentication.
Please suggest something.The url you have given as reference does not solve my issue
I have tried to run 32 bit dtexec, I get below error'
Could
not load package because of error 0xC0014062.
Description:
The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections.). The SQL statement that was issued has failed.

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog

SSDT 2014 An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E14

SSDT 2014 (SSIS 2014) running in Visual Studio 2013 against a SQL Server 2014 Enterprise Edition db.
We are converting by hand a Business Intelligence site from SQL Server 2008 R2 databases (Data Warehouse, SharePoint databases and SSAS cubes), SharePoint 2010 Portal Site, and BIDS 2008 to SQL Server 2014 databases, SharePoint 2013, and SSDT 2014
for Visual Studio 2013. This SSIS Package runs fine in the BIDS/SQL 2008 R2 environment. The Variable Expression in this Data Flow Task is:
"SELECT [ORDER_ID]
,[ORDER_NUMBER]
,[TRACKING_PREFIX_ID]
,[TRACKING_NUMBER]
,[REVISION_NUM]
,[ORDER_TYPE]
,[STATUS]
,[WEIGHT]
,[PLACEMENT_DATE]
,[REQUESTED_DELIVERY]
,[OUTLET_ID]
,[DEV_LOC_ID]
,[TSR_ID]
,[LAST_LINE_ITEM]
,[PARTIALS]
,[WAREHOUSE_ID]
,[COURIER_ID]
,[ALT_ADDRESS_ID]
,[ROUTE_CRITERION]
,[SHIPMENT_ID]
,[MANIFEST_NOTE_ID]
,[COURIER_NOTE_ID]
,[CONFIRM_DATE]
,[LINE_NO]
,[FILL_DATE]
,[LAUNCH_ID]
,[CDC_DK]
,[ORDER_SIZE]
,[PICK_PACK_USER]
,[LAST_DATE_MODIFIED]
,[USER_MODIFIED]
,[IA_INSERT_DT]
,[IA_UPDATE_DT]
,[SOURCE_ID]
FROM [DB2ADMIN].[IA_ORDERS]
WHERE [CDC_DK] = "
+(DT_STR,5,1252)@[User::CurrentDateKey]
This is the ERROR:
An OLE DB error has occurred.
Error code: 0x80040E14.
An OLE DB record is available.
Source: "Microsoft DB2 OLE DB Provider"
Hresult: 0x80040E14
Description: "An unexpected token "SELECTBEGIN-OF-STATEMENT<value" was found following "".
Expected tokens may include: "". SQLSTATE: 42601, SQLCODE: -104".

Hi Scottony,
If I understand correctly, you are using a variable with the expression you post as the DB2 query command for Data access.
Based on the error message, it seems that the error is caused by you are using a SQL query as IBM DB2 query. Since the query is correct in SQL Server. Please verify the IBM DB2 query is correct, then evaluate the expression of variable SourceSQL_Orders to
make sure the query is just you need.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

No database connector has been specified - Error code:-2147467259 error

Hi,
Iu2019m trying to populate a report and preview it using JRC. Iu2019m using the JRC jar files versions from CR XI R2 SP4. I have created a report using locale data source xml file and scheme file. I can preview the report from Crystal Report Designer without any probelm. When I try to preview the same layout using my Java application I get the error " No database connector has been specified.---- Error code:-2147467259 Error code name:failed " when I try to set the table location (reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);) I even get this when I try to set the date source (reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, " FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");) I tried shifting the order of setDataSource and setTableLocation but that didnu2019t help as well.
Can you please help me?
Thanks you in advance.
Regards,
Chanaka
Code to set connection info
public void setDBLogonXML(String xmlFilePath, String xsdFilePath)
      final String SERVER_TYPE = "XML";
      final String CONVERT_MULTIVALUE_TO_TABLE="false";
      final String DATABASE_DLL = "crdb_xml.dll";
      try {
         Tables tables = reportClientDoc.getDatabaseController().getDatabase().getTables();
         //Set the datasource for all main report tables.
         for (int i = 0; i < tables.size(); i++) {
            ITable table = tables.getTable(i);
            //Keep existing name and alias.
            table.setName(table.getName());
            table.setQualifiedName(table.getQualifiedName());
            table.setAlias(table.getAlias());
            //Change connection information properties.
            IConnectionInfo connectionInfo = table.getConnectionInfo();
            //Set new table connection property attributes.
            PropertyBag propertyBag = new PropertyBag();
            propertyBag.put("Server Type", SERVER_TYPE);
            propertyBag.put("Database DLL",DATABASE_DLL );
            propertyBag.put("Local XML File",xmlFilePath);
            propertyBag.put("Local Schema File",xsdFilePath);
            String conString = "Local XML File=s("+xmlFilePath+");Local Schema File=s("+xsdFilePath+")";
            propertyBag.put("Connection String",conString);
            connectionInfo.setAttributes(propertyBag);
            table.setConnectionInfo(connectionInfo);
            //Update old table in the report with the new table.
            reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);
          catch(ReportSDKException ex) {
               System.out.println(ex);
          catch(Exception ex) {
               System.out.println(ex);
Main programu2026..
setDBLogonXML("D:\\Reports\\Current Sessions.xml","D:\\Reports\\FndSessionRep.xsd");
         xmlDataSet = new XMLDataSet(new ByteArray(xmlFile), new ByteArray(xsdFile));
         reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, "FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");
Error Stack
- JRCAgent1 detected an exception: No database connector has been specified.
        at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
        at com.crystaldecisions.reports.sdk.DatabaseController.setTableLocation(Unknown Source)
        at jrc_xml_test_app_01.testDlg.setDBLogonXML(testDlg.java:378)
        at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:117)
        at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
        at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:5501)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
        at java.awt.Component.processEvent(Component.java:5266)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3968)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.Window.dispatchEventImpl(Window.java:1778)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
        at java.awt.Dialog$1.run(Dialog.java:525)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
- JRCAgent1 received request: setDataSourceRequest
- command SETUP: Create Data Connection
- command PERFORM: Create Data Connection
- -- command is undoable -> purge redo stack
- command SETUP: Set Data Connection Property
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
        at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- command PERFORM: Set Data Connection Property
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- -- command is NOT UNDOABLE -> purge undo stack
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
- --- Purging command Create Data Connection
        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
- command SETUP: Set Data Connection Property
        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
- command PERFORM: Set Data Connection Property
        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
- JRCAgent1 detected an exception: No database connector has been specified.
        at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
        at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
        at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
        at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
        at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
        at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
        at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
        at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
        at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:5501)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
        at java.awt.Component.processEvent(Component.java:5266)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3968)
        at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:5501)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.processEvent(Component.java:5266)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.Component.dispatchEventImpl(Component.java:3968)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.Window.dispatchEventImpl(Window.java:1778)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.Window.dispatchEventImpl(Window.java:1778)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.Dialog$1.run(Dialog.java:525)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.Dialog$1.run(Dialog.java:525)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
No database connector has been specified.
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Post Author: ililal
CA Forum: Data Connectivity and SQL
I spoke directly with Business Objects. They said,"Sun Application Server 8.2 is not supported."

SSIS 2008 R2 Excel Destination Error, "An OLE DB error has occurred. Error code: 0x80040E21.", cannot export to the new Excel (.xlsx) format

Hello.
I've been attempting to do a very simple task that just isn't working. For a Data Flow Task action in SSIS, I am trying to export data from a single SQL Server (2008 R2) database table to an Excel spreadsheet (.xlsx). No matter what I do, it
just keeps failing. The columns in the table match the column header names (in the first row) in the tab I select. Here is the output I get.
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's
console.
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, Excel Destination [52]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
Error: 0xC0202025 at Data Flow Task, Excel Destination [52]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: component "Excel Destination" (52) failed the pre-execute phase and returned error code 0xC0202025.
Information: 0x40043008 at Data Flow Task, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "component "Excel Destination" (52)" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
SSIS package "Package.dtsx" finished: Success.
I kick-off the action and sometimes is hangs for a few seconds (20+ seconds) and sometimes it doesn't, but either way it fails. I tried this on a 32-bit machine, 64-bit machine, and still it fails. I tried an OLE DB connection to Excel and
that doesn't work either. I made sure that the connection string for the Excel spreadsheet is Provider=Microsoft.ACE.OLEDB.12.0;Data Source=[filepath\excelfile].xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES"; and still it doesn't work.
Now, when I switch it over to export to an Excel 2003 spreadsheet (.xls) it works! But I don't want it to go to the old Excel spreadsheet format, my requirement is to export the data to the new format. Is there a bug in the Access 2010 Database
Engine that won't allow me to export to the new Excel format? Otherwise, what can I be doing wrong? I set the Run64BitRuntime property to False and it still doesn't work.
My solution (so far) is to export it to Excel 2003 and then via the Script Task action use the Excel COM API (Microsoft.Office.Interop.Excel.dll) for 2010, open the file and save it in the new format (.xlsx) and that works great! However, the client
doesn't want to install Excel on the database server! So what can I do when the Excel Destination or OLE DB Destination (to connect to Excel) actions don't work!? Please help!!!
Like I mentioned, if this is a bug, that would be great to know so I can stop wasting my time. Thanks again.

Alright, so you mean to say is that the driver is not installed. Isn't version 12 the 2010 Access Database Engine Driver? I did install that, and I also tried the 2007 Access DB Engine driver, and both don't work. What driver am I missing?
The connection string is correctly formatted, yes?
Also, when setting up the OLE DB Destination action and I have it point to the Excel spreadsheet, and I specify as the provider "Microsoft Office 12.0 Access Database Engine OLE DB Provider" and click on Test Connection, the connection is
successful. Wouldn't that mean the 12.0 version driver is installed?
Thanks in advance.

Error Code 1 - Installation failed the Creative Cloud Desktop

Hello, when I start the installation comes the message: Error Code 1 - Installation failed the Creative Cloud Desktop

Hi Ned Murphy thanks for the help. I managed to solve the problem.

I need help re-installing CS4 production premium. Error code says "Installation database is corrupt" but if I try to delete the caps.db file I can't even find one. Furthermore, I tried Adobe Cleaner and it made no difference. HELP!

I need help re-installing CS4 production premium (for PC). Error code says "Installation database is corrupt" but if I try to delete the caps.db file I can't even find one. Furthermore, I tried Adobe Cleaner and it made no difference. HELP!

I need help re-installing CS4 production premium (for PC). Error code says "Installation database is corrupt" but if I try to delete the caps.db file I can't even find one. Furthermore, I tried Adobe Cleaner and it made no difference. HELP!

I have received the "licensing has stopped working" Error code 150:30. I have done all 8 suggested fixes and have had no luck fixing this mess. Anyone able to help.

I have received the "licensing has stopped working" Error code 150:30. I have done all 8 suggested fixes and have had no luck fixing this mess. Anyone able to help.

Great!
Now in Terminal at the $ prompt type sudo python <leave a space after that> Do not press enter or return yet.
Drag and drop "license recover.py" into the Terminal window, then press enter or return.
You should see this result: Confirm that you do.

I am unable to update, uninstall, or reinstall iTunes on my laptop. Windows 7 Ultimate 32 bits. Error code is 2330. Can somebody please help me?

I am unable to update, uninstall, or reinstall iTunes on my laptop. Everything was working fine until recently when there was an update available for iTunes, and when I tried to update this, I got the message, "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. Error code is 2330." Can somebody please help me?
System configuration:
Windows 7 Ultimate 32 bits.
Version: 6.1.7601 Service Pack 1 Build 7601
System Directory: C:\Windows\system32
RAM: 1.00 GB.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

Bridge has never launched - Error code 6 on installation - So frustrated with "support" - HELP!

Similar Messages

Maybe you are looking for