Bridge,( Installed, Default .jpg viewer), doesn't open by default jpg files.

I have Adobe Bridge installed and set as my default image viewer including .jpg's. It appears in programs list and as default image browser. I have some jpegs, however that a friend sent me that won't launch Bridge when selected. Their extensions are DSC###.jpg.
When selected, Windows viewer is launched. When file association is promted, Bridge does not appear in the program list, even when a deeper search in the Adobe file is performed. The images appear and open properly IN Bridge, but not by default when their file is selected outside of Bridge. Bridge appears in file association for other .jpgs. There doesn't seem to be a file extension DSC listed ( I didn't think it would be).
What Gives? (Win7 ultimate, Adobe CS5)
TY in advance!

Perhaps it is a matter of semantics. Bridge is not a separate program, so it will not be listed as the default program to open image but listed as CS5 (don't have any of those programs on this laptop, and out of town). It is strictly a browser so technically the images do not open within it. You can view the image but to open it it will be in the parent program Photoshop or one of the other in a suite.
Adobe is quite particular on images. Some images just will not open in PS. Then the best bet is to open in a program like Infanview and then use "save as" to save without imperfections.
Quicktime is the default program to open many files in Bridge, and is necessary with certain file formats.
If I am not getting to the heart of your issue I don't mean to dance around it, just not fully comprehend it.

Similar Messages

Bridge CS6 Mavericks. "Preview" doesn't open images (they appear as white thumbnails),"Content" does

I recently reformatted my hard drive and reinstalled my programs, replacing Snow Leopard with Mavericks. I've downloaded the latest version of Camera RAW. In Bridge I now see my images as thumbnails without a problem. However thePreview view doesn't open; I just see blank thumbnails. Before everything worked fine. Any suggestions?
Many thanks.

Thanks for the quick response, Pierre-Etienne. Something very strange is happening, but first let me answer your questions. After I reinstalled PS CS6 on my MacBook Pro (whose HD I had just reformatted under Mavericks) two days ago, I got a message from the Adobe Notifier or whatever it's called, telling me that there were a number of updates available for my Adobe products. I downloaded and installed them; I think a Bridge was included. I got an error message concerning 3 updates, including Camera RAW, so I went and got them by hand. The most recent ACR version seemed to be 6.7, bundled with DNC converter 8.3, which I installed, and then this morning when I ran across the problem I wrote about I did a new download, this time of the latest stand-alone version of ACR. I believe it was also 6.7, but when I open a file now in Camera RAW it gives the ACR version as 8.3. A bit confusing. You ask, where? In France, where I live, but from the English language site.
Now here's the strange thing. I just came back from some very intensive work at an international conference, where over the course of 5 days I took almost 8000 pictures. I use the star sytem in Bridge to rate the pictures (in this case 0 to 3 stars). Within each star folder there are subfolders for the different days, and then sub-subfolders for the various events each day - all in all, quite a few folders. This morning I was looking at the pictures in a particular folder, and the phenomenon that I wrote about occured: no preview image. I just checked, and it turns out that that is the only folder out of over 200 so affected! All the other pictures open normally, in all star level folders, on all days, at all events. What an amazing coincidence!
So I guess I don't in fact have a major problem. I have a minor problem involving one particular folder. The only question remaining is why that particular folder, and could it happen again?
Thanks for your help.
RGdeL

Raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

How did you install the plugin? You may want to try reinstalling it or installing the dng converter, as that is what has the camera formats. ACR 8.2 is just the plugin for the mechanics of Camera raw. Normally they should both install, but sometime the converter doesn't.

Camera Raw (7.0.0.308) doesn't open Nikon D800 NEF file after re-installing Photoshop CS6 (13.0.6 x64) Help!

Well, the title sort of sums it up. Ohyeah, and updater tells me photoshop is up to date.
I had this version of photoshop running for about a year with no problems, after doing a clean instal of my macbook an re-installing of photoshop CS6, camera raw doesn't open my D800's files anymore.
All help is appreciated! Thanks!

What OS are you running? Perhaps it is too old to be updated to the latest ACR plug-in.
If it turns out that you need to manually install the plug-in, due to the age of your OS, you can try the process described, here, which is for rolling back ACR 8.4 to ACR 8.3, but the same thing would work to replace ACR 7.0 with ACR 8.3:
http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

Installed Lion, now Iphoto doesn't open. Think I tried all tricks mentioned so far. None seems to work for me. Anybody any thoughts?

Installed Lion, now Iphoto doesn't open. Think I tried all tricks mentioned so far. None seems to work for me. Anybody any thoughts?

Installed Lion, now Iphoto doesn't open. Think I tried all tricks mentioned so far. None seems to work for me. Anybody any thoughts?

Finder won´t work. It doesn´t open any of my files, and when I try to force quit, it flahses, so i can´t click it. Help!!

I have a Macbook Pro. I´ve just installed Lion version 10.7.3.
Basically, one day I turned on my computer, and all my desktop folders and pictures were missing. And the finder just kept flashing with screen that said "finder quit while trying to restore all it´s windows" And you had the option between clicking To re-open the windows or not. Thing is, doesn´t matter what you clicked, because the thing kept flashing, so you couldn´t click it.
I ended up using the "killall finder" Code in terminal to close it.
But when that ended, turns out i can´t accsess any of my files. I can search them in spotlight, and if they are images, i can see them, but I´m uncapable of using my folders because they won´t open. Also, if you click the "Finder" app, it just opens the "All my files" Tab, for a split second before closing. I can´t force quit it, because when i open the force quit tab, the finder keeps flashing, so I can´t click it. Finder is killing me.

Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

Sharepoint 2013 explorer view error - problem opening this location in file explorer (HTTPS + Win7 Enterprise 64 bit + IE9 32 bit + Office 2007 32 bit)

Hi,
We have a problem using Sharepoint 2013 explorer view. (Error - We're having a problem opening this location in file explorer. Add this web site to your trusted sites list and try again).
I'm using Windows 7 Enterprise 64 bit, Office 2007 32 bit and IE9 32 bit. And the sharepoint site is a https site.
Some people in my organization are able to browse and some users getting the above error. (with the same client machine configuration)
If I clear my browser cache, closes the browser and open it then the explorer view is working. But after a minute if I try again I'm getting the above mentioned error. This 1 minute expiration happens is since the first time I have used explorer
view, not since I opened the browser.
I have tried the following on my machine:
1. Modified the web client service to run automatically.
2. Verified the sharepoint site is part of trusted sites (https://*.spsite.com/)
3. Compatibility mode is turned on.
4. Tried adding
AuthForwardServerList in the webclient registry settings under parameters. (restarted the web client)
5. Verified the BasicAuthLevel set to 1 (since we are using SSL). Tried setting the BasicAuthLevel to 2 as well. (restarted the web client)
6. Tried installing software update for web folders (KB907306).
Verified the below on the production server:
1. The web application has the root site collection.
2. It has WebDav Publishing disabled under IIS Web Server feature.
Could some one please help me in resolving this issue?
Thanks.

Hi Deepak,
According to your post, my understanding is that you failed to use "Open with Explorer" in a document library.
For your issue, please verify the following:
ActiveX controls must be enabled in IE.
As you are using Windows 7 Server as the client computer, you must install the Desktop Experience feature from Server Manager.
Make sure there is a working Root site collection.
Install this hotfix for windows 7 work with sharepoint 2013 :hotfixv4.microsoft.com/.../463266_intl_x64_zip.exe
Best Regards,
Eric
Eric Tao
TechNet Community Support

View by when opening or saving pdf files

I am currently using Adobe Acrobat X Pro 10.1.4 on Windows XP. When attempting to open or save a file through Acrobat or the Acrobat plugins, the file dialog box will start in the list view. If I attempt to change the view to details, it will change but will change back to list when attempting to open or save again. This has been reproduced on multiple computers which are very similar. This issue is only affecting adobe acrobat, as all other programs (including windows explorer browsing inbetween folders) already are set to show the detail view.
Is there anyway to either make the changes stick, or to permanently have it reset to detail view instead of list view?

This does not seem to be Acrobat issue. It happens with other products too. Tried with Notepad and WordPad and it does not retain the File View settings. File>Open or File>Save dialogs are Windows dialog and settings that affect the file view is totally Microsoft's settings. I was browsing through the same issue and people have complaint about the same etc. However, I could not find the registry key which changes this setting.
Message was edited by: Subrato Namata

ACR 7.0 in Released version of CS6 doesn't open Nikon D800 raw files.

The ACR 7.0 that installs with rhe released version of Photoshop CS6 still won't open Nikon d800 raw files.

Noel - I do use a card reader and always have! I don't go direct from the camera. As I point out, I am working around the problems that are stated above and I am here forcing myself to learn by asking those questions. Thanks though. I’m not ignoring anyone if I were I wouldn’t have all the comments above.
Jeff - I mentioned that I'm a teacher and need to know what I'm doing with the software. Sorry for the attitude.
I am an artist before a teacher it’s just that I like to be proficient when I teach (google me).
Why do you feel such animosity towards education? I’m really sorry I posted here at all.
ssprengel -
I am equally as surprised and not blaming LR4 just making an observation. I have used LR for years and manage a library of over 60,000 images with it. It is my software of choice and will continue to be. But this has become a persistent problem only with the D800 14bit NEF +- 45MB files, all other files from my Nikon DX cameras and my Canon cameras are fine. I’m not blaming LR4 it could also be the Nikon NEF, I just don’t know why LR4 truncates the D800 files and other software doesn’t.
- if I move files using Nikon ViewNX 2 or Windows7 Explorer the files simply move without problem. When I move them using LR4 they become truncated (no end of file error message). If I move them with LR4 and then copy over them into the new folder with the original copy, LR4 corrects and is able to deal with the file in their new destination. (this means a lot of extra work and saving the originals in another directory LR4 doesn’t see).
It's confusing. I have reinstalled LR4 3 times already and checked the hard disks. The bottom line is that both Windows and ViewNX will move the file without altercation. I don’t know why? Yet further confusion. Please realize that I am aware this may be an isolated issue and I intend to ask one of the college techs. to look at the problem.
I am not attacking Adobe, I only use Adobe products with my images and I want it to work that’s why I came here in the first place. I have a lot of money invested in Adobe software both here and all our other licences. Please stop using words like blame, reporting an issue is not blaming. Don’t shoot me I’m just conveying my current (personal) experiences with the product. I’m trying to figure out why and how to make it work.
This is my last post on this thread. Thanks a lot for all your help. I remain a faithful Adobe client and appreciative of all your kind remarks and assistance above.

Newly installed Photoshop Elements 12 doesn't open up on my computer.

I can't get past the task menu bar. how do I open up and use photoshop elements 12? I've clicked on Organizer to start organizing media and that didn't work. I clicked on Photo Editor to launch Photoshop Elements Editor and that didn't work.

Which OS are you on?
Please try launching Organizer and Editor from their exe location instead of welcome screen. On windows, double click the exe located at -
C:\Program Files (x86)\Adobe\Elements 12 Organizer for PhotoshopElementsOrganizer.exe
and
C:\Program Files (x86)\Adobe\Photoshop Elements 12 for PhotoshopElementsEditor.exe
On MAC, click the respective executables from Applications.
Thanks
Andaleeb

Safari doesn't open his own .URL files

Hello
I've adopted Safari for Windows at work due to the good experience I had with Safai on my Mac at home, but I almost immediately I found a serious bug:
Safari for Windows creates ".URL" files perfectly like IE7, by dragging the icon on the left of the address into a folder (or the desktop). Everything' fine here. I use this functionality a lot!
I just opened the .URL file and looks nice. Here's an example:
\[InternetShortcut\]
URL=http://discussions.apple.com/forum.jspa?forumID=1188
The PROBLEM is that when I double click the ".URL" file Safari for Windows just created, Safari NEVER opens, instead opening IE7 !
There must be a registry fix for this, because if I drag the icon into an opened Safari, it opens the link perfectly.
Please tell me what I must change on the Windows Registry to fix this.
Thank you in advance for your support, and keep up the good work!

Replying to my own problem, I think I finally fixed it... by accident!
After a lot of juggling with Control Panel->Add/Remove Programs->Set predefined browser, I finally managed to get IE7 out of the way, but only after deactivating access to Internet Explorer, and a lot of random checks and reboots along the way.
I have no idea why Safari for Windows can't make himself the default browser on URL opening, but I believe you are missing some settings somewhere in the Windows Registry.
Happy bug hunting!

Photoshop CC doesn't open my camera raw files from my new Nikon D800 (ACR v 8.3.0.141)

However, it opens camera raw files from my D300 without problems.
Same for Bridge: NEF files are displayed as generic thumbs.
Can anyone help me?

I don't use the Nikon software, but I believe that the latest version of Nikon Transfer works fine. I think it comes with ViewNX2, which is a free download, AFAIK.
I personally download my photos using a card reader and Adobe Bridge (which comes with Photoshop, and contains Adobe Photodownloader). Not sure, but I think it's included with Lightroom & Elements too (but I don't use those either). Using Photodownloader has the added advantage of being able to add metadata at the same time.

Have installed maverick and now can't open any new pdf files from internet. I can open old ones

I have just installed Maverick. When I use Safari and try and open a Pdf file from a webpage I get a black screen and tells me to download Adobe. I have reinstalled adobe reader but still don't get anywhere. I can open any pdf files I have previously stored or have in downloads or in documents. Any one any ideas what i need to do?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

OER 11.1.1.7 - Asset Navigator doesn't open with an Error - Missing Required permissions attribute in main jar

Hi,
I have installed OER-11g version 11.1.1.7 and am successfuly able to open Asset Editor , ImpExp utility and also could harvest SOA and OSB components.
Issue 1:
However while trying to open the Navigator of the harvested components in OER console, a new window opens with two sections ( top and bottom). The top one which is a diagram view doesn't open with an error - Missing required permissions attribute in main jar: http://localhost:7101/oer-web/applets/components.aler-thinkmapclient-11.1.1.7.0.jar.
Please find the screenshot below.
Issue #2 : While trying to browse for the Assets from OER console. The below error is seen ( missing permissions for components.jexplorer-11.1.1.7.0.jar)
Could someone direct me on how to solve this issue. Appreciate your help !
Thanks and regards,
Sridhar.

It works for me after I did a small tweak by as mine is a demo install.
Idea - is to make an security exception for the OER url in Java control console
Steps to do that :
1.Go to the control panel and uninstall the 64 bit version of Java
Open Programs and Features and select the 64 bit version of Java and select Uninstall.
2.Open up the Java Control Panel
Found as an option in the standard windows control panel
3.Check the version by clicking on the About Tab
If this is not what you expected you can go to java.com and download the latest version.
4.Click on the Security Tab in the Java Control Panel
5.Click on the Edit Site List button in the lower RH corner of the control panel
6.Add your URL to be allowed
Enter the full path that you use to access this such as https://myequallogics.com or the IP address if that is how you access it (as in http://192.168.0.100 - Https is recommended by Oracle.) Once complete hit OK. You should now see the exception on the security page.
7.Close out of the control panel.
8.You can now acess your site through the browser window.
Thanks to Java error: Missing required Permissions manifest attribute in main jar - Spiceworks for letting me know this.
regards,
Sridhar

Lightroom CC 2015 doesn't open

I just installed Lightroom but it doesn't open.
Nothing
Appear UP TO DATE, all ok.
Can I do something ?

Hi RomanoDien…!
Thank you very much for your advice concerning LR CC. It works! All troubles are over. Thank you.
I understand that this issue is a common issue for many of us. You know that all of us users would be very sorry to loose the ability to track all the photographs on several HD’s, if something goes wrong.
I appreciate your help.
Kind regards
Erling M. Pedersen
Denmark
Den 23/04/2015 kl. 09.06 skrev RomanoDien <[email protected]>:
Lightroom CC 2015 doesn't open
created by RomanoDien <https://forums.adobe.com/people/RomanoDien> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7469123#7469123>
After you have installed CC must uninstall Lr 5.
So will works.
Was the same problem at me with Win 7 and it works !
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7469123#7469123 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7469123#7469123
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 16>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Bridge,( Installed, Default .jpg viewer), doesn't open by default jpg files.

Similar Messages

Maybe you are looking for