Bridge is my only hope

I have never backed up my computer and I have recently lost over 70,000 photos. Is there some way that Bridge could have saved thumbnails of these photos? I would be so grateful if even a tiny thumbnail image could be recovered using Photoshop/Bridge. I've read forums where people have said that Bridge is using up gigabytes of computer space and people should purge Bridge to free up space. I'm hoping that the used space may be saved thumbnails of photos. Any help would be greatly appreciated.

Thank you for the responses. I have tried to recover the photos by taking the computer to professional recovery services with no luck. Only a handful were able to be saved. It sounds like the Bridge cache will not be of help either. I knew it was a shot in the dark to recover thumbnails from Bridge, but it was the only hope left.
Thanks for the links to find the Cache in Bridge. I didn't know where to start looking. I'm going to follow the cache links and hope for a miracle, but first I have to muster up the courage and prepare for disappointment.
Thanks for the help. I really appreciate it.

Similar Messages

I can start the Bridge in cs6 only as admin

Hello,
I can start the Bridge in cs6 only as admin, does not work because the worklfow.
I work with limited user rights. Photoshop works not together with the bridge.
What can I do.
Please answer in German.
Thank you
teceasy

Hi Teceasy,
You can post your question to adobe lightroom forum( "http://forums.adobe.com/community/lightroom" ). They might give you some suggestions. Thanks.
Sie können Ihre Fragen an Adobe Lightroom Forum posten( "http://forums.adobe.com/community/lightroom" ). Sie könnte Ihnen einige Anregungen. Dank.

I have CS5 and when I opened up a particular folder in Bridge, I see only a few thumbnails of my images. The rest are this small blue icon. How do I get my thumbnails back?

In bridge on CS5 there is one folder I opened up today and in that folder I can only see a small percentage of thumbnail previews of the images. The rest are this small blue icon. How do I get my thumbnail previews back? If I click on this icon it will open the image up okay in photoshop but I would like to see my thumbnail image to see what picture I am opening up. Can anyone help?

Well ... i purged my cache and the previews came back. Thank you for looking.

Bridge cs6 export - only hard drive option is present. I want ftp and social network module

I want to export my images right from the bridge. Uploading them to different social sites and ftps is a bit of a hassle and it is easy to forget something in the process. It would be so much better if I could just drag files to desired locations/presets.
I've seen something like that in the blogs (but with lower version of CS) where people have facebook and other options. But I can see only hard drive module.
Is it possible? If so - why don't I have this option? What can I do?

If you don’t see the four modules, click the flyout menu and choose “Manage Modules.”
Make sure all four are checked. If you don’t see the four listed, click the little gear, and from ITS flyout menu, choose “Check for Updates.” When you’re through, click the small “Done” button at the bottom to return to the Export Panel main window.
You can start using the export modules directly, but every time you use them you’ll have to go through a long export process. Use presets to streamline this operation, by saving all the work for re-use. You can create multiple presets; for example, you might have several presets for Facebook depending on whether you want to send the images to your wall, or a specific album. We’ll step through the Facebook setup first.
In the Export Panel, highlight “Facebook” and click on the “+” icon at the bottom to Add a new Preset.
The “Add Preset” dialog appears, and the first thing you will need to do is authenticate with Facebook. Note that you will need to authenticate every time you create a new preset, even with the same service, but you won’t need to authenticate when you actually export your images. Click on “Sign In.”
Two things happen: Your browser will be launched, and you’ll see the authentication page from Facebook. You’ll need to enter your credentials, and you can check “Keep me logged in to Adobe Bridge Export Panel.”
Etc. etc.
You can follow the rest of the instructions here:
http://www.tipsquirrel.com/exporting-from-bridge-cs5-to-social-media-sites/

Bridge CS4 Output Only 10 Images to Web Gallery

Hello all,
I have, in Bridge, output workspace, selected 14 imges to be output to the web gallery and only the first 10 images are processed. Any idea as to why? Maybe it is as simple as a setting in the preferences? Thank you so much in advance.

If you are referring to what happens when you click "Preview in Browser", then yes, the output does only include the first ten images.
To preview the full Web Gallery before uploading it, you must generate the Web Gallery and then preview it by double-clicking on the "index.html" file which will cause it to open in your default browser.

Can i tell adobe bridge to look only in certain folders?

I don't want or need Adobe Bridge looking through my entire computer for stills. Is there a way to tell Bridge CC to look only in certain folders.
Let's say that I have a folder called "stills" that is part of a documentary film media folder. I just want Adobe Bridge looking for stills in that one folder and nowhere else. Is it possible to get Bridge searching only in that folder?

Yes, first navigate to the desired folder. Then add this folder as a favorite
This are my favorites:
Then you simply click one of your favorites and Bridge will only show its content

Does Bridge Mode Work only with Apple Router?

Can I use an Airport Extreme Router, in Bridge Mode, as a wireless bridge in a network that does not use an Apple Router?
Situation: Wifi Hotspot from Smartphone connects to Dlink Wireless Bridge in other room allowing Wifi access to printers having only Hard-Wired Ethernet connections. Trying to do the same with an Airport Extreme, with same network name and password, in bridge mode, to provide a PC internet access through the Ethernet connection to Airport Extreme. Cannot seem to get the Airport Extreme in Bridge Mode to function as a wireless bridge on this network.

Are both of your AirPort Extreme models the "ac" version?
So Base Station (2) would be set to bridge mode, hard wired to Station (1). Base Station (2) - I believe in this configuration will broadcast the wireless signal from Station (1), the router, with all DHCP addressing handled by Station (1).
No, Base Station 2 would not broadcast the wireless signal from Base Station 1. Base Station 2 would broadcast its own wireless signal, which it derives from the Ethernet connection coming from Base Station 1.
You don't have to worry about "bridge mode" if you use Apple's "wizard" to set things up in AirPort Utility.
If the wireless on Base 2 is configured to use the same wireless network name and password as Base 1, then Base 2 will act like an "extender", and it will seem as if you have one "big" network. This type of setup is called a Roaming Network.
Base Station 2 would only broadcast the wireless signal from Base 1....IF....Base 2 was connecting using wireless. But, you changed the question to ask about Base 1 and Base 2 connecting using Ethernet.

SBS 2011 - High CPU usage - Help me Microsoft forums! You're my only hope!

My company supports a client that has a SBS 2011 server. For about the past year, we've been fighting a recurring issue with performance on this server. There are about ten local users and four remote users. The server's CPU idles at
about 60%-80% but is usally running when under *any* load from 80%-100%. If you do anything on the console, it will stay pretty much at 100%. These are not power users by any means. The server is utilized for file/printer sharing, Exchange
2010, and one flat file database application (non-SQL). SharePoint is not utilized.
Needless to say, our client is frustrated. When opening files, using their database application, or doing anything Exchange-related, there is a large amount of lag on the client side. First, here are the server's specs:
Make:Dell PowerEdge T420
OS: SBS 2011 Standard SP1
CPU: 2 - Intel Xeon E5-2407
Memory: 32GB
RAID: RAID 1 - Operating System (C:)/Data Volume (E:) | RAID 5 - Data Volume (D:)
Here is what we have tried to resolve this to finality:
* Doubled resources - Initially the server had a single physical processor and 16GB of memory. While these specs alone should have been fine, and were fine when the server was installed, we had periods of time where the server would just sit all day at
100% usage. We doubled the resources and while this seemed like it would fix the issue, we are still seeing abnormally high processor usage.
* Removed all monitoring tools, antivirus, and backup software - As part of our testing, we removed our monitoring agent (LabTech) and antivirus (GFI Vipre). Mozy is utilized for an off-site backup so that was disabled. No dice.
* Verified updates - We made absolutely sure the server was 100% patched.
* Malware/Virus/Rootkit checks - We have ran scans checking for any potential issues with security.
* Ran MBSA and MBCA to fix any issues with the server's configuration.
There is no single process which is using all of the CPU, or we would simply be able to narrow it down. Our calls to Microsoft support have yielded no answers. The last call ended with Microsoft stating that a SBS server should always be running
at high CPU usage. Meanwhile, we have many other clients with less-beefy servers, with more users, who have no issues like these.
So, I'm turning to you all. I will gladly provide logs, configuration settings, even remote assistance sessions if you all can help shed some light on what might be causing my issues.
Thank you!

Some comments/ideas:
How long was the server running after this screenshot? I ask because store.exe is only got a 1GB of RAM which is really low - it should grab most of the RAM within a few hours.
The server was up for about 12 hours. I believe an adjustment was made before to limit the Exchange memory usage.
Strange that SearchIndexer (wsearch service) is so high although that may be a startup condition.
The LT* processes seem to be a 3rd party monitoring tool - no idea why it would ever need that much CPU though (I thought you disabled this?).
We had, but we cannot go forever without monitoring our client's server. It has been pulled off in the past and results on performance are pretty much the same.
The taskmgr process run by amnet_admin has used a lot of total CPU Time. What is it? (can't see the command line).
That's the user I was logged in as when I took the screenshot. Even the task manager seems to eat up the CPU.
The sqlserver process right above it is also busy - may want to look at the command line and figure out which SQL database that is (SBS has 3 - WSUS, Sharepoint, and SBS monitoring)
I believe that's the SharePoint database. They don't currently use their site. Would you recommend a removal and reinstallation? I would not completely remove as I know SBS doesn't like you removing parts of the complete package.
Strange that vds.exe is 10% - that is the interface to the disk management interface IIRC. Perhaps your monitoring service has gone awry here - definitely lose it.
I'll see about pulling it off and I'll see if there are any improvements.
-- Al

JMS Message Bridge with MQ, only BytesMessage available ?

I have successfully set up bridging between MQ and JMS, and have an MDB that receives messages via the bridge when a message producer puts messages on the MQ-queue. Ideally, I would like to receive MapMessages and not BytesMessages which seems to be the case. Is this at all possible ? It is not clear to me if this is determined by how messages are delivered to the MQ-queue or if it is a bridge configuration issue. The message producer uses the MQ Java API and not JMS to produce and publish messages.

The bridge uses the standard JMS API to dequeue the messages from MQ and provides no vendor specific tuning, so as long as IBM MQ supplies a map message in the first place things should work. In other words, if there's any special configuration required to get MQ to deliver map messages, you'll need to tune MQ, not WebLogic.
          Tom
          Bridges aren't often required for receiving from non-WebLogic JMS. See
          http://e-docs.bea.com/wls/docs81/faq/interop.html

How do I load Bridge, it is only pulling pictures from my computer not the preloaded images from Adobe

When I loaded the program, I also loaded Dreamweaver, Bridge and Photoshop all CS6. They are not locating the Bridge Data files. How do I do this?

Now that I read that again, did I misinterpret your request? Did you mean how do you run the bridge program? For that information we would need to know what operating system you are using since windows and macs differ on how programs run.

Help me, BDAqua... you're my only hope

After my G4 MDD's power supply toasted last week, I'm scrambling to get everything moved over to my MacBook so I can keep working. A USB drive adapter is allowing me to transfer the contents of the G4's two internal drives (now removed) to an external Firewire drive.
I'll sacrifice speed to do it right, so what's the best way to begin using the G4's Home (User) folder and other necessary folders on the MacBook, but incorporate newly created files (in those same folders) on the MacBook? In other words, MOST of what I need is in the folders from the G4, but I need to add any new stuff created on the MacBook without losing anything. Is there software (such as Carbon Copy Cloner, perhaps) that will compare two folders and incorporate both of them, using only the newest files between them?
A note to those 'power-users' other than BDAqua: please don't take offense to my request. I'm merely trying to use a little levity (the Star Wars reference in the subject line) to maintain my sanity during this challenging situation. You're all perfectly qualified, and I welcome your input.
Now, bring the Princess and the Wookie to me!

Thanks Rich, but I'm just an L4, which is less than 1/12th of what it takes to be an L5!!! And Kappy is not only an L5, (I think there are 14 in the whole world), but nearly a Double L5!
Here's all I did...
Bought a new iMac/2.4GHz/24"/10.5.0, unpacked it, tossed the Apple Mouse across the room, left the Aluminum KB wrapped up, installed the 4GB RAM I pre-ordered, booted my PPC eMac/1.42/2GB/10.4.11 into Target Mode, started up the new iMac, went through the initial filling out stuff then it gave me a choice of Migrating or not... I did & chose absolutely everything on the eMac... few hours later the iMac booted up looking much like my eMac but just more worthless Eye Candy & things moved around to make it more Windows® like to find things or change settings.
It connected right away to my Dial-up account though my old Saucer AEBS. The new Safari and old Firefox had all my bookmarks, etc.
Eudora & Mail the same, worked fine, (did have to disable Sounds in Eudora as those were no longer supported in Leo.
IIRC I did have to remove a couple of things from System Preferences>Other Row that were Logging errors, but rather smooth other than that
I had also pre-bought DiskWarrior 4.1 because the older versions wouldn't run in Leo, installed that, updated several other APPs
As far as Apps & Utilities, I Migrated 200+ of each, you'd be hard pressed outside of MS, Adobe, & Apple's Pro Apps to find something I didn't have.
Now... the new Macs that come with Snow Leopard will break even more things PPC to Intel, Tiger to Sl things, but I have SL & migrated Leo stuff to t that was Migrated from PPC/Tiger & not catastrophic... just disappointing for a supposed "improved" Leopard.

Help me EJB deployer, you're my only hope...

This request goes to anyone who has administered remote deployment of EJBs to JServer on any scale and has an opinion about it. I'm only looking for a 30,000 foot level response.
My question is, is it possible to deploy the EJBs to a single Oracle Server, and then Replicate them to other servers, or do EJBs have to be deployed to each server directly?
If not, is there a method for automating the deployment of EJBs to multiple Oracle servers other than replication?
I have a management meeting comming up to present recommendations on whether we want to deploy EJBs to approx 250 remote servers over a 56K fixed line connection, or have a central server for deployment and have the clients at those 250 remote sites pointed to the central repository. The answer is obvious to me, go with the central server. But I haven't had any experience adminstering EJB deployment so I need to have some idea of how estimate the cost in terms of work hours, maintenance and $ to administer the remote deployment.

Some comments/ideas:
How long was the server running after this screenshot? I ask because store.exe is only got a 1GB of RAM which is really low - it should grab most of the RAM within a few hours.
The server was up for about 12 hours. I believe an adjustment was made before to limit the Exchange memory usage.
Strange that SearchIndexer (wsearch service) is so high although that may be a startup condition.
The LT* processes seem to be a 3rd party monitoring tool - no idea why it would ever need that much CPU though (I thought you disabled this?).
We had, but we cannot go forever without monitoring our client's server. It has been pulled off in the past and results on performance are pretty much the same.
The taskmgr process run by amnet_admin has used a lot of total CPU Time. What is it? (can't see the command line).
That's the user I was logged in as when I took the screenshot. Even the task manager seems to eat up the CPU.
The sqlserver process right above it is also busy - may want to look at the command line and figure out which SQL database that is (SBS has 3 - WSUS, Sharepoint, and SBS monitoring)
I believe that's the SharePoint database. They don't currently use their site. Would you recommend a removal and reinstallation? I would not completely remove as I know SBS doesn't like you removing parts of the complete package.
Strange that vds.exe is 10% - that is the interface to the disk management interface IIRC. Perhaps your monitoring service has gone awry here - definitely lose it.
I'll see about pulling it off and I'll see if there are any improvements.
-- Al

Bridged network working only with other guests

Hi all,
I have two oracle vm server in a pool with two nics per host.
on one node, my vm has network connectivity with both interface (two separate bridges).
when I start the vm on the other node, one if the nics cannot acces external network but could ping another vm on the same vm server.
My vm.cfg :
vif = ['bridge=xenbr0,mac=00:16:3E:1D:5E:77,type=netfront',
'bridge=xenbr1,mac=00:16:3E:22:09:6A,type=netfront',]
vm server brctl show:
bridge name     bridge id          STP enabled     interfaces
xenbr0          8000.00145e3ef576     no          vif5.0
                                   eth0
xenbr1          8000.00145e3ef577     no          vif5.1
                                   eth1
xenbr0 not working.
xenbr1 working
I'm able to ping the network from host server but not from guest.
ifconfig on the guest show me that some packets are received by the vm.
now my iptable -L output on host:
Chain INPUT (policy ACCEPT)
target prot opt source destination
DROP tcp -- anywhere anywhere state NEW tcp dpt:ftp
DROP tcp -- anywhere anywhere state NEW tcp dpt:http
RH-Firewall-1-INPUT all -- anywhere anywhere
Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED PHYSDEV match --physdev-out vif5.1
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED PHYSDEV match --physdev-out vif5.0
ACCEPT all -- anywhere anywhere PHYSDEV match --physdev-in vif5.0
ACCEPT all -- anywhere anywhere PHYSDEV match --physdev-in vif5.1
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain RH-Firewall-1-INPUT (1 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT icmp -- anywhere anywhere icmp any
ACCEPT esp -- anywhere anywhere
ACCEPT ah -- anywhere anywhere
ACCEPT udp -- anywhere 224.0.0.251 udp dpt:mdns
ACCEPT udp -- anywhere anywhere udp dpt:ipp
ACCEPT tcp -- anywhere anywhere tcp dpt:ipp
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT udp -- anywhere anywhere state NEW udp dpt:domain
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:domain
ACCEPT tcp -- anywhere anywhere state NEW tcp dpts:5900:5950
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:teradataordbms
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:8003
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:cbt
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:8899
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:http
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ftp
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:nfs
REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Any ideas???

Do you have sharing set on the G4? Check your settings on it.

You are my only hope...

I'm very disappointed of WLS (and JDeveloper). Coming from a SJAS background I find that WLS does not enjoy even half the community support of SJAS, and the worst thing is that even WebLogic isn't making a big deal of documentation.
So in wan to secure a webapp. (Fusion webapp) against a database list of users/groups. I looked into it and found about SQLAuthenticator. I said to my self what a great thing... no more need to write my own LoginModule to do that. So I begun to google it to find anything about it... how to use it ( it is not any good if i know: -'hey I can do this! -how? -... silence), but nothing useful.
I kept on going ... I've done a webapp. I wrote a <realm-name> tag in web.xml, I've made a realm on the embedded WLS on jdev (having as provider SQLAuthenticator) ... and run the app. I tried to access a protected resource ... been redirected to login... then entered credentials ... redirected to error page.
Same stuff with DefautAuthenticator(users/roles configured) .... it works...
I've looked into Diagnostics > Log Files > DomainLog nothing
how can I trace the login process?
I need some example how to use this feature, how to configure JDeveloper (this JPS thing is confusing me). I've noticed ( I think this is correct) that in JDev you make users/roles into a jazn-data.xml(this is no good for me because not the developer should establish the users and their passwords, and second this kind of info should be dynamic) that after deploy it is merged into WLS's default realm.
Help me with any link(or anything) that you think it will help me solve this.
Thanks,
Florin POP
I apologize for my inappropriate exposure of things, it must be that for three days I'm dazzling in circles about one thing that's a simple task.

Well what I understood after going through your mail is that you want to develop your own Database Login Module for Weblogic container managed security.
Weblogic's security provider architecture is MBean based, if you are going to develop your own provider it should have a corresponding MBean implementation. Weblogic installation comes with tool that will generate necessary MBean deployment files and implementations for you.
You have to go through the following steps -
1. First of all you need to create the runtime classes for your Custom Authentication Provider
- In your case first of all you need to implement JAAS javax.security.auth.spi.LoginModule interface (here inside login() method you have to implement your authentication logic)
- Implement weblogic.security.spi.AuthenticationProviderV2 interface, please be careful while implementing getLoginModuleConfiguration method and here remember to specify the your custom LoginModule while forming javax.security.auth.login.AppConfigurationEntry and returning it. Also please specify the proper JAAS control flag.
2. Now create an MBean Definition File (MDF) which is basically an xml file containing the MBean definition. (you didn't specify which version of Weblogic Server you are using, assuming Weblogic 10 you may refer this documentation while developing MDF http://edocs.bea.com/wls/docs100/dvspisec/mdf_ref.html).
Run this MDF through Weblogic MBean maker to generate the MBean implementation and intermediate Java files.
3. Once this dynamic class generation is over and you have finished editing the MBean implementation file you need to package them in form of a jar file(MJF) using MBeanMaker.
4. Copy the MJF into the WL_HOME\server\lib\mbeantypes directory and restart the server.
Now you please login to your Weblogic server admin console click on the default realm, you will get this CustomAuthenticator listed as soon as you are trying to configure a new provider for the realm.
And regarding the tracing of login process you may use weblogic.logging.NonCatalogLogger APIs to send messages to the WebLogic server log.
thanks,
Subhasis.

Help me obi wan kenobi, your my only hope... -Strange crash

I am having a strange crash, there is no software trigger and it happens very suddenly. The screen displays garbled pixels and patterny pixelation like this
[IMG]http://imgur.com/5zKYK.jpg[/IMG]
It happens roughly 6 minutes after my computer starts up. if I restart it will crash the Load screen as well, and not boot at all freezing at the load screen. If I wait 20 minutes it will load fully and completely then crash 6 minutes in again.
I had just reinstalled 10.6.3 over what was there and not a complete format of the HD. This was a week ago and I use my computer a lot (4-8 hours a day)
Hapefully someone can decipher the Crash Log and pinpoint a device or software issue that is causing it.
Process: privoxy [109]
Path: /usr/libexec/oah/RosettaNonGrata
Identifier: privoxy
Version: ??? (???)
Code Type: PPC (Translated)
Parent Process: sh [106]
Date/Time: 2010-04-13 14:17:31.794 -0700
OS Version: Mac OS X 10.6 (10A432)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 com.apple.CoreFoundation 0x00011a04 CFRelease + 196
1 privoxy 0x00001b7d 0x1000 + 2941
2 privoxy 0x0000194d 0x1000 + 2381
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x004294cc ebx: 0x0001194d ecx: 0x00007270 edx: 0x00000000
edi: 0x039053d0 esi: 0x00000000 ebp: 0xbffffd88 esp: 0xbffffd70
ss: 0x0000001f efl: 0x00000246 eip: 0x00011a04 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x000fa3a0
Binary Images:
0x1000 - 0x1ff7 +privoxy ??? (???) <44362D88-C1F9-B53C-546B-FCD5B60712CF> /Library/Privoxy/privoxy
0x5000 - 0x17cfef com.apple.CoreFoundation 6.6 (550) <193E33D6-2E92-3452-773B-60A1A9CCC573> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x274000 - 0x274ff7 com.apple.ApplicationServices 38 (38) <8012B504-3D83-BFBB-DA65-065E061CFE03> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x27c000 - 0x420feb libSystem.B.dylib ??? (???) <068CC3F2-F867-A231-A16C-CC01C29A9816> /usr/lib/libSystem.B.dylib
0x4a0000 - 0x4a0ff7 com.apple.CoreServices 44 (44) <AC35D112-5FB9-9C8C-6189-5F5945072375> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x4a8000 - 0x4eeff7 libauto.dylib ??? (???) <FAB17F30-A28B-E33D-6E21-C7119C9C83ED> /usr/lib/libauto.dylib
0x4fb000 - 0x67dfe7 libicucore.A.dylib ??? (???) <FBB66376-CBA9-8149-A1AA-10AB8578C3B3> /usr/lib/libicucore.A.dylib
0x6df000 - 0x78cfe7 libobjc.A.dylib ??? (???) <410DD065-A18F-F054-0457-65525F4D1039> /usr/lib/libobjc.A.dylib
0x7a1000 - 0x7affe7 libz.1.dylib ??? (???) <7B7A02AB-DA99-6180-880E-D28E4F9AA8EB> /usr/lib/libz.1.dylib
0x7b4000 - 0x81efe7 libstdc++.6.dylib ??? (???) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x879000 - 0x87cfe7 libmathCommon.A.dylib ??? (???) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x87f000 - 0x1060497 com.apple.CoreGraphics 1.535.5 (???) <0B93D29C-D957-AD00-10F3-94112D75D6D9> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x1127000 - 0x12e3fef com.apple.ImageIO.framework 3.0.0 (3.0.0) <A37E541F-3D6A-2BE9-AB32-F60CCDE13608> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x133d000 - 0x139dfe7 com.apple.CoreText 3.0.0 (???) <8F4FCAE2-8E6F-F0DE-A6AA-15D0228B7F13> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x13d5000 - 0x1471fe7 com.apple.ApplicationServices.ATS 4.0 (???) <81700C90-2614-F7E2-CC6A-B01C24A2BD75> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x1498000 - 0x1547fef com.apple.ColorSync 4.6.0 (4.6.0) <66ABAE86-B0EC-D641-913D-08ACA965F9FA> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x157e000 - 0x15cfff7 com.apple.HIServices 1.8.0 (???) <B8EC13DB-A81A-91BF-8C82-66E840C64C91> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x15f9000 - 0x160aff7 com.apple.LangAnalysis 1.6.5 (1.6.5) <E77440D0-76EE-EB4C-3D00-9EDE417F13CF> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x1617000 - 0x16bfff7 com.apple.QD 3.31 (???) <40FCAC85-4E4F-2290-90D4-F66D550ADFDC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x16eb000 - 0x16ffffb com.apple.speech.synthesis.framework 3.10.35 (3.10.35) <57DD5458-4F24-DA7D-0927-C3321A65D743> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x170d000 - 0x1721fe7 libbsm.0.dylib ??? (???) <14CB053A-7C47-96DA-E415-0906BA1B78C9> /usr/lib/libbsm.0.dylib
0x172a000 - 0x1784ff7 com.apple.framework.IOKit 2.0 (???) <7618DDEC-2E3B-9C6E-FDC9-15169E24B4FB> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x17a3000 - 0x1a05ff3 com.apple.security 6.0 (36910) <F045B57C-054F-F06F-EF7E-EABEC2700274> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x1ae0000 - 0x1aecff7 libkxld.dylib ??? (???) <152C8DBB-0149-5827-3240-E57CA85CFE5F> /usr/lib/system/libkxld.dylib
0x1af0000 - 0x1e0ffe7 com.apple.CoreServices.CarbonCore 859.1 (859.1) <2E72AF56-4BE6-294A-7372-19C360688B8B> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x1e83000 - 0x1f2afe7 com.apple.CFNetwork 454.4 (454.4) <7C563385-9893-3B48-8607-5BC81DA2C4CF> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x1f8c000 - 0x1fd0fe7 com.apple.Metadata 10.6.0 (507.1) <CBD1B22B-5F10-C784-03A2-35106B97DF3F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x1ff7000 - 0x20c1fef com.apple.CoreServices.OSServices 352 (352) <D9F21CA4-EED0-705F-8F3C-F1322D114B52> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x2120000 - 0x21a0feb com.apple.SearchKit 1.3.0 (1.3.0) <9E18AEA5-F4B4-8BE5-EEA9-818FC4F46FD9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x21d4000 - 0x2207ff7 com.apple.AE 496 (496) <B638FDD4-7322-F0E4-ACEB-777D8A1399E1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x221f000 - 0x22bcff3 com.apple.LaunchServices 360.3 (360.3) <C8590D53-E46A-F58A-7CF2-03A8159D8569> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x22fb000 - 0x2321fff com.apple.DictionaryServices 1.1 (1.1) <07694B30-56A9-5C98-B8BC-DA0628715FA8> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x2338000 - 0x2341ff7 com.apple.DiskArbitration 2.3 (2.3) <E9C40767-DA6A-6CCB-8B00-2D5706753000> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x234b000 - 0x2358ff7 com.apple.NetFS 3.2 (3.2) <E6FD80B0-0238-0C42-A3EC-EBDEC107A1C3> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x2361000 - 0x241afe7 libsqlite3.dylib ??? (???) <16CEF8E8-8C9A-94CD-EF5D-05477844C005> /usr/lib/libsqlite3.dylib
0x2428000 - 0x2465ff7 com.apple.SystemConfiguration 1.10 (1.10) <897AEEAF-CF5D-2843-C33B-31A0A7C98A6A> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x2482000 - 0x24aaff7 libxslt.1.dylib ??? (???) <769EF4B2-C1AD-73D5-AAAD-1564DAEA77AF> /usr/lib/libxslt.1.dylib
0x24b5000 - 0x25b6fe7 libxml2.2.dylib ??? (???) <C242A74D-280A-90C3-3F79-891624AA45D2> /usr/lib/libxml2.2.dylib
0x25da000 - 0x25daff7 com.apple.Accelerate 1.5 (Accelerate 1.5) <F642E7A0-3720-FA19-0190-E6DBD9EF2D9B> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x25dd000 - 0x2626fe7 libTIFF.dylib ??? (???) <6EF87001-6FB4-1405-C588-F6D8042D3534> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x2631000 - 0x2635ff7 libGIF.dylib ??? (???) <51848EBF-27D4-0F85-C22A-D1AE10D328F3> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x263a000 - 0x2655ff7 libPng.dylib ??? (???) <38DD4AA1-0643-85A0-F2F5-EE9269729975> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x265c000 - 0x265eff7 libRadiance.dylib ??? (???) <0E03CF64-0931-7B9A-F617-4387B809D6D8> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x2662000 - 0x2686ff7 libJPEG.dylib ??? (???) <265DBF67-994E-E320-4CB1-9C3DE792C3B2> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x268d000 - 0x276aff7 com.apple.vImage 4.0 (4.0) <64597E4B-F144-DBB3-F428-0EC3D9A1219E> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x2778000 - 0x2778ff7 com.apple.Accelerate.vecLib 3.5 (vecLib 3.5) <3E039E14-2A15-56CC-0074-EE59F9FBB913> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x277b000 - 0x27bdfe7 libvDSP.dylib ??? (???) <8F8FFFB3-81E3-2969-5688-D5B0979182E6> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x27c6000 - 0x2835ff7 libvMisc.dylib ??? (???) <59243A8C-2B98-3E71-8032-884D4853E79F> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x283e000 - 0x2c54ff7 libBLAS.dylib ??? (???) <C4FB303A-DB4D-F9E8-181C-129585E59603> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x2c96000 - 0x30cbff7 libLAPACK.dylib ??? (???) <5E2D2283-57DE-9A49-1DB0-CD027FEFA6C2> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x3251000 - 0x3343ff7 libcrypto.0.9.8.dylib ??? (???) <792B8722-3091-5E9F-E25F-67499CFE0599> /usr/lib/libcrypto.0.9.8.dylib
0x3395000 - 0x3396ff7 com.apple.TrustEvaluationAgent 1.0 (1) <71E2DA16-83EC-6056-FFEE-862A04B5599F> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x339a000 - 0x344cffb libFontParser.dylib ??? (???) <EB089832-660F-0B34-3AC8-CCDA937987D9> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x34db000 - 0x350fff7 libcups.2.dylib ??? (???) <9078BA07-DEE1-6597-D15D-7BE3A20CB5A0> /usr/lib/libcups.2.dylib
0x351c000 - 0x378cffb com.apple.Foundation 6.6 (751) <A61B645E-1A15-5BCA-3043-C8AB85C6AD30> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x389b000 - 0x38bbfe7 libresolv.9.dylib ??? (???) <A48921CB-3FA7-3071-AF9C-2D86FB493A3A> /usr/lib/libresolv.9.dylib
0x20000000 - 0x20098fe7 edu.mit.Kerberos 6.5.8 (6.5.8) <BA9BD282-FF56-3BFD-E78C-7DBE73B48480> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <211AF0DD-42D9-79C8-BB6A-1F4BEEF4B4AB> /usr/lib/dyld
0xfa100000 - 0xfa191fe3 com.apple.print.framework.PrintCore 6.0 (312) <C588530A-0F2C-DD72-E308-3B8735125189> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <068CC3F2-F867-A231-A16C-CC01C29A9816> /usr/lib/libSystem.B.dylib

When it crashes, does it crash with the "kernel panic screen" or simply just freeze? The KP screen looks like this:
http://www.dashboardwidgets.com/showcase/details.php?wid=1665
Right off the bat, from looking at your screenshot it looks like a graphic card dying possibly. What graphics card are u using?
If not the graphics card, then maybe ram which is why I asked if u get the kp screen. Although maybe not likely, I have seen strange graphical glitches when bad ram is installed.

Bridge is my only hope

Similar Messages

Maybe you are looking for