Bridge is very slow when WLAN in enabled

It is nearly impossible to work with Bridge when WLAN is enabled. At every single action Bridge freezes for several seconds. When I disable the network connection the problem disappears, but this is not an acceptable workaround, because I need to connect to network and Internet.
It seam Bridge browses continuously the folders in the network and just stops working when the network resource cannot be reached.
I saw a lot of discussions about that problem in different forums, even with older versions. Adobe seems not to be interested to solve the problem.
I work with Windows 8.1 on a Surface 3 Pro. No other applications shows this behavior.

You are correct. You are NOT addressing Adobe in these user forums.
Just a clarification:
BOILERPLATE TEXT extracted from the FAQ:
https://forums.adobe.com/thread/375816?tstart=0
Do not be abusive or aggressive in your tone
An aggressive, demanding, accusatory or abusive sounding post (like this one of yours here) will often evoke an aggressive or abusive and unhelpful reply (the unhelpful part coming right up ).
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
The volunteer contributors chime in when and if they have an answer for a question. In this case, I'd guess that not too many users use or have used Photoshop and/or Bridge on a Surface Pro tablet. Personally, I've never even touched a tablet or iPad myself.
Bridge is just a file browser, nothing more and nothing less. In its first few iterations it was just Photoshop's File Browser and that's exactly what it was called. Then the marketing folks at adobe came up with the totally artificial notion of the "suites", renamed the file browser "Bridge" and extended it to other applications. Ever since then, Bridge has not been particularly robust when working over a network of any kind.
The "suite" concept is a fabrication of Adobe marketing and bean-counting types. The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.
Bridge, of course, has a separate engineering team.
Sorry, that's all I can say.

Similar Messages

Command execution get very slow when AAA Authorization enable on ASR 1006

Without Authorization , I am able work smoothly with just click on ASR ...., But Once I enable Authorization it takes many secs to move to other command exampe ( If i hit config t or int gi1/0/1 , it take time to move to next command level) ...
These Authorization issue I am facing only on ASR and for Other Cisco Switches and Router its working fine wiith just a click.
Did any one face such issue , and how it is fix ...
See the Show version for ASR
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.1(2)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 23:32 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2011 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
NOITDCRTRCORP01 uptime is 10 weeks, 6 days, 1 hour, 16 minutes
Uptime for this control processor is 10 weeks, 6 days, 1 hour, 19 minutes
System returned to ROM by reload
System restarted at 17:47:32 IST Thu Oct 4 2012
System image file is "bootflash:/asr1000rp1-advipservicesk9.03.03.00.S.151-2.S.bin"
Last reload reason: EHSA standby down
AAA Commands on ASR 1006
aaa new-model
aaa group server tacacs+ tacgroup
server 10.48.128.10
server 10.72.160.10
ip vrf forwarding Mgmt-intf
ip tacacs source-interface GigabitEthernet0
aaa authentication login default group tacgroup local
aaa authentication enable default group tacgroup enable
aaa accounting exec default start-stop group tacgroup
aaa accounting commands 1 default start-stop group tacgroup
aaa accounting commands 15 default start-stop group tacgroup
aaa accounting connection default start-stop group tacgroup
aaa accounting system default start-stop group tacgroup
aaa authorization commands 0 default group tacgroup none
aaa authorization commands 1 default group tacgroup none
aaa authorization commands 15 default group tacgroup none
aaa session-id common
tacacs-server host 10.48.128.10 key 7 13351601181B0B382F04796166
tacacs-server key 7 053B071C325B411B1D25464058

I think your issue maybe related to your tacacs server. If you re-order the two servers (typically a 5 second timer before failover occurs) and see if that improves your performance:
You can try to debug the issue by referring to the command reference guide....i.e. debug tacacs...you can also try to telnet to both ip address to port 49 to see if the connection opens, in order to rule out issues where a firewall or routing to one of the tacacs servers is failing. I also noticed you have the shared secret and tacacs server defined for one of the servers, is the sam present for the other server that is in the server group?
server 10.48.128.10
server 10.72.160.10
to
server 10.72.160.10
server 10.48.128.10
Thanks,
Tarik Admani
*Please rate helpful posts*

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

Bridge is very slow after installing Photoshop CC

I just installed Photoshop CC last night and today Bridge is VERY slow. Every folder I open even if I opened it yesterday has to build some kind of an index.
Also it keeps crashing it never crashed before.

Yes I understand that my point is it only started to do this after I installed Photoshop CC. I have been using bridge CS6 for 3 months and it has never been this slow or crash. IT crashed 5 times today.
Note if you are using the Creeative cloud you may not know this but every 3 months you will have to log in and re accept all the licenses for all the products you open and want to run again, every 3 months. I just learned that today as well.

Yosemite is very slow when i switch on. can someone say why and i can solve the problem??

yosemite is very slow when i switch on. ten or more seconds. why? how i can solve this problem??
Thanks riccardo.italy.

The following items or conditions can slow a Mac. Please see if any of them apply:
1) Are you running any anti-virus/internet security applications?
2) Are you running any "cleaning/tune-up/optimizations" applications?
3) Any peer-to-peer or torrent downloading software?
4) Any third-party disk backup software that came bundled with an external hard drive?
5) Any online backup scheme other than iCloud or DropBox (Carbonite; GoogleDrive; MS One Drive)?
6) Did your financial institution ask you to install Trusteer EndPoint Protection (also known as Trusteer Rapport)?
If you can answer "yes" to any of those questions, you have some unneeded and performance-robbing software installed.

My i phone 4 very slow when downloading from wifi..

please help me out what should i do my ip 4 very slow when downloding with wifi....

From all WiFi networks?

Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.

Hi All, I have a master detail form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
for rec in (select wrrh_col
                  wpbh_col_lvd,
                   wpbh_col_doc_no
      from wh_col,
           wkpl_col,
           wh_col
     where wrrh_col_no = :block.wreh_wrrh_col_no
       and wrrh_col_no = wreh_wrrh_col_no
         and wrrh_col_no = wpbh_col_no
       and wrrh_col_proj    = wpbh_col_proj
       and wrrh_proj_no     = wpbh_proj_no) loop
   if fun_name(rec.wpbh_col_lvd) = 'Y' then
    do something,
   end if;
end loop;
The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
Please advise.
Thanks.

Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.

ITunes is very slow when updating apps

Since a few days iTunes is very slow when updating apps and downloading updates for iPad etc.
Very often a download is ended with the message server reply time to long.
I'm running the latest updated version of iTunes on an iMac mid-2010 with latest OS. I have some 3-4 GB out of 12 GB memory free and 70GB free out of 500 GB storage. I have measured my internet connection speed and it is very good 95-98 Mbit/sec.
I can't see any obvious reason to why iTunes is so slow. Have anyone experienced this? Please help!

Yes! I have the exact same issue. So I tried some things.
I am on Uvese (via wifi) and was trying to update the apps on my PC via itunes. Taking FOREVER. So i tired it directly from my iPhone 6 via wifi - same issue. Then I turned off wifi on the iPhone and updated over (ATT) LTE. That worked great. I am thinking it is a Uverse/ATT issue at this point.

Hello i have an iphone 5 it is very slow when i am downloading app my iphone 4 it is much much better are all the iphone 5 are the same or my iphone 5 have problem please

hello i have an iphone 5 it is very slow when i am downloading app my iphone 4 it is much much better are all the iphone 5 are the same or my iphone 5 have problem please????

Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

Adobe Premier pro running very slow when rendering a file

Adobe Premier pro running very slow when rendering a file

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

InDesign CC 2014 is very very slow when working with a table.

InDesign CC 2014 is very very slow when working with a table. Every 1/2 - 1 hour it nearly falls back, impossible to work with. While this project must be finshed quite soon..
What the hell is the matter with this Creative Cloud. I havea very fast iMac form 2014. I closed all other programmes, even cannot listen to music now. More people with this problem??
Martien

@Martien – How complex is your table?
How many cells? Merged ones as well?
Complex formatting of texts inside the cells?
Complex formatting rules of table rows and/or columns?
Many images inserted?
If yes, and the table is running through many text frames of many pages, I fear, you can do nothing against slowness.
Nothing but: Greek text, not showing the page contents in the Pages Panel, in short: anything you can do to get better performance in redrawing of the screen.
If you have the chance to break up one big table in several parts, do that and edit its parts one after another isolated. Pehaps in different documents.
Then merge the parts in one table, if you want to flow it from page to page.
Uwe

I have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

i have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

dovdov2,
are you saying that when you connect your MacBook Pro to a monitor, your Internet connection slows down, but when you disconnect the monitor, it speeds up again, and that this is reproducible from one day to another?
Does this happen both under OS X and under Windows 7, or only under one of them?
How are you currently connecting your MacBook Pro to your monitor?

Bridge is very slow when WLAN in enabled

Similar Messages

Maybe you are looking for