Bridge kills my color profile

I used ColorEyes to create a great profile for my Thinkpad - even have neutral grays.
Photos look terrific in PhotoShop or any other application except Bridge (v2.1.1.9). When Bridge opens or closes, it sets the profile back to the orginal laptop profile.
Is there any way to stop this? I can reload the new profile every time, but it's easier just to not use Bridge at all, and that seems a shame.
Thanks.

I looked at my canon raw files and they also say untagged. So Apparently the color profile does not get saved in the side car file. Which maybe a good thing. The raw file is suppose to be your negative, in that it doesn't need any color profile until you do something with it in another file format that does support color profiles.
The generate previews will use up more drive space to speed up previewing them. But in general, I never really needed it. So it boils down to what type of system do you have, ex. plenty of drive space, speed of cpu, amount of ram, etc.

Similar Messages

Bridge Filter Tab - Color Profile

I have an iMac (Mountain Lion OS X
10.8.4) Nikon NX2, Nikon
D800E camera, and Photoshop CS6.
Most of the 100 or so photos I
have transferred to my Mac by (USB and
also card) are RAW NEF at approx. 40MB a file. (Lossless compression) Most all of these pictures are in Color Space Adobe RGB, because that is
what I set up on the camera.
When in Bridge > Filter Tab > Color Profile > [this says that the majority of the NEF
photos , in the camera’s Color Profile Space of Adobe RGB, are not in this
color space, but the color profile of “UNTAGGED!” I’ve studied all the preferences and options of
Bridge and I am not 100% that I know what to change so these photos will show
in the color space I want them to and I don’t want to make a mistake by
clicking something that I can’t undo so…
How do I
get these photos (which I guess are showing up in Bridge as sRGB color space)
to show up in Adobe RGB. And if I can
change this, what could be the good or bad consequences of changing to Adobe
RBG?
There is
also a Thumbnail Option – “Generate 100%
previews. Will checking this show the previews at 100%? And what consequences does using this have?
Thank You Very Much For Your Help,
Thank You,
Sandy

I looked at my canon raw files and they also say untagged. So Apparently the color profile does not get saved in the side car file. Which maybe a good thing. The raw file is suppose to be your negative, in that it doesn't need any color profile until you do something with it in another file format that does support color profiles.
The generate previews will use up more drive space to speed up previewing them. But in general, I never really needed it. So it boils down to what type of system do you have, ex. plenty of drive space, speed of cpu, amount of ram, etc.

Bridge doesn't recognize color profiles

Dear Adobe community,
I'm using Adobe Bridge CS5.1 (4.1.0.54) and Illustrator CS5.1 (15.1.0), and I'm experiencing a very confusing and disturbing color management problem between these two applications. In short, for some unknown reason Bridge doesn't seem to respect or simply cannot read CMYK color profiles that I've applied to an artwork within Illustrator, but rather labels the file as "Untagged" and displays it with clearly desaturated colors. To illustrate the problem I've created some screenshots having Bridge on the left hand side and Illustrator on the right displaying the same illustration with various color profiles applied. That is, in each case I assigned different color profile to the image in Illustrator, saved the file and took the screenshot of Bridge and Illustrator both displaying the image. Now if you look closely then perhaps you notice that the only time I got a visual match between these applications was when I switched the file to a RGB mode within Illustrator. But even then Bridge did not recognized the correct color profile but interpreted it as "Untagged". Here are the screens:
Bridge "Untagged" vs. Illustrator "U.S. Web Coated":
Bridge "Untagged" vs. Illustrator "Coated FOGRA39":
Bridge "Untagged" vs. Illustrator "Don't Color Manage This Document":
Bridge "Untagged" vs. Illustrator "Adobe RGB":
Hope you could see the difference from these tiny images. Looking from my monitor, I can tell you for sure that they are definitely off, except the RGB versions of the illustration. This made me surmise that perhaps Bridge can only display Working RGB profiles correctly and not anything else.
Here's also my color settings, just in case…
So... Why is that??? Why are these applications showing me different results while my color settings are supposed to be "Synchronized"? Is there a way to fix this? I have tried to play around with the settings and looked for a solution in the web but to no avail. Could you please help me to find a soulution to this disturbing problem?
All the best,
Juhani

You may have used the broken global Purge Cache command in Bridge Preferences, or the cache is otherwise corrupted. Try Purging the Cache through the Tools menu in Bridge for each folder. Tools > Cache > Purge cache for 'foldername'.

Why is Bridge reporting color profiles incorrectly?

Why is Bridge seeing this image as an Adobe RGB when it is really Colormatch RGB?
I am using CS5 on Windows 7 64bit. I have purged the cache and did a full restart of the OS.
1.       The top dialog is Bridge and it is reporting the image as Adobe RGB (1998) in three places.
2.       Next, with Photoshop’s rgb color setting is set to Adobe RGB and I get an Embedded Profile Mismatch.
3.       I reset the color setting to Colormatch an opened the file without a mismatch. The status bar Document Profile confirms Colormatch
4.       In the convert to Profile dialog, the source profile is Colormatch. (Is this a reflection of the working space setting?)
5.       In file Info Raw Data Colormatch is reported.
6.       I then opened the image as a TXT file and found a tag for Colormatch. There is no reference in the TXT file or Raw Data to Adobe RGB (1998).
Why does Bridge report this image as Adobe RGB (1998) when the file seems to have no reference to Adobe RGB?

I am assuming that some remnant of a former state of these files is causing Bridge to report the color profile incorrectly.
I made a workaround to fix these files by creating a Droplet (With 'Save on Close' and 'Override Action "Save As" Commands.) to run an action with the following steps:
Convert color to Lab.
Convert color back to RGB. (Working space:Colormatch RGB)
Assign Profile to Colormatch RGB.
Save As. (With ICC Profile: Colormatch RGB checked.)
Close.
With Profile Mismatch Warning set to' Ask When Opening', the droplet stops on any images that are not Colormatch and resumes after making a selection.
This is correcting the files and they are now reading correctly in Bridge.

My color profiles does´nt show in bridge

Before going totally insane i ask here....
im useing CS4 premium
Images: .psd, gif, jpg ect shows tagged colorprofiles in bridge
But InDesign Documents and illustrator documents shows colorprofiles as :untagged
WHY?! I have assigned a profile etc etc and no matter what it says: Untagged
im going ballistic. Cant you tag a colorprofile to a indesign/illustrator document ore what is going on?!
Even my PDF´s are :Untagged
I use color management in Bridge with same settings for all programs: Preserve color profils...etc
My god- someone please help coz im going absolutely desperate
tnx guys

I do not know anything about InDesign or Illustrator., and have not had to get into color profiles. Having said that I believe Bridge writes that info to XMP file, unless you have it in database (which some experts say in lunacy).
I do know that Illustrator uses a data base for keywords and perhaps the other stuff as well. If you want Bridge to read it you have to check some option that says something like - export data to metadata.
Hope that helps.

How to chnge cmyk and also apply color profiles in bridge

Hi
i want to apply color profile for selceted files in brige

Does any one know how you can adjust the font size (point size) for the file
names.
Sadly enough you can't chance that, feel free to add a feature request for
that, the more there ask for the bigger chance it will be realized.
It would be great if the colors for the image name (background and font color)
could be changed so the contrast could also be increased so it is also easier
to read.
And this the cheerful part, go to Bridge preferences General tap and play
with the sliders for user interface and Image Backdrop until your satisfied.
BTW using the slider for thumbnail size bottom right of the Bridge window to
increase the thumbs does not increase the font but makes it nevertheless a
little clearer.

Adobe Illustrator Export to JPEG (*.JPG) vs ICC Color Profiles vs Behance

Hi,
I work with Adobe Illustrator CC 2014. When I export my projects into *.JPG format (using both: 'Adobe Illustrator > File > Export' and 'Adobe Illustrator > File > Save for Web') I use ‘Embed ICC’ profile option. Every common image viewer I use (including web browsers and Adobe Bridge) respects those color settings and displays exactly what has been embedded. But when posting on Behance, my color settings are converted into something else! The only solution is to place my Adobe Illustrator file into a new Adobe Photoshop document , then export it into .JPG (with embedded color settings) and then post it to Behance. With this workaround my colors look pretty correct.
Did someone experience the same and could explain why Behance doesn’t respect the Adobe Illustrator export with embedded ICC profile settings?
one thing more – even if my *.JPG produced with Adobe Photoshop (the correct one) is displayed correctly, the cover photo (taken from the original) is still converted into different (Behance’s default??) color space. I believe this shouldn’t work this way. Is there any workaround to this? Is there any way my covers (miniatures) display the 'true' colors?
Please advise
Best Regards,
Pawel Kuc
ccmutants.com

ok. I give up. It seems that Adobe Illustrator can export only to the JPEG File Interchange Format (JFIF) and Behence doesn’t fully support this format (for example it cannot read its icc color data correctly):
(JPEG) Formally, the EXIF and JFIF standards are incompatible. This is because both specify that their particular application segment (APP0 for JFIF, APP1 for Exif) must be the first in the image file. In practice, many programs and digital cameras produce files with both application segments included. This will not affect the image decoding for most decoders, but poorly designed JFIF or Exif parsers may not recognize the file properly (http://en.wikipedia.org/wiki/JPEG_File_Interchange_Format#Exif_comparison)
I’ve analyzed my files using JPEGsnoop 1.6.1 (really cool app by Calvin Hass, http://www.impulseadventure.com/photo/) and here is what I’ve found:
A) *.jpg produced with Adobe Illustrator > File > Export > JPEG > ICC profile embedded:
*** Marker: SOI (xFFD8) ***
OFFSET: 0x00000000
*** Marker: APP0 (xFFE0) ***
OFFSET: 0x00000002
length     = 16
identifier = [JFIF]
version    = [1.2]
density    = 72 x 72 DPI (dots per inch)
thumbnail = 0 x 0
B) *.jpg produced with Adobe Illustrator > File > Save For Web > JPEG > ICC profile embedded:
*** Marker: SOI (xFFD8) ***
OFFSET: 0x00000000
*** Marker: APP0 (xFFE0) ***
OFFSET: 0x00000002
length     = 16
identifier = [JFIF]
version    = [1.2]
density    = 100 x 100 (aspect ratio)
thumbnail = 0 x 0
C) *.jpg produced with Adobe Photoshop > File > Save As > JPEG > ICC Profile embedded
*** Marker: SOI (xFFD8) ***
OFFSET: 0x00000000
*** Marker: APP1 (xFFE1) ***
OFFSET: 0x00000002
length          = 1320
Identifier      = [Exif]
Identifier TIFF = 0x[4D4D002A 00000008]
Endian          = Motorola (big)
TAG Mark x002A = 0x002A
EXIF IFD0 @ Absolute 0x00000014
Dir Length = 0x0007
[Orientation ] = Row 0: top, Col 0: left
[XResolution ] = 720000/10000
[YResolution ] = 720000/10000
[ResolutionUnit ] = Inch
[Software ] = "Adobe Photoshop CC 2014 (Windows)"
[DateTime ] = "2014:08:02 17:21:15"
[ExifOffset ] = @ 0x00A8
Offset to Next IFD = 0x000000D4
EXIF IFD1 @ Absolute 0x000000E0
Dir Length = 0x0006
[Compression ] = JPEG
[XResolution ] = 72/1
[YResolution ] = 72/1
[ResolutionUnit ] = Inch
[JpegIFOffset ] = @ +0x0132 = @ 0x013E
[JpegIFByteCount ] = 1006
Offset to Next IFD = 0x00000000
EXIF SubIFD @ Absolute 0x000000B4
Dir Length = 0x0003
[ColorSpace ] = sRGB
[ExifImageWidth ] = 200
[ExifImageHeight ] = 200
So unfortunately the only option to produce the EXIF JPEG from an Adobe Illustrator project is to: Export *.ai file to JPEG (under Adobe Illustrator) > go to Photoshop > Create new project > Paste the *.jpg > and Sava As JPEG with icc embedded.

Color profiles do not stay synchronized across all applications in CS6

I've recently uopgraded my system to Maverick. Using Adobe CS6 Suite. It seems as of late when selecting a color profile for the creative suite, the application does not keep the color setting. They say synchronized but when reopening to check again, it says unsynchronized.
Also, When making a PDF from InDesign, Illustrator or Photoshop, the colors look dead and darker in the PDF. Again, the Acrobat color prefs say "unsynchronized". If I go to Bridge and re-apply the profile, all is fine, but on reopening the color prefs in Acrobat they are back to "unsynchronized". This also happens in InDesign and Illustrator.
All this an more. I work with a client who is the inhouse graphics manager. We run the same software and the same profiles, yet the same color files look different on his computer than on mine.
Can someone shed some light on this issue. Been doing this many years and have not had this problem.

Not all that familiar with Color sync but bridge should be acting as the central and when you have selected the correct color profile in Bridge CS6 under the menu edit / color settings all CS6 applications should have this profile / setting show.
In your case I would start to reset preferences for Bridge with holding down option key while starting Bridge and from the menu choose reset preferences.
Maybe even do this with al other CS applications if only bridge does not help.
And this is no help to you but I'm still not on Mavericks but if I make the switch I don't use the option for upgrade but make a day free to install everything from scratch. For normal use with a few apps it might not be important to do so but with a lot of apps and daily use in a professional workflow I always go for security versus speed

Acrobat 9 Pro color profiles?

here is my situation:
I create multipage mockups in Illustrator (all of my Adobe software is Creative Suite 5 Design Premium running on Win7 32bit [I wish it was 64, but printers don't like it so.. yeah]) and after creating them , i then save them to a modifed PDF Preset PDF file.
My problem is this: All of my color profiles are synched via Bridge for uniformity. I know this doesn't apply to Acrobat (though it should, and if it does it doesn't say it anywhere that i've found). The original Illy Document has a profile embedded and the colors look and print out just like i need them to. the pdf version however seems to not like that idea and appears to have different profiles for each page. I have made sure that the color profiles are included and no color conversions happen.
Why am i getting this?
I can provide a sample set of files so you can hopefully see what i see if you need them.
I do not know that much about any advanced features of Acrobat, so it may be setting that I'm not aware of or something like that. Color is also not a very high priority (though i really wish it was) in my workflow and thus my understanding of it is also fairly limited. Color theory in college doesn't count i don't think

This may have nothing to do with your problem, but -- at least with Acrobat 8, there is a 100MB limit to the scanned image. Are you trying to scan something larger than that?

Why can't I include a color profile when exporting to PDF?

I've a basic RGB illustrator file - no embedded or linked images, just flat colors and gradients.
I'm working in sRGB space and this is reported correctly in the info field at the lower left of the editing window.
Some issues:
1. When I look at this file in Bridge it's listed as 'untagged'. However if I re-open it in illustrator it's reported to be sRGB as expected.
What's broken here?
...and of more immediate concern:
2. Despite requesting 'Include All Profiles' on the output page of the PDF save dialog I cannot get a PDF exported that includes the sRGB profile.
Same issues in both CS6 and CC - Windows 7, 64.
Thoughts, comments or suggestions welcomed....
Thanks

Your .pdf is fine, if you open the .pdf in illustrator, adn hten do edit >> assign profile, this radio biutton will bo on what the profile. Also in the bottom left of illustrator you can see what color profile your document is saved with, btuy turning that on.
Hold down option adn you will get other fun easter egg options
Bridge only seems to show profiles for certain bitmapped formats, except .psb format.

Why Won't Photoshop Sync my Color Profile Settings?

I am using a Lynda.com tutorial for color management by DEKE MCLELLAND and after following his instruction to change my color management settings in BRIDGE AND ILLUSTRATOR to use the color profile ADOBE RGB (1998), I receive this message when switching to Photoshop to check if it has synced as well as the other two programs: "The color settings file contains settings that are not supported by this version of Photoshop running on this system. These unsupported settings will be reset to their default values."
I have tried several times and it simply will not sync
I am using a MAC PRO (late 2007) 10.9.4.

You are the perfect candidate for Adobe Support CHAT. You will speak with someone from India, but they are very smart, and very polite. It may take an hour or so, but every problem of this type I've had, they have been able to solve.
http://helpx.adobe.com/contact.html?step=PHSP
Just fill in the stuff until you see the "Contact Us" link, after which you will see the CHAT link.
Be patient, and good luck.

Need correct color profile settings in windows....????

Help! Just replaced the motherboard and now all the color profiles in photoshop are wrong.... Does anyone know the correct settings to choose in windows or to choose for the graphics card... it's an AMD Phenom II. I open Adobe Bridge and immediately the previews lose their color which tells me this is not the correct profile the computer is telling photoshop... can anyone help, please????

operating system is windows 7 and the monitor is profiled correctly.... and these are raw images, so no, cannot view in another program.... and they look the same in ps as in bridge. however, i called adobe and they told me it sounds like a graphics card issue, so i'm going to amd's website to update and reinstall drivers.... not sure what else to do....
From: rogleale <[email protected]>
To: Kelly Ferreira <[email protected]>
Sent: Friday, June 10, 2011 11:21 AM
Subject: Need correct color profile settings in windows....????
Not enugh information. Which OS? Is your monitor profiled? Can you see your images in any other program, eg Windows Picture Viewer?
What happens if you open your images in PS instead of Bridge?
Roger

PS CC 2014 stopped to respect the setting to preserve embedded color profile, why?

My normal workspace is Prophoto RGB. I, however, has a large number of tiff files (dias'es scanned with a Nikon scanner) with the color space sRGB. Up till recently I had no problems - all the files kept their embedded color profile when opened in PS. I Even have the checkbox that tell PS to ask if there is a mismatch checked on. PS does not ask used to do so). This has happened after my last update of PS from PS CC to PS CC 2014. I have deinstalled Ligthroom to see if synchronization migth cause this. That did not help.
Please help.
Birgitte

Sorry, I do not hope that I have got something fundamentally wrong. I hope not! Otherwise please correct me!
All my own files start out as Nefs and are from Bridge brougth through ACR and on in PS as Prophoto RGB 16 bit files.
Since I also work with files that are not my own Raw files as the scanned Tiffs (scans of my 50 years old slides - scanned by somebody else on a Nikon Super Coolscan 9000 ED), Tiffs from other people or even JPEGs, I have set PS to preserve embedded color spaces and to alert me if there isn't a match between my workspace (the Prophoto RGB) and an allready embedded color space. This because I did not think it advisable to change to Prophoto RGB from Adobe RGB orsRGB as the extra colors in Prophoto RGB never were present in the Adobe RGB or sRGB files and therefore could not be "conjured" up. I, however, got the impression that 16 bit would still be an advantage when editing.
I like to start any one-layered file in ACR before entering it into PS and do not want to change that. Up till now PS nicely warned me of color space mismatches but not with these scanned files. So my present worry is if the color space of the files from the Nikon scan may be changed from a smaller to a larger space (which would not be a good idea, or?) when going into PS. I speak only of files that enter PS from ACR with ACR workflow settings of Prophoto RGB 16 bit and with the color settings of PS as described above.
As I wrote earlier today, I am beginning to think that these files do not have a color space assigned until they get into my software but I do not know enough of the Nikon Scanner to be sure. If so everything is OK and PS functions perfectly.
As written above Bridge shows the scanned Tiffs to have the Nikon sRGB 4.0.0.3001 as color profile but below in Camera Data (Exif) it says "Exif color Space: Uncalibrated".
Does anybody know if these files in realty does have an embedded color Space before entering the software outside of the scanner?
I hope my English is understandable! Please forgive the 73 year old grandmother if she has got it all wrong!
Git

Problem using custom color profiles in Camera Raw

Dear Adobe Community,
I've created a custom color profile using the DNG profile editor, and I've been able to open that custom .dcp file in Adobe Camera Raw (ACR) through Adobe Bridge. However, when I apply the color profile to the same image, I do not get the same results as I get with the profile editor. When I open the "corrected" RAW file in Adobe Photoshop, the colors are the same wrong colors that I have in Bridge, am I missing something here?

Yes, you're missing something.
Camera profiles are meant to account for different spectral distribution in different light sources, which is something else than different color temperatures. You still have to make all the normal adjustments, like white balancing, to get the image right.

Suddenly, Bridge displays photo colors wrong

I've been using Photoshop Elements for several years--frequently--like almost daily. I'm currently using elements 6.0 with Bridge. I always view my photos in bridge before doing anything else. All of a sudden, starting last week, when I open a folder in bridge, I can see in the thumbnails that the colors are OK, but very shortly thereafter, and/or when I click a thumbnail to preview an image, it drastically changes the colors in both the thumbnails and the preview. Like--a bright red rose becomes a dull muted red. A deep purple flower becomes bright blue. It's driving me nuts. I can't find anything in Bridge preferences. I am not a user who knows a thing about "color profiles" or anything else--I tweak photos individually using fairly simple features in Elements (use the Levels tool, adjust brightness and contrast, once in a while futz with hue or intensity for the photo, stuff like that).
I haven't to my knowledge set anything globally. I haven't that I can recall installed any automatic update to the adobe products. I'm using the same camera, the same memory cards. I've never had this happen in hundreds upon hundreds of uses of bridge & photoshop, and many thousands of photos, and now it's doing it constantly.
A week or two ago I was futzing with hue & saturation on some individual photos, but that batch of photos was all fine and I didn't notice that it affected anything other than the photo I was working on. Could I have set something somewhere accidentally and never known it? I've searched the help for bridge & elements, searched the forums and found some similar questions but they don't seem to be the same situations.
Help me, Mr/Ms Wizards!

Elf1elf wrote:
…All of a sudden, starting last week, when I open a folder in bridge, I can see in the thumbnails that the colors are OK, but very shortly thereafter, and/or when I click a thumbnail to preview an image, it drastically changes the colors in both the thumbnails and the preview.
What you're seeing in Bridge is perfectly normal, expected behavior.
Initially, Bridge displays a thumbnail straight from the in-camera converted and embedded JPEG preview embedded in the raw file. Then, Bridge calls upon Adobe Camera Raw to build its own rendering from the raw data themselves. Because the rendering criteria for ACR are not designed to emulate the in-camera raw-to-JPEG conversion, there will be a definite change in the images.
I cannot speak to Elements because I don't use it, nor are most regular posters familiar with that very limited, emasculated application. We use the full, professional-level version of Photoshop. Elements is not the same as Photoshop. The differences are great and varied. Last year I did buy a license for Elements to use on a laptop, but successfully demanded my money back from Adobe.
If you're seeing a marked difference in the display of the thumbnail and the final rendering of the same after a few seconds, check your preferences. Make sure that the box labeled "Apply Auto Tone Adjustments" is NOT checked in the Camera Raw preferences. This will minimize the differences.
You may want to trash your Bridge preferences first by launching Bridge while you hold down the Option key. Then make sure the "Apply auto tone adjustments box" is NOT checked.
Whenever an application begins to act weirdly "suddenly", that's a sign of corrupted preferences that need to be trashed.

Bridge kills my color profile

Similar Messages

Maybe you are looking for