Bridge labels cause metadata issue

It seems when I apply a color label in Bridge to a PSD file (let's say the yellow label, or even a star rating), then open that PSD file... edit it... then save it. I then look at it's metadata in Bridge and notice that the Copyright status went from "unknown" to "public domain." Does anybody know why this is happening?
Even more wacky is when I remove that label and reset the copyright status back to "unknown" in Bridge CS5. I then re-open the PSD file
, make a simple edit, and the save it. The copyright status in Bridge's meta panel goes from "unknown" to "public domain" once again.
I tried this on a friend's computer running CS4, and it does the same thing as well... so it does not seem to be an isolated issue to just my machine.
Thanks

Hi Melissa,
Thanks for your response.  I am also noticing that when I create a new PSD CS5 file (let's call it "test.psd"), and then "place" a file that has a label or rating into test.psd, and then save test.psd...  Test.psd's copyright status goes from "unknown" to "public domain."
I notice that this situation also happens a lot when I "edit in Photoshop" from Lightroom (when the image in LR has a label or star rating).  I always have to check the saved file's meta to see what got messed up, which is really inefficient and cumbersome.
I agree with changing it in File -> File Info, but if I forget to do that every time I open and save this file, it goes back to "public domain."  That's a really embarrassing thing for such a robust (expensive) piece of software to not be able to do correctly.
Thank you for responding!

Similar Messages

  • My macbook pro keeps freezing and shutting off when I am browsing the web on Safari.  How can I figure out what is causing this issue?

    For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black.  I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots.  I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit.  Any suggestions of where to start to solve this issue?
    Thanks!

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • How do I import Bridge keywords and metadata to CS6 from CS4 so that I don't lose them if CS4 is not

    I have hundreds of keywords and metadata including Ratings and Labels using CS4 and Bridge CS4.
    It is time to replace my PPC Mac with a new Intel Mac.
    I am going to install CS6 on the new Intel Mac without installing CS4.
    By default.... this eliminates ALL keywords and ratings and labels from my Bridge browser. The keywords will still be present on the files but Not present in Bridge keywords list and all ratings and labels will be lost.
    Making a copy of Bridge CS4 metadata to another computer is quite simple.
    Simply copy All of the Bridge CS4 application support folder to the other computer.
    The question then becomes.... can I aslo do this with CS6 without introducing an incompatibility?
    1. incompatible due to CS6 application support.
    2. incompatible due to transfer from a PPC (APM) to Intel (GUID).
    This concern results from an Bridge CS4 export problem I experienced.
    Bridge CS4 will export all of your keywords and you can import them from a text file but it has some odd troubles. (try it and you will see)
    This does Not mean that CS6 has the same troubles.
    What do I require to preserve existing metedata and keywords that exist on a PPC using CS4 and import them into CS6 using Intel?
    Sound simple?
    I doubt it.
    The points are.
    1. CS4 not installed.
    2. CS4 source is PPC not Intel.
    3. Ratings and Labels are metadata that Are Not part of the file metadata and unique to Bridge only.
    4. Keyword Search and keyword Use requires that Bridge have keyword list, otherwise Finder is the far more useful browser and the new version of Bridge will require hours of keyword listing.
    I don't want to spends hours retyping keywords lists in Bridge.

    Ratings are NOT placed into the file under CS4 Bridge and neither are
    Labels.
    That depends on your file type and settings voor Camera Raw.
    Like Curt stated usually metadata is written in to the file itself. Only Raw files can't be written to and by default they create a XMP file, also called Sidecar XMP files (and do have the same filename, only a different extension called .xmp). These files are also by default hidden in Bridge but If you use Bridge to move files they travel along with the original.
    If you move or copy them using finder you have to be sure these XMP files are also copied with the originals to the new location.
    Using the menu View / show hidden files should reveal the XMP files.
    An other option for the Camera Raw prefs is to set metadata to the Camera Raw database instead of written to sidecar XMP files ( to my knowledge using sidecar files has been the default since about CS3).
    Now here it becomes a bit tricky and I only can tell you my findings, not to be confused with true facts. (and mind you, it is at least 5 years ago I was on a PPC and not even remember which OSX 10 was able to work on it, I just present the acting of CS6 on an intel Mac Pro with OSX 10.7, but I don't believe the difference in location is that much)
    Having written the Metadata to the Camera Raw Database your image settings get written to a file in the user library preferences folder called logically "Adobe Camera Raw Database". But also some info gets added to the Camera Raw Cache folder (User library / Caches/ Adobe Camera Raw) in a file called index.dat.
    Also not having set metadata to xmp sidecars stores the ACR settings in a new .dat file with a unique number (not to be traced as a corresponding filename. And also the default maximum is set to 1 GB of space and when full the oldest files are overwritten with the new ones.
    Personally I use converted DNG files that are capable of writing metadata to so all info and settings are in the file itself and I don't need to bother about central storage that can get lost. The downside is that changes to a DNG need to save the whole file instead of a small xmp file and probably reading cache takes more time then getting info from central storage but I like to be on the safe side and speed is not really needed to be nailed down to split seconds in my workflow.
    Keywords are stored as a file in the Bridge preferences but Like Curt already stated exporting the old list first and then via the same route import again to CS6 should solve your problem and they will be back as persistent, otherwise the files in the content window show as italic and sadly enough have to be made persistent one by one with right click mouse menu, so that is not really an option for you.
    Exporting the list does create a text file that can also be altered manually with a simple text app and as said, again be imported in newer versions as Curt described earlier.
    Making a copy of Bridge CS4 metadata to another computer is quite simple.
    Simply copy All of the Bridge CS4 application support folder to the other computer.
    Well, in fact it is true to call copying this folders a simple task but replacing the existing new CS6 would not be my method. The biggest change for Bridge CS6 was the transition to 64 bit and I lack the knowledge for this but also cache format for thumbs and previews has been different for every version.
    But if you have located the CS4 folder for Bridge in your PPC user library / application support / Adobe / Bridge CS4 you should find a file called 'Adobe Bridge Keywords.xml' and it is fairly safe to replace this CS4 version with the new CS6 version.
    Also custom settings for the output module can be copied (however to my memory the option for custom settings in Output where introduced in CS5) and collections can be copied.
    So for your keywords the copy option might work, rating and labeling for Raw files they will be read in CS6 if they are stored as XMP. ACR settings idem but CS6 ACR has a new (2012) conversion mode that has different settings that do not work with previous settings (unless you first choose to use the 2010 conversion as default Raw setting.
    If it is in the Central Data Base I would start trying to replace the CS4 with the CS6 edition (after back up of existing CS6 version) and see what happens. If it works your out of trouble.
    You can also open the Camera raw Database as a text file but there is a lot of data in. Maybe scripting would be able to reveal those data and transfer to XMP but you have to visit the dedicated Scripting forum for this.
    And while you state to have not installed CS4 anymore it might be wise to reinstall it (but first make a proper back up of the previous mentioned folders and files to be on the save side.
    This gives you the opportunity to export keywords properly and if needed you can use Show Items from subfolders option with filter and set preferences to XMP sidecar to refresh the rating and labels to those XMP files. Just an escape route that might not be as painstakingly as it looks at first sight, just use the options for Bridge to filter.

  • Could the replacement of a fan on a graphics card cause OS issues?

    [Dangit - I unintentionally posted this in the iMac forum first - meant to post it here]
    OK I suppose it's a bonafide long shot that my replacing of an intermittently malfunctioning fan on a graphics card could cause OS issues, but I've had something immediately crop up after the replacement (crippling issues with Logic's 32-bit audio unit bridge), and they effect older projects that were previously stable, so I figured I'd ask for the heckuvit.
    Repairing permissions hasn't helped - I'm just starting to ponder whether to reset PRAM, reset SMC, boot from an HD clone, try reinstalling the old fan, etc., in order to figure out the problem....
    BTW - the graphics card is an Nvidia GT120.

    Go out and buy an Apple ATI 5770.
    What requirements does Logic have for video, and are you still on 10.6.8?
    The GT120 is 512MB but low-end card.
    If you do need more performance:
    SHOOTOUT WITH THE 'SHARKS': Sapphire Radeon HD 7950 for Mac versus really fast alternate GPUs

  • Could simply replacing a fan on a graphics card cause OS issues?

    OK I suppose it's a bonafide long shot that my replacing of an intermittently malfunctioning fan on a graphics card could cause OS issues, but I've had something immediately crop up after the replacement (crippling issues with Logic's 32-bit audio uinit bridge), and they effect older projects that were previously stable, so I figured I'd ask for the heckuvit.
    Repairing permissions hasn't helped - I'm just starting to ponder whether to reset PRAM, reset SMC, boot from an HD clone, try reinstalling the old fan, etc., in order to figure out the problem....
    BTW - the graphics card is an Nvidia GT120.

    Go out and buy an Apple ATI 5770.
    What requirements does Logic have for video, and are you still on 10.6.8?
    The GT120 is 512MB but low-end card.
    If you do need more performance:
    SHOOTOUT WITH THE 'SHARKS': Sapphire Radeon HD 7950 for Mac versus really fast alternate GPUs

  • Error message is not telling which field causing the issue!

    Hello
    I am developing the Adobe Interactive Form and launching this form from WebDynPro ABAP application, fine.
    This form has tonns of dropdown fields, mandatory fields, greyed out fields. Fine.
    I am filling the list the drop-down fields from webdynpro ABAP, but, i am filling list for only 80% of the drop-down fields, rest 20 % is not filling at all (bcz, business want to have those 20% dropd-owns on the form by thinking going further they require, this moment they dont need so they dont want to fill the lists)
    Now the form is launching on the browser, fine. But when user submits it i am getting the below erro:
    The Entered Value Is Not on the List of Valid Values.  (I am guessing this error is talking about the DROPDOWN fields only)
    I hv tonns of drop-down fields, so, its very difficult for me to go and trace each and every drop-down fielld!! But, i checked all the populated/entered values in the drop-down fields, they are all fine. Sone dropd-down fields are GREYED OUT, they are defaulted from webdynpro ABAP
    Pls. let me know How can know which field/drop-down is causing this issue? Wht are the possible causes for this error? Error is not telling which fields is making issue?
    How can i trace and how can i fix it, pls. let me know
    Thank you

    Thank you for your tips.
    But, as of my knowledge every thing (case sensitive, list box entries) are fine, not sure, why am getting this error! I will double chk again.
    But, thing is.... actually, i have 4 pages, depending on the logged in user, i will HIDE the pages (say, for me the 3 rd page will be hidden), i am hiding the pages by using JavaScript in the form.
    So, this error is not coming if i execute/launch all the 4 pages, but, its coming if i hide any page for any user!!
    By chance, do we debug to figure out which FIELD is CAUSING issue/this error?
    From where this message is coming, i mean, from the SAP's JAVA stack? Wht is the message ID and #?
    or is it Adobe's/Form's error?
    Thank you

  • Metadata issues in A3 - This is a real concern

    Metadata issues in A3. This is a real concern if your images go to third parties from A3.
    http://www.controlledvocabulary.com/imagedatabases/aperture3.html

    Thanks, dzedward,
    I posted a reply with quite some effort in it, but it is
    dissapeared after pressing the reply button. what I as explaining
    was that I use an attached sound and so streaming is not an issue.
    Please look at the few lines of code I use in my demo (please use
    the link above for the fla with the WAV):
    audioClock=new Sound(createEmptyMovieClip("sound1",1));
    audioClock.attachSound("theSync");
    audioClock.setVolume(90);
    stop();
    //When playing a swf (in most cases) the audio clock is on
    every 46.4399093 ms.
    //A onSoundComplete function only starts ON a clock puls!
    That explains "gaps"
    //when people complain working with audio loops in Flash.
    //The audio sample used in this test has a 200 ms duration.
    It can't be shorter.
    //So it is started 25 ms from the end. When the sample is at
    the end, the flash player
    //pauses for 46.4399093 minus 25 ms, and starts the audio
    sample from the same point
    //again ( that is at the next clock puls). That's fine for
    hearing audio clock and
    //this test:
    audioClock.start(0.175,1);
    audioClock.onSoundComplete = function() {
    audioClock.start(0.175,1);

  • CS 5.5 coexist with CS 6.0 causes FrameMaker issue - can't import SVG file!

    Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
    Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
    Thanks in advance for your help!

    Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
    Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
    Thanks in advance for your help!

  • CS5 Bridge labels. Where are they recorded and stored?

    I am hoping to get some editing script developed that will make decisions based on labels in RAW files (.cr2). I am wondering where the bridge label data is stored? I understand they are not stored in xmp files and i cant see the .bridgelabels file anywhere. Any advice would be appreciated.

    Yes the information is stored in the xmp, and can be viewed via File Info :-

  • Two Fx 4 windows open at the same time causes usability issues

    When I load two instances of Firefox, I get multiple issues with the second instance usability, display, and hot keys.
    The issues are as follows:
    # Menubar/Toolbar appear differently
    # Back/Forward buttons do not work
    # F-Keys no longer Function
    # Favicons show old, cached icons
    Please see screen grab of my two monitors with two instances of Fx 4 open, but the I played with my toolbar settings to get it to look somewhat ok.
    http://www.travellingwebguy.com/images/Fx-4.png
    This is what happens when I open a second window, and do not mess with the toolbars:
    http://www.travellingwebguy.com/images/Fx-4-2nd-window.png
    This issue was not happening with Fx 3.x.x.
    I am using a custom Persona, but I have changed the Persona a few times and I still get the same result.
    I've removed all incompatible extensions and upgraded all the ones that needed upgrading.
    Not sure what the issue is here, but would love to troubleshoot it down if possible. Please let me know if any other info is required!
    Cheers
    Tim

    Exact same issue here. Also, the add-on manger will not launch.
    I thought it might be an add-on causing these issues, but only one out of my ten or so addons work in FF4, and I disabled it with no success.
    This is a huge issue for me. I attempted to uninstall FF4 and go back to FF3 but I can't find an install file for FF3.

  • 4.2.1 Does Not Fix" Crash-on-screen saver" bug or metadata issues

    ATV2 crashes as soon as it goes to screen saver. 4.2.1 does not fix this. WTC?
    You have to set screen saver to "Never" to prevent crashing.
    No one checks these things?
    Message was edited by: Mike Kwiatkowski

    Mike Kwiatkowski wrote:
    ATV2 crashes as soon as it goes to screen saver. 4.2.1 does not fix this. WTC?
    Metadata issues still hosed.
    Not seen the screensaver issue.
    Personally I think this update was a patch to fix the DVI flickering issues that rendered the device unusable for many people - other annoyances can be fixed later but we better keep reminding them:
    http://www.apple.com/feedback/appletv.html

  • XFi-2- Latest firmware (1.20.08) has caused some issues on 32GB model...

    HXFi-2- Latest firmware (.20.08) has caused some issues on 32GB model... When I started my PC last night, it notified me that new firmware was avaliable so it downloaded it and installed it on my Xfi-2 32GB
    According to the release notes, it was to add support for the 64 GB model as well as some general improvements.
    I can't determine what the latest improvements were (anyone have any clues ) and the UI seems the same.....the only things that have changed are that my applications no longer work (when I go into the applications shortcut, it says there is no valid content: I haven't touched these folders etc and they are still populated with the three standard apps as far as I can tell)
    The other thing (which may not be related to the firmware upgrade) is that my photos shortcut now pulls up some of my music folders that contain album art. Is this a feature or a bug (I don't want it to happen, I just want it to show photos within the 'photos' folder on the device).... I think it may have been caused by me simply dragging and dropping music folders onto the device using windows explorer rather than going through Centrale (slow!)
    Cheers

    Hi Timmo.
    What release notes are you reading? I have seen no reference to improvements other than adding support for the new 64 GB model on this firmware version. From the description of the problems you have, it seems that your player has some sort of file system corruption on the internal flash. I would suggest reinstalling the firmware on your device after formatting it (formatting the device only should be enough, I think).
    The size of the new firmware release, double than the size on the previous one, means that it probably has new features and applications that will be enabled on the future; however I doubt it means it has new features right now and hope it does not means we have two firmwares (on for the 64 GB model and other for the previous ones) as the SRM/AlphaBIOS pair on the Digital Alpha systems (an ugly hack on these superb computers, in my humble opinion) -- by the way, the new firmware does not require more space on the internal flash (I have 5077 MB available on mine with all firmware releases).
    The behavior you describe about album art being shown on the photos shortcut happens with older firmware releases too; I prefer album art embedded on the audio files instead of being available as another file. I agree with you, only pictures under the photos directory should be shown as images.
    Cheers.

  • How do we change itune and icloud accounts?  My wife and I have seperate accounts but she cannot access hes, only mine.  This causes many issues like facetime, text etc. Do we have to reset her devices and start fresh?

    How do we change itune and icloud accounts?  My wife and I have separate accounts but she cannot access hes, only mine.  This causes many issues like face time, text etc. Do we have to reset her devices and start fresh?

    I think this may be the answer.
    http://support.apple.com/kb/HT5621

  • Ea6300 causing network issues when connecting to web browser on my Mac

    I have had my ea6300 for two months and its causing major issues when connecting to my web broweser before I throw it out the window can someone give me some help.

    Hi bigtimer30, what do you mean by “it’s causing major issues when connecting to my web browser”? Do you mean that the MAC computer is no longer able to access the internet? If yes, is it with both wired and wireless connections? Is this happening to all of your devices? Or just that specific MAC computer? If all the other devices are still able to connect except the MAC, I suggest that you do a power cycle on the computer (if you haven’t done it yet). And you’re having difficulties with the wireless part, try to hard wire the computer straight to your router, and check if you experience the same thing. If the wired connection is okay, you may try playing with the router’s wireless channel. Better if you could give more details for us to give you more suggestions. 

  • Metadata Issue iBooks

    We recently submitted an Algebra 1 iBook created with iBooks author.  Received the message that there was a metadata issue.  Was wondering if anyone knew:
    1. What is the metadata they are referring to
    2. How do you edit it
    3. Once fixed, do you have to completely resubmit and start over with the submission process, or can you edit what has already been submitted.
    Much thanks

    Meta data is the details you entered when you acted to submit your book using iTunes Producer.
    Check for red flags for that book in iTunes Producer....could be any number of things - we can't tell without more info
    Just edit the stuff for that book using iTP for whatever needs fixing and try again.

Maybe you are looking for