Bridge mode for airport extreme

Hi
My TimeCapsule is used as base station im my home network (linked via ethernet to my modem). How can set up my Airport Extreme in bridge mode in order to extend my wifi?
Thanks!

The easiest way is to do a factory reset of the airport extreme and then configure it using the airport utility as a bridge. if you tell me what device and version of the airport utility software you are using I can be more specific.

Similar Messages

Bridge mode for airport extreme or dsl modem? Recomendations?

I'm upgrading to a 'blisteringly fast' 12 Mbps with my local DSL ISP (no cable in my area), and I'm thinking of changing out my
My current, antiquated setup is with a Speedstream 5200 Modem/Router (8 Mbps max) with a Linksys E1200 802.11n router. We have an Apple TV with HDMI into a stout Panasonic plasma, 2 Macs, 3 iPads (2xgen4 + mini), 3 5C iPhones and an old Dell Winbox (XP vintage that I will toss out) that access this configuration in a good-sized house (2 stories, ~4000 sq.ft.).
The Linksys 'n' speed router is somewhat adequate, but we want to do movie/video/music streaming to the AppleTV and we want to buy a new Mac (probably a Mac-mini to replace the Winbox). I also want to future-proof this setup for a few years, given the pain it usually is to do a wholesale swap-out like what I'm contemplating. I want to swap-out this pairing with:
a DSL modem/router to either a Netgear DM111PSP-100NAS (ADSL2+) or an older, but robust Actiontec GT-701D (or the newer -NF).
an Airport Extreme (802.11ac) to manage my Apple menagerie for fast streaming, and also to hang a poor man's network file storage off the USB port.
I'm asking for some recommendations from the community at-large so I can minimize the hassles when I do this swap-out. Which of the two devices (the modem/router or the AE router) should I put in bridge mode? Any performance penalties one way or another, or hidden gotchas?
Thanks in advance.
Craig

I'm back and wanted to put a coda on this thread.
First of all, many thanks to the recommendations by Tesserax and LaPastenague. You helped allay my fears in converting over to the Time Capsule environment.
The home network is working just great. Internal speed-ups all the way around. TC is working great as both a file server AND a Time Machine site. The Netgear DSL modem is the firewall and the DHCP server for my network. As stated in earlier posts, it has superior firewall capabilities compared to the Time Capsule. I configured the Time Capsule to Bridge Mode with my iPhone 5C, the configuration of which only took a couple of minutes. The speed between the 802.11 ac devices, my TC and the new Mac Mini, are unbelievably fast--on the order of 150+ Mbps at a distance of 40 feet or so through several walls--beamforming really does appear to work as advertised. That doesn't matter overall except for the Time Machine aspects, as my DSL line is a blisteringly fast 12 Mbps.
The only glitch I've had over the last 3 weeks was due to a short power outage, and the main problem was the networking with hard ethernet connection to the Time Capsule. I had to reboot the Netgear modem, as it was in a funky state, while other devices, such as my new Mac Mini, were waiting for the modem to vend a DHCP address. It turns out that the Apple TV had some persistence with its old DHCP-vended address, and the Mac Mini somehow received its IP address first--which conflicted with the Apple TV. Now, I'm not sure why the wirelessly networked Mac Mini beat the Apple TV to receiving a DHCP vending first, but it did, and the address persistence of the Apple TV created a conflict on the Apple TV network connection. Once I realized the problem, I shut down the Mac Mini and made sure all my other devices were off as well. I then restarted the entire network, the Apple TV received its IP address first, and all was well again. Granted, I could have disconnected the ethernet and allowed really fast wireless to the Apple TV, but it's only 4 feet away from the Time Capsule, so I might as well have the fastest pipe available for HD streaming to my large-format HD television.
The switchover was absolutely painless. Both the modem and the Time Capsule took, all total, about 10 minutes to set up and configure. Much easier than with Winboxes. Other than the Apple TV IP conflict after the power outage, it's been a real delight.
I'm very happy I switched to this new network configuration.

Guest Mode for Airport Extreme Edimax 3G 6200L

Hello everybody,
I've been dealing with this issue for some time now, and I can't seem to be able to sort it out, so I need your help.
I live in a place where we have lots of guests, so I need to share with them my internet connection. I don't want them to have access to my network, so I would like to create a Guest network.
My hardware is: a 3G Airtel dongle, an Edimax 3G 6200L router and an Apple Airport Extreme 5th generation. The internet comes throught he dongle, I live in Africa and there is no other connection available right now. The dongle is connected to Edimax router, because Airport Extreme doesn't support usb connections.
Then, the Edimax router is set to send internet via ethernet only (wifi is turned off to avoid interference). It is connected (via Ethernet) to the Airport Extreme, which is set to Bridge Mode. Airport Extreme creates and send wifi signal.
The problem is that I cannot set the Guest Network on the Airport Extreme. I know I have to change the Bridge Mode to DHCP or DHCP and NAT, but then the internet doesn't work at all and Airport Utility complains about double NAT.
Can anyone please help me with the configuration? Is there something I must do on the Airport Extreme settings page? Is there something I need to change in Edimax settings page?
Thank you in advance!

This is going to be difficult.
I think you will have to just test a couple of scenarios.. and you should start by saving the current configuration on both the edimax and the Apple Extreme. Just so you can easily revert if you need to.
1. Do a test of the actual IP being delivered to your system.
Check the edimax and find the WAN IP .. this is important as many ISP do not give public IP on wireless anyway. If this is the case you are probably wasting your time.. I would simply turn the wireless back on on the edimax and set it to isolation (if possible.. it is not in the manual for the 6200nl I downloaded).. you can set the wireless channel to say 1 and use the AE at 11 but leaving it at auto is usually fine. Use the wireless on the edimax as your guest wireless.. but to properly protect your computer files you may still need to set it to NAT.. and ignore the double NAT.
2. Put the AE in the DMZ of the Edimax and ignore the double NAT.. this is better than the above.
3. Turn off the NAT in the edimax
There is no bridge mode mentioned in the manual for the Edimax.. so the only suggestion I can give is to try turning off the NAT in the edimax.. and set the AE to use dhcp for internet and dhcp and NAT for network.. reboot both edimax and AE and see what happens. The IP on the WAN must be different subnet to the IP on the LAN so if both end up 10.x.x x addresses you will need to move the LAN IP of the AE to some other range. .you do this via the dhcp setup .. which is very odd.

Bridge mode for Airport Express or DSL modem?

I bought a new DSL modem (Netgear Broadband ADSL modem DM111PSP) to replace my old Westell. I also bought the new Aiport Express station (2012 model) to create the WiFI network at home. At the moment, the AE is in Bridge mode so that the DSL modem is on PPPoE to be the one assigning IP's for 3 portable Macs (2 on Wifi and 1 on Powerline->Ethernet). My ISP is AT&T.
I wonder if anyone can answer my following questions:
1) When Apple claims that the AE can support up to 50 concurrent users using the Internet, does that also apply to the AE in Bridge mode?
2) Can my ISP detect the fact that I have 3 computers with the current setup and start charging me more?
3) What will happen if I put the modem in Bridge mode and AE in PPPoE? Can my ISP still track the same info in (2)?
Thank you so much.
My computers (1 MacBook Pro and 2 MacBooks) are all on OS 10.6.8.
Gary

I thought AE cannot assign IP's once in Bridge mode.
That is correct. DHCP and NAT services are turned off when the AirPort Is configured in Bridge Mode.
If both modem and AE assign IP, would that create 'Double NAT' error?
Correct. Either the modem/router has to be in Bridge Mode and the AirPort handles DHCP and NAT.....or.....the modem/router handles DHCP and NAT and the AirPort is set up in Bridge Mode.
There are upsides and downsides to either approach. The simplest setup is to let the modem/router handle DHCP and NAT and configure the AirPort in Bridge Mode.
However, if you were planning to use the Guest Network feature of the new AirPort Express, then the modem/router must be configured in Bridge Mode and and the AirPort handles the DHCP and NAT.

Cannot access DSL modem in bridge mode w/ Airport Extreme

Hi
I have the following setup:
DSL Modem: Used in bridge mode + NAT/DHCP/Firewall turned off. Static IP is set to 192.168.2.1
Airport Extreme: In PPPOE mode with Shared IP (which is selected by default): Distributes IP range 192.168.1.X with subnet 255.255.255.0. At this point, Airport Extreme's IP address is what it gets from the ISP, basically DSL Modem is passing thru' this to the AE.
Ethernet cable is running from DSL modem to AE's WAN.
In this mode, everything works fine and me and all others can use Internet fine...
But the problem is that I can't ping/ access DSL modem at all in this mode. Basically, I need to login to the DSL modem to monitor my DSL connection quality (SNR, Attenuation, etc.) but whatever I tried I could not figure out how.
Basically, I tried setting a static IP on the DSL modem as 192.168.1.3, this did not work. I read somewhere that it needs to be on a different subnet, so tried using 192.168.2.1, that did not work either.
If I connect the DSL modem to a machine directly and set that machine's IP to 192.168.2.10, it can connect to the DSL modem, but there is no way I could access this DSL modem from the setup I explained above.
I am simply out of solutions at this point and any idea would be appreciated.
Thanks a ton!

What you are asking about is generally possible but probably not with an Airport Extreme. As others have noted you SHOULD be able to access a DSL modem in bridge mode via it's "lan" IP address if you directly attach a cable to it and configure your computer with appropriate static IP settings (I'm assuming that in bridge mode the DSL modem has it's DHCP server disabled).
This approach can also be achieve through a router with sufficiently flexible configuration options (e.g. openwrt open-source firmware). Basically the router attaches its WAN port to the modem like usual. Then the router is configured to do PPPOE via the WAN port while SIMULTANEOUSLY assigning the WAN port a static IP address that can connect to the modem's LAN address. Finally the router firewall must be configured to pass traffic from the DSL modem LAN IP back to the network.
So your intuition suggesting that this should be possible is absolutely right. However; you can probably also see from the steps required why most modems simply (incorrectly) document that it isn't possible.
Here's a link with some gory details on achieving this with an openwrt-based router: https://forum.openwrt.org/viewtopic.php?id=10952

I have two airport extremes, one acting as amodem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.

Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg.

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How do I set up Full Bridge Mode for port fowarding?

How do i go about setting up Full bridge mode, for port forwarding on my Airport extreme's ? I Have two working to get coverage in my house, but I guess they need to be bridged together

For most routers, including the AirPorts, bridge mode disables both the NAT & DHCP services. Since NAT is disabled, all of the firewall ports on the AirPort are open and thus port mapping/forwarding would not be reqiured. Therefore if you configure your AirPort as a bridge, the port mapping optios will not be available.
Since you have two AirPort routers, you would only need to configure the AirPort that is NOT in bridge mode for port mapping to allow communicaton coming in from the Internet. This would typically be the AirPort attached directly to the Internet.

Can hotspot of iphone work in bridge mode of airport express ?

I wanna share internet from iphone.
the hotsopt of iphone->bridge mode of airport express->ronter->nas,pc,ipad...etc
how to setup this net in my house?
THX

Yes, the Express will work as wireless bridge.. join a wireless network. It then plugs by ethernet into the router. But the router should be working in bridge also so it is really just a WAP. Then you plug in your NAS PC iPAD etc.. that is if the iphone is going to have the ability to handle dhcp from all those devices.. otherwise you have to use the router in NAT mode, which will cause double NAT issues.
BTW this is all wrong.. buy a 3G/4G wireless router. It is far superior setup. And since you will simply be chewing your data allocation it is better to buy the device for the job instead of creating a hydra.

Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
(108187)

Where do I download drivers for airport extreme.....my iPad can not be set up by he current software

where do I download drivers for airport extreme.....my iPad can not be set up by he current software

I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
Like james said, maybe more detail would help someone help you.

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX? The installation CD simply says that the software can't be installed while running this OSX.

Mountain Lion already has the most recent, updated version of AirPort Utility installed on your Mac. The version on your CD is out of date, so you can trash the CD.
Look in Macintosh HD > Applications > Utilities > AirPort Utility.

Extend Air Omni for Airport Extreme

I buyed from Apple Store Online the Extend Air Omni for Airport Extreme, but now my Airport Extreme don't have a antenna port.
It's possible ?

Only the M8799LL/A & M9397LL/A models of the AirPort Extreme Base Stations (AEBS) provide an external antenna port which you can plug the ExtendAIR Omni.

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

50 users per device, assuming that the "main" router is setup to deliver an adequate number of network IP addresses for all devices.
2 AEBS = 100 users, but that is really more of a theoretical max.
If you really need 100 connections, it would be much better to use 3 AEBS to spread things out.

Any idea on an update on 7.5.2 for airport extreme

Does anyone know if there will be an update to 7.5.2 for airport extreme?

The latest firmware for the Extreme is 7.5.2

Bridge mode for airport extreme

Similar Messages

Maybe you are looking for