BRIDGE NOT RECOGNIZED???

HI, WHY IS BRIDGE NOT RECOGNIZED??? AFTER INSTALLATION OF CS6 3 WEEKS AGO, BRIDGE WAS WORKING FINE

Run the Creative Suite Cleaner Tool, reinstall.
Mylenium

Similar Messages

Opening RAW files in Bridge - not recognized as "Camera RAW files"

I would appreciate any help with this as I am frustrated after spending hours trying to figure this out:
I use a Mac OS X laptop
I have a Panasonic (DMC FZ8) camera that I've been taking RAW pictures with. I plug my camera into my computer and try and open the RAW files directly from the camera using Bridge (I have Photoshop CS2)..I have also tried copying the files to a folder on my desktop and opening from there. The problem is that Bridge doesn't recognize my .RAW files as actual "Camera RAW" files and the icons remain as the Preview icon and not actually a preview of the image. If I click on it to open it in Photoshop the "Photoshop RAW Options" come up set on 8 bits and when I open it, it's just a gray screen. I have checked the settings for RAW Camera and the Panasonic RAW files .raw is selected. I have also tried selecting "show only camera raw files" in my window that is open and my .RAW files that are there gray out - so the program isn't recognizing them.
I just downloaded the Plug-in 3.7 Camera Raw and had to create folders for it in Application Support/Adobe/Plug-Ins/CS2/File Formats. the only folder I had was Application Support/Adobe so the rest I created.
I'm now lost as to what I should do next. Nothing I try seems to be working.
PLEASE HELP!

>I plug my camera into my computer and try and open the RAW files directly from the camera
Ouch! Ouch! Ouch!
That is a monumentally bad idea. Transfer the closed files to your local hard drive first.
This excerpt is from a long-gone post by the late, lamented author Bruce Fraser:
Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21)
Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader.
         Drains the camera battery
         Runs the risk of the software you're using to open the images writing to the card and destroying the format
         Runs a small but significant risk of USB power frying the camera
         Slowest method known to mankind of getting images off a CF or SD card

Bridge not recognizing internal camera memory

I've just transitioned my workflow back to a Mac environment (10.9.5) and have begun relying on Bridge CS6 to import my Canon Vixia HF20 AVCHD files directly from the camera. It works beautifully with anything saved to the SD card. However, Bridge won't recognize the camera's 32 GB internal memory. iMovie does, but I'd prefer to keep the video files in their native format. (I don't have Premiere.)
Any guesses as to the problem and if it's surmountable? I've really enjoyed the Bridge interface. (Much better than the Windows software Canon ships.) But those 32 GB contain my kids' toddlerhood, so I'd really like to back them up!! Thank you for your insight.
cheers,
Kristi

kjones8739 wrote:
I'm not sure if Bridge is using a Photoshop script. In Bridge, I choose File>Get photos from camera. I then use the Advanced Rename options to save the files according to date and time. Bridge will recognize an SD card if placed in the camera but will not recognize the internal camera drive (even absent a card).
Bridge imports the entire original file structure, which is partly why I like using it. But my searches show I'm probably an anomaly, as no one else seems to be running into this problem. (And Canon has a whole line of prosumer HD recorders with internal memory. They just ship with the world's most awful Windows software.)
That is exactly how you call the Photo Downloader script. :-/
sigh…
Bridge imports NOTHING. Its just a file browser, nothing more, nothing less. It's nothing more than the old Photoshop File Browser, renamed to accommodate the illusory, fabricated concept of the "suites". See below.
Photoshop opens nothing, edits nothing, saves nothing. Nothing is ever "imported" into Bridge.
Bridge just hands over the files to the appropriate application, whether that be Photoshop, ACR, Illustrator or even MS Word.
It does not keep its own libraries, it doesn't store images. It just shows you your files wherever you or other applications put them. That's why you think "imports the entire original file structure"; it's just showing you the original "structure", whatever you mean by that, pretty much as shown by Windows file Explorer or Apple's Finder.
It also can call on various scripts, such as the "Get Pictures From Camera" script.
Anyway, I come here to help users, not to debate uninformed posters.
I'm out of this thread, but not before saying that to me any and all Windows software is indeed "the world's most awful Windows software".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Inconsistency between or among applications in the artificial "suites" should come as no surprise.
The "suite" concept is a fabrication of Adobe marketing and bean-counting types. The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

PS/Bridge not recognizing raw files - HAVE updated DNG Converter & Camera RAW

Had to re-install my Adobe CS3 due to hard drive crash.
Now that I have re-installed, Photoshop & Bridge won’t recognize my raw files.
I HAVE updated my Adobe Camera Raw (3 times in the last hour), and my DNG Converter (4 times in the last hour). Nothing works. Any ideas?

If in photoshop cs3 you go to Photoshop>About Plug-in and click on the words Camera Raw, which version does it show?
Since photoshop cs3 can only use up to camera raw 4.6 and the EOS 5D Mark II requires at least camera raw 5.2, cs3 won't open those files directly without some help.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The 4.6 camera raw plugin update for photoshop cs3
Adobe - Photoshop : For Macintosh : Camera Raw 4.6 update
You could use the 8.7.1 dng converter to convert the files to dng copies which then bridge should see and photoshop cs3 should be able to open.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
Camera Raw: How to use Adobe DNG Converter - YouTube

Bridge not recognizing RAW files

How do get bridge in CS4 to recognize raw files from my Canon 5D Mk3?

If in photoshop cs3 you go to Photoshop>About Plug-in and click on the words Camera Raw, which version does it show?
Since photoshop cs3 can only use up to camera raw 4.6 and the EOS 5D Mark II requires at least camera raw 5.2, cs3 won't open those files directly without some help.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The 4.6 camera raw plugin update for photoshop cs3
Adobe - Photoshop : For Macintosh : Camera Raw 4.6 update
You could use the 8.7.1 dng converter to convert the files to dng copies which then bridge should see and photoshop cs3 should be able to open.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
Camera Raw: How to use Adobe DNG Converter - YouTube

I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

New Nikon Df camera RAW files not recognized in Bridge and Photoshop. Is there a fix? Surely Adobe make a mistake and not keep up with Nikon.

I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
Would post in ACR forum and see if they know anything more. http://forums.adobe.com/community/cameraraw

I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?

Ik kan in Bridge mijn foto's via photodownloader niet openen omdat RAW bestand van camera (Canon EOS 650D) niet ondersteund wordt, ook niet na updates?

Beste,
Ik heb Photoshop CS6, maar blijkbaar wordt mijn camera Canon EOS D650 niet ondersteund.
Mvg,
Op 14-jan-2015, om 21:39 heeft Ronald Keller het volgende geschreven:
I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?
created by Ronald Keller in Bridge General Discussion - View the full discussion
Welke versie van Photoshop heb je? Voor die camera heb je minstens CS6 nodig.
Camera Raw-compatible Adobe applications
Camera Raw plug-in | Supported cameras
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7096583#7096583 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7096583#7096583
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed. Anyone know the fix?

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

Why are my PXI cards not recognized by Windows or MAX?

I have a PXI-1045 chassis connected to a PC through MXI-4. When I turn the chassis and PC on with a PXI card in slot 2, the message "Windows could not load the installer for DAQDevice. Contact your hardware vendor for assistance." appears, and the PXI card is not recognized (it is scene by Windows as an unidentifiable PCI Devices, though I have a DAQmx installed).
More details:
Windows XP
LabVIEW 8.0 installed
TestStand 4.0 installed
Latest DAQmx 8.XX installed
NI Scope installed
NI CAN installed
MXI-4 PCI card installed in PC and recognized by Windows (as PCI-PCI bridge, and MXI-4 Device)
I identified PXI chassis 1045 in MAX and on subsequent boot up saw that MAX complained about pxisys or some other ini file (in the chassis status area of the screen) so I configured it as 'other' then put in the PXI-resorce CD and selected the ini file for PXI-1045, MAX no longer complains about pxisys and instead says the chassis is configured properly
If I have nothing but the PXI MXI-4 card installed in the PXI system and boot up the chassis then the PC, I get no errors
If I have a card in slot two (I've tried PXI-6509 Industrial Digital IO, PXI-2569 Relay Module, and PXI-5102 Digital Oscilliscope) and boot the chassis then PC, the message "Windows could not load the installer for DAQDevice. Contact your hardware vendor for assistance." shows up when Windows boots and Windows sees a PCI Device but can't identify any drivers for it.

Hello,
Can you post a screenshot of the problem? Are you switching on the chassis first or the PC? Please make sure that you switch ON chassis and then boot the PC. This typically happens when you have a corrupted installation. I would suggest downloading the latest version of driver from here and re-installing it.
Please uninstall all the driver software from computer before installing the new software.
http://digital.ni.com/softlib.nsf/websearch/d31d46fffb745eca862571490053eab8
Thanks,
Kalyan
Applications Engineer
National Instruments

My external hard drive is not recognized

I have the apple external disk drive. I have used it numerous times. I just plugged it in and the computer is not recognizing it. I have tried both USB ports. How can I fix this?

A: USB desktop or 2.5" port powered?
B: did you just install mavericks
C: DOES IT show in disk utility?
Can you confirm it on another Mac?
Apple doesnt make HD, what HD is it marked as?
Likely its a dead SATA bridge card, a very very common problem with USB and external HD
see here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
report back with more info

Flat file message is not recognized.

I have been pulling my hair out for days now. I have an ANSI x12 214 v4010 document that validates against the xsd file in visual studio when I remove the Interchange headers
I add the interchange headers back and deploy for it to pick up the file and I get the error:
The flat file message is not recognized. Unrecognized messages are not allowed as per the specified configuration.
This is the extent of the error information that Biztalk will respond with. I have to assume the issue is with the interchange headers since I know the transaction portion of the document itself validates. Below is a copy of my headers.
ISA*00* *00* *ZZ*SEND *ZZ*RECV *040805*0416*U*00401*000000001*0*T*^~GS*QM*SEND*RECV*20040805*0416*000000001*X*004010~[214 Transaction]~GE*1*000000001~IEA*1*000000001~
I am beginning to believe the problem may be due to the trading partner agreement. I originally didn't have an agreement at all and was just publishing my service. I have now added two partners for the send and the receive. I also created
an agreement with the Hosted Partner qualifier matching the sender info in the header and the Guest Partner being the receiver info. I set the version and type to match, added the sender application qualifier (GS02) which matches the sender info (ISA06)
and set the schema to the one I validate locally X12_00401_214.
Despite having the agreement in place that matches the headers I still receiving a flat file message not recognized error with no additional error information.
Please rescue me from the insanity...

Hi,
We need a few more details about his scenario.
have you uploaded this particular schema to the service?
What kind of bridge are you using – EDI / AS2 / XML
What tool are you using to push the message to BizTalk service? If you are using EDI / As2 bridge, are you adding proper HTTP headers while sending message from the client?
You may go through the blog
Test the Bridges - Post messages – 3 easy tools for the developers
http://blogs.msdn.com/b/mabs/archive/2014/10/14/test-the-bridges-post-messages-3-easy-tools-for-the-developers.aspx
Check the section
Considerations for the EDI / AS2 Bridges
Hope this helps you
Girish Prajwal

Lightroom 4.4 not recognizing RAW files from supported cameras

I started to get problems with Lightroom not recognizing RAW files from my Fuji XE-1 and Canon 5D Mark 3 cameras but I thought it was a problem with RC. After downloading some files today in 4.4 without a problem I encountered the same error message (unable to inport listed RAW files) again. The files open fine in Bridge. Any idea what is causing this problem?

Hi Geoff
I use a Mac with the latest version of Mountain Lion OS. The image files are being imported from the cards; in the case of the Fuji an SD card inserted in the card reader slot on the Mac and in the case of the Canon a CF flash card in a card reader attached to the Mac.
Appreciate any help you can provide.

ES1946 (Solo) Audio controller not recognized

Dear all,
ES1946 (Solo) Audio controller is not recognized on my box. I examined dmesg, it said:
es1938: OPL3 not detected at 0x1090
I've listed my dmesg and rc.conf below. Could anyone kindly look into it, and give me a hint to solve this problem?
Best regards,
Wen
dmesg
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
Entering add_active_range(0, 0, 49136) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 49136
HighMem 49136 -> 49136
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 49136
On node 0 totalpages: 49136
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 352 pages used for memmap
Normal zone: 44688 pages, LIFO batch:7
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6B60, 0014 (r0 PTLTD )
ACPI: RSDT 0BFFD520, 002C (r1 PTLTD RSDT 0 LTP 0)
ACPI: FACP 0BFFFB65, 0074 (r1 IBM TP240 2 PTL F4240)
ACPI: DSDT 0BFFD54C, 2619 (r1 PTL BX-TJ 0 MSFT 100000B)
ACPI: FACS 0BFFFFC0, 0040
ACPI: BOOT 0BFFFBD9, 0027 (r1 PTLTD $SBFTBL$ 0 LTP 1)
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48752
Kernel command line: root=/dev/sda8 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0118d000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 365.025 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189624k/196544k available (2120k kernel code, 6384k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
lowmem : 0xc0000000 - 0xcbff0000 ( 191 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 731.57 BogoMIPS (lpj=1218523)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0a20)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (731.57 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9e5, last bus=0
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 2180-218f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres I PIO at 0398-0399
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: can't evaluate _PRS: 12321<6>pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
system 00:05: iomem range 0xe0000-0xfffff could not be reserved
system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x8000-0x803f has been reserved
system 00:06: ioport range 0x2180-0x218f has been reserved
system 00:06: ioport range 0x398-0x399 has been reserved
PCI: Bus 1, cardbus bridge: 0000:00:0a.0
IO window: 0x00001800-0x000018ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x10000000-0x13ffffff
MEM window: 0x14000000-0x17ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 540k freed
Simple Boot Flag at 0x40 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 371
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:09.0: Boot video device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:08: activated
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
No dock devices found.
input: AT Translated Set 2 keyboard as /class/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1040 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1048 irq 15
ata1.00: ATA-5: HITACHI_DK23CA-10, 00H5A0G1, max UDMA/100
ata1.00: 19640880 sectors, multi 16: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-1 00H5 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
es1938: OPL3 not detected at 0x1090
gameport: ES1938 is pci0000:00:0b.0/gameport0, io 0x10a0, speed 1084kHz
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SBTN]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FAN] to D3
ACPI: PNP0C0B:00 is registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (64 C)
Marking TSC unstable due to: TSC halts in idle.
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /class/input/input5
Yenta: CardBus bridge found at 0000:00:0a.0 [1014:019a]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1272, devctl 0x64
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000010
pccard: PCMCIA card inserted into slot 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PPP generic driver version 2.4.2
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
input: ImPS/2 Generic Wheel Mouse as /class/input/input6
NET: Registered protocol family 23
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001060
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
lp: driver loaded but no devices found
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:26:5c:d8:21
nsc-ircc 00:09: can't evaluate _CRS: 12321
nsc-ircc 00:09: activation failed
nsc-ircc: probe of 00:09 failed with error -5
nsc-ircc, Found chip at base=0x398
nsc-ircc, Wrong chip version ff
ppdev: user-space parallel port driver
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
Clocksource tsc unstable (delta = -77266143 ns)
Adding 200772k swap on /dev/sda7. Priority:-1 extents:1 across:200772k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
tun0: Disabled Privacy Extensions
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access USB DISK 28X PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="yes"
TIMEZONE="Asia/Saigon"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(8390 pcnet_cs slhc pcnet_cs snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-hwdep snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-mpu401-uart snd-opl3-lib snd-es1938 soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="fang.ntu.edu.vn"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)

hi!
did you read this?
http://tascam.com/i-414-232-128-0-4A15AD91.pdf
can be found here: http://tascam.com/products/fireone;9,14,104,19.html
regards,
m.

Canon 7D MRaw files not recognized by PS Elements 8 on Mac OS X

Canon 7D MRaw files are not recognized by PS Elements 8 on Mac OS X.
After I installed CR 5.6 I can see MRaw files in Bridge CS4, but the files still do not open in PS element 8
Can anything be done to fix this?

Hi again,
I found "Library\Application Support\Adobe\plugins\CS3 (or
CS4)\Fileformats". As it happens, the camera raw.plugin 5.6 was already
installed for CS4 but not for CS3, which I therefore proceeded to do. When I
tried to open a Canon 7D MRaw file in CS 4, PSE opened with the same error
message as before, i.e the file format was not recognized.
However, just for the fun of it I tired to open the same file from CS3 in
PSE 6 and it works! but with the warning that the ACR expires in Jan 2010, I
think
So, there is still something wrong with the CS4/PSE 8, but I think I like
PSE better so I am OK for now - although the irony is that the only reason I
bought PSE 8 was to be able to work on Canon 7D raw files.....
Thanks,
Niels R

BRIDGE NOT RECOGNIZED???

Similar Messages

Maybe you are looking for