Bridge not remembering metadata settings

I use CS6 and I'm finding that Bridge is not remembering the metadata properties I set in Preferences. Once I reboot my PC, it forgets them.
Any idea what might be causing this?

If you have start Bridge at launch enabled you closing proceedure should work.
Have you tried setting your panels where you want then saving this as a workspace?

Similar Messages

Premiere CS6 does not remember some settings when saving custom export presets.

When I save a custom export preset in the export window, some settings are not remembered, and I need to change them every time again and again! The settings so far I found to not be saved are:
Key frame every ... frames
Limit data rate to ...

Interesting...
When I create and save an a H.264 QT preset
using the Export Settings dialog from within Premiere,
it does not save the key frame interval or max bitrate.
However, when I create a H.264 QT preset from within
Media Encoder and save... the missing settings are saved
and can be recalled from within the Premiere Export Settings dialog.
EDIT:
Re-tested this a bit more, and now the kf interval & max bitrate are
being saved with the presets created in Premiere Export Settings dialog.
Odd... my first 2 tries didn't take?

Bridge not Remembering Last Position for Side Panels?

The side panels in Bridge CS6 will not stay to the last set position when I close? I have thought that this was a case of bridge not closing properly on Windows (7) shutdown. I then tried setting the side panels to where I would like them and went File > Exit to close bridge properly and when I launch it still does not have the correct position. Does it not remember this and how do I change this?
Here is a screenshot of what I am calling the side panels: http://screencast.com/t/QDZGNCPp (The red arrows are pointing to the side panels.)

If you have start Bridge at launch enabled you closing proceedure should work.
Have you tried setting your panels where you want then saving this as a workspace?

Upload to FTP Host... not remembering ftp settings

Upload to FTP Host works well, but the settings are not remembered for subsequent uploads. How can I save the FTP Upload settings in Muse 2.2 for re-use?

Sachin,
Thank you for your note. My installed version of Muse version 2.3 does not remember any of the FTP settings in the Upload to FTP host… dialog box. This behavior is contrary to your report that Muse remembers FTP credentials. From my repeated experiences this function has no retention of previous dialog entries.
How can I make the Upload to FTP Host… remember the FTP site login, password, etc.?

Save for Web does not remember quality settings

Hello,
I just about PSE8 today and Im on a mac with Leopard.
PSE does not remember the quality settings when "save for web".
The quality is 0 every time Im saving. Even if I change to 100 it does not remember it.
Can you help please? Im far from being an expert here.

function(){return A.apply(null,[this].concat($A(arguments)))}
However in my library-folder/preferences folder I found 5 folders or files which are connected to adobe.
"write and read" is activated on all and Im the main user on this mac.
There is even one file called "Adobe PSE für Web speichern 6.0 Vor" so pretty much like "save for web". On this one I can write and read as well.
On Windows, there is a preferences file that is stored in the proper location for such files:
C:\Users\Ellis\AppData\Roaming\Adobe\Save For Web PSE\4.0\Adobe Save For Web PSE 4.0 Prefs
PSE has no problem writing that file. This sounds similar to the file you found.
However, there is another file that Save For Web tries to write:
C:\Program Files\Adobe\Photoshop Elements 6.0\Settings\Recently Used Optimizations.irs
It is this file that is located improperly, in Program Files, which is supposed to be only for read-only executables (.exe), dynamic link libraries (.dll), and other read-only assets live. Programs normally don't have write permissions for these folders, so Save For Web fails to save its preferences. Perhaps there is something similar on the Mac. (I'm not an OS X expert, so I can't help with the Mac conventions of where things are kept.)

IMac not remembering printer settings

I have created a default profile for my printer and the iMac is not remembering it unless I select the 'Printer' button.
How can I get the iMac to remember the settings in the default profile with out the need to click on settings.

Hi,
Try changing the default print settings using the CUPS web interface:
Go to http://127.0.0.1:631/printers and click your printer name.
Click the Administration drop-down menu and select "Set Default Options".
Select the Duplex option and select the binding type you would like to use.
Click the "Set Default Options" button when you are done and provide your administrator user details when prompted.
Make sure to reboot the Mac and try printing from your browser again..
Best of luck
Shlomi

Safari do not remember my settings

I am using Safari 6.0.1 on OS X 10.8.2, Safari dose not remember:
my toolbar arrangement
other setting like the default search engine, homepage, etc....

Hope tip from this discussion thread helps.
https://discussions.apple.com/thread/3695817?start=0&tstart=0

Safari not remembering preference settings

safari not remembering preference settings

Triple-click the line below to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?

CS5 will not remember print settings

Have upgraded from cs3 and cannot get cs5 to remember my print settings. In cs3 when I open a file to print it, the print driver automatically uses all the settings specified the last time I printed and saved the file. In cs5 the driver uses the settings specified for the last file printed. Anyone know how I can fix this?

Gaarhhhh, of course it would be something so stupid and simple...something I'd never think of.
Yeah, by docking I meant maximizing, I've been doing too much programming lately...
And yeah, moving it to the other monitor and closing it without maximizing it worked, and what's more when I opened it the second time, I maximized it, then closed it, then opened it again and it opened, maximized, in the correct monitor.
Still, seems like it could be a bug to me, CS3 always used to remember what monitor I opened the program in, whether I closed it maximized or not.
Also, for completion's sake, I have an nVidia GeForce 8800 GTS with the most recent drivers (just installed them about 2 days ago.)
Now I need to figure out how to turn off that stupid pixelation when I zoom in really far on an image...that's annoying.

Yosemite will not remember display settings.

I set my display on my macbook pro 15" 2014 (Yosemite) to have external monitor and not mirror itself. Each time I shutdown and restart it goes right back to mirror mode, as well as my wallpaper is reset to default wallpaper. How do I fix this?
Thank you in advance.

This should sort it out for you, it worked perfectly for mr.
Re: Notifications preferences don't hold
Just reboot then make your new settings modifications, then restart to verify that it has worked. You may ask what to do with the folder you dragged to the desktop? Honestly I simply deleted it and things have never been better. Good luck.
Regards,
Aymen

Bridge not seeing metadata templates

Hello--what is the answer?

The location is correct. The template would be called "Me.xmp" in my case. So it must have the extension xmp.
In Bridge you go into the Metadata panel menu (upper right) and it should appear as a choice in the flyout menu.
"Me" replaces the metadata with my copyright info on a selected file or group of files. Your template titles should appear there.

Adobe Illustrator CS5 Not Remembering Last Settings & Crashing

Hello
I am using the latest version of illustrator CS5 on a MacBook Pro Intel Core Duo, the rest of my Master Collection work ok except illustrator
Firstly, when ever you quit illustrator it crashes and asks to send a crash report
Second, when you reopen and go to File > Open Recent, there are no previously worked on documents in the list
Thirdly, when i set up the units in inches for example then reopen it the next day, it goes back to milimeters??
Does anyone know how to amend this problem? Apart from that it seems to run fairly smooth
Thanks

To add to this in case your trash the settings folder and it still happens you have to right or control click on the settings folder in the preferences and go to Get Info and look for Ownership and permissions and you can change it there to read/write.
But when you do so click on the lock icon at the bottom of the Get Info window and then enter your username and password at the bottom of the Get Info there is a gear like icon with an arrow head facing down it will allow you to apply the change to all the contents in the settings folder to read/write.
To find the Settings folder
1. Quit Illustrator.
2.Go to User/username/Library/Preferences/ Adobe illustrator CS5 Settings and trash the settings folder, the whole folder not just the contents of the folder..
3. Start Illustrator. Illustrator creates a new preferences file.

Safari 5.0.5 OSX not remembering cookie settings after reboot

Hi everyone,
I'm having a very frustrating issue lately with Safari 5.0.5 on my MBP with OSX 10.6.7...
I want to have my cookie settings under Preferences -> Security -> Accept Cookies to permanently be "Only from sites I visit". When I started Safari, and set that setting, it will remember the setting for the entire machines' session. However, if I reboot, or shutdown/restart my Mac, it will revert to the Always setting.
I have tried trashing the Safari plist file under ~/Library/Preferences/, and trashing the associated caches.db file as well, hence resetting Safari, with no success.
Any advice on this would be greatly appreaciated!
Cheers

Hi Andy,
I just tried to temporarily remove Safari Cookies, and I'm sad to say the old issue re-occured as soon as the add-on gets uninstalled.
It seems also, that after launching Safari for the first time after a reboot and going into Safari Preferences fast enough before the add-on launches, the setting is still incorrect, but then gets modified by Safari Cookies.
I went and checked my Login Items, but there's nothing there that can affect Safari; the list hasn't changed in a long time. I don't have folders .../InputManagers or .../ScriptingAdditions under Home/Library.
Under .../LaunchAgents, I have the following:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.CSConfigDotMacCert-<blocked>-SharedServices.Agent.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.apple.FTMonitor.plist
com.apple.imagent.plist
com.apple.marcoagent.plist
com.google.GoogleContactSyncAgent.plist
com.google.keystone.agent.plist
`
The first three are related to my Adobe CS5 and Acrobat X Pro installations.
Now that I have the add-on which seems to keep things in check, this isn't as high a priority as it was, but I would definitely love to find out what's causing this so I can eventually nip it in the butt!
Cheers

Safari toolbar not remembering custom settings.

Anyone else seeing this bug?
Whenever I customize the Safari toolbar (mainly to remove the bookmark button from the address bar) Safari will reload the default toolbar (but with Evernote clipper and 1Password and Delicious buttons) after a quit and re-open.
It happens on both my iMac and Macbook.

Hi
A corrupt preference file seems to be at the root of the "disappearing icons". On both machines, via the Finder: Your User Account>Library>Preferences folder. Move the com.apple.safari.plist file to the trash, then restart Safari. This resets Safari preferences to default values. Restore any custom settings in either the Preference panel, Edit (spelling), or View Menu. Also, restore any custom icons.
Also, the reset adds Apple default bookmarks to your Bookmarks collection (command/option/B keys). Delete any you don't want.
Post back

Fx Print - not remembering settings though i saved them

Hello:
I am not sure why, but the Fx Print Dialog is not remembering my settings.
see screenshot:
I desire the settings:
> print selection only
> and I choose print to PDF
I am a bit bored of having to choose these 2 settings EVERY single time i print a page. I never print as in print out. Always to PDF.
I have made these 2 changes, clicked preset and said save. But still Fx does not register I have done this.
Maybe these 2 settings cannot be remembered.
So if anyone knows how i can have these 2 settings remembered, please lmk. All I want to do is click my print icon on my toolbar and these 2 settings be defaulted. I always select the content (e.g. without the headings etc..) then I click the print icon.
thankyou for your help in advance.

Try this from the Presets: select "Save Current Settings as Preset.." and select for this printer only.

Bridge not remembering metadata settings

Similar Messages

Maybe you are looking for