Bridge on Mac deleting/rejecting/filtering not working!?! HELP

Ok seems as if I am having a problem only windows users have run into in earlier versions of CS.  I was using CS5 on my PC and for many reasons I had to dump the dead weight of the PC world and move to a Mac... FINALLY! But that also ment purchasing a new CS5 for Mac.  I thought this would be flawless... CS5 to CS5. WRONG. I store my photos on a 2TB external, same one i used on my PC. Now, I can not do any sort of "editing" of image info like "delete, "reject", "star" or anyother rating within bridge. It does not work with key commandes or from the menu.  After researching this issue for two days it seems as if this issuse has been reserved for PC users and earlier versions being upgraded to newer ones.  This is not the case for me.  They said to "use as Administrator" I am the adminsitrator, and have made sure the permisissions have been set to read and write. That has not made a difference.  Others have said that there seems to be no solution. Things they have tried include:
~Uninstall/reinstall of CS
~administrator settings
~setting it to open automatically at start up
~deleting pictures and reloading them through the new software version (this also seems to be an issue reserved for photos that have already been uploaded, I do not know if this will change with new images loaded through the new version as I have not had a chance to try it, since I'm trying to resolve this first)
I need to have access to my previously loaded files and this is a huge hiccup!
PS I can open the files to Photoshop, and edit, and the changes seem to stick, its just any organization, deleting, staring etc actually in bridge DONT stick. another issue that the PC users seem to have is error messages and pop-up windows when tring to exicute these tasks. I have no error messages.
PLEASE HELP! thx

I am read only on both of my externals! when i tried to find a way to set permissions, it says that I should be able to find a "lock" once I have gone to "get info" there is no "lock" so that I may enter my password and change permissions.
First thing that comes to my mind is that you have used the same external disks as you did for Windows. And that you did not reformatted them for a Mac using MacOS Extended (Journaled) formatting.
Without knowing your situation I assume you have a back up disk with the same content as your problem disk. If not it might be wise to buy a new back Up disk. There is one thing sure about disks, they all have an end date, some sooner most later but they all die and often at a moment you did not expect it nor could use it...
Make sure you have a proper back up and the reformat the disk (or the new disk) using Mac Disk Utillity
Personally I always use the safety option to overwrite the disk once with Zeros but that takes a bit longer.
Give it a proper name and use the default format as mentioned above. Copy the content back to the new formatted disk and try again
If in doubt try another older disk or buy a cheap one for testing if this method is working for you.

Similar Messages

  • Delete operation is not working to delete selected row from ADF table

    Hi All,
    We are working on jdev 11.1.1.5.3. We have one ADF table as shown below. My requirement is to delete a selected row from table, but it is deleting the first row only.
    <af:table value="#{bindings.EventCalendarVO.collectionModel}" var="row"
    rows="#{bindings.EventCalendarVO.rangeSize}"
    emptyText="#{bindings.EventCalendarVO.viewable ? applcoreBundle.TABLE_EMPTY_TEXT_NO_ROWS_YET : applcoreBundle.TABLE_EMPTY_TEXT_ACCESS_DENIED}"
    fetchSize="#{bindings.EventCalendarVO.rangeSize}"
    rowBandingInterval="0"
    selectedRowKeys="#{bindings.EventCalendarVO.collectionModel.selectedRow}"
    selectionListener="#{bindings.EventCalendarVO.collectionModel.makeCurrent}"
    rowSelection="single" id="t2" partialTriggers="::ctb1 ::ctb3"
    >
    To perform delete operation i have one delete button.
    <af:commandToolbarButton
    text="Delete"
    disabled="#{!bindings.Delete.enabled}"
    id="ctb3" accessKey="d"
    actionListener="#{AddNewEventBean. *deleteCurrentRow* }"/>
    As normal delete operation is not working i am using programatic approach from bean method. This approach works with jdev 11.1.1.5.0 but fails on ver 11.1.1.5.3
    public void deleteCurrentRow (ActionEvent actionEvent) *{*               DCBindingContainer bindings =
    (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding dcItteratorBindings =
    bindings.findIteratorBinding("EventCalendarVOIterator");
    // Get an object representing the table and what may be selected within it
    ViewObject eventCalVO = dcItteratorBindings.getViewObject();
    // Remove selected row
    eventCalVO.removeCurrentRow();
    it is removing first row from table still. Main problem is not giving the selected row as current row. Any one point out where is the mistake?
    We have tried the below code as well in deleteCurrentRow() method
    RowKeySet rowKeySet = (RowKeySet)this.getT1().getSelectedRowKeys();
    CollectionModel cm = (CollectionModel)this.getT1().ggetValue();
    for (Object facesTreeRowKey : rowKeySet) {
    cm.setRowKey(facesTreeRowKey);
    JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();
    rowData.getRow().remove();
    The same behavior still.
    Thanks in advance.
    Rechin
    Edited by: 900997 on Mar 7, 2012 3:56 AM
    Edited by: 900997 on Mar 7, 2012 4:01 AM
    Edited by: 900997 on Mar 7, 2012 4:03 AM

    JDev 11.1.1.5.3 sounds like you are using oracle apps as this not a normal jdev version.
    as it works in 11.1.1.5.0 you probably hit a bug which you should file with support.oracle.com...
    Somehow you get the first row instead of the current row (i guess). You should debug your code and make sure you get the current selected row in your bean code and not the first row.
    This might be a problem with the bean scope too. Do you have the button (or table) inside a region? Wich scope does the bean have?
    Anyway you can try to remove the iterator row you get
    public void deleteCurrentRow (ActionEvent actionEvent) { DCBindingContainer bindings =
    (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding dcItteratorBindings =
    bindings.findIteratorBinding("EventCalendarVOIterator");
    dcItteratorBindings.removeCurrentRow();Timo

  • I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

    I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

    You need to install Office on the computer from the installer DVD or disc image you purchased.

  • My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

  • Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

    Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
    As a result I can't update iTunes, version 10.5.2  (This software requiers Mac OS X version 10.6.8 or later)
    Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
    so in a nutshell can't use iphone 4, because iTune is not updated and will not  update because Mac Book is not up to date and will not update either.
    Please help.
    Thank you
    bt465

    Welcome to Apple Support Communities
    Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

  • Dual Monitors on Mac Mini Late 2014 not working on Dell S2340Lc

    Hey guys,
    Got a mac mini and using it mainly for work. Working for an ISP and no one has used macs and I've opted to be the poor sucker that gets to deal with old people that don't know how to mac very goodly.
    I have two Dell S2340Lc monitors. I have one connected up via HDMI and that works perfectly fine. I turned off the mac, I plugged in Monitor 2 with a MiniDP/Thunderbolt to HDMI adapter, powered on the mac and whilst it was booting, it had the Apple logo and the loading bar on the Dell display plugged in to the thunderbolt to hdmi adapter and then once it loaded up the log in screen, it went to the HDMI display. I logged in and in the displays section, the monitor plugged in to the thunderbolt to hdmi adapter isn't being detected, however I can plug it in to a Samsung 55 Inch Smart TV and it works just fine. I can set up dual monitors between the TV and the monitor in HDMI, but the Dell S2340Lc will only work with a HDMI cable into the HDMI port on the mac mini and will not work through the thunderbolt to hdmi adapter. On the display it just says that there is no signal coming from the computer.
    Just wondering if any of you apple gurus had any ideas as to why this isn't working?
    Thanks!

    What if you switch monitors?
    What happens if yo only have the Thunderbolt>HDMI>Dell monitor connected?
    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Call Apple. You get 90 days or free telephone support
    Complimentary Support (USA)

  • Delete Statement is not working correctly

    Hello,
    The following delete statement is not working correctly.
    If I press delete it will delete everything in the category table
    I don't know whats wrong with it.
    ----delete row from category if there is not infrastructure to support------
    IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
    DELETE FROM DFCY_CATG
    WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
    FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
    WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
    AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
    end if;
    Thanks
    Mary

    Hi,
    IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
    DELETE FROM DFCY_CATG
    WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
    FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
    WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
    AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
    end if;So, if P12_DFCY_SEQNO4 does not exist, then I would expect all records to be deleted because the NOT EXISTS() function would just return TRUE for every record on the table. Somewhere in the statement, I would expect to see something that links between the table being deleted from and the NOT EXISTS() data or, perhaps, using the P12_DFCY_CATG_C value as a filter?
    Andy

  • Delete statement is not working.

    Hi,
    find the code. Here the delete statement is not working and i am getting sy-subrc = 4. although ,
    xe1edp10-idnkd = 34596 and dint_edidd -sdata = 34596.
    please help me ...
    loop at dekek_x.
    loop at dint_edidd where segnam = 'E1EDP10'.
    if dekek_x-stpin = 1 .
    CLEAR xe1edp10.
      MOVE dint_edidd-sdata TO xe1edp10.
    delete dint_edidd where sdata = xe1edp10-idnkd.
    endif.
    endloop.

    1st thing..
    i tried this :
    tables: edidd, e1edp10.
    edidd-sdata = '315934 EA 017'.
    WRITE edidd-sdata.
    move edidd-sdata to e1edp10.
    IF edidd-sdata = e1edp10-idnkd.
    WRITE: e1edp10-idnkd.
    else.
      WRITE: 'nothing'.
    ENDIF.
    output
    >315934 EA 017
    >315934 EA 017
    2nd thing,.
    your loop inside loop doesnt make any sense as they are not related any where.
    3rd thing:
    the fields are not type compatible.. this might be the reason for wrong delete statement..
    and 1 more clarification:
    TABLES: edidd, e1edp10.
    DATA :it TYPE TABLE OF edidd WITH HEADER LINE.
    edidd-sdata = '315934 EA 017'.
    WRITE edidd-sdata.
    APPEND edidd TO it.
    edidd-sdata = '315934 EA 018'.
    APPEND edidd TO it.
    LOOP AT it." where segnam = 'E1EDP10'.
      CLEAR e1edp10.
      MOVE it-sdata TO e1edp10.
      DELETE it WHERE sdata = e1edp10-idnkd.
    ENDLOOP.
    in this also delete is working perfectly fine... you run and check..

  • Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

    in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

    Kitty,
    Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
    If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
    then:
    As for your issue, make sure all applicable scripts are checked in Bridge preferences:

  • The speaker of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

    the speakers of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

    Hi talero,
    Contact AppleCare or bring it into an Apple Store or AASP.

  • RV220W - Content filtering not working (?)

    Hello, I bought a router model RV200W fw 1.0.1.0... nice toy.
    It all works very well with the exception of content filtering. The rule only works if connections are made with the HTTP protocol, but if the user connects with HTTPS, then the rule is not considered... (???)
    f.e.:
    http://facebook.com (content filtered)
    https://facebook.com (content NOT filtered)...
    What the hell ! where I'm wrong ?
    Does anyone is experiencing the same ?

    Yes, the correct title was "URL FILTERING NOT WORKING"...thanks abudef000
    I do not want be polemical, but I do not understand where I went wrong.
    Before I buy I looked @
    http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html
    Check it out.
    Could you assume that HTTPS URLs are not in the sentence "Static URL blocking, keyword blocking, approved URL" as stated in the product sheet ?

  • Delete command does not work

    delete command does not work.. it just freezes neither roll back happens.. please advice

    Always: If possible, give the exact command & output from your terminal, pefrerrable with copy & paste. We cannot see your screen and magically spot the problem.
    In general, you should also include your database version and OS, although I doubt that this is relevant in this particular case.
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store

    After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store. Kindly Help

    Also having that problem - I checked and I am connected to internet (can access other websites or other pages in Apple's website), can login from Snow Leopard (10.6.8) with Mac App Store there, but if I use the (external) drive with ML to start up, no go.
    I can get to the "Featured"/initial MAS page, and tried going to the login from there, but same problem as Mitoshacer.
    In my case, MacBook Pro (2.66GHz, 8GB RAM, 500GB external with ML - vs. 320GB internal drive with 10.6.8), March/April 2009 model. Have done searches for the problem online, but nothing shows up (except some for older OS X versions).

  • Brand new macbook --- DELETE KEY DOES NOT WORK --- how to fix?

    I have a brand new MacBook and the delete key does not work. Is there a way to fix this?

    You have 14 days to exchange it no questions asked.

  • HT3226 Delete key is not working on the keyboard. What should I do?

    The delete key is not working on the wireless keyboard. What should I do?

    If it ever worked before then do 2-3 SMC resets back to back. You can find instructions at https://discussions.apple.com/docs/DOC-3603

Maybe you are looking for