Bridge Only Displays Info About Embedded Profiles from Photoshop, not from Illustrator or InDesign

I've been advised to my problem in this part of the forum. So, Adobe Bridge people, please see this thread:
http://forums.adobe.com/message/3616660#3616660
Thanks!

Thanks for your help, I looked around and didn't find anything with that name. But I did find a seeting under preferences, a checkbox, that said "metadata" but that was already ticked.
I ticked the box from Supports XMP though, and did the show hidden files setting in Bridge, but nothing changed.
Files that bridge identifies as untagged still load their various embedded colour profiles in Illustrator etc. which is good. - The files behaving as they should is more imporant than Bridge's ability to display information about the files correctly. So I guess I just won't use Bridge, so I can't get annoyed by it! An interesting solution....!

Similar Messages

  • Content from my Apple TV only displays on about 50% of the screen on my 40" 1080p flatcreen.  How do I fill the screen with content?

    Content from Apple TV 2 only displays in about 50% of the screen on my 40" 1080p flatscreen.  How do I fill the screen with content?

    Check  TV remote for an aspect ratio control (occssionally zoom) and set to 16:9.

  • Hi, i have edited a clip in hd with final cut, now I need to export it in 2K format . anybody knows how i can do it in FCP?  in internet I found only few info about 2K format: no more than frame size.  nothing about codec or similar. thanks for any help.

    Hi, i have edited a clip in hd with final cut, now I need to export it in 2K format. anybody knows how i can do it in FCP?  in internet I found only few info about 2K format: no more than frame size.  nothing about codec or similar. thanks for any help.

    SoCal thanks for the attention,
    sorry for having wrote the question directly in the subject, but first i wrote it by text edit then copied it, but in the wrong place too.....
    coming to my question, timeline settings are:
    as it is a commercial promo that must be projected in a multiplex cinema, the 2K format is needed.
    I've heard about transcoding services, and they are very expensive. 
    so i'm looking if there is a way to do everything by fcp.
    the project will be delivered as SD DVD for archive pourposes and as a single file for the projection or eventually transconding.
    p.s.: sorry for my english, i'm from italy: had my last english lesson 35 years ago!

  • HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Use it the same way as previously.
    ctrl B shows the menus.
    ctrl S shows the sidebar.
    What else do you need help with?

  • How do I customize the CNN and Wall street journal apps on my iPhone 6 to only show news about business and technology, and not shootings or murders?

    How do I customize the CNN and Wall street journal apps on my iPhone 6 to only show news about business and technology, and not shootings or murders?

    First, we are not Apple, we are other users like you trying assist with hardware problems.  We cannot help with warranty issues.
    Unfortunately, Apple cannot and will not help you unless your iPhone is returned to the US (in person, not by international mail).  The warranty is not international.  This topic has been discussed on this forum since before the 5s was released.  Please tell all of your friends not to buy an iPhone in another country unless they are willing to forego warranty and service from Apple.

  • 2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

    2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

    Thanks, but I've checked those articles out already. I drained the battery and finally got the needs charge (battery w/red line + arrow pointing to a charging bolt), I plugged the USB into the laptop and held down the start key +home key until I saw the apple logo. However, it still was not recognized by itunes. It's been plugged in for over an hour now and the screen is cycling apple logo/low battery (battery w/red line)/and black screen.

  • I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud. help?

    I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud.
    Please assist
    Thx

    You don't really delete app that way, that way to stop backup for that app in icloud.
    You need to delete it from your home screen and then while it still will look like download from icloud - app will start fresh.
    However if app uses any account sign in the stuff that is attached to sign in will come back, so if you do not want to you need to use
    fresh account as well.

  • Satellite A105 boot up only from HDD not from Floppy or CD-ROM

    Even after C-MOS Set up, system is booting only from HDD not from Floppy or CD-ROM.
    Is there any sepcific setting to set these controls in Satellite A-105 Model ?

    Hi
    Do you mean an external floppy drive and external CD-ROM drive or a one which is built-in?
    If you want to boot from the internal CD-rom drive so you have 3 possibilities.
    1. Changing the booting order in the BIOS to CD drive
    2. pressing the C button immediately after notebook starting
    3. pressing the F12 button immediately after notebook starting and choosing the CD drive
    I think you should also be sure that you want to boot from the bootable CD.
    If the CD is not bootable you will be not able to boot from the drive.
    PS: If you want to boot from the floppy drive you can press instead of C button the U button

  • Preserving Transparency from Photoshop CS3 to Illustrator CS3

    Hello all,
    I'm trying to figure out how to preserve an image's transparency between Photoshop and Illustrator. Both apps are CS3.
    In the broader design context, I'm trying to move an isolated wine bottle from Photoshop into an Illustrator document. I'd like the neck of the bottle to overhang a series of dotted lines in the Illustrator document.
    Any help would be much appreciated.
    Thanks

    double-click the background layer, so that it becomes Layer 0, or whatever you want to name it. Background layers are not capable of transparency, so you have to make the layer into a non-background layer.
    A more flexible way to do this; instead of *deleting* the area you want to be transparent, while the selection is active, click the "make layer mask" button at the bottom of the layers panel. This is non-destructive to your original image, and can easily be edited or tweaked in the future.
    I highly recommend learning to use layer masks while you are learning to use layer transparency. I'll bet Doug would recommend this as well.

  • They took 19.99$ from my account but didn't give me the dimonds in Hay Day game then the game supports told me that the problem is from apple not from them

    They took 19.99$ from my account but didn't give me the dimonds in Hay Day game then the game supports told me that the problem is from apple not from them

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple. We won't know what terms that iTunes Support think that you violated, but the most common reason is probably trying to use another country's store - you are in the same country as you have listed on your iTunes account ?

  • Info about "Server profile" in Device manager

    I want to update my firmware via over the air to my mobile directly.
    I am using a N73 and N82.
    In device manager of N73, there is a default profile named Nokia.
    I can check for updates with it from my mobile directly.
    But N82 needs to define a server profile. Need ifro for that.
    Please help
    thanks

    T-Mobile  did the same on their custom firmware for N97  and now I find the same on N8
    no server  profile   in the end on my N97 i got so fed up i  changed the product code and got rid off all the T-Mobile nonsense blote-wear and it got me the Server profile.
    I Don't want to hack product code on my N8    in Nokia's online FAQ's is says how to set the server profile but it doesn't seem to work for N8.
    I wish Nokia would stop allowing networks to have custom versions. (let them brand by a theme only)
    Anyone know the Server Profile settings  for N8   ?

  • How to display a static Image in a region (Not From Database)

    Hi
    How can I display a company logo in a region? Not from any database.
    If we can display a static company logo in a region then where Do I have to place this Company Image (Which Directory or is there any location I have to place this company logo).
    Regards
    Kiran Akkiraju

    Scott
    Thanks for reply.
    I have gone through the link and as per the link
    navigate to the Application Builder for your application.
    click on the Shared Components icon
    click the Images icon
    click Create to upload a new image
    click Browse... to locate an image on your local filesystem
    make sure you remember the name of the image, for example: my_logo.gif
    When I click on Application Builder I am not able to see shared Components.
    I am able to see a Shared Components in a page definiton only.
    Could you please let me know where Can I find this Shared components option.
    Regards
    Kiran Akkiraju

  • How do I get the file nformation from photoshop to move over to InDesign and once info is there how to I get InDesign to create captions from it?

    I need to be able to create captions from the metadata  located in the file info on .png images created in Photoshop.  I have been running into multiple issues.
    1. The data from Photoshop is not showing up in the InDesign File Info
    2. When I simply recreate the information - it is very basic simply description and copyright - the active caption that is generated reads <no data from link>
    Obviously I'm missing an essential step by I cant figure out what.
    Help point me in the right direction would be most appreciated.

    I just tried that and still the same issue.  I right clicked the graphic, (first made sure that the metadata was  in the File Information window), then Captions > Captions Setup > OK.  The Metadata fields are Description and Copyright.  When I try to generate a Live Caption I get the <no data from link> message and for the Static Caption I get an empty container below the graphic

  • Chrome and Firefox only display phone version of Muse website and not the desktop content

    My website workeffects.com  was working properly a couple of weeks ago -  desktop, tablet and phone.  For some reason, now the desktop version only appears when it's viewed in Safari --- Chrome and Firefox only display the phone version of the site.
    Please help.  I have clients that need to see the desktop version.
    I have Creative Cloud and everything is up to date on the software.
    Wendi

    The desktop version of my site (workeffects.com) loads properly for Safari and Internet Explorer, but when the site is viewed in Firefox or Chrome it only shows the Phone version of the site.  Please make a recommendation on how to fix this issue.

  • Print materials from Photoshop instead of Illustrator

    Hi all,
    I occasionally have to print signage, and usually  "design in Photoshop> import graphics into Illustrator> replace text in Illustrator> save as PDF".
    I just designed a 300dpi effects heavy image, and am wondering about the ability to save from Photoshop without having to mess with Illustrator. I've seen mention of "exporting in vector format" and it is 300dpi.
    = Is my work-flow the most efficient way to do it?
    = Can I essentially save/export a PDF from Photoshop that will keep the text vector and print as it would if exported from Illustrator?
    Your advice and input is greatly appreciated.
    Thanks,
    Lands

    landsburger wrote:
    = Is my work-flow the most efficient way to do it?
    = Can I essentially save/export a PDF from Photoshop that will keep the text vector and print as it would if exported from Illustrator?
    For the first question I think it is not efficient. For efficiency I would either 1) Use only Illustrator or 2) Use only Photoshop or 3) Do your design in Illustrator and import into Photoshop. The last option probably depends on the subject matter of the document, but still the output options from Photoshop are preferred by some over Illustrator.
    Question 2: You can get high quality PDF output from Photoshop. Below is a small portion of a pdf file created by Photoshop and shown in Acrobat. It is being shown at 2400% magnification and shows 30 pt vector text and portions of two circles. The circle on the right is a simple pixel rendering and the circle on the left is a vector shape - the difference is evident.
    If you work in Photoshop alone I would suggest starting with two pieces of information to create your initial working document - the number of pixels per inch (not printer dots/inch) you think you need and the size of the desired printed document - multiply them. If you wanted 500 pixels/inch and a 6" x 4" print then set your photoshop document to 3000 x 2000 pixels (minimum). Also, use vector elements in your document wherever possible.
    Paulo

Maybe you are looking for