Bridge/Photoshop hiding buttons

I have CS4 on Vista and just got a new laptop which has Windows 7 and just got CS5. 7 is a little different than Vista, so bare with me here...
I shoot my images in RAW, so when I put them on here, they go into Bridge. Once downloaded, I can click on a picture I want to edit and it will open photoshop. My image will come up in a pop up box (in the photoshop program before opening it into a window to work in within Photoshop). The pop up box has my image on the left with slider bars on the right so I can adjust say the color, exposure, clarity, contrast and such and such. At the bottom of this pop up box is "save" on the left side, "Cancel", "Open", and I think an "Apply" button on the right. For some reason on my new laptop with Windows 7 these buttons are covered up by the bottom tool bar (Where the start button is.. that bar). I tried moving the box up, but it has no where to go,so it snaps back down to hid the buttons. It will not resize up/down only side/side. My old laptop with vista and CS4 never had this problem. I don't know what to do, does anyone else have this problem or know why it's not wanting to work properly?

Minimum display resolution for Camera Raw (which is a plug-in not Photoshop) is 1024 x 768. If the Task bar at the bottom is stealing pixels, your only choice is to set the task bar to auto hide so you can get to the buttons.

Similar Messages

  • Bridge/Photoshop Colour Issues

    Bridge/ Photoshop Colour Issues:
      It appears that there are a few pictures that are noticeably dull, when I load them in Bridge and Photoshop.   Those same pictures are very vibrant when I look at them directly from the SD card or load them into Picassa.  I tried editing the picture, saving it in Photoshop, then opening it up in Picassa and it has the same dullness.  Since having this issue, I have updated the drivers on my Quadro graphics card, but I think it may be something to do with the way that I set up Adobe Bridge, because this is the first time I have imported a large batch of photos from Bridge.  However, I pretty much left everything as the standard settings in Bridge.  Any suggestions?
      FYI - I just started using the Adobe Master Collection, with Win 7 Pro 64 and Huey Pro embedded on my laptop. My colour settings are Huey Pro on my laptop, SRGB in Photoshop and General Purpose for Bridge (I haven’t had this issue before and Huey Pro has been my colour settings on my laptop since I got Adobe).
    Derek

    Dwhug wrote:
    However, when I switch the Colour Settings>Working Spaces>RGB to "Monitor RGB - Huey Pro" the problem is fixed.
    That turns off color management in Photoshop, so yes, that would match other applications that aren't color managed at all. You're not fixing the problem, you're just hiding the symptom.
    If you're certain the Photoshop version is wrong, that means your monitor profile is corrupt. A corrupt monitor profile only affects color managed software like Photoshop. Other applications don't use the monitor profile and never touch it.
    If it's merely the fact that Photoshop is different, that's normal and all as it should be. With a valid monitor profile Photoshop is right and the others wrong.

  • I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

    I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

    Make sure you have the right version...
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • Migration of Adobe Bridge & Photoshop from imac to imac

    I need to migrate Adobe Bridge & Photoshop to a new imac, I need help & tips please

    Mellie28 wrote:
    I need to migrate Adobe Bridge & Photoshop to a new imac, I need help & tips please
    First and last:  Don't! 
    Always install from the original media (DVD or download from scratch.
    Migration or "transferring" will bring you nothing but grief.

  • Bridge photoshop batch problem

    Hi there,
    After upgrading to Photoshop CS4 from CS3 (new install), I am having a problem with running Photoshop batch from bridge.
    I have actions that work fine when run from Photoshop but fail when run from bridge.
    I don't seem to be able to run any Photoshop actions from bridge without a failure.
    The error messages include:
    "JavaScript code was missing"
    "The command 'Pixel Genius PhotoKit Capture Sharpener Expert' is not currently available"
    As well as other seemingly random "the command .... is not currently available".
    I am running Vista 64 bit.
    If anyone has any ideas - I would appreciate them.
    Thanks,
    Richard.

    Hi there again,
    An update to this problem.
    The problem appears to be with Bridge-Photoshop communication.
    I select images in bridge, choose Tools->Photoshop->Batch.  Photoshop opens and I select the Action to run and click OK.  At this point, if Photoshop had no image already loaded then the Action fails because there is no image, ie. the selected images from Bridge are not opened in Photoshop.  The error messages are consistent with having no image loaded to run the various action tasks on.
    If Photoshop already had an image loaded, then it proceeds to run the Action, once for the number of images I first selected in Bridge, but on the image that was already loaded - not on the images selected in Bridge.
    I have deinstalled and reinstalled Photoshop and all its updates with no change.  Any ideas at all would be appreciated.
    BTW Image Processor works ok when invoked from Bridge.
    Tks,
    Richard.

  • How does the image time stamp display /modification vary among Bridge, Photoshop, and PS Element Org

    I've noticed some discrepancies between times recorded in my image EXIF data as well as the time displayed with images in Bridge and Photoshop Elements Organizer.  For instance I may have a series of images shot within a few minutes of each other.  After having done some manipulation of a subset of the images and later on showing the sequence in both Bridge and PSE Organizer, I have noticed that the time associated with some of the images has changed.  Bridge and PSE Organizer may actually show times that differ by several hours.  It almost looks like the time is converted from the original camera time to UTC and then possibly back to the time zone where my computer is located.  The pattern is not completely consistent and may depend on what Adobe products have been used to adjust or catalog the images.  I'm looking for a good and complete description of how each product handles the image date and time stamp.  I suspect that there is some inconsistency in how this is done across the products.  I'm currently using Bridge / Photoshop CS6 Extended and Photoshop Elements Organizer 10.0 which were recently upgraded from CS 5 and 8.0 respectively.  I also use Adobe Camera Raw 7.1 to edit the Nikon raw files.  This problem appears to predate the upgrade of my products.

    Well, it must be a system-specific bug of some sort that's been introduced, because I was able to create a 4200 x 3500 image made by mapping an image of similar size to a cylinder, and the cylinder would move/rotate in real time.  Of course, I have a completely different video card and system than you do, but I'm just verifying that it's not broken everywhere.
    Rendering isn't hugely fast, but that's not unexpected with a larger image.
    Maybe being more specific would help.  Is your mesh complex?
    Is it something you'd be willing to share online or describe how to create?  I would be happy to try to match what you're doing more thoroughly to see whether I can reproduce the slowdowns.
    Beyond that, I'm not sure what to suggest...  You don't have a lot of RAM to be working on 15 megapixel images, but as you say the thing to concentrate on is that you're seeing quite different performance from the Ps CS6 beta version.
    -Noel

  • When i open a raw image in bridge, photoshop doesn't recognise the file

    when i open a raw photo in bridge, photoshop doesn't recognise the file

    Details and screen shots, please.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Buttons hiding buttons on indesign

    Hi hope you can help. I'm using indesign CS5 and have a problem with pop up buttons being hidden by other buttons. The page design is a 7 column grid with around 10 buttons underneath each column that act as hyperlinks and trigger other show/hide buttons that give a brief summary of the info at the destination of the hyperlink. So in total there is about 140 buttons - 70 shown all the time and 70 pop ups. To help me manage the design I set up the pop up buttons in 7 separate layers as they overlay the buttons in the 7 column grid. When I export to PDF the pop up buttons appear but are partially hidden by the other buttons. Strangely this is only happening for a proportion with some appearing as they should and in the button tool bar review option they all appear fine. It also worked fine on initial exports and the problem only started when I rearranged the tab order.
    Any any help would be much appreciated!
    James

    Hello,
    I do not think that the BASIS can help you in deleting/hiding buttons from the UI. Generally, the buttons are stored in the GT_BUTTON/GT_BUTTONS attribute of the overview view/viewset controller. In some cases it may be hard coded inside the htm page as well in the form of HTML tags.
    We'd definitely need to do some programming to achieve the functionality you are looking for, Also remember it is different for different views. You need to find out the view that has the buttons.
    Do a F2 on your UI screen to find out the details of the screen.
    Regards
    Prasenjit

  • Hiding buttons based up on business role; Is possible by the BASIS?

    Hi Experts,
    I have done one enhancement for hiding the buttons according to Business role using coding but it was not possible for all the desired buttons since I couldnu2019t find out relevant internal tables for the buttons.
    Now we are planning to do the same activity by the BASIS help.
    Are Hiding buttons based up on user or business role can be possible by the BASIS activity like authorization object to handle the drop downs based up on roles .
    If possible please suggest me the way out to resolve the issue using any kind of BASIS activity.
    Thanks
    Chand

    Hello,
    I do not think that the BASIS can help you in deleting/hiding buttons from the UI. Generally, the buttons are stored in the GT_BUTTON/GT_BUTTONS attribute of the overview view/viewset controller. In some cases it may be hard coded inside the htm page as well in the form of HTML tags.
    We'd definitely need to do some programming to achieve the functionality you are looking for, Also remember it is different for different views. You need to find out the view that has the buttons.
    Do a F2 on your UI screen to find out the details of the screen.
    Regards
    Prasenjit

  • Bridge & Photoshop CS5, opening Photoshop files from Bridge

    If I open Bridge in Photoshop CS5, & double click on a jpeg thumbnail in Bridge, it will not automatically open the file in Photoshop. Why?
    How can I change my settings so that the files selected in Bridge will automatically open in Photoshop when double clicked?

    Hi, when you go to Bridge/Preferences/file Type Associations, & you see the box with a list of file formats in bold on the left, you will see a program name or the word 'None' next to each one, & an arrow to click on, to the right of each one.
    If you have 'None' written there, it means it hasn't got a program allocated to it, or it may have some other program written there instead.
    What you need is to see Adobe Photoshop CS5 in the list on the right, next to every file format that you use.
    You could try clicking on the Reset to Default button at the bottom of the box to see if it brings up Adobe Photoshop CS5 automatically.
    If it doesn't, or brings up other programs instead, click on each of the arrows on the right inside the box, then hit 'Browse'', then look on your hard disk for the program file for CS5, & select the actual application set up file 'Set-up.exe''.
    That's what worked for me.
    Good luck!

  • Bridge's 'done' button won't work

    I have been trying to learn more skills, and then out of the blue, I cannot get my raw photos to open in Bridge when I click in blue 'done' button as they have always done in the past. They go  straight to Photoshop (CS5.) I have tried different combinations of keys, and I have tried to apply the suggestions in Martin Evening's CS5 book, but nothing helps, and now that I cannot proceed with my usual editing, I am quite frustrated.
    Sally

    Sally's Shadow wrote:
    and then out of the blue,
    Whenever Bridge starts behaving odd first thing to try is restart Bridge holding down option key and choose reset preferences. Try again, it solves usually 9 out of 10 problems :-)

  • Embedding fonts in Bridge (Photoshop CS5)

    Hi folks!
    I'm sorry for posting but I still have trouble with creating PDF via Bridge.
    I have sveral PSD-Files (CS5 made) using several image- and textlayers.
    Now I want to create multipage-PDF using Bridge that comes with PS CS5.
    Works fine so far but Bridge does not embed those fonts used in the PSD!
    Seems to me Bridge just merges all layers to one pixelbased image and saves it in PDF-format.
    But that's no good deal!
    In CS2 there was a much better solution in PS2 allowing to create multipaged PDF with embedded fonts.
    Is there any chance to embed fonts with Bridge?
    Plz don't tell me to use Acrobat or InDesign because I'm only using PS CS5.
    Thx!

    Which version of Camera Raw do you use (Photoshop > About Plug-In > Camera Raw) and which one is needed for that camera?
    Camera Raw plug-in | Supported cameras

  • Adobe Bridge - Photoshop Album

    Kann Adobe Bridge die Daten aus Photoshop Album importieren?
    Danke

    Bridge liest Original-Assets ein, also nicht Datenbanken anderer Programme. Wenn Sie den Ordner aufrufen, wo Ihre Bilder sind, dann zeigt Bridge alle Dateien darin an, nicht nur Bilddaten.

  • Lightroom 1.1 - Adobe Camera RAW 4.1 (Bridge, Photoshop CS3) problem

    Dear all,
    I am having some problems with the appearance of files developed in adobe lightroom 1.1 or in adobe camera raw 4.1 from e.g. bridge or photoshop cs3. When developing in lightroom the images look great, however when using acr 4.1 and the same xmp sidecar settings imported from lightroom, the image in acr looks very pale in comparison. For example when using the export into photoshop option in Lightroom, the image in PS3 looks very pale to the one in lightroom. The same problem persists with developing using ACR 4.1 from bridge. I have turned autotoning in ACR off. Also in the color management of PS CS3, the desaturate checkbox is UNchecked.
    I am using an icc profile for my 30" cinema display, calibrated with colory eyes pro and a spyder2.
    Has anybody had similar problems with ACR 4.1 or am I just doing something horribly simple wrong?
    Thanks for your help!
    Immanuel

    Thomas,
    thanks for your reply. In Mac OS X Preview the images look all good and very much like what I see in Lightroom. In any case not as pale or like with a slight white overcast to what I see when using ACR 4.1 from Bridge or Photoshop CS3. In PS color settings, preserving embedded profiles is checked. Yes, it seems to me as well that this is some color management issue. The 30" Cinema display was calibrated using Color Eyes Pro and Spyder2 to Gamma 2.2 and 6500 temp. However, even when reverting to the standard Apple color profile for the monitor, the problem persists.
    No luck so far...
    Immanuel

  • Indesign slow with Bridge -Photoshop-Illustrator

    Hello there,
    First, sorry for my english i'm French.
    One of my collegue is experiencing  issue with CS6 indesign.
    Installed in a PC with Intel core i7 370 2.93/2.93 gHZ, 16 GB RAM.
    Windows seven 64 bits.
    Once he open a files of more than 10 Mb in Indisign and open in the same times Bridge or photoshop to integrate pictures or illustrator the PC get really slow and the users must wait several minutes to get the work done.
    I never use myself The CS6 so I don't know if this behaviour is normal.
    Before that the user was using CS4 and he did not have so much trouble with the same kind of files and he was doing the same work on it.
    Beside the CS6, the unit has some standart software installed, Microsoft office 2003 and basically that's all except web navigator and some soft like cccleaner,VLC,Quicktime, nero burning room, kaspersky antivirus...
    He never get any error message, or blue screen or whatever...microsoft and adobe updates are done.
    All users in the services have the same hardware and software and this is the only one who had issue, the only difference is that he is working on bigger files.
    I have ask him to try to work on the PC of his colllegue to check if issue appears to but he willbe able to do the test tomorow PM only.
    When we have migrate from CS4 to CS6, I did not reinstall windows, just desinstalled CS4 and then install CS6.
    I didn't use the CS cleaner tool....
    Did someone knows where the issue can come from ? drive access or software related ?
    It's busy timing for now so I don't want to reinstall all the PC and CS6 before knowing it will solved the issue.
    Thx a lot,
    Elisa

    Is there any technical support when you buy CS6 ???
    I mean our compagny had Cs4 before and now -  like there is no upgrade anymore-  we bought 9 complete CS6 license ( including 2 master) and no help from adobe ?
    So basically:  adobe, it's we get your money we are happy if  you have issue,  we don't give a s**t !!!

Maybe you are looking for