Bridge Plug-in needed

Good Afternoon,
I need someone that can create a plug-in for Adobe Bridge.
We are in need of a plug-in that will enable photo printing along with the path designation printed on same page directly from Bridge.
Anyone that knows of such a thing or anyone willing to develop this for us please contact me directly.
Thank you,
Carrie Russell
AGCO Corporation
[email protected]

Hi Nathan Rousseau ,
If the target browser doesn't support Java 1.1.8 then Java Plug in has to be down loaded to run the applet.
Hope this will help you.
Anil
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support

Similar Messages

  • Anyone know where can download some dissertation adout adobe bridge plug-in?

    anyone know where can download some dissertations about adobe bridge plug-in?I`m vexationing and afflictioning ...........

    So yes from what I gathered on the phone support call, the update would download and fail during the install.  The support person did a remote desktop session where they dug through tmp folders checking various log files, etc.  They downloaded and tried installing some other type of patch.  No go. After an hour or so they threw up their hands.  I did a search for that to see if they followed up with a case # for the call, and I couldn't find it.  Either they didn't send me one or I accidentally deleted it (but it's not in my trash/archive so doubt that).
    Prior to the support call, I did a chat session, which was dropped because a link loaded into the session, ending it.  That was after I had been troubleshooting with them for about an hour.  Frustrating.  So I opted to call in instead of chat, see above.  The case # on that chat is #0185619250. I didn't follow up on it since I went the call route.  Here's another case I found on my acct, dealing w/ this matter.
    0185699971
    Btw, here's the full error msg I get when installing the PS CC 2014 update.  This is the same error I've been getting more over a month.  Thanks
    Exit Code: 34
    Please see specific errors below for troubleshooting. For example, ERROR:
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 0 error(s)
    FATAL: Payload 'Camera Profiles Installer_8.4_AdobeCameraRawProfile8.0All 8.0.0.15 {5459CCC0-6197-4FC0-AB3B-33E4D5BC145C}' information not found in Media_db.

  • SAP authentication plug-in needs to have been selected during the installation

    Can anyone help me with an issue I have with the SAP authentication setup please. Unfortunately our BI 4.0 SP4 installation was installed without the SAP authentication being selected. On the setup document I have it says that the SAP authentication plug-in needs to have been selected during the installation. Does anyone know if it is possible to set this up retrospectively?
    The document can be found on the following link. Setting up the SAP plug-in - Business Intelligence (BusinessObjects) - SCN Wiki
    Thanks
    Simon

    Hi Simon,
        As Sebastian said, this is a default installation, but you must select the correct one that you need, I guess that Enterprise is the default one.
    Regards

  • According to Firefox 6 my Shockwave Flash plug in needs updating but it won't let me load the adobe site properly

    Addon Manager tells me that the Shockwave Flash plug in needs to be updated but the Adobe web page does not load and just hangs.
    It also tells me that the Quicktime plug in is out of date but altho' it will connect to the Quicktime web page it does not complete the loading process.
    I have also had problems accessing my Youtube channel adn have had to use a fix I found somewhere in support.mozilla that suggested using https instead of http. This works but why on earth have I had to do this? What has gone wrong with FF6?

    Here I am replying to my own question. For the 8 people who apparently also have these problems I have solved the Adobe Flashplayer one. Or at least I am assuming that there was a causal connection between what I did and the result but, then again, who knows?
    If you have IE on your system, make sure that the Flash Active X extension is installed and up to date. Then go through the rigmarole with Firefox and updating the Shockwave Flash. It should work.
    Still no idea about Quicktime.

  • I apologise in advance if this is not the right forum, but I need to do a reformat on this computer.  My question is, after deactivation of CC, PS, LR and Bridge do I need to uninstall them as well?

    I apologise in advance if this is not the right forum, but I need to do a reformat on this computer.  My question is, after deactivation of CC, PS, LR and Bridge do I need to uninstall them as well?

    If you are going to reformat the hard drive, wiping out all data on the computer, there is no need to uninstall.  Deactivation is enough.

  • Does "Bridge Web Gallery" need Java on hosting server to run?

    I have uploaded a web gallery made with Bridge CS6, but all I see is a white screen. the gallery works fine locally. I just spoke with my host servers tech support and all he can think of is that they doen't run Java on their servers because it causes them way too much trouble. All I see is Javascript in the resource folder and they have no issue with that.
    I'm on a Mac and as far as I know I'm running the lastest Java on my Mac as I updated it a few weeks ago. This is why I was wondering if I needed Java? Also I'm using Dreamweaver to upload the files to the server.

    workflow functions are also exposed via java api's. so you can have your web application in say iAS, weblogic, ibm websphere,... and display pages using the java api.
    the default workflow pages are generated using pl/sql api's. in this case you can get rid of pl/sql gateway.
    i myself have worked on implementations which developed the application using the java api's
    satish paul
    Thank you Fernando. I have been pointed out that there is a oracle plug-in for Microsoft IIS, enabling us to use it as the web server, Hence removing the need for Apache http server and the PL/SQL gateway.
    Many Thanks
    Nazeer Ahmad Syed.

  • DVI to S-Video & Composite plug cable needed for output to audio/TV system

    I'm in need of a DVI to S-Video and Composite plug cable to replace the Monster iTV Link cable I used with my 12" Aluminum PowerBook. (http://www.monstercable.com/apple/Computer.asp) I use it to output to my audio/TV system.
    Whereas the PowerBook used a mini-DVI port and had the audio output jack on the same side of the computer, the MacBook Pro uses a full size DVI port and has the audio jack on the opposite side!
    I've been unable to find a cable so that I can connect up to a TV. Does anyone know where I can find one? Or perhaps a DVI to mini-DVI adapter? Or perhaps a VGA to S-Video/Composite cable and I can use the DVI to VGA adapter that came with the computer?
    This is very frustrating!

    Apple's video adapters have a ROM chip inside them with EDID data contained within the ROM. That is one thing that will definitely be different between the two. The NTSC and PAL version (M9267G/A) gives priority to NTSC. This could cause problems in a PAL country. If you hooked a PAL TV up using this adapter, you might get a rolling (non-synced) screen and you'd have no good way to recover since the image on the screen would be unusable.
    I don't think one adapter would have any advantage over the other in terms of PAL picture quality. It would just be a question of compatibility as outlined above. That's my best guess.

  • SOAP to JMS using Sync/Async bridge - configuration confirmation needed

    Hi group,
    Since I'm experincing error in a scenario using sync/async bridge in jms adapter I really would like a confirmation on my configuration.
    For a simple SOAP to JMS scenario is it then correct that all I need is;
    1) 2 synchronous message interfaces, 1 inbound and 1 outbound
    2) 1 Receiver determination
    3) 1 Interface determination
    4) 1 Receiver agreement (JMS adapter with module configuration)
    5) 2 Sender agreements (in my case 1 soap and 1 JMS adapter - the later with module configuration).
    6) The sender and receiver JMS adapters point to different MQ queues (request and response queues)
    7) The sender agreement for the JMS adapter uses my synchronous, inbound message interface (isn't this really just a "dummy" to actually fetch data from response queue - meaning that the actual utilized business system/service, MI and namespace are unimportant, since the module will make the adapter notify the listening module in the receiver JMS adapter?)
    Best Regards,
    Daniel

    Hi, thanks for your reply.
    I'm familiar with the links provided. I believe everything is configured as it should be, but since I get error I would like to have my configuration confirmed. Neither the weblog (or SAP guide) are detailed enough to convince me 100% that my configuration is correct. Surely the problem could be on the MQ side, but before going into that, I want to be sure that its not on XI-side.
    So I really would like confirmation on the steps/question that I wrote:-)
    Best Regards,
    Daniel

  • WEbsite says "plug-ins needed to view this content" how do I know what plug-ins to load?

    I read a newspaper on line and the page by page version seems to require a plug in as noted in the subject line. When i hover the cursor over the site to activate the page version, it says that a plug in is required. How do I know which one is required and how do I get it?

    Hello mapman, newspaper website ? probably you need flash player plugin, you can download from the next link the latest :
    http://get.adobe.com/flashplayer/
    close firefox before install flash player
    if flash plugin is not what you want, please report back to us.
    thank you

  • Built-in Input: Stereo plug-in needed?

    Hi
    I'm trying to use Audacity to convert cassettes to digital. I've hooked up a mono-to-mono line from my old monaural cassette's headphone jack player to my MB Pro's Built-In Input. However, I'm not getting any sound.
    Do I need a stereo adaptor to plug-in to the MB Pro?
    Btw, I believe the setup is otherwise correct since when switching to buiilt-in microphone I pick the tv, etc.

    Apple tends to use special jacks and expects at least stereo plugs. You can probably wire left and right together, but the plug length is likley to be important. Too short and it is "not there".

  • What additional plug ins needed for video

    http://veehd.com/video/3724046_Derren-Brown-Investigates-1
    says I need additional plug in to play.But no plug in shown when clicked. I already downloaded DivX Plus Web Player
    I then get a message that a manual install is available but that brings me to the media player page at http://www.divx.com/en/software/divx-plus and that is already installed. Tried downloading again and running and get a GUI saying its installed. see screenshot below

    Thanks cor -el. I cannot check options as i cannot open the player. It says it is there as in screenshot but when i look in C:\program Files\Divx it is not there. it does not show in a search of the start menu either

  • Special plug-in needed for Microsoft Browser?

    What is the story on AWT vs Swing?
    I nderstand that you needed a special plug-in and a spedcial HTML tag in order to run JFC and/or Swing on a Microsoft Browser... true?
    But I also understand that Swing is better than the AWT as it is all written in Java and don't rely on platform specefic libraries... true?
    I want my Stand-alone Java application and my web-based Java application to run on all machines and have good looking windows...
    Maybe my source is old but I need to know... Which should I use... AWT or Swing?
    thanks for any help - Will

    I'd like to add an Oracle BI plug in for Microsoft Word 2007 No worries, just run "OracleBIOffice.exe -AddOracleBIpluginWord"...

  • Complicated file renaming in Bridge...need help

    I am editing and exporting thousands of files in Photoshop at various sizes. Photoshop export adds sequential numbers to the file name which I now need to remove. I'm trying to use the Batch rename in Bridge but have not yet been able to configure the result I want. I need to maintain the first and last portion of the file name which varies from file to file. Example:
    48x48-_0000_2b.png
    48x48-_0001_2o.png
    48x48-_0002_4g.png
    I only need to remove the "_0000_" sequential portion in the middle. The last portion of the file name is a code which changes from file to file so I don't think renaming will work.
    Can I do this is Bridge? I called support and they said it was not possible to remove a portion of the name, however I could rename the file using Tools > Photoshop > Batch. I run into the same problem where I don't see how to remove the sequential portion and keep my unique codes at the end.
    Also, what is the difference between that and Tools > Batch rename?
    Thanks if anyone can help or suggest another tool to accomplish this.
    Katie

    >Would be nice if that option was available in Bridge
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests

  • Camera RAW plug in needed.

    I have PSE6 installed on my MacBook Pro - OSX 10.6.8 (SnowLeopard) - and I now have a Fujifilm HS20 EXR, but I cannot use the RAW mode as PSE6 doesn't recognise my RAW files.
    Where can I get a Camera RAW plug-in update that will allow me to carry on using the RAW facility on my new camera ?

    To use your raw images in PSE6 you would need to download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.3
    Mac download click here DNG Converter 7.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Get Plugin Finding Service Error for weeks & weeks now - can't update plug-ins, need download .pdf doc, but says adobe unstable, plug-in needs update. now what

    Want to download .pdf doc, but pop-up says it's unstable, need update plug-in. Tried to update, got error message, with "try later". Same for weeks now. Tried check for updates, Firefox is up to date, clicked update plug-ins... it tries, then again... same error message: "Plugin Finding Service Error. Please try again later".
    Been so long now -- when becomes a mighty big question. Looked in forum, no joy.
    Please, can someone tell me -- what's the go. I'm absolutely no good with computers, but this needs to get fixed. Should I stop using Firefox or what?
    Thanks for your help.
    Happy 2013 to all.
    PS. (added a couple days later)
    I'm told I should have added my next question in reply to TylerDowner here, instead of as I did. Sorry if that's so (really?) but I didn't even realize I could edit this.
    So... TylerDowner, thanks very much for your reply, and please would you -- or anyone else who might be able to help -- see my first reply to you below. (seems a waste to slot in here again)
    Feelin even dumber, (ha-ha)
    raaraa

    Tylerdowner -- >> thank you << for your reply, and my sincere apologies for this delayed response (probs, hospital, blah-blah, you don't want to know).
    Have tried to download via that link but not sure if successful. Very slow dial-up connection is the pits. Waited hours 'n hours, fell asleep in chair even, finally had to give in and go to bed, left it going. Server does time out every 8-12 hours, so not sure how long it went. The download appeared complete -- ie, did not show any note of failure. Not sure if it would -- some things in the past haven't.
    Anyway, had success downloading one much older .pdf file, but the link for one I wanted had expired, and I don't know anything else to try. Tried a couple of other links I have, not sure of age of file -- on clicking link, the browser opened, but nothing more happened.
    Wondering -- is the download available in separate pieces instead of one big one? Perhaps worth trying again that way?
    Please, if you would be forgiving, and persist with me a little further/longer -- would you make your recommendation/s for next step/s please?
    Hope you're in a safe, comfortable place. So many places in the world suffering with extremes of all kinds.
    R...

Maybe you are looking for