Bridge Preview Images not showing changes made in ACR

Suddenly my raw (Nef) files in Bridge are not reflecting the changes I make to them. In other words after downloading from my CF card, I work on raw files in ACR either one at a time or sometimes applying changes across several pictures. The changed files show up in Bridge briefly and then revert back to the unchanged looking raw. All changes actually exist because if I open the file in ACR or PS they appear just fine. In Bridge however, no changes including cropping, etc. show up. When I open Bridge the files are fine for a moment and then they revert to the uncorrected raws. I can also go to View and hit "refresh" and they will all show the proper changes for an instant and then revert to the original state again.
I've tried resetting preferences, purging and rebuilding cache, deleting temp files, removing and re-doing xmp files, expanding cache size and all the various rendering options in Prefs. Nothing works.
I cannot use the Bridge Light box or Preview function to compare photos because the corrections I made aren't there to be seen. The only way to see them is to open each file one at a time in ACR. This problem has forced my workflow to a crawl as I have to edit one pic at a time without being able to compare two together. Any help would be appreciated.

Hi All:
I had similar problems plus constant crashes that made Bridge unusable.
It drove me to try alternatives to bridge and to try Lightroom. I like
Lightroom better than bridge but it has an operational limit that leads me
to be reluctant switch. But here is the rub, now Bridge is working
perfectly! What I think fixed Bridge is running a disk/registry cleaner
called Ccleaner multiple times. I ran it almost every day for a week. It
found lots of stuff in my registry that it didnt like but as time went by
it found less and less. It also let me turn on or off services that run at
startup. I shut off anything that I could see that I didnt need, like
Adobe downloader; I dont need automatic downloading, as I can do it
myself. The result is at some point Bridge started to work again. It has
stayed working for more than 2 weeks now without one crash. I dont know
what was fixed that did the trick but so far Im happy. Ccleaner is a
free program and can be found at http://www.ccleaner.com/. Its a live
program as there have been several updates since I started using it. Try
it; I think it worked for me.
John Passaneau
PS
After Bridge started to work again, I had to purge the cache and rebuild
it. I use cache distributed to folders as I keep my photos on a network
attached drive and access them from 2 computers and a local cache will not
work for me.

Similar Messages

Bridge Not Showing Changes made in Camera Raw

Hi I work on an iMac (Mac OS X, version 10.4.11), and am currently trialing CS4. My problem is that I have been processing Canon Raw files in Camera Raw, but when I view the images in the preview pane of Bridge, it is not showing the changes that I have made.
This is just a sudden problem. I have been working like this for ages in CS3, and it was even working properly in this trial version of CS4, but literally all of a sudden in the middle of processing a wedding shoot it stopped showing the changes. So half the images now show the changes but the rest do not, and it no longer shows any of the changes I make in Camera Raw
Does anyone have any answers to why this suddenly changed?
Cheers Da ni

DaniJumbo wrote:
This is just a sudden problem.
"Sudden" is usually a sign to trash your suddenly corrupted preferences. Hold down the option key as you launch Bridge.
You may also need to Purge the Cache for each offending folder through the Tools Menu in Bridge.
Also check your thubmnail options:

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

DNG files exported from LR4 not showing changes made when opened in PSE10?

I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again. I'm sure there's something I'm missing but can't figure it out. Thanks for any help!

I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

Bex iView does not show changes made in web templates

Hello,
I have a Bex iView that presents a web template which is exposed in two portals.
I made a certain change in the web template in portal A and I can see the change through the Bex iView in this portal.
I than transfered the change to portal B and I can see this change at the Web application designer's code when it is connected to portal B.
The problem is that I can't see the change through the Bex iView in portal B, it keeps presenting the old version of the web template. Also, if I preview it from WAD, which opens it in the portal, it shows the old version as well.
<b>I've already tried/verified the following:</b>
1. It's not a client related issue as it happens to all clients.
2. I have tried clearing both the client and the portal's pcd caches.
3. No cache whatsoever is configured in this iView's properties (Cache Level: None, Cache Validity Period: 0,0,0,-1, Allow Client-Side Caching: No).
4. When I run the iView in debug mode in the application integrator I can't see anything unusual I can think of. Also, I can see there that it points to the correct web template.
5. Retransported the web template from server A to server B.
What else can be done here? Any ideas...?

Hello,
did you resolve your problem ?
Best regards

.psd preview images not showing in desktop folders

Name, size, kind, etc text shows but no image of the files, in any of my folders that i look through with finder. Jpgs made from the psd's preview fine.. what gives?
PS 10.0.1
os 10.5.4

As was suggested previously, this is probably yet another incompatibility between Leopard and CS3 (which was written for Tiger).
If you organize and open your files from Bridge, you won't run into this problem.
Or wait for CS4.

Lightroom not showing edits made in ACR

I edited photos in Adobe Camera Raw from Bridge, but when I look at the same files in Lightroom, they do not appear to include the edits. I did verify that xmp files were created when I edited the files in ACR. Why is Lightroom not reading the xmp file and showing the edits?

I appreciate the detailed response. I have been told by a photography instructor that it makes sense to use both Lightroom and Photoshop together and that Lightroom is for end-to-end workflow (which Photoshop is not capable of). I was not aware that Lightroom is only designed for front-end workflow. Is there any formal documentation on this that I can read to understand the purpose of Lightroom?
The Adobe website has some good introductory videos. I think this is a great place to start:
http://tv.adobe.com/watch/george-jardine-on-lightroom/the-lightroom-catalog/
but the other videos can be found behind the Products and Channels links toward the top of that video's webpage.
The recommendation to use Lightroom with Photoshop, rather than LR on its own, is somewhat akin to recommending Bridge + ACR + PS, except it makes less sense to even think of using Bridge+ ACR on thier own without Photoshop. You can do a lot with LR on its own but not quite everything. On the other hand, those specific tasks which you cannot do in LR may be done using some other editing software than PS, including many cheap and even free alternatives, or using older versions of PS even if they are not ACR-compatible with your camera.
When you use Bridge, the Raw conversion and similar types of parametric editing are assigned to ACR and the rest is passed to Photoshop. Bridge cannot directly print or export without calling on another program or utility to do that. It can only view preview thumbnails and manage metadata and issue instructions to other software. ACR cannot paint, warp, use layers, etc - because it belongs to the same basic class of software, as Lightroom's Develop module capabilities.. in fact there is a very close functional correspondence between these two, and deliberately so; so that the image adjustment parameters involved can be inter-compatible.
When you use Lightroom, the Raw conversion and parametric editing can be very efficiently taken care of internally by LR so ACR does not need to be involved. This works especially well for dynamically applying edits across batches of images on the fly, previewing the effect of processing presets (recipes), making use of a full history of the changes applied to each image, and so on, You can print or export directly without leaving the parametric realm, a little as if you were able to do so from inside ACR.
But when an image editing task is required that is not of this parametric kind (such as compositing, detailed retouching other than a little dustspotting, etc) then just as Bridge can pass an image into PS that will be saved as a new file version, Lightroom can also do the same using its own workflow that does not involve Bridge.
The method is very simple: a new LR image version is created based on a brand new working file saved to disk. Ctrl+E or right-click and select "Edit in... Photoshop". and your image as it currently appears in LR, is automatically opened inside PS. Save when you are finished, and the PS-edited changes appear inside LR transparently. Then you carry on working with that, in the same way as for any other image inside LR,
RP

Bridge CS5, Ver. 4.0.5.11. : miniatures do not show adjustments made in CameraRAW

Since some time now my Bridge miniatures do not show adjustments and changes I made on my RAW files in Camera RAW. Can someone help?

By minitures you are talking about thumbnails, you most likely have them set to embedded. To show edits to RAW you need one of the HQ options. But beware they take a lot more file space and are slower to build. To change options it is a icon in lower toolbar on right side.

Bridge CC is not showing Indesign CC 2014 file previews

Bridge CC is not showing previews of InDesign CC 2014. I don't see an update for Bridge anywhere. What am I missing?

Welcome to the forum,
Not sure if it's the issue or if it will help, but you could try purging the cache, etc..
http://helpx.adobe.com/bridge/using/adobe-bridge-workspace.html
Restore preferences
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.
If that does not help, you may try searching the Bridge forum or asking there.
http://forums.adobe.com/community/bridge

In iphoto, when I click on Print, the preview image it shows me is an enlarged section of my photo. I cropped the photo and checked with no restraints. Once the photo goes to Print, I can't fix it back to the way it is in iphoto.

In iphoto, when I click on Print, the preview image it shows me is an enlarged section of my photo. (In iphoto I hadI cropped the photo and checked "with no restraints." )
Once the photo goes to Print, I can't fix it back to the way it is in iphoto.

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

BLOB image not shows in JSP page!!

Hi Dear all,
I had tried to configure how to show BLOB image to jsp page . The code are works fine and servlet works ok but image can not show only. can you help me that what need to be added. Please help me.
Can any experts help me? BLOB image not shows in JSP page. I am using ADF11g/DB 10gR2.
My as Code follows:
_1. Servlet Config_
    <servlet>
        <servlet-name>images</servlet-name>
        <servlet-class>his.model.ClsImage</servlet-class>
    </servlet>
    <servlet-mapping>
        <servlet-name>images</servlet-name>
        <url-pattern>/render_images</url-pattern>
    </servlet-mapping>
3. class code
package his.model;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Iterator;
import java.util.Map;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
public class ClsImage extends HttpServlet
//private static final Log LOG = LogFactory.getLog(ImageServlet.class);
private static final Log LOG = LogFactory.getLog(ClsImage.class);
public void init(ServletConfig config)
    throws ServletException
    super.init(config);
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
    throws ServletException, IOException
    System.out.println("GET---From servlet============= !!!");
    String appModuleName = "his.model.ModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleName");
    String appModuleConfig = "TempModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleConfig");
    String voQuery ="select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = 'P1000000000006'" ;// 'P1000000000006' this.getServletConfig().getInitParameter("ImageViewObjectQuery");
    String mimeType = "jpg";//this.getServletConfig().getInitParameter("gif");
    //?IMAGE_NO='P1000000000006'
    //TODO: throw exception if mandatory parameter not set
    ApplicationModule am =
      Configuration.createRootApplicationModule(appModuleName, appModuleConfig);
      ViewObject vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
    Map paramMap = request.getParameterMap();
    Iterator paramValues = paramMap.values().iterator();
    int i=0;
    while (paramValues.hasNext())
      // Only one value for a parameter is expected.
      // TODO: If more then 1 parameter is supplied make sure the value is bound to the right bind
      // variable in the query! Maybe use named variables instead.
      String[] paramValue = (String[])paramValues.next();
      vo.setWhereClauseParam(i, paramValue[0]);
      i++;
   System.out.println("before run============= !!!");
    // Run the query
    vo.executeQuery();
    // Get the result (only the first row is taken into account
    System.out.println("after run============= !!!");
    Row product = vo.first();
    //System.out.println("============"+(BlobDomain)product.getAttribute(0));
    BlobDomain image = null;
    // Check if a row has been found
    if (product != null)
      System.out.println("onside product============= !!!");
       // We assume the Blob to be the first a field
       image = (BlobDomain) product.getAttribute(0);
       //System.out.println("onside run product============= !!!"+image.toString() +"======="+image );
       // Check if there are more fields returned. If so, the second one
       // is considered to hold the mime type
       if ( product.getAttributeCount()> 1 )
          mimeType = (String)product.getAttribute(1);
    else
      //LOG.warn("No row found to get image from !!!");
      LOG.warn("No row found to get image from !!!");
      return;
    System.out.println("Set Image============= !!!");
    // Set the content-type. Only images are taken into account
    response.setContentType("image/"+ mimeType+ "; charset=windows-1252");
    OutputStream os = response.getOutputStream();
    InputStream is = image.getInputStream();
    // copy blob to output
    byte[] buffer = new byte[4096];
    int nread;
    while ((nread = is.read(buffer)) != -1)
      os.write(buffer, 0, nread);
      //System.out.println("Set Image============= loop!!!"+(is.read(buffer)));
    os.close();
    // Remove the temporary viewobject
    vo.remove();
    // Release the appModule
    Configuration.releaseRootApplicationModule(am, false);
} 3 . Jsp Tag
<af:image source="/render_images" shortDesc="Item"/> Thanks.
zakir
====
Edited by: Zakir Hossain on Apr 23, 2009 11:19 AM

Hi here is solution,
later I will put a project for this solution, right now I am really busy with ADF implementation.
core changes is to solve my problem:
    byte[] buffer = new byte[image.getBufferSize()];
    int nread;
    vo.remove();
    while ((nread = is.read(buffer)) != -1) {
      os.write(buffer);
    }All code as below:
Servlet Code*
public void doGet(HttpServletRequest request,
                    HttpServletResponse response) throws ServletException,
                                                         IOException {
    String appModuleName =
      "his.model.ModuleAssetMgt";
    String appModuleConfig =
      "TempModuleAssetMgt";
String imgno = request.getParameter("imgno");
    if (imgno == null || imgno.equals(""))
      return;
    String voQuery =
      "select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = '" + imgno + "'";
    String mimeType = "gif";
    ApplicationModule am =
      Configuration.createRootApplicationModule(appModuleName,
                                                appModuleConfig);
    am.clearVOCaches("TempView2", true);
    ViewObject vo = null;
    String s;
      vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
    // Run the query
    vo.executeQuery();
    // Get the result (only the first row is taken into account
    Row product = vo.first();
    BlobDomain image = null;
    // Check if a row has been found
    if (product != null) {
      // We assume the Blob to be the first a field
      image = (BlobDomain)product.getAttribute(0);
      // Check if there are more fields returned. If so, the second one
      // is considered to hold the mime type
      if (product.getAttributeCount() > 1) {
        mimeType = (String)product.getAttribute(1);
    } else {
      LOG.warn("No row found to get image from !!!");
      return;
    // Set the content-type. Only images are taken into account
    response.setContentType("image/" + mimeType);
    OutputStream os = response.getOutputStream();
    InputStream is = image.getInputStream();
    // copy blob to output
    byte[] buffer = new byte[image.getBufferSize()];
    int nread;
    vo.remove();
    while ((nread = is.read(buffer)) != -1) {
      os.write(buffer);
    is.close();
    os.close();
    // Release the appModule
Configuration.releaseRootApplicationModule(am, true);
}Jsp Tag
<h:graphicImage url="/render_images?imgno=#{bindings.ImageNo.inputValue}"
                                                    height="168" width="224"/>

Another Images not Showing up thread

I know there are multiple threads out there about images not showing up on the login page of application express, and I have browsed most of them without success.
My images folder is in:
C:\oracle\product\10.1.0\db_1\Apache\Apache\images\
My dads.conf file has specified:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
Address of missing image in I.E. is:
http://<host>:7777/i/htmldb/apex_logo.gif
When I ran @apexins I specified /i/ for the virtual images directory.
I am running Oracle Database 10gR2, with Oracle HTTP Server that came with the Oracle Database 10g Companion CD Release 2.
I am using APEX 3.2.
When I try to go to
http://<host>:7777/i/
I get:
You don't have permission to access /i/ on this server.
I also cannot login to APEX. When I type my username/password and click the Login button, it does nothing (nothing loads, nothing changes... nothing happens). I don't know if this is related?
Thank you,
~Tom

I found the problem -
In my dads.conf file I had:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
When I really needed:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images/"
Note the end slash after images changed from backslash to forward.
Silly me.

Preview does not show any postscript files

Preview does not show any .ps files in Mac OS 10.4.3. I get an error message "PostScript Conversion Error" when Preview tries to convert the ps file into pdf.
(I print online banking invoices to postscript using the print option "save as file", because the pdf option isn't always available as a file format.)
How can I view my ps files?
(this is a cross-post from the print/fax forum, as no one answered my question there)

Thanks for the tip. I downloaded Ghostscript, installed it but can't find it once installed and nothing has changed.
I did however find out that only my online banking PostScript files are unreadable. Other PS files I create with my Canon printer menu are automatically converted into PDF by Preview without a problem. So it must have something to do with the document header or whatever of the online banking files.

Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>../crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>web</param-value>
     </context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM

Images not showing in the jlabel/jbutton

Hello all,
I've a package in which my cards directory is located along with all my src files and compiled classes. All my images ****.gif files are inside this directory.
Then I've following the icon object.
protected static JLabel lblDeck;The following code is used to get the image.
String imgPath;
     imgPath = isImageExists("imgBG1.gif");
          if (imgPath == "")
          {     // If the image of Card Deck(imgDeck) is not Found
               lblDeck = new JLabel();
               lblDeck.setBackground(new Color(0, 64, 128));
               lblDeck.setOpaque(true);
               flagImgDeckFound = false;
          } else {
               // If the image of Card Deck is Found
               imgDeck     = new ImageIcon(imgPath);
               lblDeck = new JLabel(imgDeck);
// Check if the image exists else return "";
protected String isImageExists(String imgName) {
          java.net.URL imgURL = getClass().getResource("cards/" + imgName);
         if (imgURL != null)
         {     return (imgURL.toString());     }
         else
              JOptionPane.showMessageDialog(null, "File not Found: " + imgURL);
              return "";
     }I'm still unable to get the image in the jlabel!
When i checked the path, it is exactly returning the path of the file.
But its neither loading the image into the jlabel nor is it returning "".
This is just the label part i've other jbuttons also. Even they are not displaying any images.

aLkeshP wrote:
can everyone see this thread?
YES FER-CHRISE-SAKE.
Just how many times do you intend posting the same identical question?
images not showing in the jlabel/jbutton
Problem in imageicon
iconImage on JButton & JLabel
Re: images not showing in the jlabel/jbutton

Bridge Preview Images not showing changes made in ACR

Similar Messages

Maybe you are looking for