Bridge Problem (2 copies)

I seem to have two bridge programmes one in Photoshop CC and one as an add on can i get rid of the add on ?

Ok, when you do a fresh install from the cloud, it will first install the adobe manager. In the adobe manager you can choose to install Bridge CC. That is the only one listed, unless you previously had CS6, In that case Bridge CS6 will also be listed. There is nothing to install for the mini bridge it is part of photoshop. Actually it is a plug in that requires Bridge to work.
What may have confused you (guessing here) is from the cloud you choose Bridge. It is the same as I mentioned before, it only installs the manager and then from the manager you can install the remaining software including bridge.
I think the reason why they are all listed on the cloud is for promotion, it looks like there is a lot on the cloud. When in fact all the links only install the manager. (Thats my opinion and I have not verified it)

Similar Messages

  • When i open pc an adobe bridge problem denotes purging

    when i open computer an adobe bridge problem denotes purging

    Are you trying to say that pointing to your computer in Bridge you get an error message telling you that you need to purge the central Cache?
    If so, go ahead and purge it.
    Your post is not clear at all.  Try rephrasing it, please.
    Also:
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • CS6 Bridge and Mini Bridge problems

    Installed CS6 and clicked on Brose in Bridge.  I get the rror messare could not complete the Brose in Bridge commmand because Photoshop was unable to find the Java Script plugin.  Also when clicking on Brose in Mini Bridge I get the message cannot complete the command because the extension could not be loaded  I have uninstalled CS6 and reinstalled it and get the samew message  Help please

    Thank you very much  I will try that
    In a message dated 11/24/2014 12:41:45 P.M. Central Standard Time, 
    [email protected] writes:
    CS6  Bridge and Mini Bridge problems
    created by Flashy1995_ (https://forums.adobe.com/people/Flashy_1995)  in 
    Photoshop General Discussion - View the full  discussion
    (https://forums.adobe.com/message/6958475#6958475)

  • Problem in COPA ( Urgent)

    Hi All,
    I have a problem in COPA. The issue is-
    There was a mistake in SD Billing copying controls, it allowed the item category ZBC1 Batch item category to copy to the billing document. The item did not have any quantity or value, but it had cost, so double entries went to COPA. Copying controls have since then been adjusted back, but copa needs to be adjusted for all companies.
    First of all how does the customer best find the double entries?
    Should the correction be made from SD side by creating credit and debit memo?
    Or can the correction be done by creating new entries in COPA with eg KE21N?
    Please can any one let me know shall the entries be made in COPA. IF yes how to solve the issue

    Hi Sridhar,
    I have executed transaction KEAT.
    The total cost of goods traded is showing as 23784.76. But the actual cost was 11,892.38. ( Its showing as double, since copying control was active). And when i go to T.code VF02 the invoice is showing two line item
    1) 1st line item contains quantity+ cost ( 11892.38)
    2) 2nd line item conatins Quantity (0) + cost ( 11892.38)
    Now i need to reverse the second line item in COPA? can this be done by KEAT or any other transaction. Please let me know as i have never used KEAT
    Thanks

  • Answers to common Bridge problems.

    Here are user-submitted answers to common Bridge problems.
    I invite all suggestions to addition/corrections/improvements.

    Bumped. I'll convert to document once it will be possible to do so. I have great addendum by CurtY:
    Windows and Mac FAQ and Translation Key
    Keystrokes
    ALT on a Pc = Option on a Mac (On some keyboards (UK), the Option key is labeled with Alt. )
    CTRL (Control) on Pc = Cmd (Command) on a Mac, the key has the following symbol: ⌘
    Right-click on a Pc = Right-click on a Mac, or Control+Click on machines without a mouse.
    Menu differences
    Preferences (CMD+K) are found on the Photoshop menu on a Mac, at the bottom of the Edit menu on a PC, and the shortcut is (CTRL+K).
    On the same Photoshop menu on a Mac, one can find About Plug-ins... and About Photoshop, while they are located on the Help menu on a PC.
    Quit Photoshop (CMD+Q) is also on that Photoshop menu on a Mac, while Exit (CTRL+Q) can be found at the end of the File menu on a PC.
    Preferences location on the hard drive. There is a full document on that topic: http://kb2.adobe.com/cps/828/cpsid_82893.html
    but basically: The main preference file, is on both plaform  Adobe Photoshop CSx Prefs.psp it is located, alongside most other preferences on:
    Mac location: Users/[user name]/Library/Preferences/Adobe Photoshop CSx Settings
    Windows XP: Documents and Settings/[user name]/Application Data/Adobe/Adobe Photoshop CSx/Adobe Photoshop CSx Settings
    Windows 7 and Vista: Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CSx
    Settings Keywords
    pc = C:/Users/user name/AppData/Roaming/Adobe/BridgeCSx/  (note: to view AppData  turn on hidden file option)
    Mac = (your computer name)/ Library / App Support / Adobe / Bridge CSx / Adobe
    Camera Raw location  NOTE:  Should be only one file here.
    PC = Program Files/COMMON Files/Adobe/Plug-ins/CSx/File Formats which gives you Camera Raw.8bi
    Mac = /Library/Application Support/Adobe/Plug-ins/CSx/File Formats/
    Photoshop Actions
    Mac -  Actions (not saved) Actions panel.psp  Users/[user name]/Library/Preferences/Adobe Photoshop CSx Settings
    Mac -  Actions (saved) Actions panel.atn   Program Files/Adobe Photoshop CSx(64bit)/presets/actions
    PC -  Actions (not saved) Actions panel.psp  Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings
    PC -   Actions (saved) Actions panel.atn   Program Files/Adobe Photoshop CSx(64bit)/presets/actions

  • Beans - Active-x Bridge - Problems!

    Hi,
    I developed an ip address bean based on JTextField (JDK 1.3.1_02), successfully packaged it as an active-x control using the packager and instructions in the active-x bridge tutorial.
    The control has all sorts of problems under visual basic: to name a few:
    1. The caret seems to disappear when the control receives focus
    2. The tooltips dont seem to show up.
    3. The focus lost event does not seem to fire in the control.
    Is it worth for me to trace these issues or is the activex bridge not really practically used by anybody ?
    Thanks in advance,
    Vishy

    Vishy,
    Did you by any change find a solution to your ActiveX Bridge problem, I'm stuck with the same shit..
    Thanks,
    Harvey
    P.S. Maybe nobody works with this technology except maybe none-visual components?

  • Virtualbox bridging problem

    I post this a second time, this time more precisely
    Op. System is: Archlinux 64bits
    uname -a:
    Linux archie 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz GenuineIntel GNU/Linux
    so
    I've installed virtualbox_bin 3.1.0-1 from AUR (the only way possible on a 64 bits opsys, besides the install stuff from Sun)
    Followed the installation given on the Arch Wiki
    I've tried all three methods ( vbox way, arch way, general ) to get bridged networking to work
    ( I'm a lazy guy, I prefer the Vbox way, all my modules are loaded)
    All my VMs are running fine with NAT, everything works,
    but bridging produces a strange error:
    Clients get network adresses via DHCP,
    even fixed IP settings work,
    I can ping ABSOLUTELY ANYTHING
    but no internet connection!
    I have observed the (physical) network card with Iptraf of the HOST machine, the result is strange:
    ICMP packets go through but no TCP/IP communication is possible between my hosts and the exterior world
    AH, I forgot the most interesting one, I've an archlinux VM too, HE IS WORKING FINE, EVEN IN BRIDGED MODE!!!!
    Is that a bridging problem?
    Is that a kernel problem? ( Vbox worked well with the latest kernel - 2.6,30 -, if I remember well...)
    What the hell is going on there?
    ( I really need bridged network, as I use Vbox essentially for network testing purposes)
    Please, help!

    After three weeks of research I have found lots of people having trouble with Virtualbox bridged and host-only networks
    the (partial ) solution is to change the virtual network card, for me Intel Desktop M worked fine with my Debian guest
    but Ubuntu doesn't want to do anything with it
    for some people it works, for others it forks for a while, for others it doesn't work at all...
    Buggy stuff

  • Problem with COPA extractor 1_CO_PA ...

    Hi all,
        I am facing a problem with COPA extractor where delta is bringing in records which have been commited to database more that 6 hours ago.  I understand that according to a note that COPA extractors have a default safety interval of 30 minutes but 6 hours is too much.
    Is there any way I can change that?  Is there any customizing option?  Note 392876 explans how to change the safety interval to 5 minutes but I dont know if it is applicable for our patch level? 
    We are at PI->2004_1_500 patch SAPKIPZI69.
    Also the safety limit is also maintained in ROOSOURCE-DELTASAFE2 field, should I just change it there?
    any help is appreciated...
    thanks

    I see that you are not so novice!
    Please, how can I check the time and time zone in R/3 and BW?
    Thank you in advance

  • Adobe Bridge problem

    To whom this question may be directed to:
    Please gidet me in resolving my problem with TRYING to open a file in Adobe bridge CC only to be presented a message telling me that it can NOT be opened because CS 5 is no longer on my computer of which I already know. Although if I go into explorer I can double click it and it opens into Photoshop CC fine.
    ANYONE with an soultion to this problem and is WILLING to share the information I would be EXTREMLEY appreciateive.
    Thank You in advance for taking the time to reply
    Regards
    Bill

    Curt,
    Once again thank you for being paitent with me in trying to resolve thsi problem, I am having a bit of confusion with trying tounderstand just what ext you are refeerring to.
    I go to preferences and see all the exttions BUT do not understand which one I need to select and when I do select it do I then go to reset all defauls option?
    I apoligize for seeming ignorant in this discussion but i am not grasping this procedure correctly I assume.
    Thanks again for your assistance
    Bill

  • S/A bridge problem: No object type found for the message

    Hi all,
    I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
    This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
    I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
    So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
    <i> <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error></i>
    It seems that the adapter cannot find any integration process to send the message into!?
    I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
    Any help would be greatly appreciated for I'm all out of clues....
    Bob

    First of all, Thank you for trying to help me out here.
    Some answer to your suggestions/questions:
    The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
    I've checked the BPM for syntax errors. I doesn't have any.
    I've reimported the BPM into the integration directory.
    And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
    I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
    The other steps execute just fine...
    The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
    Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
    So i can not debug the IP in the PE and check container variables, like some of you mentioned.
    Maybe some more information about the scenario:
    The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
    Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
    This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
    This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
    The message (container var)  used in this step is
    name: CORREQ
    Category: Abstract interface
    type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
    The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
    Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
    name: CORRES
    Category: Abstract interface
    type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
    The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
    I hope this information gives you guys a better understanding of hte problem.
    Really looking forward to see more suggestions and to solve this nasty problem ...
    Regards,
    Bob

  • Scenarion of Delta Load problem in COPA Extraction

    Please get me the solution for this particular scenario.
    Let us suppose that i created the datasource some 1 year back and running the deltas successfully since then.
    Let us number the requests from 1,2,3... and so on since 1st jan 2009. And let us suppose each request loads
    some 1000 records everyday from ECC to BI.
    Now on 10th august some change was made to ECC( such as change in the User Exit ) that caused the mismatch in number of data records ( loading only 950 records ) since the change was made on 10th August. But I identified the problem on 17th august with request number 160. Let us say those request numbers are 153(10th),154(11th),155(12th),156(13th),157(14th),158(15th),159(16th),160(17th). I fixed the program in ECC on 17th and further the requests from request number 160(17th) are fetching the correct number of data records. Now I need to delete the data in BI for request numbers 153 till 159 since they are not reconciling the data of ECC with BI. Now  we reload the deltas for such requests from ECC to BI. So how do I reload the deltas now in this scenario since ECC system keeps track of the last delta ie.. on 17th august(Req no 160). But how do I Load the deltas from req number 153 to 159 from ECC to BI.
    One proposed solution to this problem was setting the timestamp of COPA to 10th august. But it is not advised to set the timestamp for COPA datasources using the KEB5 transaction in a production system.
    Now in this scenario how do I load the request numbers 153 to 159 from ECC to Bi to fetch the correct data records for that period. Please propose a solution for this problem ASAP. U can also call me back whenever u need.
    Thanks in advance

    As stated in a previous post...
    How you choose to do this can be summed up by the question: Does the target for this data have cumulative or non-cumulative Key Figures?
    If you are doing an overwrite to the Key Figures, you could just execute a Full Repair InfoPackage that extracts the data for the days that you found inconsistencies instead of attempting to change the timestamp in KEB5 on the source ECC environment.
    However, if you're target has cumulative Key Figures you're left with very few options (a couple of them are time-consuming):
    1) Changing the timestamp in KEB5, if your plug-in is PI 2003.1 or older. Newer versions of the plug-in do not allow the changing of the timestamp as was pointed out by Ferruccio earlier.
    2) Deleting the keys in the target InfoProvider for those records that you extract in a Full Repair extract.
    3) Delete all data in BW for COPA and start from the beginning. This may be your best bet for cleaning up the issues in this scenario.

  • Problem in COPA re-initialization - Kishore Seereddi

    Hi Kishore or other Gurus,
                   I have an issue on my COPA values. KE24 doesn't reconciled with the values on my COPA cube. My initial conclusion is that some of the records created on October 2, 2008 and posting date on September 30, 2008.
                   Is there an issue with the creation and posting date? or is there an issue on reinit because there is a reinitialization happen on October 2, 2008. I am not the one who do the reinitialization I am just supporting the issue.
                  I mentioned Kishore here because I read on the thread below that he mentioned that we need to run the delta load up to 3 times the delta load retrieved only 0 records before doing init without data transfer and full repair. What is the reason behind these?
    Re: COPA Enhancement and Reinit of Delta
                 I asked because the guy who re-init the data delete the records of the cube and then just do init without data transfer and then full repair.
                 Then the data where not synched between KE24 and COPA. The datasources is 1_COPA****.
                 Hope you can help me asap. I will assign points asap too.
    Thanks and regards,
    Raymond
    Edited by: Raymond Dela Cruz on Oct 27, 2008 11:20 AM

    Hi,
    As i understood that the Delta need to be loaded for 1 or more time in case of LO dataextraction, by doing so we clear the delta queue in LBWQ T-code. so this will not cause problem duplication of records in our next delta extraction.
    For the CO-PA and FI the extraction method is different in compare to LO extraction. so there is no need to do the delta extraction before reinit of data.
    Please check your filters in KE24 and BW are same during reconciliation. Because selection filters are important in COPA.
    If you are looking for sales information, in KE24 check the corresponding invoice numbers created on date of intrest are available in COPA infocubes. this is one of the method.
    Regards,
    Vishwa.
    Edited by: Vishwanath H.E on Oct 28, 2008 12:55 PM

  • BPM - Receive Sync/ASync Bridge Problem

    Hi,
    I am creating a scenario for an inbound Synch request to be serviced by a BPM process.
    Here is the problem that I am facing while trying to configure the Receive Step
    - I created a Message Interface defined as Abstract Synchronous.
    - I created a process model and put in a Receive Step: Mode - Opens S/A Bridge, Synchronous Interface - defined as above.
    - I define a container with Abstract type. But when I try to locate the above defined Abstract Synch message interface, I cannot find it.
    - As a workaround, I create another Abstract Message Interface defined as Abstract ASynch.
    - I create a container with this Abstract ASynch message type.
    - I use this container in the Receive Step.
    But activating the Business Process gives the error:
    Message to be received and Synchronous Interface do not have identical types.
    Can someone give me the correct procedure to configure the Sync / ASync Bridge ? thanks,
    -Manish

    Dan,
    This is the link you are looking for?
    http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm

  • CS5 Design Premium Installation Adobe Bridge problem

    When I try and install CS5 Design Premium it fails because it wants me to close Adobe Bridge (which is not open) and won't let me go any further. I tried uninstalling CS3 but it won't let me because it wants me to close Adobe Bridge.
    What Now?

    There shoult be a Bridge icon in the system tray (bottom right corner), close Bridge from here and run the uninstaller or if you don't find this icon you can kill process Bridge.exe but this is not always the best way to overcome a problem. I would recommend closing the application from system tray icon.
    Thanks,
    Tahseen

  • Photoshop Bridge problem

    Bridge opens to Paint or Windows explorer on the first try when opening a photo. Subsequently pictures open to CS4 as they should.Bridge opened to Windows Explorer after Paint disabled. CS3 similarly affected after CS4 installed and CS2 removed.Problem persists.

    This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://www.adobe.com/support/techdocs/322391.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
         Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

Maybe you are looking for