Bridge problems

Bridge is constantly building criteria for 2 of my drives. How do I solve this?

Hi Curt,
Thank you for the suggestion. Unfortunately I don't understand exactly what you
mean or how to to this.
I tried uninstalling the version of Photoshop CS-5 that I was trying. I then
uninstalled Photoshop CS3 too. I reinstalled CS-3, then reinstalled the trial
version of CS5. Same result, I can only see part of one folder clearly, and
part is blurry. Then when I look at other folders I cannot see any images in
them.
Do I understand you to say that you can't have CS-3 and CS-5 versions
installed? If that was the case, however, they would not allow trial upgrades,
or any upgrades for that matter, since you can't upgrade to the newer version
without having an older version.
This is so frustrating - right now I can't use photoshop. I can upload images
to my computer. If I didn't need to see the images, I'd be fine!
Glenn

Similar Messages

When i open pc an adobe bridge problem denotes purging

when i open computer an adobe bridge problem denotes purging

Are you trying to say that pointing to your computer in Bridge you get an error message telling you that you need to purge the central Cache?
If so, go ahead and purge it.
Your post is not clear at all. Try rephrasing it, please.
Also:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

CS6 Bridge and Mini Bridge problems

Installed CS6 and clicked on Brose in Bridge. I get the rror messare could not complete the Brose in Bridge commmand because Photoshop was unable to find the Java Script plugin. Also when clicking on Brose in Mini Bridge I get the message cannot complete the command because the extension could not be loaded I have uninstalled CS6 and reinstalled it and get the samew message Help please

Thank you very much I will try that
In a message dated 11/24/2014 12:41:45 P.M. Central Standard Time,
[email protected] writes:
CS6 Bridge and Mini Bridge problems
created by Flashy1995_ (https://forums.adobe.com/people/Flashy_1995) in
Photoshop General Discussion - View the full discussion
(https://forums.adobe.com/message/6958475#6958475)

Answers to common Bridge problems.

Here are user-submitted answers to common Bridge problems.
I invite all suggestions to addition/corrections/improvements.

Bumped. I'll convert to document once it will be possible to do so. I have great addendum by CurtY:
Windows and Mac FAQ and Translation Key
Keystrokes
ALT on a Pc = Option on a Mac (On some keyboards (UK), the Option key is labeled with Alt. )
CTRL (Control) on Pc = Cmd (Command) on a Mac, the key has the following symbol: ⌘
Right-click on a Pc = Right-click on a Mac, or Control+Click on machines without a mouse.
Menu differences
Preferences (CMD+K) are found on the Photoshop menu on a Mac, at the bottom of the Edit menu on a PC, and the shortcut is (CTRL+K).
On the same Photoshop menu on a Mac, one can find About Plug-ins... and About Photoshop, while they are located on the Help menu on a PC.
Quit Photoshop (CMD+Q) is also on that Photoshop menu on a Mac, while Exit (CTRL+Q) can be found at the end of the File menu on a PC.
Preferences location on the hard drive. There is a full document on that topic: http://kb2.adobe.com/cps/828/cpsid_82893.html
but basically: The main preference file, is on both plaform Adobe Photoshop CSx Prefs.psp it is located, alongside most other preferences on:
Mac location: Users/[user name]/Library/Preferences/Adobe Photoshop CSx Settings
Windows XP: Documents and Settings/[user name]/Application Data/Adobe/Adobe Photoshop CSx/Adobe Photoshop CSx Settings
Windows 7 and Vista: Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CSx
Settings Keywords
pc = C:/Users/user name/AppData/Roaming/Adobe/BridgeCSx/ (note: to view AppData turn on hidden file option)
Mac = (your computer name)/ Library / App Support / Adobe / Bridge CSx / Adobe
Camera Raw location NOTE: Should be only one file here.
PC = Program Files/COMMON Files/Adobe/Plug-ins/CSx/File Formats which gives you Camera Raw.8bi
Mac = /Library/Application Support/Adobe/Plug-ins/CSx/File Formats/
Photoshop Actions
Mac - Actions (not saved) Actions panel.psp Users/[user name]/Library/Preferences/Adobe Photoshop CSx Settings
Mac - Actions (saved) Actions panel.atn Program Files/Adobe Photoshop CSx(64bit)/presets/actions
PC - Actions (not saved) Actions panel.psp Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings
PC - Actions (saved) Actions panel.atn Program Files/Adobe Photoshop CSx(64bit)/presets/actions

Beans - Active-x Bridge - Problems!

Hi,
I developed an ip address bean based on JTextField (JDK 1.3.1_02), successfully packaged it as an active-x control using the packager and instructions in the active-x bridge tutorial.
The control has all sorts of problems under visual basic: to name a few:
1. The caret seems to disappear when the control receives focus
2. The tooltips dont seem to show up.
3. The focus lost event does not seem to fire in the control.
Is it worth for me to trace these issues or is the activex bridge not really practically used by anybody ?
Thanks in advance,
Vishy

Vishy,
Did you by any change find a solution to your ActiveX Bridge problem, I'm stuck with the same shit..
Thanks,
Harvey
P.S. Maybe nobody works with this technology except maybe none-visual components?

Virtualbox bridging problem

I post this a second time, this time more precisely
Op. System is: Archlinux 64bits
uname -a:
Linux archie 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz GenuineIntel GNU/Linux
so
I've installed virtualbox_bin 3.1.0-1 from AUR (the only way possible on a 64 bits opsys, besides the install stuff from Sun)
Followed the installation given on the Arch Wiki
I've tried all three methods ( vbox way, arch way, general ) to get bridged networking to work
( I'm a lazy guy, I prefer the Vbox way, all my modules are loaded)
All my VMs are running fine with NAT, everything works,
but bridging produces a strange error:
Clients get network adresses via DHCP,
even fixed IP settings work,
I can ping ABSOLUTELY ANYTHING
but no internet connection!
I have observed the (physical) network card with Iptraf of the HOST machine, the result is strange:
ICMP packets go through but no TCP/IP communication is possible between my hosts and the exterior world
AH, I forgot the most interesting one, I've an archlinux VM too, HE IS WORKING FINE, EVEN IN BRIDGED MODE!!!!
Is that a bridging problem?
Is that a kernel problem? ( Vbox worked well with the latest kernel - 2.6,30 -, if I remember well...)
What the hell is going on there?
( I really need bridged network, as I use Vbox essentially for network testing purposes)
Please, help!

After three weeks of research I have found lots of people having trouble with Virtualbox bridged and host-only networks
the (partial ) solution is to change the virtual network card, for me Intel Desktop M worked fine with my Debian guest
but Ubuntu doesn't want to do anything with it
for some people it works, for others it forks for a while, for others it doesn't work at all...
Buggy stuff

Adobe Bridge problem

To whom this question may be directed to:
Please gidet me in resolving my problem with TRYING to open a file in Adobe bridge CC only to be presented a message telling me that it can NOT be opened because CS 5 is no longer on my computer of which I already know. Although if I go into explorer I can double click it and it opens into Photoshop CC fine.
ANYONE with an soultion to this problem and is WILLING to share the information I would be EXTREMLEY appreciateive.
Thank You in advance for taking the time to reply
Regards
Bill

Curt,
Once again thank you for being paitent with me in trying to resolve thsi problem, I am having a bit of confusion with trying tounderstand just what ext you are refeerring to.
I go to preferences and see all the exttions BUT do not understand which one I need to select and when I do select it do I then go to reset all defauls option?
I apoligize for seeming ignorant in this discussion but i am not grasping this procedure correctly I assume.
Thanks again for your assistance
Bill

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

BPM - Receive Sync/ASync Bridge Problem

Hi,
I am creating a scenario for an inbound Synch request to be serviced by a BPM process.
Here is the problem that I am facing while trying to configure the Receive Step
- I created a Message Interface defined as Abstract Synchronous.
- I created a process model and put in a Receive Step: Mode - Opens S/A Bridge, Synchronous Interface - defined as above.
- I define a container with Abstract type. But when I try to locate the above defined Abstract Synch message interface, I cannot find it.
- As a workaround, I create another Abstract Message Interface defined as Abstract ASynch.
- I create a container with this Abstract ASynch message type.
- I use this container in the Receive Step.
But activating the Business Process gives the error:
Message to be received and Synchronous Interface do not have identical types.
Can someone give me the correct procedure to configure the Sync / ASync Bridge ? thanks,
-Manish

Dan,
This is the link you are looking for?
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm

CS5 Design Premium Installation Adobe Bridge problem

When I try and install CS5 Design Premium it fails because it wants me to close Adobe Bridge (which is not open) and won't let me go any further. I tried uninstalling CS3 but it won't let me because it wants me to close Adobe Bridge.
What Now?

There shoult be a Bridge icon in the system tray (bottom right corner), close Bridge from here and run the uninstaller or if you don't find this icon you can kill process Bridge.exe but this is not always the best way to overcome a problem. I would recommend closing the application from system tray icon.
Thanks,
Tahseen

Photoshop Bridge problem

Bridge opens to Paint or Windows explorer on the first try when opening a photo. Subsequently pictures open to CS4 as they should.Bridge opened to Windows Explorer after Paint disabled. CS3 similarly affected after CS4 installed and CS2 removed.Problem persists.

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Bridge Problem opening files in Photoshop CS6

CS6 Bridge appears to work fine, however when I try to open a file into Photoshop CS6 I get a flag saying it cannot find Photoshop CS4? Any ideas?
TIA Keith

PhotoGene47 wrote:
You can open Bridge and change the file associations in Edit>File Type Associations to change to PS CS6. That is the easiest way. Another way would be to open Control Panel>Programs>Default Programs to change the file association for .jpeg, .psd., .tif, et cetera.
For your info, and others, this does not work in situations were the file associations become corrupted by uninstalling a previous version. The mechanism for corruption is not quite clear to Adobe, but somehow the registry for file associations gets reset to the version that was deleted. Since the normal methods of changing file associations, that you mention, do not affect the registry file in question, the problem still remains. Therefore one needs to wipe files with the Adobe Script Cleaner or go in and change the registry.

Usage of sync-asyn bridge problem in BPM in particular scenario

scenario is to send a Stock availability check from one suboffice to other suboffice which does not involve any R/3 activities.
I need to send SOAP request to XI, BPM receives request through synchronous interface.
BPM has to send request to DB through synchronous interface and gets response
Questions:
1) whether sync-async bridge comes into picture in BPM or not
2) i am really confused how many Data types,Message types and message interfaces i have to create.
3) what are all the message interfaces i have to create
4) abt Integration Directory activities.
Its would be appreciated if u tell step by step.
Its urgent..
Thanks & Regards.,
Pushparaju.B

I have created these things as of now , but problem in interface mapping
Interface Objects
Data Types
1)DT_Soap_request
2)DT_Soap_response
3)DT_Jdbc_request
4)DT_Jdbc_response
corresponding message types
1)MT_Soap_request
2)MT_Soap_response
3)MT_Jdbc_request
4)MT_Jdbc_request_response
Message Interfaces
1)MI_SOAP (inbound asynchronous) MT_Soap_Response and MT_Soap_Request input message
2)MI_JDBC (outbound asynchronous) MT_Jdbc_response output message and MT_Jdbc_request input message
Mapping Objects
Message mappings
1) MM_Jdbc_Response_Soap_Response where MT_Jdbc_request_response and target message is MT_Soap_response
2) MM_Soap_Request_Jdbc_Request where source message is MT_Soap_request and target message is MT_Jdbc_request
Error in interface mapping is
IM_Soap_Request_Jdbc_Request has interfaces source is MI_JDBC and target is MI_SOAP
 No object found for message mapping in request tab
can anyone help me please its urgent.
why its not detecting the message mapping in request tab
Thanks & Regards.,
Pushparaju.B.

Synchronous to Asyncronous Bridge problem

Hi Experts,
I'm working in a RFC->XI->Mail scenario. I have created a BPM that uses the sync to async bridge with 5 steps,
         1 - Receive1:   Opens S/A Bridge
                             Message - Abstract Asyncronous message from RFC
                             Sync Interface - Abstract Synchronous message Output RFC signature
                                                                                Input RFC.response
         2 - Transformation1 Transforms RFC format to XML format
         3 - Transformation 2 Transforms XML to Mail package format
         4 - Send 1: Mode - Asynchronous
                       Message - XML in mail package format
         5 - Send 0: Mode - Closes S/A Bridge
                          Message - Abstract Asynchronous message from RFC.response
All works, the mail is sent, but it fails in the last step, I have a time out error.
What is wrong?
Best Regards,
Alfredo Lagunar.

Hi,
>>I have modified my BPM and eliminated the Sync-Async Bridge. Now I have the problem in the RFC call 'STARTING NEW TASK'.
why starting new task?
just call it like this:
call function
destination XXXX
in background task
nothing more
Regards,
Michal Krawczyk

WRT54Gv3 Wireless bridge Problem

I seem to be having an issue bridging my wireless router. I have high gain antennas installed and recently flashed to DD-WRT firmware. At first, no problem. Wireless and wired both worked. Then Wireless worked and i could get to settings with 192.168.1.1. but wired wasn't connecting. I would get a connection error and 192.168.1.1 did not work.Now, I can connect wired, but no global icon for internet. and wireless comes up with 3 different names on site survey. sometimes its the network name (linksys) , sometimes the name of the router(Midian), and sometimes the name that USED to be the router name (linksys 2). I cannot find "linksys 2" anywhere on the router setup(192.168.1.1), so i do not understand why it only sometimes comes up! Shouldn't i be able to connect to the (bridged) router wirelessly even if i dont have a signal from the main router? I didn't change any settings from when both wireless and wired worked, and now, where i can only connect to the router wired. Wireless disapeared!
Thanks in advance,
DTM

As you have already uploaded the DD-WRT firmware on your Router, and using the Router in a Bridge Mode. To make your Router work in a Bridge Mode, first thing which you need to check the Wireless Settings of your Primary Router. Make sure you have assign a Unique name to the Wireless Network and Set the channel to 11 to avoid any kind of Interference and let the SSID Broadcast should be Enable and the Security Level Which you have setup on your Primary Router.
Then on your WRT54G Router, you need to search for the Wireless Network of your Primary Router and then connect to it using the Security Key which you have set on the 1st Router and make sure that both the Router have a Different IP address. By Default the Linksys Router Default IP address is 192.168.1.1, Make sure both the Router has different IP address.
If your 1st Router IP address is 192.168.1.1 then you need to change the LAN IP of the Linksys Router to 192.168.1.2. These will make your both the Routers to work and the computers connected to the Linksys Router will be able to go Online (Wired / Wireless).

"Waiting on Bridge" problem in Indesign

Just started having this problem after I loaded OSX Maverick on my Imac.
I searched the forums and saw the recommendations for removing the "SwitchBridge" from the preference folder. For some reason, when I go the the Library/preferences/adobe folder, SwitchBridge is not in there. From what I have read, that doesn't always solve the problem anyway.
This problem is driving me nuts because it is intermittent. Some folders open very quickly and some takes 10 to 15 seconds for the thumbnails to pop up. One folder I was trying to open was still spinning after about 30 minutes (I took a lunchbreak). Sometimes I can click on another folder and the thumbnails will show and then go back to the previous folder and the thumbnails pop up immediately.
Mostly it is driving me nuts and slowing me down.
I am running the CC suite of software (mainly Indesign, Photoshop & Illustrator) and I depend heavily on Mini Bridge because it makes my workflow smoother and faster.
Any suggestions?

Never heard of Switch Bridge before, you probably mean SwitchBoard which is in the system library app support folder and in earlier versions has been acting a bit unstable but to my knowledge this is fixed. However, I would not recommend to remove this.
Be sure to run Check Disk and Check and repair permissions on your Mac (which you already should have done also before upgrading to Mavericks) and bite the bullet: dump the Cache folder for Bridge from your user library (Not on Mavericks yet but from 10.7 they have hidden the user library, use menu Go with option to reveal).
Go to the Cache folder:
User / library / Caches/ Adobe/ Bridge CC and inhere move both plug in and cache folder (can grow very large) outside the user library. restart Bridge Holding down option key and choose reset preferences also.
If this is not enough also refresh prefs for ID. You will have to rebuild the cache again ( use main folder and menu view / show items from subfolders and let Bridge do it's job. Depending on amount and size of files this can take a while, best use it overnight or end of the day.
You also will have to reset custom preferences because bot prefs and cache have been reset to empty and new (factory default) settings when restarted Bridge.

Bridge problems

Similar Messages

Maybe you are looking for