Bridge Rotations not Recognized in Photoshop CS5

So i've rotated the images in Bridge...and according to Bridge's metadata the files are being rotated...but when I open them in Photoshop they aren't rotated. Seems as though photoshop isn't recognizing the EXIF data. I'm running it on an iMac and they are both CS5.1. So yeah...if anybody has any suggestions that would be amazing. Thanks!

Worse that being screwed, is not knowing what is wrong so you can't fix it without guessing any maybe not guessing right. Use a new CF card use a card-reader and maybe the situation won't happen, again, is the best you can do going forward.
As far as what to do for the photos from this set, if the card has not been reused completely, again, then you can try recovering the photos off the card, to see if any photos from the batch that doesn't work, remain, and see if they copy off any better the second time. If they do copy off ok, then there is likely something wrong with the transfer process and less likely that it is the CF card.
The software I've used when I've accidentally deleted photos off the card when I shouldn't have, is PhotoRescue from www.DataRescue.com I have one of the older versions so I'm not sure what it corresponds to with the newer set. It costs money, but you can run a scan of the card, first, to see if it finds thumbnails of the images it is going to recover, but you have to pay before you can actually save off the photos it has found.
If you haven't used the card at all since you discovered the problem, meaning you've merely moved the photos off of it and it is now empty, perhaps even formatted, but no low-level formatted, then you have a good chance of being able to recover most of the photos--basically undelete them. If you've shoot more photos over the top of the deleted ones or low-level formatted the card, the chance is lower than you'll be able to get the photos back.

Similar Messages

Why are my plug-ins not recognized by Photoshop CS5?

Hello,
It seems my plug-ins are not recognized at all by Photoshop CS5:
- Imagenomic
- Photokit Sharpener
- Photomatix
and even the - Optional Plug-ins given by Adobe are not working
I get a panel that says:
"could not complete your request because Photoshop doesn't recognize this type of file"
Am I doing something wrong?
The plug-ins are in:
Applications>Adobe Photoshop CS5>Plug-ins>Automate>PK Sharpener
or
Applications>Adobe Photoshop CS5>Plug-ins>Optional Plug-Ins
or
Applications>Adobe Photoshop CS5>Plug-ins>Imagenomic
or
Applications>Adobe Photoshop CS5>Plug-ins>Filters>Tone Mapping
Thanks for your help!
Emilie

sorry I've found the answer... not running in 32 bits... What a shame...

CR2 Files Not Recognized in Photoshop CS5

Hello!
I've been having an issue trying to get a few cr2 files to open in CS5. I have about 800 cr2 files and all will open but about 100. I can't figure out what the issue is with this group of images compared to the rest. They won't open in Bridge or Lightroom 3 either. Any thoughts or ideas on what I could do to remedy this issue?
Thanks for the help! I included a screenprint of the message I receive when trying to open one of the images.
Thanks,
Ashley

Worse that being screwed, is not knowing what is wrong so you can't fix it without guessing any maybe not guessing right. Use a new CF card use a card-reader and maybe the situation won't happen, again, is the best you can do going forward.
As far as what to do for the photos from this set, if the card has not been reused completely, again, then you can try recovering the photos off the card, to see if any photos from the batch that doesn't work, remain, and see if they copy off any better the second time. If they do copy off ok, then there is likely something wrong with the transfer process and less likely that it is the CF card.
The software I've used when I've accidentally deleted photos off the card when I shouldn't have, is PhotoRescue from www.DataRescue.com I have one of the older versions so I'm not sure what it corresponds to with the newer set. It costs money, but you can run a scan of the card, first, to see if it finds thumbnails of the images it is going to recover, but you have to pay before you can actually save off the photos it has found.
If you haven't used the card at all since you discovered the problem, meaning you've merely moved the photos off of it and it is now empty, perhaps even formatted, but no low-level formatted, then you have a good chance of being able to recover most of the photos--basically undelete them. If you've shoot more photos over the top of the deleted ones or low-level formatted the card, the chance is lower than you'll be able to get the photos back.

Why does Bridge CC try to open Photoshop CS5

Double clicking on a RAW file in Bridge CC returns an error message saying that Photoshop CS5 could not be found.
I had both CS6 and CC installed. Double clicking on a RAW file in Bridge CS6 opened Photoshop CS6 (expected). Double clicking on a RAW file in Bridge CC opened Photoshop CC (expected).
I uninstalled everything related to CS6.
Now, double clicking on a RAW file in Bridge CC tries to opened Photoshop CS5!
How do I fix this? How do I get Bridge CC to open raw files in Photoshop CC?
Thanks.

Official answer from Adobe Support: manually map all file types to the desired version of Photoshop. The process is:
1. Go to: Bridge CC Edit | Preferences | File Type Associations
2. Find file type mapped to "photoshop"
3. Right click on the "photoshop" text | Browse
4. Browse to the desired version of Photoshop | select it | Open
Repeat steps 2-4 for all instances of file types mapped to "photoshop." Hint: you can just double click on the desired version of Photoshop in step 4.

After CS6beta install, how to I tell CS5 bridge to open images in Photoshop CS5?

I am not ready to do all of my work in CS6 now, I am just trying to learn the interface. But now I cannot opening anything through bridge or windows explorer using Photoshop CS5 at all. The only way that I can open any image file in CS5 is to do it directly from Photoshop in the file open menu. How can I set Bridge CS5 to at least have Photoshop CS5 as an option, if not the default?

Open Photoshop CS5, and launch Bridge from there (Ctrl Alt o) That will open Bridge CS5, and load images into Photoshop CS5.

Scanner not recognized by Photoshop

Hi there,
I bought a new iMac G5 four days ago only to find Photoshop CS5 was not recognizing the scanner on my two year old Samsung SCX 4500 Printer/Scanner (the printer works fine). I downloaded the most recent Samsung scanner driver (1.0) and Photoshop still doesn't recognize it. Both Preview and Image Capture recognize the scanner which enables me to scan and then upload to Photoshop, but that adds a step I'd rather avoid. Unfortunately it seems that a lot of people are losing printer/scanner compatibility when they upgrade.
Any thoughts on a fix?
thanks
dg

all the components for the mac can be found here:
http://www.ellert.se/twain-sane/
you want to first download libusb as a binary for 10.6
http://www.ellert.se/PKGS/libusb-2009-09-10/10.6/libusb.pkg.tar.gz
and then install it
then download SANE backends as a binary for 10.6
http://www.ellert.se/PKGS/sane-backends-2010-01-17/10.6/sane-backends.pkg.tar.gz
then install
then download TWAIN SANE Interface as a binary for 10.6 and install
http://www.ellert.se/PKGS/TWAIN-SANE-Interface-2.9/10.6/TWAIN-SANE-Interface.pkg .tar.gz
reboot, open photoshop,
you should now have a "sane.." listed as an option as you would your old scanner.

Bridge is not connunicating with Photoshop CS6

I own Photoshops v CS3, CS5.1 and CS6 which I bought as an update.
All versions were installed on my PC and to make moore room on my hard drive I uninstalled CS3 and CS5.
I now find my Bridge CS6 cannot open images. I get the error message 'Windows cannot find C:/Programme Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe The Updater in CS6 has never worked for me - I always get an error message (I did uninstall and re-install CS6 about 3 times when I purchased it but this didn't make any difference to the error messages)

Many thanks for your good advice. Bridge is now communicating with Photoshop - Phew!!! Thanks
I have done as you suggested. I already had a backup copy from when I downloaded CS6 earlier in the year and I have re-installed it. Strangely enough I wasn't prompted for my previous version licence no.
However I am still getting error messages which I thought might have been erradicated with these actions (Extension Manager 6.0.8 Update
Installation failed. Error Code: U44M1P7) and I now find the Text Tool doesn't work!
After re-starting my PC the TEXT Tool is now working! There seems to be a bug in my PC!
I have discovered that the Error Code U44M1P7 relates to Extension Manager - I have no idea what this software is - so maybe I don't need it

My 3D is not working in Photoshop CS5. All of the options are greyed out

Hi,
I just installed the photoshop CS5 but find out my 3D is not working, all of the options are greyed out. I have checked on the openGL menu in preference but still not work. I have core i7 and intel HD graphics 3000 with up to 1760MB dynamic video memory. please help

Is the active document RGB?
Could you please post a screenshot with the pertinent Panels/Menus visible?

Image not displaying correctly Photoshop CS5 Extended V 12.1. (Same file OK in PS Elements)

I am having a problem with Photoshop CS5 Extended V 12.1.
The problem:
When I open some files, some shades of BLUE colour is displayed as BLACK
However the same file opens and displays correctly if I open it using Photoshop Elements V9.0.3.
When I save the file as JPEG and re-open it, the problem returns.
Opening the JPEG file in any other application, including PS Elements, does not cause the problem
Source of files
The original files came from a Nikon camera, saved in RAW format. It is possible that the original files were corrupted in some way as the shots had an unusual blue cast - which was easily resolved by Photoshop when I originally opened the RAW files. However, I'm not sure.
The problem is not universal as I've not been able to reproduce it with any other files (RAW or JPEG).
I have calibrated my monitor display settings sRGB IEC61966-2.1 (default)
Other information:
Adobe Photoshop Version: 12.1
Operating System: Windows 7 64-bitVersion: 6.1 Service Pack 1
System architecture: Intel CPU
Family:6,
Model:10,
Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3395 MHz
Built-in memory: 8153 MB
Free memory: 5089 MB
Memory available to Photoshop: 7147 MB
Memory used by Photoshop: 60 %
Image tile size: 128K

Thank you for yur reply, Curt. Yes, I do have the original RAW file. When I open it in PSE and PS, the colours appear correctly AT FIRST as shown here:
However, when I select "Open Image", it appears as here:
You will see that the blues in the lady's scarf and the wolly hat of a man in the forground are appearing as black. However, when the file is saved as JPEG or PNG and printed or viewed using PSE or Pait, or any other medium (even Premiere Elements), the colurs arer fine.
However, the same process when followed in PSE, does not result in the same outcome. The image displays correctly.

Mini bridge is not available in Photoshop cc 2014

Typically, I have a min bridge icon but after upgrading to CC2014 It is no longer available. I looked inside and out and it is not here. a forum explained to go to WINDOWS>EXTENSIONS> but that is grayed out. please help. I depend on bridge to add layers to photos.
JOHN - MANkind Photo

MiniBridge has been removed from CC2014. No idea if it will return.
Mini Bridge, Kuler, Exchange missing from Photoshop CC 2014
Suggested Workaround: Adobe Mini Bridge Work Around For Photoshop CC 2014 - YouTube

Pen Pressure not working in Photoshop CS5.1

Hello,
I've looked at a lot of questions and answers concerning pen pressure in this forum, and I've tried a lot of things to fix this problem. I have a Genius MousePen 6x8 and use Photoshop CS5.1. It's been a while since I used my tablet, but it used to work before. I rebooted my computer a while ago, so I installed the new driver from the Genius website. The tablet is working fine, even the pen pressure, but for some reason it just won't work in Photoshop. I've tried to fix it by resetting the Photoshop settings by using the Ctrl+Shift+Alt, I've reset the brush tool, I've played around with the brush options and nothing has worked.
Here is the image of the pen pressure working:
And here is the image of the settings for the brush and the pen pressure not working:
Thank you for your time!

Your tablet driver isn't reporting pressure correctly.
The knockoff tablet drivers usually need to be revised for each new version of Photoshop (and we have no idea why).
Contact your tablet maker to see if they have updated drivers to fix their bugs.

Edit: Touchscreen not working with photoshop cs5

When using photoshop cs5, I am unable to use any tool properly when using the touch screen.
Using the touchscreen, I am able to select the tool and other buttons, but when i attempt to draw with the brush tool, dragging a stylus across the screen does not create a line, and only visual feedback is seen. Dots can be drawn, ad the only way a line can be created is to double-click and drag which does not always work and is irritating to use.
Please help, I have tried searching for a long while and even contacted computer support but they directed me here. I am unable to find a suitable driver, as suggested on the troubleshooting page or any other solution. Any advice is greatly appreciated, thanks.
Computer: Asus Vivobook S550CM
System: Windows 8

This have been touch on many times here. There are two api use to support touch type devices like tablets and touch screens. The API that many touch screen tablet and computers use lack features Adobe Pen support uses example the API does not support things like pen tilt. Therefore Adobe does not support this API. You need a device driver for you touch screen that user the API Adobe uses for tablet support.

Extension not appearing in Photoshop CS5

Hi,
I'm not being able to get my simple extension to show up on the window\extensions menu in photoshop CS5.
I'm using Flash Builder 4 CS5, with the CS SDK 1.5, without Extension Builder.
I've tried everything.
The extension runs ok inside Flash Builder when I try to debug with AIR debugger without photoshop.
In the main xml file, I only included a simple function, and have managed to get all the importing right (auto-complete works on the document objects)
I have gone through everything that needed to be done to compile the extension, and it is being loaded ok in the extension manager.
I am using a certificate I created with ADT, according to the documentation:
java -jar ucf.jar -package -storetype PKCS12 -keystore newcert.p12 -storepass 39#wnetx3tl com.example.helloworld.zxp -C "tt" .
(having all files from the output folder copied to a local folder named "tt")
I did all the builer-plate manifest file definition, by the book.
I used the Flex 3.4 SDK libraries, as described in the tutorial.
All can be seen in the attachement.
Here is my main xml file:
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
historyManagementEnabled="false">
<mx:Script>
<![CDATA[
import com.adobe.csawlib.photoshop.Photoshop;
import com.adobe.photoshop.*;
public function run():void
var app:com.adobe.photoshop.Application = Photoshop.app;
var doc:Document = app.documents.add();
doc.selection.selectAll();
var color:RGBColor = new RGBColor();
color.red = 0;
color.green = 0;
color.blue = 255;
doc.selection.fill(color);
]]>
</mx:Script>
<mx:VBox height="100%" width="100%" verticalAlign="middle" horizontalAlign="center">
<mx:Button label="Say Hello" click="run()"/>
</mx:VBox>
</mx:WindowedApplication>
Here is the manifest file:
<?xml version="1.0" encoding="UTF-8"?>
<ExtensionManifest Version="2.0" ExtensionBundleId="com.example.helloworld" ExtensionBundleVersion="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ExtensionList>
<Extension Id="com.example.helloworld.extension1" Version="1.0" />
</ExtensionList>
<ExecutionEnvironment>
<HostList>
<Host Name="PHSP" Version="12" />
</HostList>
<LocaleList>
<Locale Code="All" />
</LocaleList>
<RequiredRuntimeList>
<RequiredRuntime Name="CSXS" Version="2.0" />
</RequiredRuntimeList>
</ExecutionEnvironment>
<DispatchInfoList>
<Extension Id="com.example.helloworld.extension1">
<DispatchInfo >
<Resources>
<SwfPath>HelloWorld.swf</SwfPath>
</Resources>
<Lifecycle>
<AutoVisible>true</AutoVisible>
</Lifecycle>
<UI>
<Type>Panel</Type>
<Menu>Hello World</Menu>
<Geometry>
<Size>
<Height>200</Height>
<Width>200</Width>
</Size>
</Geometry>
</UI>
</DispatchInfo>
</Extension>
</DispatchInfoList>
</ExtensionManifest>
Debug mode didn't work for me for some reason:
I added the registry debug flag (windows 7 64bit) in both the user-key:
HKEY_CURRENT_USER\Software\Adobe\CSXSPreferences\PlayerDebugMode REG_SZ 1
And the local-machine key:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\CSXSPreferences\PlayerDebugMode REG_SZ 1
I tried puting the output files both in the common files folder:
C:\Program Files (x86)\Common Files\Adobe\CS5ServiceManager\extensions\
And the user folder:
C:\Users\arnon\AppData\Roaming\Adobe\CS5ServiceManager\extensions\
Tried debugging both using the AIR debugger and the Web one...
Nothing...
I tried updating the AIR2.0 SDK, as described by overriding the files, both in the Flash CS subfolder, and the CS SDK subfolder, as described.
I tried updating both flash CS and Flash Builder 4 CS5 to their latest patch.
I'm all out of ideas...
Please HELP!

10x,
You saved my ***!
It actually has to include both the PHSP "AND" the PHXS host names for it to work - this is stupid!
If I only use PHXS the extension manager is not able to install the extension, saying it cannot find a host that matches the manifest (even though my photoshop IS the extended variation, so in a sense it's more acurate manifest-wise), and if I only use the PHSP, it IS loaded but doesn't appear in the application!
AND THERE IS NO DOCUMENTATION ON THIS PHENOMENON ANYWHERE!
THIS IS BEYOND IRRESPONSIBLE!
Thank you very much david, but please, as you are an adobe employee, get this message to the right people, if you can.
I know the corporate agenda would probabely be the incentivise people to register to the 1500$ program to get the extension-builder, by keeping the alternative inconvenient, but this issue is beyond inconvenient, it's border-line cruelty!

Windows "Open with..." not working for Photoshop/CS5.5

I use the "Open with..." command in the Windows right-click context menu all the time to open .jpg and other image files in Photoshop. I don't want to directly associate .jpgs, etc, to Photoshop because most of the time I just want to view them quickly in Windows Photo Viewer. But every once in a while, I need to open one in PS, so I had been using the "Open with..." menu command. This worked fine in every version of CS that I've ever used.
Until, all of a sudden, when I installed CS5.5, "Open with..." no longer works. Right-clicking on a .jpg, for instance, doesn't even show Photoshop as a valid option for an application in which to open the file (not in the "Recommended Programs" list or even the "Other Programs" list). So I have to go and browse for an "Additional Program". I'm using Windows 7 64-bit, but whether I choose the photoshop.exe in Program Files or Program Files (x86), the jpg still just opens in the default application (Windows Photo Viewer).
Same for PDFs (opening in either Photoshop or Illustrator).
PSDs open fine, directly, when I double-click the file.
This really seems like a CS issue, since "Open with" still works fine for other non-Adobe applications.
How can I get my "Open with" menu to "see" Photoshop again as a valid option and pass the filename correctly so that it actually opens the file?
Anybody have any ideas?
Thanks much!

Nope. I'd done that many many times, and it never "stuck". No matter how many times I browsed for the exe, whether I checked "Always use the selected program..." or not, the jpg still opened in Photo Viewer.
Turns out, this thread showed up on the "More like this" widget in the righthand of these forums when I had submitted my post, and that answered my question. Why the thread never showed up when I was actually searching for an answer, I'll never know.
As per that thread, you have to go in and manually set/update the registry key
HKEY_CLASSES_ROOT\Applications\Photoshop.exe\shell\open\command
to point to the path of the most recent Photoshop (in my case, C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Photoshop.exe). I guess this is something that the CS5.5 installer fails to do under certain circumstances. It was still pointing to the path of my CS5, which was no longer valid.

The feature "Save as" is not working in Photoshop CS5

Hello, I've downloaded Photoshop CS5 in trial mode but the "feature" "Save as" and "Save" are not working, I can't save my work, is it a restriccion for being in the trial mode?. I'm using Windows XP sp2 with 1.5 Gb RAM, 100 Gb HD and 2.6 Ghz Intell processor. Before the Photoshop CS5 I had installed the CS4 Suite and was working perfectly well. Could you help me with this?.
Thanks
Efraín Escamilla Guido
México City
[email protected]

The trial version is the same as the full version except
for the 30 day limitation.
I think on windows xp you need sp3 for cs5 to work as expected.
Anyway that's what is says here:
http://www.adobe.com/products/photoshop/photoshopextended/systemreqs/
That may not be the problem, but it's a good place to start.
Also it's not a good idea to post your email on the forums.
MTSTUNER

Bridge Rotations not Recognized in Photoshop CS5

Similar Messages

Maybe you are looking for