Bridge screen redraw fails updating (major bug ?)

My bridge window (MacOs10.6.6) is never updating : whatever i do in bridge (select a file, click anywhere), screen stays static. To update the view, i have to move the whole window and hide it out of the screen, or to open menus, or to switch to another application (with a window on top), then the bridge window is redrawn (or refreshed).
Never noticed, but it fails on any version of bridge i have installed here (cs4 cs5 cs5.1).
I tried rebuilding preferences with no success.
It's actually the only apps failing to display (os, master suite... work perfectly well).

Never noticed, but it fails on any version of bridge i have installed here (cs4 cs5 cs5.1).
You are aware that there is also a refresh command for open Bridge window (menu: view/ refresh or shortcut F5 key)
At first I would think it is a cache problem, using the menu tools/cache purge cache for folder might help. You can first try that. But stating it is in all versions the same does not point to that solution.
Each version has its own cache folder and they should not effect each other in the same way as you describe.
Do you have enough free space left on your HD, less then 10 % free (strangely enough for each disk size) is almost certain the fastest way to get in trouble.
Have you already tried to check and repair permissions in OSX (using apple disk utility is a good start, there are other maintenance apps like Cocktail - not free but cheap- to do this on a daily base)

Similar Messages

Screen redraw bug when panning in Loupe view at high magnification

I think I've found a bug in Lightroom.
Using the Loupe view at higher than 1:1 magnification and panning whilst zoomed seems to cause screen redraw artifacts. It is most noticable at high zoom (say 11:1) when panning diagonally. The edges being revealed draw incorrectly. Seems to only happen once the 1:1 preview rendering has been completed, initial panning whilst the preview is being rendered looks fine. Zooming out and back in redraws the screen correctly, but subsequent panning still causes artifacts.
I first thought it must be my graphics drivers, but have updated to the latest available driver (version 7.2 21 Feb 2007) for my ATI Radeon 9800 and the problem remains. I have also tried this on my laptop a Sony VAIO VGN-S3HP (with NVidia GeForce 6200 based graphics) with the same problem. Therefore as this happens on both a NVidia and an ATI card I can't blame my graphics drivers any more.
Can anyone reproduce?
Best regards,
Andrew

I've just seen a similar problem on my DELL laptop. Anything at 2:1 or greater magification gets the jagged edges whilst panning up and down in loupe mode. This makes the compare mode to be worthless as the two images can't be compared as they each suffer different amounts of jaggies.
Windows XP, Intel Mobile 915GM/GMS, 910GML Express Chipset.
I'm going to raise a bug report.

5320 Bugged after failed update...

As said...my phone is bugged after a failed update and its only showing "mode mode nokia" on the screen. Any solution to this?

i got it, i tried on an other PC and now it done.,,.,

Screen redraw issues after update to 10.7.4

Anyone else seeing screen redraw issues since updating to 10.7.4? Suddenly, the zoom tool stops working or causes visual errors.

thank you FFS48, it really helped and might work fine as temporary solution. I was about to restore my OS from backup to 10.7.3 version... as booting from it made no errors. The latest 10.7.4 update filled my log filles with different error messages like:
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PC2C kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PD0R kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PN1R kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PG0C kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
which might be caused by iStatMenus as these log entries are allways next to iStat log entries.
I often need to access my Mac Pro using Back to my Mac from my MBP. Do you know will it still be possible having WiFi on MacPro off?
It is strange, that the latest update delivered more visible problems than benefits....
What I tried to solve the problem and that did not work:
- Disable WiFi sync on iTunes (after reading some forums discussing similar problem)
- Uninstalled Xcode (as some forums suggested)
It is some how related to WiFi and iOS devices that sync to that computer. Switching these iOS devices off - removes the problem, and I believe it should be reported to Apple.
Is there any URL to Apple bug submit form?

My new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.

Premiere Pro CC, Quadro 4000 and Screen Redraw bugs

Not sure if it's just the 7.1 update, but i think i started seeing it in the previous version.
When i start using transitions then my main UI screen redraw messes up. So for example pop a wipe onto some footage then the timeline bar doesn't move when playing and i cannot click the sequence footage elements. I can play in the monitor. If i guess where the close box is for the sequence and open the sequence again it redraws correctly.
I've updated the drivers to the latest versions and also confirmed on a different PC that the problem isn't there. So it's unique to my set up.
I'm running on Win 7 x64, 32GB. About the only recent change to my system was a 10Gbe card but i've duplicated the problem just with local drives.
In fact it's as simple as if i start up CC then click the project tab, media browser tab, info tab, effects tab the search box in the effects tab doesn't redraw fully.
Any ideas what could be causing this?
(I do have a decklink extreme in there but have got the output turned off at the moment - tried it on and off- same problem)
I really don't remember this happening in the past but it was the transitions that revealed it, and i don't normally use them.
Help!
cheers
Paul

Thanks for the update,
The question is how long for because i'm sure that my installation was fine, then stopped working. If you drag a transition onto the timeline does the time line still update, can you grab the timeline cursor and drag it back and forth.
We're not alone, there's another thread with what looks like the same issues
cheers
Paul

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

I have PSE 9 & CS5.5 & Bridge & they all fail to update

I have PSE 9 & CS5.5 & Bridge & they all fail to update on Windows 7. They have all just been reinstalled on a rebuilt machine .Can any one help as Adobe just cut me off mid sentance
thanks
Nick

You'll probably have to find, download and install the updates yourself.
Product updates
Adobe - Photoshop Elements : For Windows
Adobe - Creative Suite : For Windows

Bridge 1.0.4 update fails on Leopard (Intel mac)

Howdy! I just installed Photoshop CS2 on a new Macbook Pro running Leopard, and then downloaded the Bridge 1.0.3 and 1.0.4 updates. The 1.0.3 update appears to install correctly, and when I bring up Bridge it says it's 1.0.3. But the 1.0.4 update won't install, claiming that 1.0.3 isn't installed.
Any ideas? (Other than the obvious one of upgrading to CS3?)
Bridge is fully updated to 1.0.4 on my old Powerbook; can I reasonably drag the Bridge application over to the new laptop and get 1.0.4 that way?

I had a similar problem updating PSE 4.0.1. You might get it to work if you open the Bridge Plug Ins file and instal the Adobe 4.3.1 Adobe Camera Raw file in it. Then try to run the Bridge 1.0.4 Update, downloaded from the Adobe website, not from within Bridge. Good Luck
P.S.No one at Adobe could explain the problems I was having with my update, but I did get it to work in 10.5.2.

Two major bugs in Lion - Zoom and Safari auto fill search bar

hey there
every since I updated to Lion I've been experiencing two major bugs... zoom randomly stops working (the one where you press control and zoom in and out) even though it's set to work on the settings. Safari is also experincing a problem concerning the search bar. mine is set to google and whilst on full screen mode, it randomly stops auto filling as opposed to what happens in non full screen mode. I actually need to get off full scren mode and go back to it to make it work again. as to the zoom thing, I need to restart my computer everytime is stops working. any ideas ? thanx !!

You don't need to restart. Quit Safari or logout and back in.

Major bug with iCloud restore and the multitasking menu that compromises privacy.

Hello there,
I very rarely post on these forums but I’ve discovered what I think is a pretty serious bug. I’ve already sent this as feedback to apple but id be interested to know if anybody else is able to re-create it or has already stumbled across the problem.
I have been able to recreate this problem twice by creating an icloud backup on an iPhone 6 (iOS 8.0) and restoring to an iphone 6 (iOS 8.0).
The problem has to do with the multitasking snapshots that appear after double clicking the home button. On the iPhone it is my understanding that there can be up to 3 ‘different’ snapshots based on when the home button is double clicked and the orientation of an app:
a) The first is when you have an app open in portrait mode and then close it or click the home button to exit. Double clicking the home button from the home screen will then display the multitasking menu including a portrait snapshot of what was last seen in that app.
b) The next is when you're in an app that supports landscape mode and double click the home button whilst ‘in app.’ This displays a multitasking menu with landscape snapshots showing what was last seen when apps were open in landscape (note that if apps can only be shown in portrait than this is the image that will be shown and it will appear sideways).
c) Finally, there is the case when you have an app open in landscape and then directly close it or press the home button, and then double press the home button. This displays a multitasking menu with portrait snapshots; however, to my knowledge these snapshots never change (they will not show the last snapshot from when the app was last open in portrait mode).
The bug is that after restoring from iCloud, the snapshot as described in ‘C’ scenario gets set to whatever was in the icloud backup for scenario ‘A.’ Because this snapshot cannot be changed it is a major bug if for instance you have personal information in the snapshot. In my case, I have my bank statement permanently appear in the snapshot for scenario C.
What’s more, if I have safari is in landscape and then close it; then at some point I open the multitasking bar before opening safari again in portrait mode; then the snapshot flashes up in the actual app for around 1-2 second before disappearing.
At the moment the only solution I can see is to setup my iPhone as new but this will be a major hassle and lose all my settings etc.
Finally, it’s worth mentioning that I think this is a bug across all ios devices with multitasking; however, with the ipads there is an easy solution because you are able to orientate the home screen in multiple ways. This means its possible to update the snapshots in a way that you can’t do on the iPhone because the home screen is locked to portrait.

so to clarify, it appears that the multitasking snapshot for the following scenario will not update: open safari and turn to landscape, exit safari using home button or multitasking bar, then double press home button. That snapshot that appears for safari doesn't ever seem to refresh. Whatever is there is stuck there and whats more it will always pop up in the actual browser for 1-2 secs the next time safari is opened after completing those steps. Im not sure when the snapshot is initially created - it must be the first ever time you close safari but as I said in my post, it also appears to be stored in iCloud backups. So I've tried:
a) hard resetting
b) clearing safari cache and history
c) resetting all settings
d) restoring from iCloud (as mentioned)
e) opening and closing closing safari using the multitasking menu (both the landscape multitasking menu that appears when you're actually in safari in landscape mode, and the multitasking menu that appear when you double press the home button on the home screen).
f) same as above except closing all tbs open in safari before then exiting.

My Sony Xperia Z won't start /turn on after failed update attempt

Try this connect your phone to the wall charger > press andhold power & volume up > let it charge for 1 or 2 hours > after 2 hours > repair your phone with SUS Update Service (SUS) http://www.sonymobile.com/gb/tools/update-service/ http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

A similar problem to the other posters, my Sony Xperia Z won't start after a failed update attempt. Following the support suggestions on the Sony website (http://www.sonymobile.com/sg/support/faq/w8-walkman-phone/update-software/software-update-failed-ps101/) failed. Solutions posted on this forum thread (http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/My-Sony-Xperia-Z-won-t-start-turn-on-after-failed-update-attempt/m-p/401787#M20133) have also failed. When I plug the phone into the wall charger, the LED comes on red, the SONY logo appears on my screen, followed by a message indicating that "The Software update failed. Make sure that your phone is connected to the computer and try again.", and then the phone turns itself off. The cycle repeats itself with no indication that my phone's actually being charged. Since it is unable to charge, plugging the phone into my computer does not trigger the update process to start, so I can't "try again", as the message so helpfully suggests. The computer also does not recognise my phone as being connected despite following the PC Companion's instructions to 1) unplug the device, 2) remove and replace the battery (which I can't do, because the battery is built in), and 3) turn it back on (which, again, I can't do, because the phone won't charge in the first place), before 4) plugging it back into the computer. Please help... Thank you.

PSE8 for Mac: Convert to DNG in Bridge Photo Downloader fails

Using PSE8 for Mac. When I get RAW photos from Bridge and specify "Convert to DNG" in the advanced options of the Photo Downloader, the RAW files download but the conversion to DNG fails for every image. I can successfully convert using the standalone DNG Converter, but I would like to use the option in the Photo Downloader that comes with Bridge. I'm in touch with Adobe Support on this but not having a lot of luck. Has anyone had this problem or know what to do?
Also, I cannot see the RAW images either in the Photo Downloader or in Bridge. They show up as blue squares with a flower graphic on them in the Downloader, and as white squares in Bridge. I can only see images once I open them in Elements. Is this normal?

Also, I cannot see the RAW images either in the Photo Downloader or in Bridge.
This is the source of your problem. You need to update the raw converter in bridge, which ships with a very old version (5.0). In bridge, go to help>updates and let it do its thing.

Mac Pro 2007 with Nvidia 8800GT screen redraw problems on Mac OS 10.5.2

I seem to be having a slight screen redraw problem. Such as when grabbing the browser window and moving up and down it seems the redraw can't keep up,also seems problematic when watching flash or other video online. It does it in the finder too for windows listings or in icon view there is a fluttering or flashing back and forth, kind of like a white super split second flash when dragging the window box smaller or larger not as bad as when making smaller. Hard to describe but my original Ge-force that I pulled was not having these characteristics. I figure that the drivers need tweaking. In windows I am not getting these results. I have newer boot camp installed as well as the leopard graphics update done so I am trying to see if others are having a slight problem or maybe it is me.
Also I make certain it is not heat related as I monitor that and it does not matter at what temp it is.

Here's another similar experience -- and my solution.
I bought a Quad-core 2.8GHz (8GB RAM) Mac Pro in May and got the "better" Nvidia 8800GT. I thought I was happy, but there were redraw issues after sleeping and a display "roughness" I found annoying. Upgrading to OSX 10.5.4 didn't help.
I found it to be mostly absent on startup, but sleeping the Mac would bring it on. I.e., after sleep, the relatiionship between the 8800GT would be different than before. when I logged out and in again, the problem woud vanish. No what I expect from a "superior" graphics card. I ascribed it to funky drivers from Apple.
The store I bought the Mac from offered to swap for my suggestion of an ATI HD 3870, so I went for it about a week ago.
This card is far smoother than the 8800GT and just as fast in rendering benchmerks for graphics. (I'm not a gamer.) I am a happy camper! There is no stuttering, oddball redraw, or jerkiness as there had been with the 8800. It's perfect! Never mind that it may be 5% slower for gamers, it feels faster for my use.
BUT NOTE: As I now see from reading several forums, I wasn't alone is getting a screaming-Mimi at first! The first 3870 ran at nearly full fan speed at power-up. The speed changed a little with resolution changes on my big Mitsubishi CRT monitor, and actually stopped when I switched to 1080x1920 @ 72Hz! Then the fan would start and quit, start and quit randomly -- convincing me it was defective.
I returned this RED-shrouded unit and the store replaced it, this time with (randomly) a BLUE-shrouded unit. (Slightly lower serial.)
Bottom Line: This replacement 3870 is quiet as a mouse! Fan runs near-silently at startup and after hours of regular use in a 75ºF room. I get the distinct feeling that a bunch of cards with wonky fan controllers were built, and some of us got 'em.
Bad News: The ATI HD 3870 does NOT support multiple refresh rates under Windows XP-SP2 booting the Mac Pro, with or without Boot Camp drivers installed. No version of the ATI drivers fixes this, and ATI does not officially support Boot Camp yet. You can choose a resolution okay, but you're stuck at 60Hz refresh -- a pain for those of us who hate 60Hz flicker. (I like 100Hz refresh.)

Weird screen redraws

hi folks.
mac newbie here...so please be kind!
anyhow, whenever I'm recording an audio track, and the screen pages to the next screen after a scroll, I ALWAYS get leftovers on the screen from the previous page (weird waveform bits and things).
is there some setting in the Mac that I need to change so my Logic screen redraws are clean? and not have little bits of graphics everywhere?
thanks!!
cheers
rich

Is this only during recording? If so I can comfort you. Logic until today cannot draw the waveform perfect in realtime during recording and this sometimes looks strange. I would call it an adumbration of the waveform. When the recording is finished usually you get a clear picture.
It will be changed in the 2013 update, as far as I know
Eddie

Bridge screen redraw fails updating (major bug ?)

Similar Messages

Maybe you are looking for