Bridge Search Help

I recently keyworded thousands of pictures and am having a little trouble narrowing down the searches. When I search by keyword it shows me all the pictures that have that keyword assigned to it. For example: sunny, student, teacher. Rather than it showing me every picture that has sunny, student, teacher, I am trying to get it to show me the pictures that have all three keywords to that one image.
Any suggestions would be appreciated

Any suggestions would be appreciated
You could use the specified find command (Cmd+F or menu Edit/find) and from
this menu choose keywords and add the next by using the plus sign for the
combined search and make a choice for the criteria method in the bottom
section from this menu.
An other option is to use the filter panel when you have found the files
containing one of those words you can narrow it down by selecting all the 3
mentioned criteria, in this way Bridge content window only shows the ones
that meet all three filter criteria

Similar Messages

Problem with Bridge search

Am I doing something wrong?
I title my folders with model names.
I put names, first, last, nothing works, no folders come up with Bridge search. help. thanks!

no folders come up with Bridge search.
Using both the search field top right in Bridge window and the Find Command under edit does give me the folder I searched for, so it should work.

Bridge Cache Help

I'm working with Adobe Bridge CS5 on a network of two Mac computers. There is roughly 200,000 images stored on an external database, which is a cloud based hard drive connected through ethernet, (it is not directly connected to either of the Macs). There are a couple of things I am looking to accomplish:
1.) Using Bridge on both Macs to attach keywords to images.
- I want the keywords that are updated from one computer to be updated to the other computer automatically and vice versa. (I know I can do it manually by building a cache for the newly keyworded image folders).
2.) Using an external cache folder on the cloud hard drive (where the images are located) to be the primary cache folder, instead of the default cache folder found on the local drive under "Library/Cache/Adobe/Bridge CS5"
- Every time I set up the cache preference in Bridge Preferences to be on the external drive, it tells me that the cache folder has to be local and reverts it back to the location mentioned above.
The short version of what I am attempting to accomplish is:
- Speeding up Bridge searches (bringing back the most up to date results for both the Macs).
- Forcing the cache folder to live on the external drive, rather than the local drive. Using that external cache folder for searches, rather than the local one.
I have researched throughout Adobe Help and not able to find a solution to this specific request. Many people tell me it's possible, however they can't explain how to make it work properly and consistently.
Is what I want to do even possible? Or would an entire separate infrastructure need to be developed.
If Bridge is not the answer, then does anyone suggest another application?
Thanks in advance for all the help.

I agree with Curt about Bridge as DAM.
And having it working over a network is a very difficult task. There is one guy that succeeded but with great discipline, he calls himself the Digital Photo Archivist and has a blog that might get you on the right track:
http://imagearchivist.blogspot.nl
However having to deal with such a great number of content I really would suggest to use a dedicated DAM application for this. Bridge is sadly enough not thrustful in handling cache over different versions, each version up to CS6 has a different Cache set up and you need to recache the lot.
I do like Bridge for importing and handling files up to the process they are ready, for this it does a marvelous task but then I switch to Canto Cumulus.
As a small business owner and a stand alone computer set up I can manage with the fairly expensive Single user version (around 300 Euro / 400 US dollar) and I bought it from the Australian based DataBasics.
Including the delay of Time Zone they also offer quick and great support:
http://www.databasics.com.au/csu8.html#content-tab-1-2-tab
I think the single user version might not be enough for you and maybe you need its big brother that runs over a network and has many more options but that also comes with a price (to be asked for, depending on your situation). However searching in Canto is lightning fast as is cataloging.

Search Help with Web Dynpro call on another system

Hi all,
I have to create a search help with web dynpro on a field but the database is on another system... How can I do?
Many Thanks in advance...

I would use a search help exit. Nothing WDA specific here, as this has been possible long before WDA came around. With a search help exit you define the search help like normal, but instead of database table or view being the source of selection, you have a function module. Within the coding of this function module you can call an RFC to read data from another system or call a web service if you need to bridge over to something that isn't ABAP based.
You can read more about Search Help Exits here:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm

Search Help with Web Dynpro

Hi all,
I have to create a search help with web dynpro on a field but the database is on another system... How can I do?
Many Thanks in advance...

I would use a search help exit. Nothing WDA specific here, as this has been possible long before WDA came around. With a search help exit you define the search help like normal, but instead of database table or view being the source of selection, you have a function module. Within the coding of this function module you can call an RFC to read data from another system or call a web service if you need to bridge over to something that isn't ABAP based.
You can read more about Search Help Exits here:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm

F4 search help is not getting displayed in WAD

Hi all,
For a certain InfoObject we want to add an attribute in the F4-search help. The additional attribute does appear when executing the query in the Bex Analyzer but not on the Web. Can anyone tell me how to achieve this in WAD?
Thanks in Advance

Hi all,
For a certain InfoObject we want to add an attribute in the F4-search help. The additional attribute does appear when executing the query in the Bex Analyzer but not on the Web. Can anyone tell me how to achieve this in WAD?
Thanks in Advance

Issue in custom search help for Suggest Value

Hi,
I have a requirement to have the suggest values pick up the records form any par of the string. Basically, using pattern. I have written the code in search help exit and it work in some cases and doesnt work for others.Eg. The result shows up for 123 but doesnt show for 1234, even though 1234 exists and it had showed up when i keyed in 123.
My select quest works fine and i can see the values in record tab but on the screen. What could be going wrong.
Thanks in advance for your help.
Pris.
PS: the code:
IF callcontrol-step = 'SELECT'.
    DATA:lwa_selopt TYPE ddshselopt,
         lit_selopt_id TYPE RANGE OF yselxyz-builder_id,
         lwa_selopt_id LIKE LINE OF lit_selopt_id ,
         lit_selopt_desc TYPE RANGE OF yselxyz-builder_name,
         lwa_selopt_desc LIKE LINE OF lit_selopt_desc,
         lwa_header TYPE yselabc,
         lit_header TYPE STANDARD TABLE OF yselabc,
         lv_sel_val TYPE ddshselopt-low.
    READ TABLE shlp-selopt INTO lwa_selopt WITH KEY shlpfield = 'BUILDER_ID'."'DKEY'.
    IF sy-subrc EQ 0.
      lwa_selopt-option = 'CP'.
      CONCATENATE '*' lwa_selopt-low INTO lwa_selopt-low.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_id.
      APPEND lwa_selopt_id TO lit_selopt_id.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_desc.
      APPEND lwa_selopt_desc TO lit_selopt_desc.
      CLEAR:lit_header[],record_tab[].
      SELECT builder_id builder_name FROM yselxyz INTO TABLE lit_header
        WHERE ( builder_id IN lit_selopt_id )
       OR ( builder_name IN lit_selopt_desc ).
      SORT lit_header BY builder_id.
      DELETE ADJACENT DUPLICATES FROM lit_header COMPARING builder_id.
      CALL FUNCTION 'F4UT_RESULTS_MAP'
        EXPORTING
          source_structure = 'YSELABC'
        TABLES
          shlp_tab          = shlp_tab
          record_tab        = record_tab
          source_tab        = lit_header
        CHANGING
          shlp              = shlp
          callcontrol       = callcontrol
        EXCEPTIONS
          illegal_structure = 1
          OTHERS            = 2.
      callcontrol-step = 'DISP'.
      EXIT.
    ENDIF.
ENDIF.

Issue Resolved. For less than 50 records, client side filtering takes over. In that case the search help exit will not come into picture. Issue resolved by avoiding client side rendering.
callcontrol-maxexceed = 'X'.
Thanks,
Pris.

How to populate data in MPP through F4 search help(the field should get filtered as per key)

Dear Experts.
I am new to ABAP and hence trying jmy hands on various ways of peforming a task.
I have a requirement. I want to maintain a database tables through MPP : ZLT_Auftrag (Refer Screen Shot 1: Doubt MPP1) and ZLT_Kunde (Refer Screen Shot2: Doubt MPP2)
The fields of ZLT_Kunde are: K1, K2, K3
The fields of ZLT_Auftrag are: A1, A2, A3, A4, P1 P2 and P3 are related as per the key field "A3"   (Here A3 = K2)
I want the User to be able to Maintain this table through the Screen that I had created using MPP. (Plz refer the attached Screen Shot3:Doubt MPP3 of the SCREEN in MPP)
When I populate the Kunde name(K1) in the SCREEN (Can be done by F4 Search help), then on hitting the pushbutton "Get Kunde" the kunde Code (K2) appears . Now from here it can be deleted or even a new Kunde name and code can be saved dirctly to the database table : ZLT_Kunde. (Refer Screen Shoot4: Doubt MPP4)
For Example for Kunde (K1)= BASF, Kunde Code (K2) = BSF, the Auftrag should be all those values from ZLT_Auftrag (where A3 = BSF)
When I try to populate the Auftrag value on the SCREEN then on hitting F4 (already created for table ZLT_Auftrag in se11) then I get all the values of Auftrag (A1) from the table ZLT_Auftrag. (Ply refer Screen Shot 5: Doubt MPP5)
MY REQUIREMENT: Here I want that either through F4 help or through drop down ONLY those values of Auftrag-A1 should appear on the SCREEN which satisfies the condition: A3 = K2
I am unbale to get how to do that.
I need your valuable suggstions.
Regards
Chandan

And the code of the MPP is:
*& Module Pool       SAPMZDEMO_MPOOL_03
PROGRAM SAPMZDEMO_MPOOL_03.
TABLES: ZLT_MITA, ZLT_Kunde, ZLT_Auftrag, Zlt_Stdsatz.
DATA: flg_lock TYPE c,
*      indx TYPE i,
*      indxk TYPE i,
*      indxa TYPE i,
*      TCNT TYPE sy-tabix,
      lv_msgv1 TYPE sy-msgv1.
*DATA: it_mita    TYPE TABLE OF ZLT_mita,
*      it_kunde   TYPE TABLE OF ZLT_KUNDE,
*      it_auftrag TYPE TABLE OF ZLT_AUFTRAG.
*&      Module STATUS_9000 OUTPUT
*       text
module STATUS_9000 output.
SET PF-STATUS 'ZSTATUS01'.
* SET TITLEBAR 'xxx'.
If flg_lock is Not initial.
    LOOP at Screen.
If screen-group1 = 'G1'.
Screen-input = 0.
MODIFY SCREEN.
       Endif.
    ENDLOOP.
      MESSAGE s000(8i) WITH 'Mitarbeiter already locked by user' lv_msgv1.
ENDIF.
endmodule.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
*       text
module USER_COMMAND_9000 input.
*To Populate Data into Mitarbeiter through Pushbuttons
CASE sy-ucomm.
    When 'OK_GET'.
      Clear : flg_lock.
        IF ZLT_MITA-M1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
*To create a Lock Object so that when two or more employees are accessing the same data
* at the same time then for the new user the data gets locked and only can been seen in
*display mode
        IF sy-subrc = 0.
        CALL FUNCTION 'ENQUEUE_EZLT_MITALOCK'
         EXPORTING
           MODE_ZLT_MITA        = 'E'
           MANDT                = SY-MANDT
           M1                   = ZLT_MITA-M1
*           X_M1                 = ' '
*           _SCOPE               = '2'
*           _WAIT                = ' '
*           _COLLECT             = ' '
         EXCEPTIONS
           FOREIGN_LOCK         = 1
           SYSTEM_FAILURE       = 2
           OTHERS               = 3
        IF sy-subrc <> 0.
          flg_lock = 'X'.
          lv_msgv1 = sy-msgv1.
        ENDIF.
        ENDIF.
        ELSE.
            MESSAGE S000(8i) With 'Enter Mitarbeiter Name'.
        ENDIF.
    When 'OK_SAVE'.
       Modify ZLT_MITA.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETE'.
        IF ZLT_MITA-M1 is NOT INITIAL.
            DELETE
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*     When 'OK_FIRST'.
*           indx = 1.
*     When 'OK_NEXT'.
*           indx = indx + 1.
*     When 'OK_PREV'.
*           indx = indx - 1.
*     When 'OK_LAST'.
*           Describe Table it_mita lines indx.
*To Populate Data into Kunde through Pushbuttons
    When 'OK_GETK'.
        IF ZLT_Kunde-K1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Kunde
            Where K1 = ZLT_KUNDE-K1.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEK'.
       Modify ZLT_Kunde.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEK'.
        IF ZLT_KUNDE-K1 is NOT INITIAL.
            DELETE
            FROM ZLT_KUNDE
            Where K1 = ZLT_KUNDE-K1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Auftrag Through Pushbuttons
    When 'OK_GETA'.
        IF ZLT_KUnde-K2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEA'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEA'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Position Thorugh Pushbuttons
    When 'OK_GETP'.
        IF ZLT_Auftrag-A2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEP'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEP'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
    When 'OK_EXIT'.
       Leave Program.
    When 'OK_CLEAR'.
      Clear : ZLT_MITA, ZLT_KUNDE, ZLT_AUFTRAG.
*              it_mita, it_kunde, it_auftrag,
      CALL FUNCTION 'DEQUEUE_EZLT_MITALOCK'
       EXPORTING
         MODE_ZLT_MITA       = 'E'
         MANDT               = SY-MANDT
         M1                  = ZLT_MITA-M1
*         X_M1                = ' '
*         _SCOPE              = '3'
*         _SYNCHRON           = ' '
*         _COLLECT            = ' '
ENDCASE.
endmodule.                 " USER_COMMAND_9000 INPUT
*&      Module user_cmd_9000 INPUT
*       text
module user_cmd_9000 input.
If sy-ucomm = 'OK_CANCEL'.
LEAVE PROGRAM.
ENDIF.
IF sy-ucomm = 'OK_EXIT'.
      LEAVE PROGRAM.
ENDIF.
endmodule.                 " user_cmd_9000 INPUT

F4_FILENAME in search help in screen painter

Hello gurus,
I want to design a screen in which the text input field is used to get file name. For that i need to enable file search in local folders and drives with f4 key press. I wish to use the functionality of function module 'F4_FILENAME" in screen painter. How can i do that?
I tried creating search help for RLGRAP structure. It compiles fine but gives the message 'No inout for selection'.
What should i do?

Thank you all,
The problem has been solved.
I am posting the final code.
1. In se38, i created program zprogram.
2. In se51, i created a screen for the program zprogram.
3. In layout, i took 2 buttons and one input/output field.
1st button for import and 2nd button for exit.
4.In flow logic-
i wrote the follwing code.
PROCESS BEFORE OUTPUT.
MODULE STATUS_100.
PROCESS AFTER INPUT.
PROCESS ON VALUE-REQUEST.
FIELD FILENAME1 MODULE F4_FILE_SEARCH.
5. IN THE MAIN PROGRAM
i wrote the following code-
REPORT ZPROGRAM.
DATA: FILENAME1 TYPE RLGRAP-FILENAME,
           OK_CODE TYPE SY-UCOMM.
CALL SCREEN 100.
MODULE F4_FILE_SEARCH INPUT.
OK_CODE = SY-UCOMM.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
    FIELD_NAME         = 'FILENAME1'
IMPORTING
    FILE_NAME           = FILENAME1
ENDMODULE.
MODULE STATUS_100 OUTPUT.
CASE OK_CODE.
WHEN 'IMPORT'.
MESSAGE 'THE FILE IS RECIEVED' TYPE 'I'.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
I REFERRED TO THE DEMO PROGRAM MENTIONED
IN OTHER POST
NAME OF THE DEMO PROGRAM IS - DEMO_DYNPRO_F4_HELP_MODULE

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Question on Search Help and Authorization Check for Sales Order Type

Question 1:
When I go to VA01 and click the search help, it shows only order type that are not blocked.
However, when I have sales order type in select-options of a Z program,
S_AUART FOR VBAK-AUART
I click on the search help, it gives all the sales order types. How can I have a list with unblocked sales order type only?
Question 2:
I want to check whether a use can extract data from a sales order type (e.g. OR and RE)that he/she authorized to use.
I have include the following in my program:
AUTHORITY-CHECK OBJECT 'AUART'
ID 'AUART' FIELD 'OR'.
It always returns SY-SUBRC = 12.
But order type 'OR' is granted to the user (he/she can create order with type OR in VA01)
Please kindly give me some ideas, thanks.

hi,
ad1
use following code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR auart.
PERFORM auartGet.
FORM auartGet.
    CALL FUNCTION 'RV_HELP'
         EXPORTING
              KEY            = VKORG
              KEY2           = VTWEG
              KEY3           = SPART
              KEY4           = '0'
              NUMBER         = '008'
              FIELD_IN       = AUART
         IMPORTING
              FIELD          = AUART.
ENDFORM.
ad2.
example:
   AUTHORITY-CHECK OBJECT 'V_VBAK_AAT'
         ID 'AUART' FIELD 'OR'
         ID 'ACTVT' FIELD '01'. "01-create order, 02-change, 03 display
check sy-subrc eq 0.
regards,darek

Search Help Not show/display the data

Dear All,
              I have created a search help whith mannual itab of 4 entries. Itab is filled correctly, but when i see in the screen field it show the search help and display no record with the message 4 entries found; but I can't see the data.
pls. guide me what can be the problem
Thanks and Regards,
Sohail

Hi,
If you want to Show the Search help for Particular Field in Screen painter , You must give the Code In PROCESS ON VALUE REQUEST(POV).
ie.
process on value-request.
field P9611-REQ_STATUS module GET_REQ_STATUS.
and in Program Give the internal table Fieldname in Capital Letter while Passing in Fuctional Module.
like.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'REQ_STATUS2'    "internal table field
      dynpprog        = sy-dynnr
      dynpnr          = sy-dynnr
      dynprofield     = 'P9611-REQ_STATUS' "screen field name
      value_org       = 'S'
    TABLES
      value_tab       = req_status_tab "internal table
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards
Kesavaperumal

Not able to get the data in custom search help.

Hi ,
sorry was not aware of how to post a new thread.
I am working on web UI and i need help asap.
I want f4 help whose value depends on the other fields drop down.somhow i managed to get the values in local table and passed it to static attribute of the z class ZL_CRM_UIU_ZZORDERADM_H0201_G.
in this z class i have redefined a method IF_BSP_WD_CUSTOM_F4_CALLBACK~RETRIEVE_CUSTOM_VALUES.
which returns a table CT_RESULTS_TAB of type as f4.i have taken key n values in this table too.but the below code should populate the value in the field.but m not getting the values.
move 'STRUCT.ZZORDERADM_H0201' to ls_map-context_attr.    "#EC NOTEXT
condense ls_map-context_attr no-gaps.
ls_map-f4_attr = 'KEY'.
append ls_map to: lt_outmap.
lr_entity ?= me->collection_wrapper->get_current( ).
if lr_entity is bound.
    move 'STRUCT.ZZORDERADM_H0201' to lv_controller_key.
    call method cl_bsp_wd_reference_tool=>set_reference
      exporting
        iv_remove_existing = abap_true
        iv_controller_key = lv_controller_key
        iv_controller_ref = lr_entity.
    concatenate '\''' lv_controller_key '\''' into ls_map-context_attr.
     ls_map-f4_attr = if_bsp_wd_custom_f4_callback=>gc_key_ref.
    append ls_map to lt_inmap.
endif.
create object rv_valuehelp_descriptor
    type
      cl_bsp_wd_valuehelp_f4descr
    exporting
      iv_help_id                  = '(ZL_CRM_UIU_ZZORDERADM_H0201_G)'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap
      iv_trigger_submit           = abap_true.
can you please help me??

To Implement Search help for UI field same GET_V method need to implement, no need to implement GET_P method.
Initially we must have one search help in SE11
DATA:
lv_index TYPE string,
ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
lv_index = iv_index.
ls_map-context_attr ='STRUCT.YYSURVEY_ID' .               "#EC NOTEXT
ls_map-f4_attr = 'SURVEYID'.                              "#EC NOTEXT
APPEND ls_map TO: lt_inmap,lt_outmap.
ls_map-context_attr = '\''BUS2000116\''' ."#EC NOTEXT
ls_map-f4_attr = 'object_type'.                               "#EC NOTEXT
APPEND ls_map TO: lt_inmap.
CREATE OBJECT rv_valuehelp_descriptor
TYPE
cl_bsp_wd_valuehelp_f4descr
EXPORTING
iv_help_id                  = 'CRM_SURVEY_ID'      'SE111 search help name
iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
iv_input_mapping            = lt_inmap
iv_output_mapping           = lt_outmap.

SY-TABIX within a search help exit...

Hallo all,
I tried to find an answer in earlier postst, but did not succeed, therefore this message.
I have built a customtabel with several columns. For one of the columns I have built a custom search help, including some coding in the search help exit. In this coding I want to do a different selection based on the value in another column (BUKRS) of the same table. Do you understand what I mean?
The trick is to retrieve the right value of in the column BUKRS in the same line of the table, at the moment I am pushing F4 for another column.
And I dont know how to do this. I dont have the right SY-TABIX value, so this is not helping.
Does anybody have an idea as how to tackle this?
Kind regards,
Erik

Hello Francois & Holger,
Thanks for the reply, but Iu2019m calling this searh help from the transaction SE16 itself, so I donu2019t have my own table control. I am also using the search help in another situation (from a custom-made screen) and here I can pass on the value via a parameter, but this is not working in the case I described.
So the SY-STEPL is not working too....
Kind regards,
Erik

Search Help not getting displayed

Hi ,
I have included my own Search Help ZSH to Standard Search Help MAT1 which is related to field MATNR , in the following path..
In MAT1->MAT1_A, I have INCLUDED my Search Help.
I have tested it in SE11, it's working fine.
But, in VA01 screen when I press F4 on the MATNR field only 9 Search Helps are displayed, and my Z-Search Help is not getting displayed.
What additional settings should I do for the display of my Z-Search Help?
Thanks in advance,
Shivaa...

Also look at this thread Search help enhancement - VA01
Regards,
Raymond

Bridge Search Help

Similar Messages

Maybe you are looking for