Bridge showing tiff photos in greyscale.

In CS5 Bridge shows Jpeg photos in color and Tiff photos in greyscale. How do I correct this
raspurr

Bridge is just a file browser so they just show what is there.
If you open in Photoshop are they greyscale or color?

Similar Messages

Tiff Photos now only showing Thumbnails in Preview

Since upgrading to CS6 TIFF photos only show as thumbnails in the large preview window, and Description metadata is not showing. The same photos in JPEG format display correctly and Description data shows. I'm using Mac OS X 10.9.1. I've used Bridge for 15 years and never had this problem. I've searched Adobe Help and forums and can't find this discussed. Has CS6 changed its handling of TIFF files or has a setting changed on me.
Thank you.
Ross Hurley

Did you find a solution? I have the same problem, have pueched the cache etc but still all I get with a tiff is a thumbnail, if I zoom in it pixelatesbecause it really only is a thumbnail, although when i click to open in photoshop it opens fine. Any ideas?

My Iphone 4 just updated to the iOS6. I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto. However, although Iphoto recognized my phone, it shows no photos to upload or backup. ??

My Iphone 4 just updated to the iOS6. I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto. However, although Iphoto recognized my phone, it shows no photos to upload or backup. It lists my phone in the "devices" category on the left bar, but no longer shows any of my photos.
Does anyone have any suggestions?

I've reread your question several times and am not sure I understand it.
Are you trying to basically start over, as if you just took your iPhone out of the box? If so, do:
Settings > General > Reset > Erase all content and settings

Calling infotype 0002 in ALV report for showing employee photo

Hi all,
The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
Thaks.
JAY

Hi Jay,
It is possible. Please refer the syntax for the CALL TRANSACTION
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
                    | [USING bdc_tab [bdc_options]] }.
You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
For example, I just had a solution to go to the roles tab in the user profile and I did as below:
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0050'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_CURSOR'.
    wa_bdcdata-fval   = 'USR02-BNAME'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'USR02-BNAME'.
    wa_bdcdata-fval   = g_value.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = 'SHOW'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0100'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = '=ACTG'.
    APPEND wa_bdcdata TO it_bdcdata.
    g_opt-dismode = 'E'.
    g_opt-defsize = k_ok.
*** if user click on the User Name, call SU01
    CALL TRANSACTION 'SU01' USING it_bdcdata
                OPTIONS FROM g_opt.
Regards,
Selva K.

My Viewing area only shows one photo at a time now :(

Yesterday I noticed that my viewing area only shows one photo at a time. It used to display thumbnails of all the photos in the selected event - or library. Now, I'm forced to scroll down and view them one at a time or go into edit mode to see some thumbnails across the top of the screen.
Did I accidently do this? Was it part of an OS update? (I've been away for a month and just don't think I did anything to cause a change...) Can anyone tell me how to view all the thumbnails in the viewing area again?
I'm using iphoto 08 version 7.1.5 (378)
I would very much appreciate some help with this.

Thank you so much!! I love simple answers. I actually spent a few hours on this - seemed to play and test all the settings - and I just didn't understand this application of that slider.
Thank you again.
I'm very happy.

How to show my photos in my LG 10.1 Android pad on my TV thru USB port?

How to show my photos in my LG 10.1 Android pad on my TV thru USB port?

DDCD,
I love having the ability to show picture on the TV to my friends and family. I was able to pull up some details on the tablet. I am showing that screen mirroring is currently not available for this device. Another option that you can alway try is if you have an SD Card in your tablet you can always put that in SD Card Adapter and pop that into the TV's SD Card reader. Most flat panel TVs have an SD card reader. If you're not sure whether yours does, your owner's manual will let you know.
KevinR_VZW
Follow us on Twitter @VZWSupport

How to show a photo in pages by VC?

How to show a photo in the table or the detail in the pages generated for the Composer Appearance? Example: The user makes a search, receives as resulted a book list, he would like to show in this list an icon with the cover of each book and when clicar in the icon to open the detail of the book showing an image of the cover. How to make this in the VC? Thanks in advanced!

- Use a "Form view", create a button there.
- Double-click on it and create on the tabstrip "Action" a custom action "NEWIMAGE"
- Apply to "[self]".
- Connect the output-port of the Form view with the input-port of the HTML view
- Click on the line between the ports
- double-click on the field "url*"
- enter now a formula in the formula-editor that allows you to e.g. get the url from a data-field
(you can test it with just inserting a url in the formula like 'http://www.sap.com' - don't forget the quotes- and that is different from the default url)
Mario

Printer properties continue to show HP photo paper, despite Preferences being set for Automatic.

Yesterday, while attempting to print a Word Perfect 5 document (my word processing app), the printer( HP Office Jet 6500 E709) operated, passed the paper through and made the printing sounds, but no ink was applied to the paper. I thought perhaps the cartridge had run dry, although I usually get a warning and then can visually see from the finished print job when the ink cartridge is empty. My PC is running Win XP Professional, and the printer has never been a problem. I installed a new Black cartridge and successfully printed off a test page. Still could not print the WP document, or any other document from "my documents" file. Tried the "copy" function and the printer worked fine. Still no document printing. Printed a Yahoo e-mail using the "print" option at the top of the message, and the printer worked fine. When printing from that icon, I got a pop-up display with a menu option labeled "preferences." This is the standard routine when printing an e-mail. I clicked on preferences saw that they were set at automatic, portrait, and color. I changed color to Gray Scale, black ink only, and the page printed properly. This has always been the routine, whether printing an e-mail of printing a document. Then I went to my WP document and hit the printer icon on my task bar and got a different pop- up display. In this display there was no "preferences" option, only a "properties" option. When I pressed that button I saw a setting that said HP Photo paper, portrait, grayscale high quality. I changed the paper type[ to "automatic" but cold not change the color option to black ink only. I closed the menu and attempted to print. No ink. I repeated the steps and discovered that the properties had reverted back to HP Photo Paper. I attempted to print from the File menu and by using Cntrl P. Neither option worked and the "Pproperties" continued to show HP photo paper, even though I changed it after each failed attempt and the hopper was full of white ink jet paper. I deinstalled the HP printer and reinstalled it using the original discs. Since the reinstall, the preferences are set as desired, and remain that way every time I chack them. I can print a test page, copy and print email. However, when printing from the print option in File, the task bar printer icon or Cntrl P, the pages continue to be processed but no ink is applied. The pop-up menu that appears when using any of these commands always contains the term "properties" and those properties always show HP photo paper as the stock being used. Regaerdless of how many times I correct the paper type, the entry reverts to HP photo paper after each attempt at printing.

I have the B8550 too, and I just assumed that since it's a fairly high-end printer, it would support the highest-end HP photo paper (i.e., Premium Plus). However, the manual states:
HP Premium and HP Premium Plus photo papers are not supported with this product.
Now, I don't know if that means you shouldn't use it, or that the advanced features won't work, or ??? Or if you should use it, what settings to use (since that type of paper is not listed in the options on the drop-down menu.) I have used the Premium Plus Soft Gloss without any problems. But HP seems to think that the highest quality paper you can use with this printer is "Advanced," which is their third-grade paper. Not exactly what I'd expect from this type of printer.

How do I get rid of the "AirPlay sign" on my TV when I am using Apple TV to show my photos as screen saver

How do I get rid of the "AirPlay sign" on my TV when I am using Apple TV to show my photos as screen saver?

Settings > AirPlay > Conference Room Display > Off.

I just bought a MacBook Pro, and need to d/l my photos from my memory card reader. iphoto keeps coming up as the app to use, but the column on the left says "No name, and shows 0 photos on the black screen. How do I view the photos on the reader?

I just bought a MacBook Pro, and need to d/l my photos from my memory card reader. iphoto keeps coming up as the app to use, but the column on the left says "No name, and shows 0 photos on the black screen. How do I view the photos on the reader?

Did it... When I clicked on "No name", a file folder came up and, I forgot to put MacBook Pro in the name bar... That was it! Maybe someone else can use this post Hopefully...

My IPhone 3Gs is in showing everything Photo negative manner.

My IPhone 3Gs is in showing everything Photo negative manner. How to bring it to normal viewing?

Go to Settings>General>Accessibility
Make sure that the White on Black is set to off, and that should set it back to normal.

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use. I have uninstalled/re installed twice, cleaned system, adjusted Bridge settings with no change. And I have found no helpful troublshooting tips in forum or on web.

Does it freeze with other type of cards. Have seem some post that suggest an imbedded CODEC on the flash card can cause file corruption in Bridge and Mac Finder.
To access the crash log it is officially called the event log. To access us OS Help.

IPhoto 9 does not show any photo of old Mac Mini's iPhoto 7 library

I'm trying to migrate an 80GB iPhoto library from my old Mac Mini to a new iMac. The old Mac Mini has iPhoto version 7. The new iMac iPhoto 9.
When I copied the complete library, iPhoto does not show any photos. How can I fix this? I already tried:
Using iPhoto Library Upgrader – however it shows: Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
Using iPhoto's rebuilding etc functions on both Macs – this does not do the trick
Using iPhoto Library Manager – also shows 0 photo and rebuilding does not work.
Anybody knows a solution?
Thanks!

Doesn't work :
It is also quite strange that iPhoto just opens the library without any warnings, but without showing any of the content (photos, albums, etc.)

What does one do when iPhoto version 7.1.5 only opens one event without showing all photos?

What does one do when iPhoto version 7.1.5 only opens one event without showing all photos or any other events?

Depends -what other clues? What recently changed? Do you have a good current backup? best guess is to Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - and repair the database - if that does not resolve things rebuild your iPhoto library database
LN

Image capture and iphoto show no photos from iPod Touch

I am running OS 10.6.8 on my iMac and using iPhoto 7 and image capture. When I connect my iPod Touch (3rd generation) to my computer, both applications show my ipod as being connected, as does iTunes, but neither of the applications show the photos that are on my iPod. Normally I would be able to download them from my iPod, but they are not showing them, though they are clearly on my iPod.
What has changed? This has been working fine until now. Was it because of the iOS update?

You said " my iPod Touch (3rd generation) ". The 3G does not have a camera and thus does not have a Camera Roll album. It does have an album titled "
Try:
iOS: Unable to import photos to computerSaved Photos".

Bridge showing tiff photos in greyscale.

Similar Messages

Maybe you are looking for