Bridge SRP with IOS device for routing.

Hi,
Can someone please detail how-to use the SRP (essentially bridged) for WAN connectivity and an IOS device. I plan to use an 881 ISR for routing, NAT, IPSec, GRE and PAT.
I note Ethernet port 4 on the SRP -U model is a selectable LAN/WAN port? But I can't find any documentation on how-to use this for WAN?
The reason for wanting to use the SRP for WAN is 4G LTE is the only available WAN option for us (using the Sierra Wireless 320U via USB interface).
I could not find any 800 series ISRs that support a USB WAN with the Sierra Wireless 320U? Correct me if I am wrong.
Regards,
Trent.

Hello Yannick B.
Once you have enabled iTunes Match and then add music from a CD, it will automatically add those to iTunes Match for you or you can go to a drop down menu Store > Update iTunes Match to add the tracks. If you have iTunes Match enabled on your iPhone, you will see the changes rather quickly once uploaded.
If you want to delete music from iTunes Match, just delete the tracks and a prompt will ask if you want to delete from iCloud. That should answer those questions for you.
iTunes Store: Subscribing to iTunes Match
http://support.apple.com/kb/ht4914
iTunes Store: How to delete songs from iCloud
http://support.apple.com/kb/ht4915
Regards,
-Norm G.

Similar Messages

Why only 39 mbps with iOS devices?

I have an Airport Extreme which runs firmware version 7.4.2. When I got an iPad several months ago, I noticed that the AirPort Utility reported a transfer rate of only 39 mbps to it. Even if the iPad was only a foot away from the router. Macs connect with rates of up to 130 mbps on the 2.4GHz band and 300 mbps on the 5 GHz band. If I switch the router to G-only mode, all the devices connect at 54 mbps.
I have been unable to find out why this happens. Some other people on the iPad forums reported this too, but I could not find an answer.
Yesterday I got an Apple TV and it connects at a 39 mbps rate too. So now I suspect that the problem is with the AirPort and not the iPad. It does not seem to work properly with iOS devices. Does anyone know what causes this and if there is a fix for it?

I have a new Airport Extreme N that I got a few weeks ago and
I just did a check with my Ipod 3rd gen w/iOS4.1 and it is connected
at 54 Mbps, and my iMac which I am using at this moment
is at 300 Mbps and when my MacMini is up, it connects at 300 Mbps.
It seems that there may be an issue with your Airport or, there may be
alot of interference in the B/G bands where you are at.
Also note, that all my Airport settings are at default. I did not do
anything special except change the IP address assignment numbers.

How use time capsule with IOs device ?

Hi ..
I have 2 time capsule and iphone and ipod touch
and i saw this on apples website...
how can I use the time capsule with IOs devices please ?
thanks a lot.
here is the picture

Thanks for the clarification....(our crystal ball is broken).
You might want to take a look at an App like FileBrowser.
App Store - FileBrowser - Access files on remote computers
The experts in the iPad support area will probably have more ideas for you as well if you want to post over there.
Using iPad

Email settings DO NOT WORK WITH iOS Devices

Vz keeps sending these "important" instructions for email port settings, BUT they do not work with iOS devices--iPhones and iPads. Last go around with this I spent over 16 hours trying to reconcile until an Apple Expert discovered "special" instructions for iOS device settings. Get with the program, Verizon.

So what are the special instructions?

Edge Animation having troubles with iOS devices within Muse Site

Hi All! I've been creating a mobile version of my website www.rinkdesigns.com and have it all complete. I created an animation/navigation bar within Adobe Edge Animate and imported it into Muse. It functions AMAZINGLY on my Nexus 4 (Android) in Chrome but on a buddies iPhone 5 Chrome only loads about 3/4 of the animation/nav bar, in Safari the animation does not load at all and half of the page background does not load either. Please check out the preview site here http://rinkdesignsmobile.businesscatalyst.com/phone
Has anyone else been having animation/mobile troubles with iOS devices? Any hints as to how you fixed your errors would be extremely helpful! I also posted this question in the Muse forum and haven't gotten a response...
Thanks,
John

Or, how about this:
Does anyone know how to have Edge Animate objects that utilize "_top" in an open url trigger make the Muse site that they are a part of open a new window/tab with that action (as opposed to having it open the url in the current page, or using "_blank" in the trigger)?

HT204150 iCloud Contacts with iOS devices

I've tried each step under "Troubleshooting iCloud Contacts update or setup issues with iOS devices" several times to no avail. I can't get icloud to update Contacts on my iPhone 4. Any suggestions will be greatly appreciated.

Welcome to the Apple Community.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode.

Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode. What changes I have to made to work great in iOS 7 also.

I rewrote code for debugging purpose and tried to catch error using GetLastError();  method,
but it only printed 0. Below is code snippet; I think Create() throw an exception
and code goes to catch block.
LONG ConnectTS(CString strIP, UINT n_Port)
try{
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
// Exception Line
n_Err = GetLastError();
return NET_INIT;
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image
System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Output: -
ConnectTS is calling Create [is going to call]
Image System
0

Remove iPhone 5 with iOS 8 for sale

How can i remove iPhone 5 with iOS 8 for sale as i am upgrading to iPhone 6?

Do you mean set it back to factory settings
if so back up and then turn find my iPhone off
the go to settings down to reset and IPhone will reset as new.
bsydd uk

Why does it take so long for iTunes Match to synch with IOS Device?

This weekend I ripped about 15 CD's that I had purchased from Amazon.com. For some reason it took a long, long time to get into iMatch. Granted some of the CD's weren't popular and may have needed to actually upload as opposed to match with already stored music. But some were new, and popular releases.
Typcially I rip, let iMatch do its thing and just stream the music, not download, to my IOS devices. I did leave my iMac running for several hours, and even after iTunes on the iMac showed an successful match some music didn't show up for a day, or if it did it was "ghosted" and I could not get it to stream.

have the same problem since upgrading to i tunes 7 and can only guess it's the size of my library - nearly 200gb. A friend of mine who's library is 20 gb or so has no such problems. If there's another reason and we can do something about it I too would love to know!

Have four family members with iOS devices on same account. How do I set up separate FaceTime for each?

Four members of my family have iOS devices. We are all on same account. How can I set up FaceTime so that we can contact each other. Right now it is confusing to use.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
 Cheers, Tom

Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices? recent problem starting March 1, 2015.

I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise. As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600.
On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's. Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date! but sadly stays on LTE.
Have tried resetting, replugging etc...
Also, tried checking on updates. Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
A mystery...

Reset the TC to factory and redo the setup. see details below.
Here is the typical list of things you should try.. and if this doesn't help post again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
How is the TC connected into the network? What function does it have? Router or bridge for example.
Post a few screenshots of the setup.

How can I share my iMovie projects in Mac with IOS devices?

Hi
I have a Mac when I develop my iMovie videos, and other IOS devices (iphone and Ipad), but to share my video projects, I need to do with iTunes and so.
Is there any other way to do it? with icloud?
It is complex for me to share / syncronice files (ibooks also) between apple devices.
Thanks

Easiest way - email yourself the files
open the PDF
It will provide you the option to open or view in iBooks
they will remain in iBooks when you do so

Internal server error while connecting SAP's customer financial fact sheet with iOS device

Hi all,
I am trying to connect SAP's customer financial fact sheet latest ( version 3.7) with iOS phone/iPAD (version 7.1) but it shows internal server error,
when trying to connect Neither "Gateway (direct)" nor "SMP Cloud" enabled with port 80/443.
On other hand my android devices with this app is working ok.
Trace Log is below:
2014-09-11 11:27:58.298 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
2014-09-11 11:27:58.295 Debug Request http://server:8010/url t finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server . The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
2014-09-11 11:27:58.286 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
2014-09-11 11:27:56.239 Debug DE:Using SUP Manual User
2014-09-11 11:27:56.238 Debug DE:Get svcDoc URL http://server:8010/url
2014-09-11 11:27:56.216 Debug DE:startSAPODataRequest CompanyCodeCollection
2014-09-11 11:27:56.204 Debug DE:SAPODataAccess dealloc CompanyCodeCollection
2014-09-11 11:27:56.198 Debug DE:CustomerCardsViewController refresh
2014-09-11 11:27:52.600 Debug Logging/Tracing on
2014-09-11 11:27:19.792 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
2014-09-11 11:27:19.787 Debug Request http://server:8010/url finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
2014-09-11 11:27:19.768 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
2014-09-11 11:27:12.717 Debug timeout
2014-09-11 11:27:12.681 Debug timeintervalinminutes: 23506917 timeoutInterval: 0
2014-09-11 11:27:12.679 Debug applicationGoesToForeground
Can anyone help me how to troubleshoot this error?
Any help will be highly appreciated.
Thanks
Mahesh

are these LUNs shared or standalone?
I don't think it's really wise to have more than one DSM on the same server, so you're mixing the EVA and 3par DSMs and on 2003...
other than ensuring that HBA firmware and drivers are all up to date and DMS drivers are at the latest, not much else you can do from the host side...maybe update the storport.sys driver to the latest for that OS
are you sure that the HBAs are in fact supported/compatible with both storage back-ends? what about their driver/firmware/DSM versions - some SANs are very picky when it comes to this stuff, check the interop matrixes to find out
overall, if you don't need SAN connection to one of these storage back-ends, I suggest you get rid of it and its DSM

Wifi roaming with iOS devices

I have a weird problem that I find hard to diagnose.
We have 6 iOS based devices: 2x iPhone 3 (iOS 4.2.1), 2x iPhone 4 (iOS 5.1.1) and 2x iPad 3 (iOS 5.1.1). Our Apple Wifi network has 2 APs: 1 Time Capsule (TC) and 1 Airport Extreme (AE). Both AP are interconnected with Ethernet cabling, the AE is connected to the internet and also function as the NAT and DHCP host. Both TC and AE run firmware 7.6 and are set up with the same SSID, both on channel 11. They are located at opposite ends of our apartment to create maximum radio coverage in the apartment.
All iOS devices roam from one AP to the other when moving around EXCEPT one of iPhone 4. This iPhone only connects to the TC and is also not visible in the airport utility (both the iPhone version as well as on the Mac) when asleep. All other devices remain visible in airport utility even while asleep.
Any ideas which settings to check to on the iPhone 4 that doesn't roam? Does it have to do with the fact it loses the Wifi connection while asleep?

Thank you for your response, however I tried "forget this network" and "reset network settings" before I started this thread and that didn't help. I find the restore option a little drastic measure before knowing what could cause certain behaviour.
To make sure I repeated step forget this network again, while being very close to the AP it fails to connect (=AE). I noticed that on the first attempt to connect it reports "unable to join the network "<SSID>". On the second attempt it does connect. Then it suddenly hit me that the problem may be on the AP side: the first attempt it tries to connect to AE but fails, on the second attempt it connects to TC. This iPhone was recently replaced by Apple under warranty and I use MAC Access Control on the APs. Normally you enter the MAC address of a new device on one AP and the new device shows automatically up on the access list of the other AP. However in this case I updated the existing entry on only one AP (the TC) and after checking the other AP (the AE) it still had the MAC address of the previous device. I assumed that changes to MAC access control on one AP would also be propagated to the other AP. Once I also manually updated the entry on the AE, it started to roam as expected.
One additional note: the iPhone 3 running iOS 4.2.1 do drop the wifi connection while asleep AND not being powered with the USB cable. As long as they have external power they maintain the wifi connection. The iPad 3 (using iOS 5.1.1) will maintain the connection in any condition. The 2 iPhone 4 are still showing different behaviour, one drops while the other maintains the wifi connection in sleep mode. This could be caused by a difference in apps running on the 2 iPhones. But I don't really care as it doesn't affect the user experience.

ITunes Match - Sync with iOS device

I am thinking about buying iTunes Match, but i first wanna make clear some things up...
here are my questions:
1. Will I ever have to sync my iPhone again with my computer (over WIFI or Cable) or will my iPhone automatically download the music! Or will i have to individually download the music on to my phone? Because now if I load a new CD in my iTunes i just plug my phone into my MacBook and after that all my selected playlists will be updated and ready to listen to (without any internet conection obviousely), how will this be with iTunes Match?
e.g.: I have this new cool tune that I import and put into my list "my favorite songs"! Will this song immediately be on the same list on my phone? online or offline?
2. What do I have to do if i wanna delete an album on my computer? But I mean delete it forever, also out of the cloud! how do i do this, and will these tunes also dissapear on my iPhone (like they do now as soon as I sync my iOS device with my Mac)? Will I have this music present in my cloud forever?
Thank you for your help!
Cheers
Yannick B.

Hello Yannick B.
Once you have enabled iTunes Match and then add music from a CD, it will automatically add those to iTunes Match for you or you can go to a drop down menu Store > Update iTunes Match to add the tracks. If you have iTunes Match enabled on your iPhone, you will see the changes rather quickly once uploaded.
If you want to delete music from iTunes Match, just delete the tracks and a prompt will ask if you want to delete from iCloud. That should answer those questions for you.
iTunes Store: Subscribing to iTunes Match
http://support.apple.com/kb/ht4914
iTunes Store: How to delete songs from iCloud
http://support.apple.com/kb/ht4915
Regards,
-Norm G.

Bridge SRP with IOS device for routing.

Similar Messages

Maybe you are looking for