Bridge - thumbnails do not update

I am running Bridge 2.1.1.9 on an iMac G5, OSX 10.4.11. When I modify an image file in Adobe Camera Raw (opened from within Bridge), the thumbnails in Bridge do not reflect the change. For example, if I crop an image and adjust the tonal values, the changes are not reflected in the thumbnails after I close ACR. I have purged the cache and also exported the cache but neither has helped.
Mark Weidman

As far as my testing, I found 2 factors are affecting:
1)'Quick Thumbnail' or 'High Quality Thumbnail'?
2)Click 'Done' or 'Save Image' button after editing in ACR?
Here are my repro steps, as far as my testing, it can 100% reproduce :
1.Reset(3 keys)/launch Bridge(CS3) and browse ACR file, like .CRW, .NEF, .dng, and etc.
Now all default settings in Bridge window, thumbnail is in 'Convert To High Quality When Previewed'. All ACR files are displayed in 'Quick Thumbnail' in Content panel.
2.Select an ACR file,
note once you select on this file in Content panel, it will switch to High Quality.
3.Open this file in ACR(via right-clicking contextual menu 'Open in Camera Raw')
4.Do some edit on this file in ACR, like Crop
Result:
1.If click 'Done', then check this file in Bridge : The file is selected in Bridge, and it can show changes in High Quality; but when purge cache, it shows as original state in Quick Thumbnail.
2.If click 'Save image' and saved as a new file1 : This file1 can show the change no matter High Quality or Quick Thumbnail.

Similar Messages

  • Bridge CS5 previews not updating?

    I recently upgraded to CS5, and now I'm tearing my hair out.  It's the first version for me that does not update a preview after I've made adjustments to the raw image.  I've looked through preferences and don't see anything to check or uncheck.  Right now the only way I can see if I've lightened or darkened an image, for instance, is to double-click it and open the editing window in Bridge.  There has to be a better way!
    Anyone?  Your help is really appreciated.
    Thanks,
    Karen

    Okay, I found it after looking at another Bridge question and having someone mention filters.  Filters weren't the problem, but looking around for this made me poke around in the top right side of the screen, where I found this:
    It was set on Prefer Embedded, and I changed it to Always High Quality.  Now I can see what I'm doing.
    Cheers,
    Karen

  • Thumbnails do not update after changed are made in the raw module?

    I am editing raw files in bridge. The changes that I have made in RAW do not transfer to the bridge thumbnail page when I leave the raw module.  I can see that I have made changes by the little symbols for crop etc. in the thumbnail, but no live changes.  Any suggestions?

    Judy Lovins wrote:
    I am editing raw files in bridge…
    No, you're not.
    Bridge is just a file browser, it doesn't open, edit or save any files at all.  It just hands the file(s) to the appropriate application, whether that be Adobe Camera Raw (ACR), Photoshop, Illustrator, Acrobat, or even MS Word.
    Check your Thumbnail preferences in Bridge Preferences.

  • Bridge CS4 will not update to Camera Raw 5.7 on one of my computers.

    Bridge (CS4) will properly display my Nikon NEFs (from my Nikon D3 & D3S) on my old Mac Pro (Lion 10.75) but only the NEFs from the D3 are displayed on the exact same program on my MacBook Pro Retina - Mavericks).
    I have followed Adobe's instructions perfectly, over and over again, but no matter what I try (and I did try some variations) I cannot update from Camera RAW Preferences.Version 5.0.0.178 on the MacBookPro Retina.
    The Camera RAW preferences Version on the older Mac Pro computer's identical copy of Bridge CS4 is Version 5.7.0.213.
    I tried opening and installing a download of Camera_Raw_5_7.dmg from Adobe and I also tried dropping in the Camera Raw plugin file from the older computer but nothing works. I have emptied the cache several times.
    I dont know if this is significant but when I first started trying to do this, I could not find the Plug-Ins folder in the Adobe file on the MacBook Pro Retina, so I copied the one from the Mac Pro's Adobe folder.
    Please help. I can only use Bridge on my older desktop computer because of this problem.
    Thank you.
    Jan

    Well, Jan, over the years I've helped many Mac users with this precise problem, and I even posted screen shots showing the path to the correct plug-in folder for ACR.  However, in your case all those images won't help and I won't be able to generate new ones for you for one simple reason: I do not use Mavericks and never will because my Mac Pro desktops cannot go above Lion, FORTUNATELY. Mavericks is still cr@p at this point.
    All I can do is try to clarify a few misconceptions for you:
    AutoMatters wrote:
    …I read that about the root level library when I first tried to follow the instructions from Adobe and I thought that I was doing exactly that. Instead of the library associated with my name, I found the library associated with my hard drive. I suspect that I have not yet even seen the root level library…
    Jan, that is the ROOT LEVEL Library.
    Getting back to your advice, I do not understand what you mean by mounting the .dmg file as if it were a DVD or external hard drive.
    I mean just that.  A Disk Image file (.dmg) is a virtual disk, like a virtual DVD.  You double click on that file in the Finder and it will then mount just as if you had inserted a DVD into your computer.  It will then show you the contents it carries.  I will not be at my computers for a few weeks, so I can't be sure about all that the Disk Image for that update shows; but somewhere in there will be the ACR Plug-in.  That's what you need to copy from the Disk Image to your hard drive and install it in its correct location, NOT THE BLOODY .dmg file, for goodness sakes!
    Do you understand that once you are at the ROOT LEVEL Library you DO NOT go to the Plug-ins folder therein?  Read the instructions again.  What you want is to continue the path through the Application Support folder /Adobe / Plug-ins / etc.
    This old screen shot may help. Command or Control-Click on the thumbnail to see the full image in a new window, then scroll horizontally; it is a VERY wide image:
    Also, if I delete the Plug-ins folder that I copied from my other computer's installation of Bridge CS4. Should I reinstall the entire CS4 suite from the original disks and start all over again. If so, I read somewhere that I will need to somehow deactivate my serial number from the products as installed on my MacBook Pro so that I may reinstall it.
    Delete anything you may have copied yourself only if you are 100% sure what that is. But DO NOT REINSTALL ANYTHING without first uninstalling using the Adobe UNINSTALLER that was installed in your Utilities folder inside your Applications folder.
    Whatever possessed you to go around copying folders from a different Mac OS version? ???  That is insane! Geez…
    Why the heck do you keep talking about Bridge? ??? !!!  Bridge has absolutely NOTHING to do with the installation of ACR.  NOTHING!
    ACR is installed at the OS level and can be hosted indistinctly by Photoshop or by Bridge from the same location.
    Bridge is totally out of the loop in this discussion, just as it is when you are using ACR hosted by Bridge.  All Bridge does is call upon the appropriate application, whether this be Photoshop, Adobe Camera Raw (ACR), Illustrator or even Microsoft Word and hand it the file, period.  You could use ACR for years without ever launching Bridge, even without having Bridge installed. Ever.
    Irgendwie vermute ich, daß Deutsch Deine Muttersprache ist. Oder irre ich mich?

  • Safari Top Sites thumbnail images not updating automatically?

    is it happening just with me, or the automatic update of the Top Sites thumbnail images is not working anymore?

    It is intentional. When on the Top Sites view, hit Command+R to refresh the images. Supposedly this was done because the previews don't do a good enough job of detecting weird login pages and wifi password pages.
    Personally, I'd like it to have an option to go back to updating the images on its own again.

  • Thumbnails not updating after external editing.

    I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
    I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
    I did try restarting Aperture before the doing the "option - update preview" and that had no effect.

    Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
    I am using 3.0.1 now and that is where I am seeing the issue.

  • CS 5.5 update to v.5.0.4 is not updating...

    Hi,
    I am trying to update my CS 5.5 (in particular I am having problems with Premiere Pro) (Adobe Bridge is also not updating to v4.0.5) I have not moved or deleted or changed any of the files since they were installed on the computer, but the update to v.5.0.4 always fails with this message:
      Adobe Premiere Pro CS5 v5.0.4
      Adobe Premiere Pro CS5 has been moved or deleted improperly. Please launch or reinstall the application to update the location and try again. To remove the product from the system, please uninstall product using the aliases under "/Applications/Utilities/Adobe Installers". Error Code: U44M1P29.
    I'd really like to not remove all the programs and reinstall everything, is anyone else having this problem or is there a work around to help me out.

    The Adobe Creative Suite Cleaner Tool is used (it is Run, and not installed, per se) to remove any vestaige of a previous version, that might have been left over, with an Uninstall. Be sure to read the complete instructions.
    As for running both CS 5, and CS 5.5, yes, you can have both.
    Good luck,
    Hunt

  • Why is bridge not updating the thumbnails

    I've even tried reinstalling Adobe but it didn't help

    Thanks for replying so quickly
    I did purge the cache and changed the limit but with no luck. It was working fine a short time ago then all of a sudden thumbnails don't update when i click done after w. If I go back into a raw file all the changes I made in raw are still there but the thumbnail doest change. I hope some can help. I'm working on a big wedding shoot from yesterday..
    Best regards Randy

  • Bridge opens Raw thumbnails but not Preview?

    In Bridge I can open Raw files from my Canon 6D as thumbnails but not as the large Preview. The files will open in Camera Raw 8.1 with no problem. I have Photoshop CS6 13.0, and Bridge 5.0.0.399. I am on a Mac Pro OS 10.8.4
    What can I do?

    Thanks Curt. Went to Downloads, then to Product updates and there I found updates for all Adobe products; clicked on Bridge for Macintosh and downloaded 5.0.2.4; then clicked on Photoshop for Mac and downloaded CS6 version 13.0.4 (didn't have 13.1??). Everything is working properly now. And I have learned how to find updates at Adobe! Thanks again.

  • Preview Thumbnails not updating.

    My normal way of processing photos is to preview a folder in Bridge, from Bridge open a photo in camera raw and process it there. If I'm not using that image immediately, I simply close it when I'm finished processing. Then I'm back in Preview mode in Bridge and I can see the photograph that I processed and the changes that were made. I've been processing photos from several cameras this way for years.
    However, I'm using a new camera system. Lumix GH3. When I preview and process photos from this camera, the thumbnails are never updated with the processed image. They always show the original one. Even if I close that folder and reopen it in Bridge, I still don't have a preview of the processed images. If I reopen the photo in Camera Raw or Photoshop, sure enough, I can see the changes, the photo IS processed. But those changes never show up in the preview thumbnails.
    At first I thought this was the particular SD card, which was new to me and supplied by the camera store where I purchased the Lumix. But I've tried several now, all with the same result.
    Any ideas??
    Macbook Pro, OS 10.8.3. Bridge CS6 v5.0.1.21, Photoshop CS6, v13.0.3 x 64.

    Any ideas??
    Macbook Pro, OS 10.8.3. Bridge CS6 v5.0.1.21, Photoshop CS6, v13.0.3 x 64.
    It might be cache related, for test select one of the files that did not show the updated changes and with right click mouse menu choose purge cache for selection.
    But a second thought is that you don't use the latest updates for both Bridge (should be 5.0.2.4) and PS (should be 13.1.2) and this causes the troubled behavior.
    And it might be the combination of both

  • Previews in Adobe Bridge in Essentials View do not update after manipulation in Adobe Camera Raw

    When I open a RAW file in Bridge and manipulate it in ACR, the preview is not updated in Bridge Essentials View.  The only way I can get it to update the preview is to open the file in "Preview" view, then it updates and looks fine in Essentials view.

    Is Bridge set up to store the ACR modifications to those XMP files? Only then it can update the preview right after working on it. Else you need to refresh the preview cache.

  • HT201269 My iphone contacts are not updating to Icloud, I can create a contact in Icloud and it will update to my phone but I cannot create a contact on my phone to have it update in the cloud, I am using Itunes as the bridge

    My iphone contacts are not updating to Icloud or Outlook, I can create a contact in Icloud/Outlook and it will update to my Iphone but I cannot create a contact on my Iphone to have it update in the Cloud/Outlook, I am using Itunes as the bridge. I originally installed the Icloud manager to sync my contacts to Cloud/Outlook, but I did not like the functionality, when I uninstalled the Cloud manager and and installed Itunes I noticed that the none of my contacts in the phone updated to Outlook.
    Thanks in advance.

    Hi Cyclops12,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    Cheers,
    - Judy

  • Can not update photoshop keep getting this error Adobe Bridge CS5 4.0.5 Update   There was an error downloading this update. Please quit and try again later.     Adobe Extension Manager CS5 5.0 Update   There was an error downloading this update. Please q

    can not update photoshop keep getting this error
    Adobe Bridge CS5 4.0.5 Update   There was an error downloading this update. Please quit and try again later.   
    Adobe Extension Manager CS5 5.0 Update   There was an error downloading this update. Please quit and try again later.   
    Photoshop 12.0.4 update for Photoshop CS5   There was an error downloading this update. Please quit and try again later.   
    Photoshop Camera Raw 6.7 Update   There was an error downloading this update. Please quit and try again later.
    contacted customer service they could not help me I have previously had Photoshop on two other computers I deactivated it from one computer to put on a new one put. Can not do the updates I need them for camera Raw.
    Please Help

    What operating system are you using?
    You can try searching for, downloading the updates yourself and running the installers:
    Product updates

  • Installed Photoshop CC & Bridge CC Updates & now Bridge CC will not open at all

    Operating System - Windows 8.1
    Video Card Version - NVIDIA GeForce GT 640 Driver Version 9.18.13.3788 updated 6-19-14
    Processor - Intel Core i7-3770 12 GB RAM, 64 bit OS
    PS CC 14.21.1 x64
    Bridge CC 6.1.0.116 x64 (I think, I cannot open the program to verify)
    Problem:
    Bridge CC will not open.
    How Problem Began:
    I installed three updates on 6-19-14 - Photoshop CC, Bridge CC and Photoshop CC 2014.  After do that I could not open Bridge from the Windows Start menu, the task bar or from PS CC using  File>Browse in Bridge or File>Browse in Mini Bridge.  When trying to open from Start or the Task Bar the icon highlights for about 2 seconds then goes back to normal.
    There is no error message or any message except when using File>Browse in Mini Bridge in which case a "waiting for Bridge CC..." message shows continuously but Bridge CC never launches.
    NOTE: Bridge CC was used daily prior to updates with no issues.
    Steps Taken So Far:
    I uninstalled Photoshop CC 2014.
    I uninstalled Bridge CC and Photoshop CC and reinstalled them with and without the above updates several times.
    I called Adobe and was given this links with steps to try: Troubleshoot errors, freezes | Adobe Bridge | Windows, Mac OSI could not do any of the steps that required opening Bridge since that is the problem.  But I did verify no other versions were running in background, updated video card dirvers and temporaily disable scanning programs.
    I deleted the SwitchBoard file per this page: Error: Waiting for Bridge | Mini Bridge panel
    I created a new Windows user and attempted to open through that user.
    None of the above had any impact.
    Does anyone have suggestions of next steps to try to resolve this issue and get Bridge CC working again?

    With that kind of file corruption, you may need to do the following...
    Sign out of your account... Uninstall... run the Cleaner...
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
    -using the cleaner after uninstalling and before reinstalling is needed
    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    -Restart your computer... Sign in to your account... Reinstall
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • My .mov file thumbnails do not display in Bridge CC.

    My .mov file thumbnails do not display in Bridge CC. It worked previously with CS6. Mac Operating system 10.6.8
    Tried purging cache without any luck. Any suggestions.

    This forum is actually about the Cloud, not about using individual programs
    Once your program downloads and installs with no errors, you need the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/bridge

Maybe you are looking for