Bridge to PS CC 2014: Error "Windows Cannot Find Photoshop CC" for PSD & TIFF files

Since installing PS CC 2014, I have been unable to open PSD & TIFF files from within Bridge. If I do- I get the error above. Once Photoshop CC 2014 was installed, I removed the older version of PS CC.
Sounds like a registry issue created when PS CC 2014 installed alongside PS CC; confusing Bridge of where to send Photoshop files.

Looks like bridge is still trying to run the old version. Did you uninstall Photoshop CC after installing Photoshop CC 2014?
Have you made sure and fully closed Bridge and reopened it? Logging off and back on would ensure that.
Failing the above, people have reported success with using the Creative Cloud Cleaner tool followed by a reinstall of Photoshop CC 2014...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel

Similar Messages

When I try to open a .jpeg in Bridge CC2014, I get the error message cannot find Photoshop CS6.

I have associated my .jpegs with Photoshop CC2014. I had to do this manually. Now, every other program opens them in Photoshop, except Adobe Bridge CC 2014.
If I try to Open a .jpeg (or any other file associated with Photoshop) Photoshop from bridge, it says It cannot find the photoshop cs6.exe file. Of course not! I uninstalled it before I installed CC. Maybe two years ago. And now Bridge CC2014 goes looking for that as the CS6 default Photoshop.exe?

I finally got it to work by going into Bridge->Edit>Preferences>Default settings. After choosing a file that is supposed to open in Photoshop, I chose to change it and browsed to Program Files>Adobe>Adobe Photoshop CC2014 and manually linking each filetype to the photoshop.exe.
I have spent the better part of a week getting Adobe software to work again after the Adobe CC2014 install. I will never trust Adobe CC updates again. They failed to warn me that CC2014 installs as a completely different copy rather than an update of CC. As a result, I ended up uninstalling CC apps after installing 2014. A mess that has cost me more than *30 hours* of chasing around forums, manually re-associating files. Even a registry hack! Found by a user, not by adobe.
Ordinary users shouldn't have to do this sort of thing after a normal install from the Creative Cloud panel. The genius software engineers at Adobe are being totally undercut by the keystone cops in the cc updates and install department.

Re-installing windows 7 on L440 - Error windows cannot find .bat

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

Getting the error "Windows cannot find '-Xmx128m' "

Hi all,
When I try to I execute workbench.cmd, downloaded with OracleR TopLink 10g Release 3 (10.1.3), I am getting the error "Windows cannot find '-Xmx128m' .Make sure that you typed the name correctly...." .Further, my application is based on Java Swing and not a web application.
I made the following changes in the <TOPLINK_HOME>/bin/workbench.cmd file :
a) Set the 'JAVA_HOME' to the JDK path, same as that given in the
Environment Variables setting.
b) Set 'DRIVER_CLASSPATH' to point to
<TOPLINK_HOME>/jlib/classes12.jar.
My System configuration is as follows :-
Operating System : WindowsXP
JDK Version : JDK1.4.1
Data Base Client : Oracle9i
Data Base Server: Oracle8i
Can anyone please suggest any solution for this problem.I 'll be very thankful.
Regards,
Manju

Have you run across this thread while trying to resolve this problem - How to start Workbench (Toplink 10g) Not sure if it applies to your situation, but thought it might be helpful.
If this doesn't help, perhaps you can paste the contents of your workbench.cmd file into this thread and we can try to debug the issue further.
Neil

Getting Error Windows cannot find Adobe Air installer

Trying to install Adobe Air. Installation file wont run. Get error when i run the file.
"Windows cannot find 'C:\Users\Matt\AppData\Local\Temp\AIR4654.tmp\Adobe AIR Installer.exe'. Make sure you typed the name correctly, and then try again"
I am trying to run the current version of Adobe Air from the Adobe website. Please help.
Thanks,
Matt

Still no luck cant play LoL...Was having an issue with a asus start up file what was in the TEMP folder also said not found....deleted a registry for it and that one stopped coming up when the computer started...but i still cant install adobe air.

Windows cannot find Photoshop CS5 Error in Bridge

This is really about Photoshop CS6 Beta but this error is generated whenever I tried to open a file from Bridge, either Bridge [12.1 or 13.0]. It was frustrating at first.
I tried to figure out why I was receiving this message. Originally, I had Photoshop CS5 on my system. Then, I upgraded to Photoshop CS5 Extended. Finally, I installed Photoshop CS6 Beta. After the last install, I decided to uninstall Photoshop CS5 which I no longer used. These are 64-bit programs but I doubt that makes a difference. Whenever I opened Bridge for Photoshop CS5 Extended or Photoshop CS6 Beta, the shown error would generate. After reviewing the error closely, I decided to try and look at file associations but not in Windows as I had no problems elsewhere. It must be in Bridge.
I went to Edit -> Preferences and found a File Type Associations section with every file type it uses. Sure enough, by clicking on the triangle to the right of the file type, it showed only Photoshop. By clicking on Browse and going to the Photoshop CS6 Beta folder, I was able to change a couple of the ones I use exclusively and clicked OK. Afterwards, no problems. To change each and every one of those is going to require some time on my part.
This brings up an important question regarding upgrades. I think most of us upgrade before uninstalling the old version. Here are my questions:
1. Why did not the Bridge associated with the extended version change the file associations to the appropriate version of CS5 when it was installed?
2. Why did not the Bridge associated with Photoshop CS6 Beta change the file associations to this version when installed?
At the very least, it should be an option but I think it should actually point to the new version. Is this a bug in the Bridge software? I know Bridge is used for other Adobe applications but this definitely seems to be a bug when the only application iis Photoshop. I have Lightroom 4 also installed but this application does not use Bridge. Can this be corrected?

Looks like bridge is still trying to run the old version. Did you uninstall Photoshop CC after installing Photoshop CC 2014?
Have you made sure and fully closed Bridge and reopened it? Logging off and back on would ensure that.
Failing the above, people have reported success with using the Creative Cloud Cleaner tool followed by a reinstall of Photoshop CC 2014...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel

Windows cannot find device driver for my ipod mini

Just got my new laptop and downloaded latest version of iTunes, but my iPod mini does not appear as a source. It appears in Device Manager but not My Computer. Any suggestions?

Not sure if these are applicable to Vista but worth a try.
USB drivers are not installed properly or are out of date.
iPod not recognized on a Windows laptop.
iPod not recognized on a Toshiba laptop.

Cannot find photoshop.exe for my previous cs6 after installing CC

I owned CS6 before I subscribed to CC. I cannot run my 64 bit cs6 non cc version as the exe file is no longer there. The 32 bit version has the photoshop.exe file, but not the file for the 64 bit version. Yes, I am looking in the right places.
Cc runs fine.
Apparently Cc overwrote something or? How do I run my non cc cs6 without the photoshop exe.? I have looked everywhere in the folders.There is a cs6 folder I have treid the search function and there is no 64 bit cs6.
Also, since I cannot get into it, and I did nothing, I cannot deactive it in order to reinstall it. Or can I not reinstall it without damagng cc? How can I run both?

check it on application folder

"Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
pasting the path to the file and dragging the file to the VM, but no luck.
If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

Hi,
According to your description, I would like to confirm if you have unchecked the Express installation box.
Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
Using Parallels Desktop to install Windows and the dev tools on your Mac:
http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
Regards,
Kelvin hsu
TechNet Community Support

I need help getting past the installation error "windows cannot fint TEMP file"

I need help getting past the installation error "windows cannot find TEMP file"

Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
http://www.compusa.com/products/product_info.asp?product_code=339900#ts
http://www.xpcgear.com/ide2sata.html
http://www.ubuyitdirect.com/-p-1045.html?currency=USD
http://www.satasite.com/sata-ide-converter.htm
http://www.pcgears.com/default.aspx?oid=187150

Windows cannot find 'C:\Program Files\Adobe\Adobe Photoshop CS4(64bit)...'

I've just installed the CS6 upgrade on my WIndows VIsta x64 bit machine.
Just now, I opened a folder of files in Bridge CS6.
I highlighted one of the files and selected Ctrl/o to host Camera Raw in Photoshop, which is what I always do.
But, I got an error message saying that Windows cannot find Photoshop CS4.
I did uninstall CS5 after installing the upgrade, if that makes any difference.
Any ideas?
Thanks.
D.

For some users an uninstall of previous version wrecks havoc with file associations.
First try edit/preferences/file type associations. Click on reset "reset to default associations". If that does not work click on individual file and set default to CS6.
If the above does not work you either have to unistall CS6, run the Adobe Script Cleaner or read registry solution in this link. http://forums.adobe.com/thread/1005273?tstart=0

Preview Template - windows cannot find file

Hi
While previewing the template from MS Word, it pops up with the following error --
Windows cannot find
D:\..\tmp\271234562718103out.pdf718103out.pdf
When i try to preview it as a PDF, the pdf is located in the temp folder by the name 271234562718103out.pdf but somehow windows is trying to find out 271234562718103out.pdf718103out.pdf and pops up with the error.
How is this file name getting generated? Everytime it appends some of the last characters to the file name.
Any help would be greatly appreciated.
Thanks in Advance
CJ
Edited by: user10511095 on Apr 20, 2009 11:41 PM
Edited by: user10511095 on Apr 20, 2009 11:42 PM
Edited by: user10511095 on Apr 20, 2009 11:42 PM

Open the following registry and set the work directory which does not include any spaces:
HKEY_CURRENT_USER\Software\Oracle\XML Publisher\Template Builder for Word\TB_WORK_DIR
In my case the above Registry Key has the value:
C:\Documents and Settings\p.jain\Local Settings\Application Data\Oracle\BIPublisher\TemplateBuilderforWord
and I changed it to:
C:\DOCUME~1\PAAAB~1.JAI\LOCALS~1\APPLIC~1\ORACLE\BIPUBL~1\TEMPLA~1
and it worked.
I suggest you copy the path from the error which you receive.

Windows cannot access the specified device, path, or file.

NOTE: My access is through terminal services.
I received a new server to load my IBM Rational products. I was able to load ClearQuest, Req Pro and ClearCase with no problems. Because this machine is being used as a web interface for the products, I needed to also load Crystal Reports XI along with the embedded report server. Well, I got everything installed but the embedded reports server.
On my attempt to double click on the file that would extract and install the addins needed I received the error message:
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.
After some testing I see that if I select any executable associated with installing an application, I get this error.
I've been searching all over the internet for a solution to this proble. Does anyone know why this happens and what I can do to fix it?

Ok this will be a long post, and for starters I wanted to point something out to everyone - there is two separate discussions going on in this thread. On one side you have a discussion about servers and people using thin clients or Citrix having this error
code and changing Internet Explorer to resolve this conflict. Then on the other side all the stand alone home users with XP and Vista and 7 trying to figure out what is going on with their install that has the exact same error code. Microsoft in their infinite
wisdom has given this error code to relate to multiple different errors hence the confusion.
Now here is my story, with out a resolution yet.
Ok, so I ran into a real nasty trojan virus, that is now resolved and gone. However, when I went into the process of being able to resolve this issue a sticky byproduct was this permissions issue. This is how it happens, I download a video with Firefox or
any browser Opera, IE whatever. Then after I have downloaded it into the proper location I can see it within the downloads list from the browser, should I double click to launch the video with WMV it will fail with that error "Windows cannot access the
specified device, path, or file. You may not have the appropriate permission to access the item". However, should I open the directory and then launch from the true download location, rather in the list of the files within the browser download list it
will launch fine. This is the problem I can utilize the programs directly launching them from explorer, however should I try and launch a program from inside another program it will fail to launch.
This is a Vista 64 bit installation, and I am pretty tech savvy individual. What I have tried thus far is to take owner ship of the directory since trusted installer was the owner previously. After I had done that I went into the permissions of the exe and
sought to make sure that the file was open for everyone to be able to modify and have full control - it was. After that I also tried launching the browsers as admin privileges to see if it would still launch. It will not it refuses to allow calls to this directory.
That being said it is also a big problem when I use Corel DVD Moviefactory, because this program is trying to launch other programs from this directory to run. So, I need to figure out why is it that I am not able to have programs make calls to this directory
and try and launch exe files and fail, yet the permissions are fine and I can launch them from directly clicking on the item in a directory?
Further clarification as to what happens:
Firefox downloads to Harvester\downloads
All my pictures, movies, executable, rar/zip, reside in this directory "downloads"
In the browser Firefox there is a "downloads" [contrl+J] list that shows what you have downloaded through the browser
All of these items are able to double click and execute from this list with out having to navigate to the "downloads" directory
When executing a WMV file it will fail and error out with the "Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item" error.
However, navigating to this directory will allow me to launch all programs with out any problem, the difference is I am launching from the file rather than through a program making a call to the x86 directory to launch the file. If I have an item that doesn't
require a program to launch from the x86 directory it will launch ok through Firefox, ex InfanView, HJsplit, etc.
This is a problem with other programs making calls to external programs residing in the x86 directory like Corel Moviefactory 7. While running it will make the same error "Windows cannot access the specified device, path, or file. You may not have the
appropriate permission to access the item" when trying to make a new DVD, because it utilizes something in that directory an external program.
This happens with Opera as well, don't know about IE I don't use it.
What I have done thus far:
Removed my firewall that was MS native firewall
Removed my anti-virus and malware software - AVG, MalwareBytes, Windows Defender, Windows Security Essentials, Spybot Search and Destroy, Spy cop, and a few others
Went and took ownership of the directory
Tried registry hacks
Altered AVG to exclude the (x86) directory
Re-installed AVG and MalwareBytes to see if I can repair the file
Shared the (x86) directory for everyone and inherited the permissions
Tried CLI restoring of default permissions
Tried to make changes in safe mode still shut down.
This is where I am now....waiting for a scan to end to reboot and check to see if I was able to make any progress.

"Windows cannot access the specified device,path, or file.You may not have the appropiate permission

We subscribe to a service called "Vault" which provies its documents in encrypted PDFs using the etd format. As well as Digitial Editions we have Acrobat Reader 9 installed on our PCs (Windows XP,SP2). When a user tries to download any of the documents they are seeing the following error:
"Windows cannot access the specified device,path, or file.You may not have the appropiate permissions to access the item."
However, if they open Digitial Edtions (or have had it open at some point in the past) before they download the document it opens without any problems. We use ZEN works to manage our PCs, and we use something called Dynamic Local User (DLU) which means that when a students logs into a PC the user's local Windows account is created on the fly, and then when they log out it is then deleted. This means that they are effectively using Digitial Edtions for the first time everytime they log into a PC.
As anyone else seen the above error? Also, is there a way of stopping it? What does Digital Editions do the first time it is opened? Are there registry keys that we can add, which emulates the opening of Digital Editions so it doesn't have to be opened first before we can download the Vault documents?
Any advice/tips would be most welcome.

Hi
Some required information are needed for us to help you.
Hi NabeelOmer,
We wonder if you have taken any action such as system restore after this issue occurred.
You might also try this command to restore your access control list.
Run this command to navigate to the drive letter, example is D
D:
To reset all permissions, run this command
icacls * /reset /t /c /q
Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
How to: Repair Visual Studio
https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
Regards
D. Wu

Windows cannot find \jre\NT\1.5.0\bin\java

Hello,
I searched google and found many documents and also tried 1-2 option posted on web but didn't succeed so last solution posting here.
Trying unsupported installation R12(12.1.1) on Windows 7-Professional 64-Bit.
System check succeeded without any trouble but with 33% installation, it gives above error(*windows cannot find \jre\NT\1.5.0\bin\java* ) and installation comes out.
The StartCD came with jre\NT\1.6.0\bin\java directory so i tried to rename the folder with 1.5.0 ( reference and also changed in Rapidwizard.cmd .
but now it doesn't throw any error but after 33% complete, it just exists without too much of information.
The log too had only this info after system check messages
RW-50010: Error: - script has returned an error: 2
I got following DVDs
oraAppsDB1
oraAppsDB2
oraApps1
oraApps2
OraAS
OraDB
startCD
and then i tried to create stage area from startCD but it failed as it was asking for a DVD which i didn't have because i tried every DVD i have.
So i manually created directories in stage area(StageR12).
Appreciate your response.
Regards!

user10569054 wrote:
Hello,
I searched google and found many documents and also tried 1-2 option posted on web but didn't succeed so last solution posting here.
Trying unsupported installation R12(12.1.1) on Windows 7-Professional 64-Bit.would suggest to go through this thread
How to install Oracle EBS R12 on Windows 7 (32-bit)?
I got following DVDs
oraAppsDB1
oraAppsDB2
oraApps1
oraApps2
OraAS
OraDB
startCD
and then i tried to create stage area from startCD but it failed as it was asking for a DVD which i didn't have because i tried every DVD i have.
So i manually created directories in stage area(StageR12).Refer earlier thread on similar topic
Stage creation for R12
thanks

Bridge to PS CC 2014: Error "Windows Cannot Find Photoshop CC" for PSD & TIFF files

Similar Messages

Maybe you are looking for