Bridge will not close and I cannot uninstall  it

I have re-installed CS5 and Bridge from my CD after a new Hard Drive fitting but now when I try to install my plug-ins I get message 'Please close Bridge.exe. before continuing but it is not open. I am running Windows 7.
I have tried uninstalling it from the 'Uninstall Programmes' list but it does not show up there, so I tried to uninstall CS5 but get the same message. I am sure that on my previous hard drive Bridge was listed as a separate programme but not now.
Can anyone help please?
Bridge works normally when I am using CS5.

Are you sure Bridge is not running in the background? Open Task Manager and have a look.
(If you specidfied to start Bridge at logon it won't stop running when you close the program)

Similar Messages

  • I installed Firefox today but it will not open and the icon on the taskbar will not close and I cannot uninstall it and the helper app does not work either?

    I have tried everything that I know to uninstall the new version of Firefox. I also installed Aurora beta and it had the same behavior and I was able to uninstall that. I cannot open a ff browser to work on it using much of your support information. I click on icon but it does not start on the desktop but task manager shows it as running. I have to end task in task manager to close it. I can't uninstall it and have tried system restore but that also doesn't work because of another issue with my antivirus program.

    If this is on a Windows computer, check this Microsoft link;
    '''''[http://support.microsoft.com/mats/Program_Install_and_Uninstall Fix problems that programs cannot be installed or uninstalled]'''''

  • HT6114 I am trying to upgrade to Mavericks from 10.6.8.  When it tells me to close all applications, Safari will not close and I cannot proceed.  What to do?

    I am trying to upgrade to Mavericks from 10.6.8.  It tells me to close all open applications.  However, Safari will not close and the installation cannot proceed.  Any suggestions?

    Either try to force quit Safari (press Command + Option + Escape keys and then choose force quit in the pop up window), or, you can also shut down the computer. Then boot up and open the app store application to download Mavericks - you don't need Safari for it.

  • Hi, i can connect to the internet but mail will not download and i cannot open webpage ?? please help

    hi, i can connect to the internet but mail will not download and i cannot open a webpage?? any ideas

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • The first tab will not close, and often does not load all of a page.

    When I open firefox, the first tab always has 'search bookmarks and history' in the address bar, instead of the url of my homepage, and it will not close.

    While trying to figure out a solution, I removed my themes and I closed the tabs I could, then clicked on the new tab button, doing so changed my original tab into an (Untitled) tab and created a new (Untitled) tab. I then found I couldn't close either tab, I clicked on new tab again, got a third (Untitled) tab, which again I couldn't close. I then closed Firefox choosing not to save. This appears to have fixed the problem; however I do not know which of the above action(s) resolved it.

  • The addons window will not close, and comes up with firefox

    I recently re-installed java, and when i opened firefox the add-ons window opened with it. the Add-ons window will not close without closing firefox, and turning the pc off, using ctr+alt+del wont work. any assistant will be greatly appreciated

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also "Corrupt extension files":
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

  • I tried to set up a remote desktop between my macmini and my work computer.  I hit cancel and now the Remote Desktop will not close.  I cannot shut down my computer either.  How do you close a non-responsive application.  I have tried everything!

    I tried to set up a remote desktop connection between my MacMini and my work computer.  It was not working so I hit cancel, but then the big black screen of death came up and will not go a way.  I cannot close my computer nor quit the remote desktop connection.  How do you close a non-responsive application?  By the way, I am new to Mac and it is not as simple as hitting the Control, Alt, Delete.  Please help.

    virginiafromphoenix wrote:
    .......How do you close a non-responsive application?.......
    Try ( alt + cmd + esc ).  Gives you a menu of running applications, and a chance to "Force Quit".

  • I have Creative Suite 6 Design & Web Premium installed on my HP Windows 7 laptop. All of a sudden Acrobat Pro will not open and I cannot reinstall. Get errors 2203, & Error-Install MSI payload failed with error 1603. Help.

    I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
    The error messages I get are:
    ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    Help PLEASE!

    Hi Patricia ,
    For error 2203 ,please refer to the following link.
    https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
    For error 1603 ,refer to this link.
    https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
    Let us know if this solves the issue .If required ,we"ll surely assist you further.
    Regards
    Sukrit Dhingra

  • Compressor 4 will not open and I cannot purchase an update

    Compressor will not open on my computer because " you cannot use Compressor with this version of OS X."  I am using OS 10.9.4. I cannot find a software update for Compressor but the App store offers a recent version to buy. When I attempt to buy it, it is says that  I "already have a copy installed. Choose Software Update from the Apple Menu to check for available update." It does not appear as a software update.  I am at a loss for a solution.

    So the App Store "sees" your copy of Compressor on your system. However, I don't know why you would also get the "cannot use" error. AFAIK, all versions going back to Compressor 3 should work.
    I would download an app called FCS Remover and use it to trash the app and related files.
    Then download and install a fresh copy.
    Russ
    PS: Here's the link.

  • Mail 6.3 will not close and won't open an interactive window

    A day or so ago I tried deleting about 4 messages off mail and then shut the app.  A note came up and stated the messages could not be sent to the delete folder and then proceeded to close the window but the application remained as opened.  I tried to quit the app from the dock but it wouldn't close it.  I then tried shutting the system down and mail stopped it from closing.  I have a Mac Book Pro with Mountain Lion 10.8.3 and tried to let the battery drain to let shut down that way to no avail.  I've tried opening another window in Mail but it won't open a functional window (preview screen will not display highlighted message).  How do I force a close or bring mail back to use it properly?

    Mac OS X: How to quit an unresponsive application using Force Quit

  • Adobe flash player will not load and run.  Uninstalled and reinstalled with no change.

    Adobe flash player will not load.  Uninstalled and reinstalled with no change. 

    Adobe’s advice regarding Flash Player 13:
    http://forums.adobe.com/message/6288659

  • Windows media player will not play and I cannot delete from library

    Windows Media Player encountered a problem while playing the file. This is what I get when I put a CD into play.
    It also will not permit me to delete a couple of cd's I copied into my library. And i cannot copy and burn cds'
    Any suggestions please? I have done a system restore with no affect. Thanking you in anticipation.

    Dazle, what is the model of your computer and which OS?
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Safari will not close and will not allow the computer to shut off. Problem?

    My safari program, which I haven't used since I bought this computer, will not shut down and then will not let me shut down my computer. What should I do?

    Go to the Apple Menu (click on the Apple icon in the upper left corner of the screen)......select (Force Quit) and shutdown Safari from there....and then shut the MacBook down.....

  • My Ipod will not charge and I cannot turn it on

    My ipod will not charge was working fine yesterday. I have connected it to itunes it up dates the softwre but once it has finished the unit turns itsekf off and will not charge.

    Plug it into the charger that came with the device and plug that into a known good wall outlet. If the battery is completely drained it may take an hour or more before the device shows some signs of life.

  • One of my webpages will not open and I cannot figure out why, can you help me?

    I need help with Muse one of my webpages on my website will not load. Please help me,

    Is that a 404? If yes, then check if you do not have the Export Page option disabled for the page in question in the context menu in Plan/Design mode. If that is not the case, then a URL would help in identifying the issue.
    Thanks,
    Vinayak

Maybe you are looking for

  • Program ID not registered

    Hi, I am trying to test RFC connection but it is saying  " program ID not registered"  at gateway. I  registered in saprfc.ini file at gateway but still its not working. Please let me know if you have any idea where should I register it. Best Regards

  • HT1364 Auto-save i-Tunes purchases to external drive?

    I have to use an external drive because my laptop (limited HD/RAM) cannot support my music library (too big).  When I purchase i-Tunes, how can I make sure they save to the external drive and not to the laptop?  I had it set-up when I first started u

  • Java.lang.NullPointerException while creating Communication Channel

    Dear friends First of all, I have already looked at many existing postings with java Null Pointer problems and also looked at the links that other users had suggested. It hasn't helped and therefore I am posting this question here. I am trying to cre

  • Time Stamp a Voice Memo to the Second

    I need to make a voice memo that's date and time-stamped to the second. It looks like Voice Memo doesn't do this (but if there's a way to, please advise!). Does anyone know an app that would do this? The greatest thing would be to be able to make the

  • Flex components not working after upgrade to Flash Builder 4

    I just purchased Flash Builder 4 and imported my project from Flex Builder 3. Everything worked except my Flex components that were created in Flash Professional using the Flex Compoent Kit are not showing up at all in my Flex app. The components wer