Bridge will not start.

Hi all,
I have Adobe Bridge CS3, Windows Vista ultimate 32bit. When I start bridge from the desktop shortcut, or in the programs folder I get this error message "The procedure entry point sqlite3_prepare_v2 could not be located in the dynamiclink library SQLite3.dll."
Any ideas?
Thank you
josel

Hi,
Yes done that, but the error message appears, I press the cancel button on the error message and bridge then loads up, but no preference screen appears.
Thank you once again
josel

Similar Messages

Bridge will not start in Mountain Lion

I originally had this problem with Lion but a reinstall of the system cleared things up. Now since installing Mountain Lion Bridge bounces once in the dock and thats it. There is not even a recognition there was a crash.

So, I've been having a problem very like this and perhaps can offer a bit of insight. At least I found what was going south for me.
My problem looked like this: Start Bridge and there'd be a flicker of a window followed by a dialog with "Bridge is unable to perform this action" (or words to that effect) followed by a crash.
After reading this thread I tried the previously-unknown-to-me OPTION start. That didn't fix the problem but it did eliminate the crash!
Interesting.
Now this problem began for me when I upgraded to Mountain Lion a while ago. After that my system began to become increasingly unstable. When I bought a large SSD to be my system volume I thought it would be a good time to do a clean install of everything.
That went well, actually. Bridge worked in the new account I created! Wonderful! But I needed to use Migration Assistant to bring over my old account which had existed, more or less unchanged, since OS X 10.0! But then I began to have the same kind of instability I had seen before: Finder crashing, Path Finder crashing, and Bridge not working although the other Adobe products including Lightroom 4 worked just fine.
So I poked around and here's what I found: different Groups. In older versions of OS X the user account was a part of group Wheel. This time it was a part of group Staff. Different group numbers. Hmmm. So I started at the top level directory of Users where all the accounts live and I changed the Group, recursively, to Staff.
And then Bridge worked fine and there were no more Finder crashes, at least until I shut down for the night.
So you might want to check both ownership, group and permissions in your accounts and see if this is a part of the probem.
Why Mountain Lion (or maybe even Lion) changed the assigned Group for new accounts I cannot explain although, as I was walking the critters tonight and gazing up at the just-past-full moon, I wondered if it isn't because OS X Server can be installed as a layer over ML and this is a part of that compatibility.
Now I do think that by changing the whole tree heirarchy I may have changed invisible files that shouldn't have been modified. But for right now I'll live with that and see what happens.
Now I just have to try to get Microsoft Office 2011 to install...argh!

Bridge still not starting in CS6 (extended)

Same issue; bridge will not start. As of this date, this is the second install of CS6. The first was a download and the second was from a disk. Bridge will not start ! I had Ps v 7 on here and that was removed as was the download copy. The problem is still here?!?

If you happen to be on a Mac running Mountain Poop (10.8.x) try re-installing the OS after you have installed CS6.
There have been reports that installing CS6 messes with some Mountain Poop files.

CS3 Bridge will not open on G5 quad and 10.5.2

Yesterday I installed 10.5.2 on my MacBook Pro and G5 quad. Once I got all my photoshop updates in order on the MacBook Pro both Photoshop and Bridge appear to work fine.
However, on my quad, which was up-to-date on Photoshop and Bridge, Bridge will not start up; it merely bounces on the dock for a bit and then even that stops and Bridge never opens up. Photoshop appears to be working fine.
On a Apple Mac forum it was suggested I look at version cue, but I do not want to go there without asking for more advice. I am afraid to make a big mess out of things.

Try asking in the Bridge forum.
Also see if it works in a new user.

Bridge CD5 will not start

I am unable to start Bridge CS5. After some weeks of using Photoshop CS5(but not Bridge) with no problems until I tried to open Bridge on my Windows 7computer. A bessage asked if I wanted to link HDR Efex 2 to Bridge which I accepted. Sine then Bridge has bee inaccessible.
I uninstalled Photoshop CS5 and reinstalled it, getting a message that it had been installed successfully but it wouldn’t run, neither would Bridge. A look in the Program files folder revealed only about two or three folders scattered between the PS and Bridge entries. Started the uninstall program again but this time only the Preferences were available so I selected those. Then I reinstalled Photoshop CS5, this time getting a fuill reinstall of Photoshop and and Bridge.
Photoshop CS5 opens normally, but Bridge will not, even if I double click Bridge.exe in Program Files\Bridge.
At no time have I been able to uninstall Bridge as it does not appear in the Control Panel listing of programs.
I am able to work on images in ACR by opening it through CS5. MiniBridge will open but I get a message saying that it is waiting for the full Bridge.
Any assistance will be appreciated.
Details:
Adobe Photoshop Version: 12.0.4
Operating System: Windows 7 32-bit Service Pack 1
Note: already submiitted today before I found the sign-in

Bridge is a part of PS so if you uninstalled CS5 you uninstalled Bridge also.
It appears you need to uninstall HDR Efex2 as it is a NIK plug in and don't see what it should do for Bridge.
Then unistall CS5, run the Adobe Script Cleaner and reinstall CS5.

Mac CS6 Bridge will not open

I know this has been discussed a lot on the forums and I have read all of those, but I am frustrated after 3 weeks of working on this. I bouht my wife Photoshop CS6 for xmas and loaded on our iMac running 10.8.2. She was running Elements 8. CS6 Bridge will not open. Get a message "operation can not be completed". It will also not open from inside Photoshop either. Following other posts, went into Library and deleted switchboard folder, plist files, and other listed files. Did an option start on CS6 and reset to factory, delete thunbnails. Performed PRAM and disk permissions repair. None of this has fixed the problem. The only thing that works is creating a new user account. Bridge opens fine in my test account. Next step is to make test account the main account; however, this is going to be a pain. Any other ideas before I undertake this?

Looks like you have tried all the suggested methods, so good job on that. Your solution to create a new account is one that has worked for many where nothing else has worked. This usually means some permission or default setting has not been affected by your actions.
The only suggestion I can offer is to uninstall CS6, run Adobe Script Cleaner, then reinstall. Hope this works.

Bridge will not open in CS6

I'm using win7 with plenty of memory. I had PS CS and upgraded to a complete new version of cs6 extended. I loaded it and the ps program works fine. However the Bridge program will not start. I've tried both programs even from the exe file and nothing. It will not run. Any help out there?

Bridge General Discussion

CS3 Bridge will not launch tried 'ctrl' icon doesn't work.

Adobe Bridge has encountered a problem and needs to close. We are sorry for the inconvenience.
this is the message I get when i try to launch Adobe Bridge -
I called tech support & although I've spent $$$ for master collection CS3 - and so many other adobe programs/software for myself & others.. they are unwilling to offer any support other than a paid issue, which really chafes.
so here I am, throwing seeds into the wind hoping i can get back to work after wasting a nother day with this this.
there is no phantom instance of Bridge.
I have a wacom tablet. I cannot get to any 'preferences' screen with any combination of ctrl, alt, ****..
Bridge will not launch.
Help please? thanks

Curt Y answered this in another thread;
If you can not get the reset window, you are doing something incorrectly.
1. Bridge has to be closed. Check the Task Manager to make sure no copy is running in the background.
2. You have to press and HOLD the Crtl key when you click on the start icon for Bridge.
3. If successful you will get a reset window with 3 options.
in this thread;
http://forums.adobe.com/message/2735898#2735898
the key point is step 2 HOLD... this is nowhere else in the forums..
so, again, thanks to Curt Y for the answer/
I checked all three boxes & Bridge did launch. Why is this so obscure.. and why could tech support just tell me that..
oh well.
again. thanks.

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

When restarting server after a crash, Messaging bridges are not starting

Hi,
We have Messaging bridge configured with Exactly-Once QOS to read messages from IBM Websphere MQ to Weblogic distributed Queue. We are using Weblogic 10gR3.
1. We killed the weblogic server which was reading message from source destination(IBM MQ). We did this to check whether any message is lost when a server crashes.
2. Then we restarted the weblogic application server and checked the weblogic messaging bridge status.
3. The messaging bridge was not started properly and the following Exception was thrown.
####<Apr 22, 2010 4:09:11 PM BST> <Error> <MessagingBridge> <machineA> <desb03-ms11> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-056A9014D88E2BE368B7> <> <12312323333> <BEA-200015> <An error occurred in bridge "BRIDGE" during the transfer of messages (javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:941)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:630)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1116)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:275)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:511)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:438)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy87.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1427)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1002)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1079)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.).>
####<Apr 22, 2010 4:09:11 PM BST> <Warning> <MessagingBridge> <machineA> <desb03-ms11> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271948951881> <BEA-200026> <Bridge "BRIDGE" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.jms.bridge.internal.MessagingBridgeException.)>
####<Apr 22, 2010 4:09:12 PM BST> <Info> <MessagingBridge> <machineA> <desb03-ms11> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271948952726> <BEA-200020> <Bridge "BRIDGE" is stopped.>
Please give your suggestions to fix this issue.
Thanks!
Edited by: user11340353 on 28-Apr-2010 06:34

Hi,
*The server was started in warning mode and the JTA was declared unhealthy. I saw 2 transaction alive for more than 2000 seconds which is uncommon.
*The resource adaptor was started properly.
*We are using file store. But will it make a difference?
Thanks!

Bridge will not launching on PS CS4

I have windows XP. Bridge will not launch for CS4. We have tried to restore to a previous version, uninstalled and installed the program. Restored the previous versions of my plug in software. Bridge still wont launch. I can still gain access to my images through the control on the dropdown menu to open. Bridge is just a lot faster and more convenient. If anyone has any suggestions are can help that would be greatly appreciated. Thanks

Bridge CS4 has a Open at login option where it will open when you launch Windows. It will be in the system tray.
In Bridge:
Edit>Preferences>Advanced, "Start Bridge at logon" then restart Windows.
If that fails see if anyone in the Bridge forum can help. Bridge General Discussion

Adobe Bridge will not show items in subfolder even when this option is checked.

Adobe Bridge will not show items in subfolder even when this option is checked. It works on one computer but not the other-both working on the same system/ version of adobe cc.
How can I fix this bug?

Check to see what is different between setups. You may want to reset prefences in the balky computer.

System PI 7.11 will not start because of R3INLPGM error

Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE      Information                 XXXXXXX SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                     From module . . . . . . . . :   O4TMKLIBIX
From procedure . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
To module . . . . . . . . . :   O4TMKLIBIX
To procedure . . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
                                     R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
Matthias

Hello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Bridge will not start.

Similar Messages

Maybe you are looking for