Bridge won't load.

CS6 including Bridge works fine on my laptop, but Bridge won't load on my desktop.  Can someone please let me know why Bridge won't load.

We cannot tell because we know nothing about your system.
Mylenium

Similar Messages

  • Bridge won't load on my computer: Mac OS X version 10.6.8

    I have no clue to what all this means, quoted below, maybe someone can help me out with this one? @
    "Adobe Bridge cannot be loaded because of a problem"
    Process:         Adobe Bridge CC [2117]
    Path:            /Applications/Adobe Bridge CC/Adobe Bridge CC.app/Contents/MacOS/Adobe Bridge CC
    Identifier:      com.adobe.bridge6
    Version:         ??? (???)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [1239]
    Date/Time:       2014-06-26 10:58:05.315 -0400
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          1186656 sec
    Crashes Since Last Report:           6
    Per-App Crashes Since Last Report:   3
    Anonymous UUID:                      5CFA9AA9-4C4E-4A2E-87B3-2D534EC1B483
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /usr/lib/libcurl.4.dylib
      Referenced from: /Applications/Adobe Bridge CC/Adobe Bridge CC.app/Contents/MacOS/../Frameworks/dvanet.framework/Versions/A/dvanet
      Reason: Incompatible library version: dvanet requires version 7.0.0 or later, but libcurl.4.dylib provides version 6.0.0
    Binary Images:
        0x7fff5fc00000 -     0x7fff5fc3bdef  dyld 132.1 (???) <69130DA3-7CB3-54C8-ABC5-423DECDD2AF7> /usr/lib/dyld
    Model: MacBookPro5,2, BootROM MBP52.008E.B05, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.42f4
    Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: APPLE SSD TS256A, 233.76 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS21N
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0x04600000 / 3
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2
    USB Device: USB-PS/2 Optical Mouse, 0x046d  (Logitech Inc.), 0xc01b, 0x06200000 / 3
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8217, 0x06110000 / 4

    I believe I am having this same problem. Just updated Bridge today and now it won't open.

  • How do I fix my animation presets for text that won't load? It seems to get locked in loop and I am forced close Adobe Bridge.

    How do I fix my animation presets for text that won't load? It seems to get locked in a loop when I click on one and I am forced to "fore close" Adobe bridge which After Effects uses to locate the presets. Any help would be appreciated. Thanks.

    What is your exact workflow? The proper procedure is to select your text layer in AE, find the text preset you want to use, then drag or double click that preset to apply it to your project.
    It also helps  if we know your version of AE and OS down to the decimal point. You didn't give us much to go on.

  • Photoshop won't open my raw files and Bridge won't show thumbnails

    Hi,
    I'm having trouble with my Photoshop CS6 and Bridge CS6 on my Mac. It's been working fine until a few days ago, but now the image thumbnails won't load in Bridge, and I'm not able to open RAW-files in Photoshop (same thing happens when opening both from Bridge or in Finder).
    When trying to open the files in Photoshop a pop up message shows up saying this:
    "Photoshop cannot open this file.
    If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help > Updates.
    If the problem persists, visit the following link for more information:
    http://www.adobe.com/go/kb407111"
    I'm not able to click on updates, so that won't help me much. What can I do to get it back to normal again?

    I do not use a Mac but Windows as delivered from Microsoft does not generate Thumbnails for RAW files or even Photoshop Files like PSD  in order to seen the in Windows UI like Windows File Explore (Mac Finder) or in File Open and selection Dialog one needs to install some windows add on.  I use FastPictureViered Codec Package,  When installed on Windows I can have the thumbnails your looking for.  Perhaps You need some Mac add on or Apple Update the see thumbnails for RAW files. I see things like this on the web Digital Camera RAW Compatibility 4.06

  • Bridge won't open raw files from my canon mark iii

    Bridge won't open raw files from my canon mark iii?  Are you kidding adobe? This camera has been out for over six months. Why isn't it loaded into the program? This camera is sooo main stream!

    What Mark III?
    Are you referring to the Canon EOS 1D Mark III or the Canon EOS 5D Mark III?
    And what version of Adobe software are you referring to?
    There definitely is support for the EOS 1D Mark III in in versions of the Creative Suite dating back several versions. Support for the EOS 5D Mark III was made available in an update to Creative Suite 6 and Lightroom 4.x.
              - Dov

  • (SOLVED)Farmville 2 won't load

    Anyone on here play Farmville 2? I have tried multiple times and many different solutions, but I have yet to find out why Farmville 2 won't load. It loads halfway, then stops. I can run the game in Linux Mint, so I'm wondering if there is just some file that I'm missing to run the game. I have installed flashplayer from the repositories, as well as pepperflash from the AUR. Nothing seems to work. It doesn't work on Firefox, either. I have just done a full system upgrade, but nothing related to flashplayer or video drivers were updated. Oh, yes, I'm running the Intel video drivers on my system. I have tried running the Catalyst drivers, and EVERY time I do so, I end up with a blank screen and I have to do a reinstall to fix it. Any help would be appreciated!!!
    Last edited by horsemanoffaith (2013-09-09 00:29:34)

    Let's see if this works!
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
    00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
    00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
    00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
    00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] (rev ff)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
    0b:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02)
    Woo hoo!!! I figured it out all on my own! Here you go!

  • Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

    Specs:
    iMac 10.8.5
    3,4 GHz Intel Core i7
    32 GB 1600 MHz DDR3
    Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
    I tried restart my iMac and when I was logged back in, my dock preferences were reset.
    Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
    I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
    It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
    When I tried opening it, it said the file was damaged and could not be openend.
    I tried opening it with AE or importing the file in a new project but nothing helped.
    When I tried looking for autosaves, this is the really weird part, there were none.
    Even though there are autosaves from my other projects, this one was completely gone.
    It looked like the day before never happened on my computer.
    Also when I openend Premiere all the recent projects had been wiped.
    So at first I thought it was a Premiere Pro failure.
    But than, later on the day, I tried loading some RAW files from my compact flash card.
    This is where I would get an error (error -36) which said some data cannot be read or written.
    I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
    But when I tried moving the files to an other folder the same error occurred.
    While dealing with this issue I wanted to put on some soothing music on youtube.
    This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
    When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
    I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
    I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
    On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
    Just like my system preferences, all the preferences I had with Chrome where also reset.
    Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
    To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
    Some background info which could be helpful for solving this mystery:
    two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
    I got it replaced by a qualified apple repair store.
    When I got my computer back, all the files where gone.
    I got on the internet without AdBlock installed yet.
    A game or whatever it was, can't clearly remember, got installed by accident.
    I deleted it immediately.
    Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username. 
    So I brought my mac back to the store.
    Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
    I asked him; could it be a virus? He replied no way.
    I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
    So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
    PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
    Could this be the work of a virus or a malware? Or is it a disk permissions issue?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Tried to install OSX Mavericks now MBP won't load

    Hi all
    Last night I tried to install OSX Mavericks on my MBP mid-2010 running Mountain Lion. It downloaded fine and then seemed to install fine. When the message came up saying it was going to restart automatically the spinning wheel hanged, which was the first problem. I switched off the MBP and turned it on again. It now refuses to boot up and stays on the Apple bootup screen with the spinning wheel.
    I've tried to restart in recovery mode but this doesn't seem to work. It just goes back to the spinning wheel and there is no progress bar that pops up to indicate the recovery data is being downloaded from the net (I don't have a recovery partition).
    I have a backup external hard drive that I can use to restore my MBP and then try upgrading again, but I can't use that until I get into recovery mode.
    Is anyone able to help?
    Thanks

    Ok so I worked out how to get into recovery mode. Turns out I was doing it wrong! I used an external USB drive to access recovery mode.
    I ran disk utility which identified and fixed some errors on the HD. I thought this might solve the problem but when I restarted the same problem occurred. I then restored my time machine backup which thankfully worked.
    I tried installing mavericks again! Upon restarting and completing the install, I got the message 'OSX has been installed. Your computer will now restart'. After the countdown had finished I got the beach ball which span eternally again, just like last time. After about 10 mins I did a hard reset and again OSX won't load.
    Lame...

  • My iPhone 5c won't send iMessages, snapchats, email from the Mail app, and it won't load YouTube. Other internet apps like Pandora and Instagram work fine though. Any suggestions on how I can fix this?

    A couple days ago I first noticed the problem when snapchats would appear on my lock screen but when I opened the app I kept getting the error message that the app was not able to refresh my story. Then the next day I was no longer able to send iMessages, they wouldn't go through and would only reach the second party when I sent them as text messages. Also, YouTube won't load and Mail won't send or receive email. I've already tried restarting my phone but there was no change. At first I thought my network connection was the problem but Instagram, Safari, Vine and Pandora all work perfectly. Any suggestions?

    Try this procedure to be sure of a proper restart.
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
    I would also try: Settings > General > Reset > Reset Network Settings

  • Can't log in - desktop won't load

    Hi, and thanks for reading this. I hope someone here can help me.
    I have a G4 flat-panel iMac, running 10.2.8. Bought brand new in 2002 and have had no problems, with the exception of the hard drive going out a few months later and replaced under warranty. (Apparently a few of the dual-boot machines had this problem.) They also upgraded the OS to 10.2.8 and the computer has run beautifully ever since. Until the other night.
    I was online and the modem disconnected but Internet Connect kept displaying "Disconnecting". This happens on occasion and the only way out of it is to shut down the computer and restart. So I did, and when the computer restarted I could not log in. The computer started as usual and seemed fine, the log-in screen appeared, I entered my password, the computer said "logging in", a blue screen appeared briefly... and then kicked back to the login screen. The desktop never appeared.
    After several tries of that, I decided to reset my password (with the system CD). It let me reset my password and the computer recognized the fact I had changed my password. (You know how the log-in screen "shakes" to signal a wrong password - that never happened.) I tried to log in again and it said "logging in"... and returned to the log-in screen. The same thing happened when I tried the root user account.
    I was able to start up from my Norton CD and changed the startup disk to 9.2. In 9.2, I can see the contents of my hard drive including my User folder in OS X and everything that had been on my desktop in OS X is right there in the "desktop" folder for my user name. I can move, copy, and delete things there. It's all there; the desktop just won't load when I start in OS X.
    I don't know if it helps, but in 9.2, the computer recognizes my ZIP drive, CDs, and my Wacom tablet and mouse.
    I have gone through the discussion boards and articles here and cannot find where anyone else has had the exact same problem. I have tried the possible solutions below, and none of them have changed anything:
    * Norton Utilities (Disk Doctor) - fixed some minor errors, then ran it again and no problems were found.
    * Safe Boot - I couldn't get the mouse to work, and when I figured out the keyboard "shortcuts" to log in, I got the same thing as before... "logging in" and then getting kicked back to the log-in screen.
    * Disk Utility (from the Mac OS X install CD) - it fixed a couple things then said that my hard drive appeared to be okay.
    * fsck (single-user mode) - it said that "Macintosh HD appears to be OK". So at least the hardware seems okay.
    * Rebuilding desktop - a long shot but I figured it was worth a try; nothing changed.
    * Reset privileges (single-user mode) - as far as I can see, nothing changed even after doing this.
    * Startup items (folder) - nothing seems out of place.
    * Disable log-in items - I still couldn't log in
    * In single-user mode: when trying one of the suggestions from an article here, I typed "cd/Users/{my user name}/Library, then mv Preferences Preferences_old, and received a message stating "no such file or directory."
    Looking through the contents of my hard drive, I can see that there is a Desktop icon for OS 9, but not anything for OS X. In theory, shouldn't there also be a desktop icon for OS X? Has my computer somehow lost its "connection" or "map" to my OS X desktop? I ran fsck again today so that I could look at logs/parse failed/plist/etc (an article I found here on apple.com) and following those steps, I noticed there was a line that said "root device is mounted read-only." So I can only assume that has to do with the fact my OS X desktop doesn't load.
    So, with all that being said (it's a lot, I know, and I hope it all makes sense) ... Is this problem something simple that I can fix myself, or do I need to take it into the shop and have a technician look at it? As you can imagine, this is all getting very frustrating, with limited access to an old version of Photoshop, SimpleText, and a very old web browser that only works on a few sites (and thankfully Apple.com is one of them). I miss my OS X.
    Thanks again for reading this, and for any advice/assistance you may be able to provide.

    Thanks, Anna. Excellent work. Everything seems fine, except, of course, the booting OS X part.
    First try Resetting the PRAM
    • Shut down the computer.
    • Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
    • Turn on the computer.
    • Press and hold the Command + Option + P + R keys immediately after the startup chime.
    • Hold keys down until you hear the startup chime for the third time.
    • Release the keys and immediately and allow computer to boot.
    The fact that you can boot in Safe Mode suggests that you may have a Login item that conflicts with the startup process. If resetting PRAM does not work try this:
    Boot computer in Safe Mode.
    If you are able to get into the Login items (Apple Menu > System Preferences > Accounts > Login Items) make a note of all the log in items (write it down). Then delete them all by selecting each one in turn and clicking the minus sign under the list. Shut down and try booting the computer normally. If you are able to boot successfully add the Login items on your list one by one and try rebooting each time you have added one. This should help you isolate the offending item.
    I hope one of these methods works. Post back and let me know.
    cornelius

  • I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my do

    I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my documents

    I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

  • I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
    Thanks in advance.

    u87 wrote:
    Thanks for the reply.  This at least tells me that going back to LV2010 is not likely to solve the problem.  The missing dll's are:
    MFC90D.dll
    MSVCR90D.dll
    IESHMS.dll
    WER.dll
    And, once again, IESHMS and WER have other dependencies.  So perhaps i need to install the Visual C++ development environment.
    IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
    WER.dll is Windows error reporting for Vista/Win7.
    MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
    So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
    What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • My weather app won't load

    My weather app won't load, I type in my zip code and it says it cannot be found and says unable to load.. How do I make it load?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to settings>iTunes and App stores and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
    ArealDJ wrote:
    I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

  • My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    My iPhone will
    not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    Try resetting your network settings.
    Settings>Genenal>Reset>Reset Network Settings.

Maybe you are looking for