Bridge won't open my NEF files

I updated my MAC OS to Yosemite and now Bridge won't open NEF files from my Nikon D7100 SD card.  I have updated Camera Raw to version 7.1 and am running Photoshop CS6

You need at least 7.4
Camera Raw plug-in | Supported cameras

Similar Messages

  • Full registered cs6 won't open d800 nef files (win7)

    full registered cs6 won't open d800 nef files (win7)

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Ask specific questions in the ACR/ PS forums.
    Mylenium

  • CS won't open my NEF files taken on my Nikon D3100.

    I have CS and have no problem openning my nef files taken with my D70. I just bought a D
    3100 and the NEF files will not open. I get an error saying it's not the right file type. Does anyone know
    why this is happening and what I can do to fix it?

    I found out the hard way, that I had to see if I had the latest version of the camera raw, which is for the cs. Odds are that your version is not support, you will have to go the dng route or you will have to upgrade your software to the latest version.
    http://owlinks.com

  • Elements 6.0 won't open RAW *nef files from Nikon D40 - help!

    I tried to open *nef files from a D40.  Even though I selected RAW files in the open file menu, AE6 gives me an error message and won't open the files.
    How can I get these files to open with AE6?

    Hmm, that usually indicates that you need to get a newer version of the Adobe Camera Raw plug-in.  But according to this tech note:
    http://kb2.adobe.com/cps/407/kb407111.html
    the D40 needs at least ACR 3.7.   PSE 6 ships with 4.2, so you should be able to open them.
    I suggest following the troubleshooting steps in this tech note, which will likely have you update your ACR:
    http://kb2.adobe.com/cps/407/kb407110.html

  • Bridge won't open files

    I work on a Mac and recently upgraded to Yosemite.  I hate it.  It is way too slow.  Now Bridge won't open my files.  I have purged the cache several times and it just gets worse and worse.  Any suggestions?

    Problem solved.  I reset the preferences and it is working better than ever.  Must not have Yosemite's fault.

  • Bridge won't open raw files from my canon mark iii

    Bridge won't open raw files from my canon mark iii?  Are you kidding adobe? This camera has been out for over six months. Why isn't it loaded into the program? This camera is sooo main stream!

    What Mark III?
    Are you referring to the Canon EOS 1D Mark III or the Canon EOS 5D Mark III?
    And what version of Adobe software are you referring to?
    There definitely is support for the EOS 1D Mark III in in versions of the Creative Suite dating back several versions. Support for the EOS 5D Mark III was made available in an update to Creative Suite 6 and Lightroom 4.x.
              - Dov

  • Can't open d90 NEF files in CS3 or bridge. Any ideas?

    I have recently upgraded to a Nikon d90 and i can no longer open any NEF files in photoshop or adobe bridge. Any ideas pleAse? Thanks

    Hello, according to http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html, the D90 is supported by ACR 4.6 that works with CS3. Is it the version currently installed? (check in about>plug-ins)

  • Elements 10 won't open a nef(raw) file?

    I downloaded photoshop elements 10.Uptated it.It still won't open a nef(raw) file.It just said it is the wrong type of file?What do I have to download to open and edit this type of file?

    You will need to wait for the next camera raw update. You have two alternatives:
    (1) Use Nikon software to convert. (2) Download and install the free Adobe DNG converter to convert your NEF files to the Adobe Raw format and the files will open in all versions of PSE (keep your original NEF’s as backups and for use in Nikon software)
    Windows download click here DNG Converter 7.1
    Mac download click here DNG Converter 7.1
    You can convert a whole folder of NEF images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Bridge won't open-mac

    I just reinstalled CS3 and Photoshop works fine, but bridge won't open. The icon bounces and the dock indicates it is open and force quit is necessary to clear the dock below the icon but bridge won't come up. I updated when I reinstalled, btw.
    Do I need to reinstall again?

    Hold down the Option key as you launch Bridge, then click the boxes in the dialog box that appears.
    Routine maintenance is imperative.
    I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
    I have seen software installations go sour because the installer did not find everything as and where it should be.
    I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
    This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
    Repairing Permissions after the fact (i. e. not immediately before and after an install) seldom helps.; Try it anyway, though.
    ====
    Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
    Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
    If you don't run them, you WILL run into trouble, sooner rather than later.
    Here's an excerpt from the Apple tech doc
    http://docs.info.apple.com/article.html?artnum=107388
    Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
    Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
    Also, from:
    http://docs.info.apple.com/article.html?artnum=106978
    The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
    NOTE:
    There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
    = = =
    If you have DiskWarrior, run it regularly too.

  • Can't open D90 NEF files in Camera Raw CS3?

    I've downloaded the latest version of the plug-in, and it works perfectly when opening JPEGs. However it won't open my RAW files, it says they're not recognised?

    Unless it is listed in the ACR 4.6 compatibility list (in which case there is some other issue), the D90 came out after CS3 was obsolete so Adobe did not update the obsolete Camera RAW plug-in and only added D90 support to the current ACR plugin which comes with CS4.
    If you want to open D90 files in an older version of Photoshop you can download the latest DNG Converter from Adobe's website, which will recognize the RAW files, and convert the NEFs to DNGs and then open those DNG copies in CS3...or update to CS4 (or wait until Spring and update to CS5--just a guess since the LR3 beta expires 4/30/10).

  • DNG conversion fail and Photoshop will not open my NEF files (Newbie question)

    Two part question. First, I just recently installed photoshop CS4 to my (windows vista) computer and I go to upload NEF photos to bridge and I check the box that says "Convert to DNG" and when it finishs uploading it says "Files successfully copied, However, DNG conversion failed." It says it everytime and I don't know what to do about that.
    Second part: I try to open my NEF files in photoshop it says "Could not complete your request because it is not the right type of document." I am using a Nikon D90 and I don't know if that has anything to do with this. I apologize if this question is in the wrong forum, I am new to this and I thought maybe camera raw had something to do with this at least.
    Thanks for any help

    You need to update your Camera Raw plug-in to either version 5.2 or 5.3RC, as well as the new DNG converter. They are available on the Adobe download page, and there are complete instructions for installation available there.

  • How to Install Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera

    I need someone to walk me through how to install a Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera.
    I haven't used photoshop in ages and I got a new camera. I have been on the phone with Adobe (no help) and spent a couple of hours online trying to figure this out. I'm confused, frustrated and about to throw my computer out the window.
    Also, I placed this in the "Photoshop for Beginners" since Photoshop CS5 doesn't appear anymore. I know CS5 is outdated but I spent hundreds of dollars on this program and you would think adobe would still honor its product.
    Any guidance is much appreciated.
    AJ

    Odds are cs5 is too old. If you do a search on my the main Adobe website there is a list of compatible cameras for the last known update to camera raw for cs5.
    Each version of Photoshop only gets so many updates for camera raw then it is necessary to upgrade Photoshop to get the next update for camera raw.
    So you currently have 4 choices.
    1 upgrade Photoshop
    2 get Lightroom - latest version
    3 get Photoshop elements -latest version
    4 get dng converter - this will download the latest version an is the only option that is free.
    The dng converter can be found by searching Adobe website.

  • Cannot open my NEF files in Photoshop CS6 from my new Nikon D800 camera.

    That's it, I Cannot open my NEF files in Photoshop CS6 Camera Raw from my new Nikon D800 camera. What am I doing wrong or what is wrong? I have the plug-in Camera Raw 7. and can open TIFF files but not the NEF files.
    Peace,
    Charles Fennen

    Hi ssprengel,
    to explain the scenario, i am basically a D7000 user and I do post production with Windows computer. But for an assignment I have hired D800, they have provided me their SD memory card. I have used the same memory card while shooting.
    I have transferred the NEF files from the camera using Nikon software. The transfer was successful but i am not able to open the Raw NEF file with ACR. Even my plugins are updated till date.
    The NEF thumbnails are having small lock logo in the bottom left corner. I do not know what does that mean. Like this.
    Kindly let me know what would be the prob? if my RAW files are corrupted kindly let me know how will I recover them?
    Thank you.

  • Is there a way to restore photos from Drop box to my desktop iPhoto in a large batch instead of one at a time? I tried and a zip file was downloaded but won't open. Says file format not recognized.

    Is there a way to restore photos from Drop box to my desktop iPhoto in a large batch instead of one at a time? I tried and a zip file was downloaded but won't open. Says file format not recognized. I see how to do it one at a time with the "download" button in Dropbox but that's so cumbersome for lots of photos.

    Have you tried these avenues?
    Contact us - Dropbox
    Dropbox Help Center
    Dropbox Forums
    Submit a help request - Dropbox
    OT

  • Adober Reader suddenly won't open any PDF files (Mac)

    I had an old version, I downloaded the latest one, upgraded to the newest, even tried taking that one out and downloading an older version. It doesn't matter which version I seem to have, it won't open any pdf files from the web.
    I use a Mac, and Safari. It used to always load PDF files fine, one random place said I had to update it so I did and since then, lately it'd crash and close all Safari windows when loading a PDF or trying to copy something from a PDF. The smart Mac message I have says it could be related to an Adobe Plug in. However, now it won't even load PDF files at all, it always goes to a white page. Nothing happens.
    What do I do?? I can't even save the PDF's as individual files and view then in Preview as an alternative option. It's a link online and normally would work. What happened??
    HELP!
    I have a Mac OS X Version 10.5.8
    I've always used Safari, it's Version 5.0.5 (5533.21.1 if that means anything).
    Acrobat Reader, currently an old version 9.4.0 download. BUT, I had also the 10.0.1 version which also doesn't work. When I had that 10.0.1 version and checked for updates, there was an update (.3 I think?) and I did that and that also doesn't work!
    Why did it suddenly stop working?
    What can I do to fix it ASAP?
    Only with 9.4.0 version I can go to Help and "Repair Adobe Reader Installation" - I click that and the only box I can select is "Adobe PDFViewer Safari Plugin - View, fill-in and collaborate on Adobe PDFs within Safari"  - I click continue and it tells me there's "No missing components detected. Repairs are not needed." The only option is to click "OK".
    With any newer version of Adobe Reader, under Help there is no option to "Repair Adobe Reader Installation". So... I can't even try that with a new version.
    I am at a loss for solutions. Hope someone here can help! Thanks!

    There are several things you can do. My first step would be to repair permissions. If that doesn't work log on as a different user. If all works properly then you have a corrupt preference file (most likely) or a corrupt user font installed in your user Library (less likely). If that doesn't work download Applejack. Have it repair the disk, remove all system caches and user caches. Then have it check all system and user preference files. Remove any preference files that are corrupt. Reboot and see if your system is working properly.

Maybe you are looking for