Bridged / Roaming wifi network not functioning properly

Hello all,
I have a problem with my roaming network, and cannot seem to figure out why.
Setup:
1 new ac Time Capsule
1 new ac Airport Express
Connected via Powerline (Ethernet) in two different rooms
The two machines are set up correctly (at least I think so): DHCP, Bridged Network, same SSID, WPA2 and security settings, different channels.
Problem:
When I move from TC wifi coverage to AE wifi coverage (in my house), my wifi drops out (weirdly enough, if I click on the wifi symbol at the top, it is grey / no wifi or internet connection, but there is a tick infront of my wifi network name).
To get back wifi connection, my only solution is to de-activate and re-activate my wifi. Then I am connected again.
When I move from AE wifi coverage to TC wifi coverage, I do not have this problem. Then the transfer works flawlessly.
What can be the problem, any ideas?
Thanks!

Problem solved:
- Factory Reset the TC and AE
- Deleted the wifi network from my list of known networks
- Deleted the relevant network passwords and settings within the Keychain
- Restart and reconfigured everything.
Now it works-

Similar Messages

  • My iPhone 4s WiFi is not functioning properly

    From the last few months, there is a persistent problem with my 4s. I'm unable to connect to any WiFi network unless i'm within 1 meter from the router.
    If i'm any farther than 1 m the phone is repeatedly asking for password(even the correct password is given ). What do I do? Anyone help..

    Hi Turn your Router off for 30seconds When it's back on Go to settings on iphone Reset Network settings You will need to enter your Router wireless key. This may help. Also later check your Router make on website check for any Firmware updates. Cheers Brian

  • Bluethoot and Wifi is not working properly in my apple ipad air

    Hello sir,
    I m having apple ipad air with serial no: DM*****4HY and i m facing problm with my bluetooth and wifi. Both is not functioning properly. To solve this i have done Factory reset ang setting reset both. But even after doing this my problem of bluetooth and wifi didnt solved.
    <Edited by Host>

    should not post serial # or any other identifying info. Have asked the Hosts to remove.
    meanwhile, verify iOS 7.1.2? Is the problem NEW? If so, what has happened recently regarding update/upgrade/new software?
    CCC

  • Wifi is not working properly once i updated to the new operating system.

    My I pphone 4s wifi is not working properly once the softwere is updated to the new IOS.
    It shows the wifi but when selected its says "unable to connect". I tried connecting to many wifi networks but gives the same error message.
    Kindly advice how to rectify this

    I am trying that and itunes says that you have to have icloud backup off. My icloud "button" is a whiteish green and does not respond to touch. I can't turn it off.

  • Satellite P300D-110 integrated webcam is not functioning properly.

    Hello everyone,
    as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
    Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
    *How did this happen?*
    You tell me. This is how it went;
    * Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
    * Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
    To give a quick summary of the thread;
    * Using Camera Assistance Software provided by Toshiba I can take pictures.
    * Using Camera Assistance Software provided by Toshiba I can record sound.
    * Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
    * I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
    * I have downloaded and isntalled the latest drivers from the Toshiba website.
    * My laptop is about a week old.
    I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
    And if possible WITHOUT having to reinstall Windows Vista Home Premium.
    I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
    Sincerely,
    a sad customer.

    Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
    Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
    Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

  • The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

    The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

    OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
    1. Powered off my MacBook and removed everything connected except for the power chord.
    2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
    3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
    Just added another couple of years usage with my aging mac :-)

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • HT1665 Bluetooth on my IPhone 3GS seems not function properly

    Bluetooth on my IPhone 3GS seems not function properly. How to check and rectify it.

    It would help if you explained what you mean when you say it doesn't function properly. What are you attempting to do? What happens when you try? What troubleshooting steps have you already taken?

  • Why do QTVR interactive images do not function properly or at all?

    QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
    http://www.edfruinphotography.com/MILLCITY_2.html

    I have Safari 5.1.7. I am using Mac Snow Leopard.
    That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
    You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General.

  • Click and Drag in OS X Yosemite 10.10.3 is not functioning properly on desktop folders

    The click and drag on my Mac 10.10.3 is not functioning properly.  It won't allow me to click and drag folders on desktop or dropping them into emails.  Thought I looked every where for solution....... Any input would be appreciated.....Thanks! 

    Select
              View ▹ Show View Options
    from the Finder menu bar. In the dialog that opens, select
              Sort by: None

  • Why are my firefox icons and tabs not functioning properly?

    My firefox is not functioning properly since Monday. I have tried uninstalling and installing firefox but the problem is still there when I open it. Please help.

    Unfortunately, the most likely explanation is an incompatibility with your graphics card/chipset driver software. One of the effects of Safe Mode is to disable Firefox from using hardware acceleration. To turn that feature off in normal mode as well:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    This takes effect the next time you exit Firefox and start it up again. Any difference?

  • My iPad is not functioning properly, I want to restore it. but I'm unsure if my Minecraft world will be saved in the backup

    My iPad is not functioning properly, I want to restore it. but I'm unsure if my Minecraft world will be saved in the backup. Please help, I need to use it ASAP

    How to BackUp
    http://support.apple.com/kb/ht1766
    See iTunes will backup the following Information  Here...
    http://support.apple.com/kb/HT4946

  • Cropping tool does not function properly in Photoshop CS3

    Cropping tool does not function properly in Photoshop CS3. Always crops to .004" x .004". Tried reinstall with no luck. Any fixes out there?

    Reset the tool by right-clicking on the crop tool drop-down/fly-out menu in the top options bar (big crop tool icon above the tools panel, when the crop tool is selected). Be sure to check there aren't values in the crop tool by hitting the clear button in the options bar.

  • HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen.  Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

    The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen.  Any suggestions on to hoe to fix this?  The software has been updated to iOS 5.1.1, and no furthe updates are available.

    This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
    Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • One or more of cells in the battery are not functioning properly?

    one or more of cells in the battery are not functioning properly
    I assume this means I need a new battery?  This was the message I got when I did the battery check.  
    The battery will not charge.  Laptop just runs on AC power and battery is in but will not charge.  What happens that causes cells in battery to not work?  I did leave it off a few months.  Would take make the battery go bad?
    Thanks for any info you can give me.  Have a HP G60-230US Notebook PC

    Hello dlriowa,
    Take a look at this document and let me know if it helps to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for