Bridges monitoring not showing the newly configured Bridges

Hi all,
We have two WebLogic JMS- WebLogic JMS bridges to configure, we did with the appropriate XA based bridges with QoS as "Exactly-once". Both Source and Target Message destinations are defined as per the definitions and also configured Connection Factory separately configured for XA based messages. it is assigned to respective source and target connection factories. After doing every step that required for configuration of Bridges. When we clicked the monitoring tab these 2 bridges are not visible in the list. Strange thing!
Wehave configured another 8 bridges to MQ Series, the are visible in the monitoring tab but they are showing Warn messge "unable to connect to target".
WebLogic 10.3.5.0 version (11g)
Operating environment: Oracle Enterprise Linux 5
Anyone have such experiance in bridge configuration?
Please suggest what we are missing in the configuration? is there any bug? Security concern?

Hi,
Ideally if configuration is proper and connectivity to source and target destination available it should appear in monitoring tab.
Did you checked is bridge is started? You can check if " JMS Bridge > Configuration [General] > Started " is checked or not.
Thanks,
Ranjan

Similar Messages

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Online Monitoring not showing the graph

We are having an issue in online monitoring. In the summary tab, we don't see the Graph's now.
Last week we updated the Hotfix 7.0.6.3 in SAP BCM 7.0. Not sure because of this its causing the issue.
Please provide suggestion to get this resolved?

Hello.
The solution could be again in Client Workstation installation guide
The Scalable Vector Graphics (SVG) plug-in is required for viewing certain reports of the BCM Online Monitoring application.
For IE versions 8.0 and earlier, download the plug-in from the Adobe web site. You may need to restart your browser before viewing SVG graphics.
IE versions 9.0 and 10 include a SVG viewer, and no separate installation is required, but to enable the viewer, make sure that the monitoring site is not in the compatibility mode. Most cases can be corrected by choosing in IE ToolsCompatibility View Settings, and remove the selection Display Intranet Sites in Compatibility View.
Make sure that the mctabuff component is installed on the computer, see Installation of BCM Terminal Components

Monitor not showing the whole screen when I log out of Xorg/Openbox

Please help, what happens is..
I log into arch, it boots fine (it displays the loading of daemons in like arabic or something but that's another matter!), I can see everything, I 'startx' into Openbox and that's all fine but when I log out of X it cuts off the bottom of my screen.
I've got a widescreen 1680x1080 monitor and an Nvidia GeForce 8400 GS graphics card and I've tried using nvidia and nouveau drivers.
It only started AFTER i'd installed Xorg, I'd just log into x then kill it and i'd have half my screen missing.
I've tried setting nvidia-settings and editing the conf files in Xorg but it must be an issue outside of X surely, as It's always fine in openbox?
any ideas?
Thanks.
EDIT: I did try searching but to no avail - if there's a topic on this i'm very sorry =/
Last edited by teatreetea (2011-01-12 15:28:07)

I don't know how to do the nested scroll thing I'm sorry
/var/log/Xorg.0.log
[ 3557.788] (II) Loading extension DOUBLE-BUFFER
[ 3557.788] (II) LoadModule: "record"
[ 3557.788] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 3557.788] (II) Module record: vendor="X.Org Foundation"
[ 3557.788] compiled for 1.9.2, module version = 1.13.0
[ 3557.788] Module class: X.Org Server Extension
[ 3557.788] ABI class: X.Org Server Extension, version 4.0
[ 3557.788] (II) Loading extension RECORD
[ 3557.788] (II) LoadModule: "extmod"
[ 3557.788] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 3557.788] (II) Module extmod: vendor="X.Org Foundation"
[ 3557.788] compiled for 1.9.2, module version = 1.0.0
[ 3557.788] Module class: X.Org Server Extension
[ 3557.788] ABI class: X.Org Server Extension, version 4.0
[ 3557.788] (II) Loading extension MIT-SCREEN-SAVER
[ 3557.788] (II) Loading extension XFree86-VidModeExtension
[ 3557.788] (II) Loading extension XFree86-DGA
[ 3557.788] (II) Loading extension DPMS
[ 3557.788] (II) Loading extension XVideo
[ 3557.788] (II) Loading extension XVideo-MotionCompensation
[ 3557.788] (II) Loading extension X-Resource
[ 3557.788] (II) LoadModule: "glx"
[ 3557.789] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3557.799] (II) Module glx: vendor="NVIDIA Corporation"
[ 3557.799] compiled for 4.0.2, module version = 1.0.0
[ 3557.799] Module class: X.Org Server Extension
[ 3557.799] (II) NVIDIA GLX Module 260.19.29 Wed Dec 8 12:24:30 PST 2010
[ 3557.799] (II) Loading extension GLX
[ 3557.799] (II) LoadModule: "dri"
[ 3557.799] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 3557.800] (II) Module dri: vendor="X.Org Foundation"
[ 3557.800] compiled for 1.9.2, module version = 1.0.0
[ 3557.800] ABI class: X.Org Server Extension, version 4.0
[ 3557.800] (II) Loading extension XFree86-DRI
[ 3557.800] (II) LoadModule: "dri2"
[ 3557.800] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3557.800] (II) Module dri2: vendor="X.Org Foundation"
[ 3557.800] compiled for 1.9.2, module version = 1.2.0
[ 3557.800] ABI class: X.Org Server Extension, version 4.0
[ 3557.800] (II) Loading extension DRI2
[ 3557.800] (II) LoadModule: "nvidia"
[ 3557.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 3557.801] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 3557.801] compiled for 4.0.2, module version = 1.0.0
[ 3557.801] Module class: X.Org Video Driver
[ 3558.216] (II) NVIDIA dlloader X Driver 260.19.29 Wed Dec 8 12:10:14 PST 2010
[ 3558.216] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 3558.216] (--) using VT number 8
[ 3558.220] (II) Loading sub module "fb"
[ 3558.220] (II) LoadModule: "fb"
[ 3558.220] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3558.221] (II) Module fb: vendor="X.Org Foundation"
[ 3558.221] compiled for 1.9.2, module version = 1.0.0
[ 3558.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3558.221] (II) Loading sub module "wfb"
[ 3558.221] (II) LoadModule: "wfb"
[ 3558.221] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 3558.221] (II) Module wfb: vendor="X.Org Foundation"
[ 3558.221] compiled for 1.9.2, module version = 1.0.0
[ 3558.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3558.221] (II) Loading sub module "ramdac"
[ 3558.221] (II) LoadModule: "ramdac"
[ 3558.221] (II) Module "ramdac" already built-in
[ 3558.221] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 3558.221] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 3558.221] (==) NVIDIA(0): RGB weight 888
[ 3558.221] (==) NVIDIA(0): Default visual is TrueColor
[ 3558.221] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3558.221] (**) NVIDIA(0): Enabling RENDER acceleration
[ 3558.222] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 3558.222] (II) NVIDIA(0): enabled.
[ 3559.086] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G98) at PCI:1:0:0 (GPU-0)
[ 3559.086] (--) NVIDIA(0): Memory: 524288 kBytes
[ 3559.086] (--) NVIDIA(0): VideoBIOS: 62.98.71.00.52
[ 3559.086] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 3559.086] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 3559.086] (--) NVIDIA(0): Connected display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 3559.086] (--) NVIDIA(0): NTS MBW-SERIAL (CRT-1)
[ 3559.086] (--) NVIDIA(0): NTS MBW-SERIAL (CRT-1): 400.0 MHz maximum pixel clock
[ 3559.136] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 3559.136] (==) NVIDIA(0):
[ 3559.136] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 3559.136] (==) NVIDIA(0): will be used as the requested mode.
[ 3559.136] (==) NVIDIA(0):
[ 3559.136] (II) NVIDIA(0): Validated modes:
[ 3559.136] (II) NVIDIA(0): "nvidia-auto-select"
[ 3559.136] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 3559.172] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 3559.172] (--) NVIDIA(0): option
[ 3559.172] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 3559.172] (--) Depth 24 pixmap format is 32 bpp
[ 3559.172] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 3559.174] (II) NVIDIA(0): Initialized GPU GART.
[ 3559.182] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3559.182] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 3559.182] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 3559.182] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 3559.182] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 3559.182] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 3559.182] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3559.182] (II) NVIDIA(0): Config Options in the README.
[ 3559.187] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 3559.254] (II) Loading extension NV-GLX
[ 3559.278] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 3559.283] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 3559.283] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 3559.283] (==) NVIDIA(0): Backing store disabled
[ 3559.283] (==) NVIDIA(0): Silken mouse enabled
[ 3559.290] (==) NVIDIA(0): DPMS enabled
[ 3559.290] (II) Loading extension NV-CONTROL
[ 3559.291] (II) Loading extension XINERAMA
[ 3559.291] (II) Loading sub module "dri2"
[ 355/var/log/Xorg.0.log
[ 3559.767] (**) AT Translated Set 2 keyboard: always reports core events
[ 3559.767] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3559.786] (--) AT Translated Set 2 keyboard: Found keys
[ 3559.786] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3559.786] (II) XINPUT: Adding extended input device "AT Translated Set 2 key$
[ 3559.786] (**) Option "xkb_rules" "evdev"
[ 3559.786] (**) Option "xkb_model" "evdev"
[ 3559.786] (**) Option "xkb_layout" "us"
[ 3559.787] (II) config/udev: Adding input device PC Speaker (/dev/input/event$
[ 3559.787] (II) No input driver/identifier specified (ignoring)
mod edit: code tags
Last edited by litemotiv (2011-01-12 16:12:59)

UCCE CTIOS supervisor not showing the team member

Hello,all. We have ICM 8.0(2) duplex environment. The CTIOS supervisor toolkit is not showing the most updated team member information. It's still showing the old team member who was removed already and not showing the newly added ones. Do we need to restart the CTIOS server when we change the team assignments? The webview report is showing the correct information though.
Thanks.

Hello,
I have seen this happen before. lookup how to execure an OPC exit (this will cause a temp outage in your contact center).... This will resync the team's..
It should just work normally however
Chad

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram and still not working. Message on black monitor says"check signal cable...?

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram per the instructions I received at the MAC store and the monitor is still not working. Message on blacked out monitor says"check signal cable". All cables are attached and monitor and MAC are both plugged into power source...Help ?

Go to System Preferences, Display. Click on dectect displays.

Monitors not showing me the full image

Why are my source and program monitors only showing the bottom half of my images? This just started last night.

http://forums.adobe.com/thread/1251905?tstart=0

The downloader is not showing the thumbnails

The downloader is not showing the thumbnails

johnsteve123 wrote:
Answers to your questions
a. I Only have canon cameras
Good grief, man! You can find all kinds of raw sample files if you just Google.
The Canon EOS 5D Mark II has been supported ever since ACR 5.2.
johnsteve123 wrote:
…I am able to open Canon Raw files in CS6 Bridge and process them…
Bridge cannot open or process any raw files. Only ACR can. Bridge is just a file browser.
Have you tried (a) Repairing Permissions with Apple's Disk Utility and/or (b) purging the cache in the offender folder(s) in Bridge through the Tools menu?

PLD's are not showing the Indian Rupee Sign

Hi All !
I have an issue with Indian Rupee sign .
Using SAP 8.8 PL: 15
I have configured the Rupee Forbidden Font in the Currency setting / Fonts / Local Currency .
The System forms are returning the correct logo of Rupee , but the Layouts with PLD's are not showing the Indian Rupee Sign .
Please suggest the solution for PLD .
Thanks
Ashish Ranjan

Hi Rahul ,
I have converted the entire PLD in the Rupee Forbidden font , but the layout is not returning the correct LOGO .
Even i have configured the Currency correctly . It is showing over the Forms But not showing in the Layout .
It is returning like ` 100
Is there any other setting to do regarding the PLD , for the same.
Thanks
Ashish

Listener not showing the instance for informix.

Hi All,
I am using oracle gateway 11g and here I just discovered that the one of the database listener not showing the instance for the informix gatways, though it has already configured. whereas on other database , the listner is showing the instances for informix database. it was running fine few days back though.
would appriciate , if you coule let me know that why it suddenly stop responding ?
----------------- OK Listener ----------------------------
ptmsap> lsnrctl status LISTENER_PTMSAP
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 29-JUL-2012 05:07:07
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=10.222.68.34)(Port=1621))
STATUS of the LISTENER
Alias                     LISTENER_PTMSAP
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                19-JUL-2012 10:25:25
Uptime                    9 days 18 hr. 41 min. 41 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /db/ptmsap11/oracle/product/11.2.0/network/admin/listener.ora
Listener Log File         /db/ptmsap11/oracle/diag/tnslsnr/tbx4new/listener_ptmsap/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.222.68.34)(PORT=1621)))
Services Summary...
Service "MSCARD4" has 1 instance(s).
Instance "MSCARD4", status UNKNOWN, has 1 handler(s) for this service...
Service "as400" has 1 instance(s).
Instance "as400", status UNKNOWN, has 1 handler(s) for this service...
Service "db2test" has 1 instance(s).
Instance "db2test", status UNKNOWN, has 1 handler(s) for this service...
Service "ptmsap" has 1 instance(s).
Instance "ptmsap", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4ifmx" has 1 instance(s).
Instance "tg4ifmx", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4trai" has 1 instance(s).
Instance "tg4trai", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LISTENER_PTMSAP =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1621)
SID_LIST_LISTENER_PTMSAP =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmsap)
      (ORACLE_HOME = /db/ptmsap11/oracle/product/11.2.0)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (ENV="LD_LIBRARY_PATH=/db/ptmsap11/oracle/product/11.2.0/dg4db2/driver/lib:/db/ptmsap11/oracle/product/11.2.0/lib")
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/db/ptmsap11/oracle/product/11.2.0)
+++++++ Not OK Listener++++++++++++++++++
LISTENER_SMI =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1821)
SID_LIST_LISTENER_SMI =
(SID_LIST =
     (SID_DESC=
     (SID_NAME=SMICAN)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
     (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIINTL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMEL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMRKTS)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
LISTENER_PTMQA11 =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1521)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmqa11)
      (ORACLE_HOME = /pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib)
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/pdsdev/ptmqa/oracle/product/11.2.0/db)
)Regards
Edited by: 937853 on Jul 29, 2012 2:10 AM

thanks all, I was able to solve the issue. it was indeed a port no , which caused this issue.

How do I locate harddisk content like I do in explorer. Finder does not show the hardisk

How do I locate harddisk content (Files/folders) like I do in windows explorer. Finder does not show the hardisk?? Please suggest.
Thanks

Open Finder preferences, select General icon in the toolbar, check the boxes for what to display on the Desktop. Click on the Sidebar icon where you can configure what's displayed on the sidebar.

Iview for UWL not show the tab(Taks, Alerts, Notifications, Tracking)

Dear experts.
I am facing the following issue.
In the MSS for the Workset: Work Overview , for UWL the system not show the tab(Taks, Alerts, Notifications, Tracking), ie the system not show none tab, show a page in blank.
My question is: What is the cause of this issue?
Thanks in advance
regards

use the standard role for UWL, ie check if you are using any modified XML for uwl
This happens if you use custom XML and hide the tabs
Enable the support information for UWL and check in UWL administration
check here
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28UWL%29Navigationnodeca
nnotbeselected
If you only have the .tra and .001 files on the system (and the
standard files) then you can proceed as follows:
So what do we need to do to fix this?
This is a known issue with the MSS system and the generated XML f
However, the fix is quite simply achieved...
For both the .001 and .tra xml files you will need to do the foll
1. Download and save your config for both com.sap.pct.erp.mss.001
com.sap.pct.erp.mss.tra:
2. Open the saved version and save the file with a new name.
Access the configuration file within the zip file and proceed to
the following changes:
I would like you to navigate to the following place in your XML f
<! Work Center UWL shows the same
entries as Control Center UWL >
<NavigationNode name="root"
view="" referenceGroup="">
For every navigation node that has a full path assigned I would l
you to delete up to and inclusive of the last full stop that is
listed in the node. Here is an example for you:
a) first node identified is that fits the criterion above is:
<NavigationNode name="com.sap.pct.erp.mss.Alert"
or check here
system admin, system config
UWL and Workflow
UWL adminsitration
Click to Configure Item Types and Customize Views Using a Wizard
Customize the look of the UWL main page
Select the alerts tab
Click the remove tab from current view button
Then click save and return. The tab is now gone from the UWL UI.

Nexus 7009 does not show the N7K-F248XP-25 modules ethernet ports n sh run

Hi everyone,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the Ethernet ports of these modules, even with the show inventory and show module I can see that the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

You can enable F1, F2, M1, M1XL and M2XL Series modules. There are no restrictions on the type of mix allowed for the system module-type command. The system module-type command allows a mix of F1, F2, M1, M1XL, and M2XL Series modules in the VDC.
Note The limit-resource module-type command controls the restrictions on the module-types that can be mixed in the VDC.
Note Use the system module-type f2 command to allow F2E Series modules into a VDC. The ports from F2 and F2E Series modules can be allocated like any other ports.
Note The modules that you do not enable must not be powered on after you configure this feature and enter yes. An error message will force you to manually disable these modules before proceeding. This prevents major disruption and service issues within a VDC.
The no form of this command resets the configuration mode to allow all modules.
hope this helps

BBP_MON_SC : does not show the details of the Shopping cart

Hi,
We are in SRM4.0 and Stack 11.
when we use the transaction:BBP_MON_SC to check the Shopping cart and get into the details, the system does not show the "details of the shopping cart".
The sequence of the steps :
1) click on the "monitor shopping cart"(BBP_MON_SC) in our web browser
and search the SC by date.
2) The list of the SC created on the specific date come up.
3) when we select a SC to get into the details the system shows
a "BLANK SCREEN".
Thanks in advance.
Regards,
RK.

Hi,
First check whether you have implementedany custom BADI at the SC item level.If the BADi is wrongly implemented then you may not be able to see the item details.
Also Make sure that BASIS Team has assigned correct roles and profiles to the administrator user. Ask BASIS to use SAP provided roles and then you can try out again. (Try this role - SAP_EC_BBP_ADMINISTRATOR / SAP_BBP_STAL_ADMINISTRATOR )
Here are the related links ->
http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/9f/a47c3c989d501fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/46d19e4069d14e92decb87d6a56b9c/frameset.htm
Incase it does not help, then, Without assigning any other roles, try logging to the transaction - BBP_MON_SC via SAP GUI instead of webpage and then do once you get some authorization issue /error, using SU53 Transaction, you can get the required Authorization objects need to attached to the user profile.
Alternatively, For time being, Try assigning SAP_ALL and SAP_NEW to the Administrator Buyer user role of that user.
Also have a look at these notes:
Note 636270 Shopping cart monitor: Display of SC if user is deleted
Note 764135 Shopping cart monitor: Selection according to 'Created by'
Note 865179 BBP_MON_SC: Search for shopping carts shows wrong results
Note 683524 Shopping cart monitor does not display all shopping carts
Note 1045386 BBP_MON_SC: No DELETED Event after deletion
Note 829529 BBP_MON_SC: Displaying shopping cart of a locked user
901427 BBP_MON_SC: Requester instead of creator in overview list
859012 BBP_MON_SC: Deleted shopping carts are not found
882884 BBP_MON_SC: Deleting items in the status I1116
792542 Shopping cart monitor: incor. return URL from shopping cart
672764 Shopping cart monitor: Display of deleted shopping carts
Note 522620 Shopping cart monitor: Customer enhancement / BADI
Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
949399 SC monitor: Search help does not display all catalogs
972697 bbp_mon_sc: No result for limit shopping cart search
901608 BBP_MON_SC: Service Item search is incorrect
813434 Shopping cart monitor and internal ITS:Shopping cart display
669720 BBP_MON_SC: Follow-on document is not found
625694 Not possible to search for SHB based on some docs in monitor
596089 SHP Monitor: problems with search functionalities
Note 561186 Monitor shopping cart: Selection of large datasets
BR,
Disha.
Pls reward points for useful answers.

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

Bridges monitoring not showing the newly configured Bridges

Similar Messages

Maybe you are looking for