Bridging AIR-AP1131AG with TP-Link

Hi Guys,
Today I want to build a wireless bridge using AIR-AP1131AG (running WLC) and TP-LINK wireless router.
The result is failed. May I know AIR-AP1131AG is support bridging the wireless connection with other vendor's access point or not?
In the TP-Link I already match its SSID, Channel and put the mac-address of the AIR-AP1131AG.
In the WLC I already see too TP-LINK mac-address is already become a client.
So what's the problem guys?
Thanks Guys

Well bridging isn't supported when using a wlc, only workgroup bridge. So what your trying to accomplish will not work. You would have to convert the 1131 to autonomous, but you would need another Cisco device configured as a bridge on the other end. Or else you can leave the 1131 on the wlc and get a device that functions as a workgroup bridge or Ethernet converter. I have used the Buffalo Ethernet converters and the work just fine. You can use most of the the Cisco APs starting with the 1131 as WGBs also.
Sent from Cisco Technical Support iPhone App

Similar Messages

Less than two week old iPad Air crashes with youtube/netflix and Safari when loading pages with video (i.e. Buzzfeed with links to youtube and vine). What's up with iPad Air's bugs with videos??

Week and a half old iPad Air crashes with light usage of youtube, netflix and safari pages with video links to youtube and vine. The consistency of problems with videos has led me to determine that it must be bugs with iPad Air. Anyone else having this problem?
Details: iPad Air 16gb wifi, have only used about 25% of space and always close all apps before opening another. I also have only had a max of two tabs open on safari of basic internet surfing (i.e. A google search page, or imdb for example). These crashes are annoying as sh......

em74 wrote:
These crashes are annoying as sh......
I can well imagine that they are.
I would backup, restore to factory settings, restore from the backup and then try again. If that fails, restore again but do not use the backup - restore as new. If the iPad functions OK as new, then slowly rebuild the iPad adding your apps, music etc, methodically to see if you can pin down what might be causing the problem.
if all of that fails, it's time to schedule an appointment at an Apple a Store (must be done online) and have them take a look, or of it is lees than two weeks old, just return it for a refund and buy another one.

AIR-AP1131AG-E-K9 have been converted to LW how do I convert it back to Auto?

Hi,
One of my clients has a new WiFi solution and he has given me his old AIR AP1131AG-E-K9 to my LAB. The problem is that access-points have been converted to LW and the customer has thrown out the controller.
I do not know the enable password, how can these APs be reset to their default setting?

Resetting to Default Settings Using the CLI
Caution You should never delete any of the system files prior to resetting defaults or reloading software.
If you want to reset the access point to its default settings and a static IP address, use the write erase or erase /all nvram command. If you want to erase everything including the static IP address, in addition to the above commands, use the erase and erase boot static-ipaddr static-ipmask command.
From the privileged EXEC mode, you can reset the access point/bridge configuration to factory default values using the CLI by following these steps:
Step 1 Enter erase nvram: to erase all NVRAM files including the startup configuration.
Note The erase nvram command does not erase a static IP address.
Step 2 Follow the step below to erase a static IP address and subnet mask. Otherwise, go to step 3.
a. Enter write default-config.
Step 3 Enter Y when the following CLI message displays: Erasing the nvram filesystem will remove all configuration files! Continue? [confirm].
Step 4 Enter reload when the following CLI message displays: Erase of nvram: complete. This command reloads the operating system.
Step 5 Enter Y when the following CLI message displays: Proceed with reload? [confirm].
Caution Do not interrupt the boot process to avoid damaging the configuration file. Wait until the access point/bridge Install Mode LED begins to blink green before continuing with CLI configuration changes. You can also see the following CLI message when the load process has finished: Line protocal on Interface Dot11Radio0, changed state to up.
Step 6 After the access point/bridge reboots, you can reconfigure the access point by using the Web-browser interface if you previously assigned a static IP address, or the CLI if you did not.
The access point is configured with the factory default values including the IP address (set to receive an IP address using DHCP). To obtain the access point/bridge's new IP address, you can use the show interface bvi1 CLI command.
The 1300 series access point/bridge assumes a radio network role of a root access point. To configure it as a bridge, you must manually place it in install mode in order to align the antennas and establish a link. To establish the link you must have two access point/bridges configured in the install mode. In the install mode, one access point/bridge must be configured as a root bridge and the other a non-root bridge. To facilitate the configuration, an automatic option is available when the access point/bridge is in the install mode. After the wireless link is established and the bridge antennas are aligned, you take both access point/bridges out of install mode and place them on your LAN as root and non-root bridges.
Note "Resetting the Device to Default Settings" sectionIf xon/xoff flow control does not work, use no flow control.
Step 7 When connected, press enter or type en to access the command prompt. Pressing enter takes you to the user exec mode. entering en prompts you for a password, then takes you to the privileged exec mode. The default password is Cisco and is case-sensitive.
Note If xon/xoff flow control does not work, use no flow control.
Step 8 When connected, press enter or type en to access the command prompt. Pressing enter takes you to the user exec mode. Entering en prompts you for a password, then takes you to the privileged exec mode. The default password is Cisco and is case-sensitive.
Note When your configuration changes are completed, you must remove the serial cable from the access point.

AIR-AP1131AG-A-K9 Reload Reason: FAILED CRYPTO INIT.

Hi All,
I have a standalone AP of model AIR-AP1131AG-A-K9 and have changed the mode to LAP by using mannual archive command. However after changing the mode to LAP it gives below log and keep on booting.
Reload requested by LWAPP CLIENT. Reload Reason: FAILED CRYPTO INIT.
> I did found from below link that the reason is as mentioned in point number 9, however solution didnt worked.
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml
> I did downloaded CiscoAironet-AP-to-LWAPP-Upgrade-Tool-v34.exe to upgrade but after executing this file nothing happens.
Kindly help me in understanding whats going wrong with my AP?
Here is the logs.
*Mar 1 00:00:06.644: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:07.644: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
ap>
*Mar 1 00:00:18.603: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:24.691: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:24.711: LWAPP_CLIENT_ERROR_DEBUG: lwapp_crypto_init_ssc_keys_and_certs no certs in the SSC Private File
*Mar 1 00:00:24.711: LWAPP_CLIENT_ERROR_DEBUG:
*Mar 1 00:00:24.711: lwapp_crypto_init: PKI_StartSession failed
*Mar 1 00:00:24.729: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: FAILED CRYPTO INIT.
*Mar 1 00:00:24.729: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.

One of the errors is saying that it can't find any SSC in the private file.
This yells me the AP doesn't have a certificate. Why you'll want ti do is reload an IOS image on the AP and then use the conversion tool to load the capwap image. By using the conversion tool, it wil execute some commands that create a SSC, a self signed certificate. Then you load the SSC on the WLC and the AP should be able to boot up and join.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Sent from Cisco Technical Support iPhone App

I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling

Performance issue when opening DOCX Word Doc with Excel Links

Is this a bug or is there a config setting that can prevent Word from needlessly opening Excel repeatedly (upon initial open of a DOCX Word doc) when pre-existing links should NOT be updated. The behavior is good using 2003 formats (DOC & XLS),
but varies significantly (~100:1 range in performance) depending on the test scenario (see below) using DOCX with XLSX.
We can't move our environment to the new XML formats until we can find a fix. We were led to believe Microsoft knew this to be a bug in Office 2007, but it has NOT been corrected in Office 2010. Omitting a detailed explanation for why we need to
do this, here's our test scenarios:
-Currently testing Office 2010 Pro Trial version on WIN XP SP3. (We have found similar results using Office 2007 with Win7 or XP).
-Word Option Deselected/DISABLED: "Update Automatic Links at Open"
-The Word Doc contains 100 linked Excel tables and is 130K in size (DOCX).
-Each link points to the same 10x10 cell range in one Excel Workbook located in same directory as the Word Doc, although other tests using separate directories produced similar results.
-The Excel Links were inserted into Word via Paste Special/Paste Link/MS Excel Worksheet Object.
-The workbook (XLSX) is 15K in size.
-All Links are set for "Manual" update, our testing showed no difference if links are set to "Auto".
-Again, Word is set to NOT update Automatic links when the document is opened.
-Results shown below are for local hard drive test.
-Network response times are slightly greater on 100mb LAN
-Word is completely restarted prior to each test to make sure there's no application caching involved.
LOCAL DRIVE RESPONSE TIMES TO OPEN THE WORD DOC in Docx format:
1. Open the Word Doc from Word with Excel closed - 175 seconds (Excel appears to be opened and closed once per link)
2. Open the Word Doc from Word with Excel open & workbook closed - 33 seconds (Excel appears to be accessed once per link)
3. Open the Word Doc from Word with the linked workbook already open - 7 seconds (Excel appears to be accessed once per link)
4. Rename Excel XLSX workbook so that Word can't find it. Then open Doc the from Word. 1-2 seconds (Excel does not appear to be invoked)
5. Repeat ALL of the above scenarios 1-4 using DOC and XLS files. These files are created with "Save AS" option based on original test files and then re-pasting the links. 1-2 seconds to open the Word Doc (Excel does not appear to be invoked)
Summary
Using DOCX/XLSX, if Word can't find the linked spreadsheet it gives up and performs nicely during file-open. Otherwise, Word performs needless, time-consuming access to Excel, and in the worst case, opens and closes Excel repeatedly in the background.
Testing with DOC/XLS formats gives good performance across all scenarios.

It is a known bug and one for which AFAIK, there has been no fix. The only way that I could get around it in a particular application was to do something like save the linked information as document variables and then on opening the document recreate
all the information. My memory on exactly what I did is a bit hazy, but I can go back and check if you are interested.
-- Hope this helps.
Doug Robbins - Word MVP,
dkr[atsymbol]mvps[dot]org
Posted via the Community Bridge
"galmcrantz" wrote in message news:[email protected]...
Is this a bug or is there a config setting that can prevent Word from needlessly opening Excel repeatedly (upon initial open of a DOCX Word doc) when pre-existing links should NOT be updated. The behavior is good using 2003 formats (DOC & XLS), but varies
significantly (~100:1 range in performance) depending on the test scenario (see below) using DOCX with XLSX.
We can't move our environment to the new XML formats until we can find a fix. We were led to believe Microsoft knew this to be a bug in Office 2007, but it has NOT been corrected in Office 2010. Omitting a detailed explanation for why we need to do this,
here's our test scenarios:
-Currently testing Office 2010 Pro Trial version on WIN XP SP3. (We have found similar results using Office 2007 with Win7 or XP).
-Word Option Deselected/DISABLED: "Update Automatic Links at Open"
-The Word Doc contains 100 linked Excel tables and is 130K in size (DOCX).
-Each link points to the same 10x10 cell range in one Excel Workbook located in same directory as the Word Doc, although other tests using separate directories produced similar results.
-The Excel Links were inserted into Word via Paste Special/Paste Link/MS Excel Worksheet Object.
-The workbook (XLSX) is 15K in size.
-All Links are set for "Manual" update, our testing showed no difference if links are set to "Auto".
-Again, Word is set to NOT update Automatic links when the document is opened.
-Results shown below are for local hard drive test.
-Network response times are slightly greater on 100mb LAN
-Word is completely restarted prior to each test to make sure there's no application caching involved.
LOCAL DRIVE RESPONSE TIMES TO OPEN THE WORD DOC in Docx format:
1. Open the Word Doc from Word with Excel closed - 175 seconds (Excel appears to be opened and closed once per link)
2. Open the Word Doc from Word with Excel open & workbook closed - 33 seconds (Excel appears to be accessed once per link)
3. Open the Word Doc from Word with the linked workbook already open - 7 seconds (Excel appears to be accessed once per link)
4. Rename Excel XLSX workbook so that Word can't find it. Then open Doc the from Word. 1-2 seconds (Excel does not appear to be invoked)
5. Repeat ALL of the above scenarios 1-4 using DOC and XLS files. These files are created with "Save AS" option based on original test files and then re-pasting the links. 1-2 seconds to open the Word Doc (Excel does not appear to be invoked)
Summary
Using DOCX/XLSX, if Word can't find the linked spreadsheet it gives up and performs nicely during file-open. Otherwise, Word performs needless, time-consuming access to Excel, and in the worst case, opens and closes Excel repeatedly in the background.
Testing with DOC/XLS formats gives good performance across all scenarios.
Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org

Problem converting air-ap1131ag-a-k9 to Lwapp

i have a person on my team who converted some autonomoous air-ap1131ag-a-k9 to lwapp. I don't think they did it right.
what they did is , booted the ap ( at this point it was running in autonomous mode), set the ip to 192.168.1.200 and their laptop to 192.168.1.100 connected the laptop directly to the AP. (I have found out that these AP's were old AP's that previously had configs on them, ( static ips, a whole config) they came from another building , they were the ones that other lwapps replaced.)
they then went to the web gui of the AP , went to software upgrade and loaded the lwapp recovery image on the ap (c1130-rcvk9w8-tar.124-10b.JA3.tar). the software loaded fine, and converted the AP . and thats all they did
(I had mentioned that we should use the upgrade tool, but they didn't listen)
the aps got mounted , on the ceiling in the hospital, but when they went to turn them on, they didnt show up right on the controller , they kept joining and unjoining..
i think there is a problem with the SSC, i remember, something like the time had to be the same on the ap and on the WLC.
anyways, these could be older AP's before 2005 ( unknown to me) which would mean they dont hav MIC's and have SSC. and the ap is refusing them is my thought.
the WLC is setup to accept self signed certs.
anyways...
these aps are now mounted on the ceilings , and when you do a show cdp nei, it has an ip address from when it was an autonomous ap.
Also, what is the best process you have found to convert Old autonomous 1131 AP's to lightweight mode?
thanks
the controller is running 4.2.176 WLC code. i currently don't have Access to WCS or a spare controller to use with the upgrade utility.
the controller is a 4404-100

i went to the wlc and issued the command
debug lwapp events enable
i got the following output
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 Received LWAPP JOIN REQUEST from AP 00:11:20:1a:07:a9 to 06:0a:10:10:00:00 on port '29'
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 AP AP0011.201a.07a9: txNonce 00:00:00:00:00:00 rxNonce 00:00:00:00:00:00
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 LWAPP Join Request MTU path from AP 00:11:20:1a:07:a9 is 1500, remote debug mode is 0
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 Processing Radius Response: AP Authorization failure for 00:11:20:1a:07:a9
Sat Jun 13 12:41:54 2009: 00:1e:f7:ed:e8:aa Did not receive hearbeat reply from AP 00:1e:f7:ed:e8:aa
Sat Jun 13 12:41:54 2009: DTL Deleting AP 5 - 0.0.0.0
Sat Jun 13 12:41:55 2009: 00:11:21:89:fb:30 Received LWAPP ECHO_REQUEST from AP 00:11:21:89:fb:30
Sat Jun 13 12:41:55 2009: 00:11:21:89:fb:30 Successful transmission of LWAPP Echo-Response to AP 00:11:21:89:fb:30
Sat Jun 13 12:41:55 2009: 00:21:55:c2:06:20 Received LWAPP DISCOVERY REQUEST from AP 00:21:55:c2:06:20 to ff:ff:ff:ff:ff:ff on port '29'
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP STATISTICS_INFO from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Statistics Info Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:58 2009: 00:1d:70:f4:3e:50 Received LWAPP DISCOVERY REQUEST from AP 00:1d:70:f4:3e:50 to ff:ff:ff:ff:ff:ff on port '29'
can someone help me decipher what it means, i think i need to debug to get the sha key.
there are about 14 new ap's. and they all have problems.
thanks

Deploying Air Application with Zend AMF Dataservices to remote server?

I cannot find anything to guide me through getting this set up.. it's frustrating because I feel this is probably the whole point of Air!
I have an Air project in Flash Builder which is set up with the Data/Services panel, using a custom php model file.
It's working fine on localhost, but I do not know what is necessary to have it work while the app is running locally but connecting to a remote server (can get it working as a flex app in browser hosted remotely, though)
I uploaded the Zend framework and my custom php files to the net
I changed the amf_config.ini file .. the webroot and the zend_path, I assume, should be different depending whether it's localhost or on a server, so I changed the one online to be match where the files are.
I found in the _super_Database.as it was referencing the Zend gateway.php locally, so I changed that to be an absolute link to where I put gateway.php on the server.
But I'm not sure what to do next... I assume I only need the Zend framework and the php files I'm using online, but then there is no link to my Database.php anywhere other than as a symbolic link from services/Database.php to the bin-debug folder.. but I don't know how exactly to put that on the server and then compile my app... and I can't find any explanations anywhere.
Anyone know how to go about this?

Hello everyone,
Exact the same problem here. I've build an Air app with PHP in the backend. On my localhost it works fine... but, when i am tranfer it to the remote server it just won't work.
I have changed settings in amf_config.ini and in gateway.php, and I have changed the settings in super class of my flash file, so it knows where to find the new gateway.php.
Can someone please help a hand... (mmm it is almost Christmas .... )
Thanks., Erik

WIFI problems solved with D-Link USB WIFI adapter...

I have a brand new Macbook Air and I have persistent problems connecting to my home wifi network. Sometimes I can connect to the router but not the internet, but usually Airport won't connect at all: it keeps asking me for the password for our home network (even though it's stored), so I re-enter the password, but it still can't connect. When it gets to this point I know that I either have to live without internet for the rest of the day, or disrupt my work and everyone else in the household by rebooting my computer and reseting the router (sometimes just one of these actions will work, but it's unpredictable).
So I bought a D-Link DWA-125 USB wireless adapter and installed drivers from Ralink (http://www.ralinktech.com/support.php?s=3) and it pretty much solves the issue.
I don't know what further proof Apple needs that this is a problem with the Air and not the internet/router/etc. It's rather comical that I have to use an ugly old USB adapter to get a brand new Macbook Air to connect to internet in my own home.

vilayyyy wrote:
I've had my Macbook for 2 yrs and the wifi basically never worked - only when I'm right next to the router, at school, or of course the Apple Store. I tried to get apple to fix it under AppleCare, but since it was working perfectly in the store, they said there was nothing they could do.
If your Mac works well at school, or the Apple Store but not at home, the problem definetly is not the Mac and therefore there is no need to buy a external usb wifi device.
You better will fix the settings of your home router and after that your Mac will be fast and smooth on your home wifi.
I've had only on very rare situations a problem with d-link routers over the years and think (if not damaged) even your d-link will work pretty good with your Mac.
Would you be so kind and explain the settings of your home router and what model it is?
Lupunus

Manage AIR-AP1262N with WLC 5508

hello,
is it possible to manage a air-ap1262n with a controller like wlc 5500 or wlc 2500?
the official cisco support could not answer me this question for sure.
i have found this old guide to upgrade ap´s to lap´s, but there is hothing about the 1260 in it.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
i am a little bit confused!
the cisco documents tells:
"at_a_glance_c45-636090.pdf"
->
A wireless network with standalone access points offers a low-cost, entry-level
solution that does not require a controller. It is ideal for small-scale networks with less
than 20 access points, and offers base-level wireless functionality with the flexibility to
scale and add services over time by adding a controller.
<-
but the cisco helpline tells that they cant say it for sure - they cant find anything about that it would work and nothing that it dont work. ...and they have no one they could ask!^^
now I hope to find an answer
thanks and greetings
erik

Hi,
As mention by Steve, download the recovery image and then upgrade the AP IOs using the archive command over the CLI and instead of using the IOS image you use the LWAPP.
The supported AP is set by the code the WLC has and not the model of WLC.
The 1262 APs are supported starting code 7.0.98.0
Here is the link where you can check on all the release notes on different codes for the WLC, and you can see which APs are supported on each code.
http://www.cisco.com/en/US/products/ps10315/prod_release_notes_list.html

Most recent update to Photoshop CC and Bridge breaks use with snow leopard. need previous vsn

The most recent version of Bridge CC installed with adobe's updater killed my systems year long use of Bridge CC so it won't load. I need the previous version. I can't update to 10.7 for technical and other software workflow reasons. How can I get back to the previous vsn that did work yesterday?

I would guess you need to uninstall bridge cc and then reinstall without applying the 6.1 update
(use the uninstaller in /Applications/Adobe Bridge CC)
You can download Bridge CC direct from here
Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
And the Bridge cc 6.0.1 update from here any others you might need
(don't install the 6.1 bridge cc update, because that is the update that breaks bridge on 10.6.8)
All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools
Be sure you follow the directions where it says Note: Very Important Instructions or the links won't work.

Compile AIR application with Ant (WindowedApplication could not be found)

I'm trying to compile my AIR application with Ant, using the mxmlc Ant Task. It seems to compile fine, and I get a .swf, but when I try to run it with ADL, I get the message "Class mx.core::WindowedApplication could not be found." It looks like the AIR libraries aren't being included properly.
Here's my mxmlc task:
Class mx.core::WindowedApplication could not be found.
<mxmlc
     file="${MAIN_MXML}"
     output="${DEPLOY_DIR}/MyApp.swf"
     compatibility-version="3"
     locale="en_US"
     static-rsls="true"
     debug="${DEBUG_FLAG}"
     optimize="true"
     link-report="${DEPLOY_DIR}/report.xml"
     configname="air">
     <load-config filename="${FLEX_HOME}/frameworks/air-config.xml" />
     <library-path dir="${FLEX_HOME}/frameworks/libs" append="true">
          <include name="*.swc" />
     </library-path>
     <library-path dir="${FLEX_HOME}/frameworks/libs/air" append="true">
          <include name="*.swc" />
     </library-path>
     <library-path dir="${FLEX_HOME}/frameworks/locale" append="true">
          <include name="{locale}" />
     </library-path>
     <source-path path-element="${SRC_DIR}" />
</mxmlc>
Any idea why this is happening? I've tried not including the load-config section and not including the library paths, but it's always the same result - it can't find WindowedApplication.
Thanks!

Hi, Guys!
I ran into the same problem when i tried to write an ant-script to compile the asDocs for my project.
After reading shades post i added the air-config (This resolved the WindowApplication couldn't be found error, because it adds all the air libs i guess)
but lead to the problem that the flex vector-class wasn't found. As Vector is flashplayer 10.0.0 i also
used the target-player parameter (This fixed that nicely).
But now i got the problem that i get lots of this error msgs: DepartmentItemRendererClass.as(11):
Error: The private attribute may be used only on class property definitions.
I guess the problem now is that ant doesn't understand that the AS-Classes producing that errors are not used as
standalone-classes. To divide my mxml and AS-Code i import external AS-Classes to my MXML
like that <mx:Script source="ascodeClass.as" />
Is there a solution allowing me to use this pattern and still compile my asDoc with ant?
It confuses me a little, because Ant-Scripts worked to compile the project.
Thanks in advance!
Florian
My Ant-Script producing that error:
<project name="Red bull BPT 2.0: Generate ASDoc" basedir=".">
    <description>
       Creates the ASDoc for Red Bull BPT 2.0
    </description>
    <property file="FlexbuilderASDocAntTask.properties" />
    <taskdef resource="flexTasks.tasks" classpath="${FLEX_HOME}/ant/lib/flexTasks.jar" />
    <target name="cleanAndCreateASDoc"
            depends="cleanASDoc, compileASDoc"
            description="Cleans and creates Actionscript-Documentation"
            />
        
            <target name="cleanASDoc">
                <echo>Deleting ASDoc Directory...</echo>
                    
                    <delete dir="${Asdoc.dir}" failOnError="false" includeEmptyDirs="true" />
                    <echo>Deleted ASDoc Directory</echo>
                    <echo>Creating ASDoc Directory...</echo>
                    
                    <mkdir dir="${Asdoc.dir}" />
                <echo>Created ASDoc Directory</echo>
            </target>
        
            <target name="compileASDoc">
                <echo>ASDoc Compiling...</echo>
                    <exec executable="${AsDocs.executable}" failonerror="true">
                    
                        <arg line="-load-config ${FLEX_HOME}/frameworks/air-config.xml" />
                        <arg line="-target-player 10.0.0" />
                    
                    
                        <arg line="-main-title '${Main.title}'" />
                    
                        <arg line="-window-title '${Window.title}'" />
                    
                        <arg line="-output '${Asdoc.dir}'" />
                    
                        <arg line="-footer '${Footer.text}'" />
                    
                        <arg line="-doc-sources '${ModuleBaseDir}/source'" />
                    
                    
                        <arg line="-external-library-path '${ModuleBaseDir}/libs'" />
                    
                    </exec>
                <echo>ASDoc Compile Complete!</echo>
    </target>
</project>

"Lost" ICMP6 neighbor solicitation using global link or ULA, not with local link

Hello,
Sorry for my bad english.
I have a strange issue with IPV6 and Airport.
No issue with Ethenet link (native ethernet link with MacBook Pro 2007 under 10.8.3, USB ethernet link with MacBook Air 2011 under 10.8.3).
No issue with Windows 8 via Boot Camp on Mac Book Pro 2007.
Facts :
ICMP6 Router sollication gets ICMP6 Router Advertissment.
MacBook Pro and MacBook Air under 10.8.3 gets ipv6 config.
Example for my MacBook Air :
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 04:0c:ce:da:b9:32
        inet6 fe80::60c:ceff:feda:b932%en0 prefixlen 64 scopeid 0x4
        inet6 2001:470:cd49:fee1:60c:ceff:feda:b932 prefixlen 64 autoconf
        inet6 2001:470:cd49:fee1:d9b3:40b6:bc67:c01b prefixlen 64 autoconf temporary
        inet6 fd00:fee1:fee1::60c:ceff:feda:b932 prefixlen 64 autoconf
        inet6 fd00:fee1:fee1::b8f6:3ec1:a7a6:f64f prefixlen 64 autoconf temporary
        inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255
        media: autoselect
        status: active
My MacBook Air gets 2 Global Link and 2 ULA from ICMP Router Advertissment from my router (DLink DIR-655 B1).
Local Link, Global Link and first ULA adress are acquired via EUI-64.
Others adress are random temporary address.
Connections (tcp6, udp6, icmp6) are ok from Local Link.
Examples :
Ping from MacBook Air Mac Mac OS X 10.8.3 to MacBook Pro Windows 8 via Bootcamp :
bash-3.2$ ping6 -c 1 fe80::811c:6008:f31c:2e06%en0
PING6(56=40+8+8 bytes) fe80::60c:ceff:feda:b932%en0 --> fe80::811c:6008:f31c:2e06%en0
16 bytes from fe80::811c:6008:f31c:2e06%en0, icmp_seq=0 hlim=64 time=11.112 ms
This fact is true (Local Link Ok) for all combinaison (Mac OS X 10.8.3 to Mac OS X 10.8.3, Mac OS X 10.8.3 to WIndows 8, Windows 8 to Mac OS X 10.8.3).
Issue :
Connections (tcp6, udp6, icmp6) are note possible if "destination" is under my lived running Mac OS X 10.8.3.
The destination element is essential.
I can ping from Mac OS X 10.8.3 to Windows 8.
It's why my neighbor is coherent (global, ULA, local are resolved).
bash-3.2$ ndp -a -n
Neighbor                        Linklayer Address Netif Expire    St Flgs Prbs
::1                             (incomplete)         lo0 permanent R
2001:470:cd49:fee1:60c:ceff:feda:b932 4:c:ce:da:b9:32 en0 permanent R
2001:470:cd49:fee1:6438:7211:58ce:b389 0:1e:52:71:61:9d en0 23h53m57s S
2001:470:cd49:fee1:811c:6008:f31c:2e06 0:1e:52:71:61:9d en0 23h54m12s S
2001:470:cd49:fee1:d9b3:40b6:bc67:c01b 4:c:ce:da:b9:32 en0 permanent R
fd00:fee1:fee1::60c:ceff:feda:b932 4:c:ce:da:b9:32   en0 permanent R
fd00:fee1:fee1::b8f6:3ec1:a7a6:f64f 4:c:ce:da:b9:32 en0 permanent R
fde4:416c:c381:3388:f496:c836:ac6:dcda (incomplete) utun0 permanent R
fe80::1%lo0                     (incomplete)         lo0 permanent R
fe80::1%en0                     (incomplete)         en0 expired   N
fe80::60c:ceff:feda:b932%en0    4:c:ce:da:b9:32      en0 permanent R
fe80::3608:4ff:fee1:8ada%en0    34:8:4:e1:8a:da      en0 23h59m24s S R
fe80::811c:6008:f31c:2e06%en0   0:1e:52:71:61:9d     en0 23h56m35s S
fe80::f496:c836:ac6:dcda%utun0 (incomplete)       utun0 permanent R
But :
I can't ping from Mac OS X 10.8.3 to Mac OS X 10.8.3 if I use Global Link adress or ULA adress.
I can't ping from Windows 8 to Mac OS X 10.8.3 if I use Global Link adress or ULA adress.
Example (from Windows 8, I have rebooted my MacBook Pro, but effets are similars).
C:\Windows\SysWOW64>ping -n 1 2001:470:cd49:fee1:60c:ceff:feda:b932
Envoi d'une requ?te 'Ping' 2001:470:cd49:fee1:60c:ceff:feda:b932 avec 32 octets
de donn?es?:
Impossible de joindre l'h?te de destination.
Statistiques Ping pour 2001:470:cd49:fee1:60c:ceff:feda:b932:
    Paquets?: envoy?s = 1, re?us = 0, perdus = 1 (perte 100%),
Interface 12 : Wi-Fi
Adresse Internet                              Adresse physique   Type
2001:470:cd49:fee1::                          00-00-00-00-00-00 Inaccessible
2001:470:cd49:fee1:60c:ceff:feda:b932         Inaccessible       Inaccessible
fe80::60c:ceff:feda:b932                      04-0c-ce-da-b9-32 Caduque
fe80::3608:4ff:fee1:8ada                      34-08-04-e1-8a-da Caduque (Routeu
r)
ff02::1                                       33-33-00-00-00-01 Permanent
ff02::2                                       33-33-00-00-00-02 Permanent
ff02::c                                       33-33-00-00-00-0c Permanent
ff02::16                                      33-33-00-00-00-16 Permanent
ff02::fb                                      33-33-00-00-00-fb Permanent
ff02::1:3                                     33-33-00-01-00-03 Permanent
ff02::1:ff1c:2e06                             33-33-ff-1c-2e-06 Permanent
ff02::1:ffce:b389                             33-33-ff-ce-b3-89 Permanent
ff02::1:ffda:b932                             33-33-ff-da-b9-32 Permanent
ff02::1:ffe1:8ada                             33-33-ff-e1-8a-da Permanent
Using WireShark, I noticed :
- Destination under my 2 Lived Mac OS X 10.8.3 doesn't received ICMP6 neighbor solicitation if adress are Global Link or ULA.
But ICMP6 neighbor sollicitation are emitted.
No issue with Local Link address.
Using WireShark's monitor mode, I noticed :
- 802.11 frame are received on multicast group associated with asked IP neighbor solicitation for any kind of address.
It seems that ICMP6 neighbor solicitation are lost between 802.11 frames and IPV6 / ICMP6 stack.
IPV6 firewall is not configured to drop packets.
bash-3.2$ sudo ip6fw show
Password:
65535          0          0 allow ipv6 from any to any
VMWARE Fusion is installed on my Lived MacBook Air 10.8.3 and MacBook Pro 10.8.3.
But tests are made with associated modules not loaded :
bash-3.2$ sudo kextstat |grep -v com.apple
Index Refs Address            Size       Wired      Name (Version) <Linked Against>
Like I said in post beginngin, issue doesn't occurs with ethernet link, only Airport link.
Some one can help me for this strange issue ?
Thanks for your help !
Philippe

Hello,
Thank you for your reply. It would make sense for me if R2 would not receive any packet, but it receives a request and then does not send any reply to NS sent from R1 as I showed in the example. Path to R2 which is a gateway is seen as directly connected on R1:
R1#sh ipv6 ro
IPv6 Routing Table - 5 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
C 2001:1::/64 [0/0]
via ::, FastEthernet0/0
L 2001:1::2/128 [0/0]
via ::, FastEthernet0/0
S 2001:2::/64 [1/0]
via ::, FastEthernet0/0
L FE80::/10 [0/0]
via ::, Null0
L FF00::/8 [0/0]
via ::, Null0
I'm wondering why R2 cannot respond when its own interface has an address that I want to ping (2001:2::1)

AIR-AP1131AG-I-K9 support AES 256 bit ?

hi,
I have several AP devices:
Product/Model Number: AIR-AP1131AG-I-K9
System Software Filename: c1130-k9w7-tar.124-3g.JA
System Software Version: 12.4(3g)JA
Bootloader Version: 12.3(8)JEA
i need to know if AES 256 bit is supported by this devices and if the current software need to upgrade for that.
Regards,

HI Ben,
As per my knowledge this Software dont support 256 bit key size.
Here is the link:http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_3g_JA/configuration/guide/ios1243gjaconfigguide/s43wep.html
another version: 12.3(8)JA supports 256 bit key size to protect data traffic,
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-3_8_JA/configuration/guide/1238jasc/s38wep.html
Regards
Don't forget to rate helpful posts

[svn:fx-4.0.0] 13714: updating the AIR kits with versions that have the fx4 swc recompiled using SDK 13653

Revision: 13714
Revision: 13714
Author:   [email protected]
Date:     2010-01-22 08:12:15 -0800 (Fri, 22 Jan 2010)
Log Message:
updating the AIR kits with versions that have the fx4 swc recompiled using SDK 13653
Modified Paths:
    flex/sdk/branches/4.0.0/in/air/mac/AIR Integration Kit.tbz2
    flex/sdk/branches/4.0.0/in/air/win/AIR Integration Kit.zip

Thanks dude, you saved my ***!
This is my platformOptions.xml file now:
<platform xmlns="http://ns.adobe.com/air/extension/3.5">
    <sdkVersion>6.0</sdkVersion>
    <linkerOptions>
        
        <option>-licucore</option>
        <option>-framework GameKit</option>
        <option>-framework CoreData</option>
        <option>-framework StoreKit</option>
        <option>-framework iAd</option>
        <option>-framework MessageUI</option>
     </linkerOptions>
</platform>
And it works!
I looked into including the 2 .a files
    <packagedDependencies>
        <packagedDependency>libWebp.a</packagedDependency>
        <packagedDependency>libFlurryAnalytics.a</packagedDependency>
    </packagedDependencies>
I put the 2 files into my ane build folder and into my adt command line, but when I try to build the app I get an duplicate symbol error... so i took them out.
\o/

Bridging AIR-AP1131AG with TP-Link

Similar Messages

Maybe you are looking for