Bridging AX from Linksys WRT54G Router using Linksys ethernet port

My Linksys Router's wireless died. Since I need a wired connection (more reliable), I bought the AE hoping I could connect the AE to the Linksys and have the AE provide wireless access for my Mac. I set up the AE in Bridge Mode; however, there's no internet access.
The Linksys is providing my internet gateway.
AE Internet Setup Tab
Connect using Ethernet
Config. IPv4 - Using DHCP
Ethernet WAN Port - Automatic (Default)
Connection Sharing - Off (Bridge Mode)
The AE will work connected directly to my Linksys Cablemodem; however, I would lose my ethernet cability if I operated the AE this way.
If any other settings are necessary, I can provide them.

Never mind - I found something on Macoshints forum. All I had to do was change the DHCP setting to Manual on the AX and enter the DNS addresses when the AX prompted me to. Now I can access the internet.

Similar Messages

Help! Extremely slow Internet speed using Linksys WRT54G router

I have an eMac running OS 10.3.9 and wired to a Linksys WRT54G router using ethernet cable. I have to use this router for my work PC. I'm also using WildBlue satellite internet. The problem is, I'm getting about 1.5 Mbps on my PC, but less than 33 Kbps on my eMac. It was running faster before using dial-up. I've called WildBlue and Linksys tech support, and they can't help. Can anyone help?
By the way, my son is using his iBook on the same router, only wireless, and he's happy with the speed he's getting compared to dial-up.
Thanks,
Eric

1400 kbps is a lot nicer than 33 kbps, isn't it? You can possiblly tweak it a little more --- I know I've seen a MTU of 1460 mentioned --- since you can also revert back to the 1400 MTU setting you found.
(Broadband Optimizer is in one sense a nice GUI to the terminal commnads you found and used.)
One more thing to be aware of, satellite internet is subject to longer latency times than cable or DSL, due to the unavoidable geometry of bouncing data packets off a satellite in orbit. That could be an issue if you ever want to play real-time online multiplayer adventure type games. It shouldn't be an issue for being able to grab OS updates in minutes instead of hours, through. Enjoy your broadband access!

Why does the Linksys WRT54G router REQUIRE a hostname when it's never used?

Why does the Linksys WRT54G REQUIRE a hostname when it's never used?
I can't find a single use for the router hostname, yet the Linksys WRT54G version 5 firmware v1.00.6 wireless router REQUIRES a hostname, even though nothing actually uses that hostname.
Why does the router require a hostname (why can't we just leave that field blank)?

Date: Sun, 8 Jul 2007
To: [email protected]
From: "Debbie Hurley"
Subject: "Unnecessary Router Name Requirement" bug in WRT54G V5
This is to report a bug in the "Setup", "Basic Setup"
tab, "Router Name" field
(https://10.2.18.20/basic.htm) in the otherwise
wonderful Linksys WRT54G V5 wireless router (firmware
revision 1.02.0).
As you are aware, a router is a security and privacy
device; as such, it should not require identifying
information if that identifying information is not
needed nor used by the user or their ISP.
Such is the case with the "router name" field.
In the case of the "Unnecessary Router Name
Requirement" bug, I am reporting to you (and to the
associated Linksys forums at forums.linksys.com) the
Router Name field should NOT be required. It should be
an option to leave the Router Name field blank.
The fact that the router name field MUST exist
(whether or not it is actually used or desired), is an
obvious security and privacy flaw in the otherwise
wonderful Linksys WRT54G router. Please fix this bug.
Thank you very much,
D. Hurley
(Mod note: Post has been edited for non-compliance of forum guidelines.)
Message Edited by primus on 07-08-2007 11:13 PM
Message Edited by primus on 07-08-2007 11:14 PM

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

Successful DSL Setup With Westell 6100G and Linksys WRT54G Router

After a week of searching I finally figured out how to get DSL setup with my Linksys router.
All I could get out of the Westell > Linksys router configuration was DSL downloads limited to less than 0.2 Mbps.   No matter what I did on the router settings that was it.    I had a second eHome router that easily configured and achieved the 1.0 Mbps download speeds so that confirmed Verizon and the Westell modem were not the issue.
So what's wrong with the Linksys router configuration?    I had the Linksys WRT54G router Version 5.   Checking the firmware it was the original release of 1.0.0.   (See your routers instructions which can be downloaded from Linksys for how to check your firmware).   I downloaded the latest firmware version for this router model and version number.    Following the Linksys instructions I flashed the latest firmware 1.02.8.   Now I had an updated modem ready to be configured for DSL.
Assuming you already followed Verizons instructions to set the Westell modem to bridge mode setup your router to work with it.
Step 1: Go into the modem typing its address... Default 192.168.1.1   leave the ID blank and the default password is admin.
Step 2: Go to the Basic > Setup screen.
Step 3: Select PPPoE and the screen menus will change
Step 4: Enter your Verizon ID (exclude @Verizon.net)
Step 5: Enter your Verizon Password.
Step 6: Go to the bottom of the screen and hit Save.   Wait and the router will indicate it was saved.
That's it.  All you need are the three entries above to get it working. Turn off the PC, Router and Westell.   Turn on the Westell, then the router and then boot the PC.   It should work at this point.    I now get the full DSL speed for both downloads and uploads.
The bottom line....check you router, especially the older models for updated firmware before you give up on it.

Glad top see you found a configuration for your Westell and Linksys to function. Thanks for posting resolution.
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

AirPort Express drop-out / skips -- Windows XPSP2 w/ Linksys WRT54GS router

Hello,
I'm having some skipping / drop-out issues when streaming music from a Windows XPSP2 fileserver, which runs iTunes 7.3.2.6, to my AirPort Express. I've long suspected my LinkSys WRT54GS router. Here are some things I've tried:
* tried enabling logging on my AirPort Express unit, (I actually installed a Windows SysLog client and ensured it was working) but it reveals no useful information after a skip -- just debug logging. No change.
* changed the wireless channel from 6 to 11. No change.
* Do not have wireless security enabled (just don't broadcast ESS ID). No change.
* Latest firmware on router, AirPort Express, and iTunes. No change.
* All other wireless devices in the house turned off. No change.
I'm seriously considering buying a new wireless DSL router to see if it makes the problem go away (any suggestions to makes or models appreciated). Unfortunately my WRT54GS is not one of the routers that supports reflashing with a third-party firmware, or I would have done this eons ago.
Another thing I am not sure how to test is the signal strength that the Airport Express gets from my LinkSys WRT54GS router. I've not been able to figure out how to get this information, and I also do not know what are considered good / not-good strengths. Any help here would be great.
Here are some details.
AirPort Express with Firmware 6.3, communicating wirelessly over Channel 11 to my LinkSys WRT54GS router with firmware 1.52.0, into which my Windows XPSP2 fileserver is physically connected with CAT5 cable. The music files are served up on a Maxtor DiamondMax 10 7200 rpm 300GB Serial ATA-150 Hard Drive.
I've really tried everything I can think of, and I still get skipping.
Specifically, music will play fine for 45 minutes, or 5 minutes, or an hour; then, the music will suddenly stop. The AirPort Express will continue to have its green LED on, though. The music will resume 1-10 seconds later. This skipping will happen periodically for a 1-2 minute period, usually 2-3 times per minute, go away for an indeterminate amount of time; or, it might persist until I get tired and turn off my stereo. There is no pattern as to time of day so I don't suspect neighborly interference.
Other things in the house are an older 802.11b laptop, 5.8GHz phone, brand new microwave, and a few dozen Palm and Windows PDAs that all have their WiFis disabled, where appropriate.
Any suggestions or ideas would be fantastic. This has been a problem for a couple of years now which I have systematically (though unsuccessfully) tried to solve.
Thanks,
-Jeff

I haven't yet budgeted to buy a different router, but I'll respond when I do as to whether this was the fix or not.
Just an observation ... in your case, the music streams wirelessly from your laptop to your router, and then wirelessly again from the router to your Airport. That's 2 wireless paths it must go. In my case, music streams directly to my router with a LAN cable; then, wirelessly from my router to the airport. So that's only 1 wireless path, and even still I am experiencing problems.

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

Linksys WRT54G router--Why doesn't it work with my Macbook?

I have a perfectly functional Apple MacBook (Unibody, late 2008) running Leopard 10.5.6. I have used it to connect to public Wi-Fi but it is unable to connect to my home Linksys WRT54G router. I called Apple Tech Support, and they suggested that I change the wireless channel and/or temporarily remove the WPA encryption. I did both, the computer still could not connect. In System Preferences on the MacBook, it tells me that "AirPort does not have an IP address and cannot connect to the internet." The tech support guy tried to help, but in the end basically told me that the router just plain might not be compatible with Apple products. (My iPod Touch cannot connect either.)
I can buy a new router, but this one works perfectly for the rest of the computers in the house (PCs) and they're expensive--and there's no guarantee that those will work either.
So: Does anyone know any solutions short of buying a new router that would make my Linksys compatible with my Macbook AND our home PCs? Or, failing that, a good, WPA-encrypted router that WILL work with both?
I have a Snow Leopard disk (I just received the computer on Thursday). Would upgrading to Snow Leopard be of any help? I'm planning on doing it anyway one of these days.
Many thanks in advance,
Sola Gratia

You are in the wrong forum but I'll try and help anyway. That model of Linksys router has a long history of not getting along with Apple products. That is not to say it will never work, but it does require that you download and install the latest firmware for the exact model of router that you have. There are multiple sub-models of that router so make sure that you get the right one.
Once you have done the firmware update, restart your router and try it again. WPA-psk should work but for troubleshooting purposes, turn off encryption and see if you can get your MacBook and touch working. You might want to use WPA2-psk instead of WPA.
I would hold off on Snow Leopard until you get WiFi working. Nothing like changing to too many things at one time to really mess things up.

Cant connect IPOD to linksys WRT54G router

Hi, i have a LINKSYS WRT54G router .. i bought an apple ipod touch recently and i am unable to connect it to my wifi network. My ipod detects the wifi network but when i select it , it asks for password. now i dont know which password is this bcoz everytime i poer on my computer or laptop i never type a password b4 accessing internet.. it is auto connected. i know the admin password for my router but that is denied by ipod to connect to internet. Is there any other password we have to give for connecting deveices through LINKSYS or some changes i need to do in my connection ? PLzz help plzzzzzzzzzzzzz

you can go to this link for instructions on how to get your wireless password:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

Install WRT54G router, using the installation CD

I am trying to install a WRT54G router using the installation CD. The Easylink Advisor freezes when I choose the router type, and won't continue. Can anyone help?

Thanks for the offer. I finally did that this morning, and the router works correctly. It would have been nice to be able to use the CD as I understand the assistant has other capabilities to make changes easier. I guess Linksys doesn't want to fix the problem.

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

Moving router to different ethernet port

I live in an apartment building. When I got Verizon internet set up, the router was connected to a ethernet port in the closet. However, after getting a Network Extender for the apartment, I've found that it would be much more convenient to have the router plugged into a ethernet port in the living area, so the Network Extender could be close to the window -- otherwise, I have to run the GPS device from inside the closet to the other side of the apartment.
I tried plugging the router into this ethernet port, and my devices were all able to connect to the wireless network, but not able to access the internet.
Is there anything I can do to make the router work off the port in the living room?

You've posted in a DSL/Dial-up forum. Do you have DSL or FiOS?
What model of router and network extender do you have? None of the Verizon supplied equipment has GPS, so I'm curious about what you really have.
This info will up us peers give you better advice.
Thanks.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can I use the ethernet port ....

Can I use the ethernet port on the ATV to connect my blue ray p[layer to the internet using the ATV as a wireless card??
If so how??

I might be next in line on the airport extreme! Right now wireless is working better since the latest upgrade to iTunes, but hardwire is the way to go. Only problem is that ISP connections is in my office and my Home Media is downstairs. I was thinking of setting the Airport Extreme as a repeater in order to access ISP and then used the ports in the back for iTunes and ATV.

Bridging AX from Linksys WRT54G Router using Linksys ethernet port

Similar Messages

Maybe you are looking for