Bright box not working

My Bright box is connecting but not letting me use the Internet I'v tried turning it off & on again and resetting it by the reset button but nothing is working can someone help please?

Hi loobylu, There are a lot of different reasons why it may not be working. I'd take a look at this handy page as it includes a lot of instructions on how to fix connection issues with the Bright Box. Good luck and let me know how you get on!Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

Similar Messages

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

My Auto-Brightness is not working on my iPhone5

My IPhone5 auto-brightness is not working I don't know if it is a bug or what please help. Thank You

Destinie Harris wrote:
sberman wrote:
Resetting may help. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
You only want to do this if your iPhone won't turn on or off and is completely frozen. Instead, try Resetting all settings in Settings > General > Reset > Reset all Settings
I completely disagree. Reset All Settings (your suggestion) would reset the OP's preferences and settings. By contrast, resetting the iPhone (as I suggest) changes no preferences, settings, or any other data. It simply starts the iPhone over, with no data loss.

(fn+F2 and fn+F3) for brightness are not working

(fn+F2 and fn+F3) for brightness are not working, while the other function working properly... help me plz
DJanoon

What is the product number?
Did anything change before this started happening?
Power the system on and press F10 about once a second to get into BIOS. Once you are in BIOS, go to the configuration tab (typically next to last tab) and set Action Keys to enabled. Save the changes, exit, and the system should reboot automatically. Test the brightness keys wihtout pressing the Fn key. I suspect they will not work in this state, but I want to rule out the possibilities while awaiting the product number.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Brightness key not working with Dell monitor

Should my new wireless keyboard brightness keys be working with my Dell monitor?

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

Auto brightness does not work aftery iPod touch. Is this intended by Apple, or is it a bug?

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

Brightness key not working after upgrading to win 10

MY laptop has been upgraded to win 10, but after the update brightness key is not working.

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

Connect the computer to the power.
Hold the power button down for 10 seconds or more.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Volume and brightness keys not working with new keyboard on imac

I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

CISCO Box not working with Infrared Remove Control Repeater

There was an Infrared Remote Control Repeater set-up in my newly purchased house. It works for my LG DVD player, but does not work with my CISCO CHS435HDB box. Are there any work around for this? Should I change to a different box?

If you are using a repeater, make sure the piece that is relaying the IR signal is pointing directly the font of the Cisco box and nothing is plugged into the IR input port in the back of the box.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Text Entry Box not working right??

This is strange…. If anyone has any thoughts…
that would be great.
I have a slide that tests someone's knowledge for inputting
into a text entry box. I want to give them 2 tries for doing this
task - and if they don't perform the task correctly, I want an
error message to display. However, I want the error message to be
different based on the 1st time that they try and the second time.
The method to accomplish this.. I have done many times, and has
always worked. However, for some reason, it's not working this
time.
In order to customize the error message based on whether it's
the 1st try or the second - I have created 2 text entry boxes.
The first text entry box is set to display at 0 seconds, is
set to display for 2 seconds and is set to pause after 1.5 seconds.
If the user enters a successful text entry the user will be
navigated to the next slide, if the user enters an incorrect text
entry they will continue on the same slide and a failure caption is
selected to display (this is the first error message that displays
for the first try.)
The second text entry box is set to display at 2 seconds, is
set to display for 2 seconds and is set to pause after 1.5 seconds.
If the user enters a successful text entry the user will be
navigated to the next slide, if the user enters an incorrect text
entry they will continue on the same slide. No failure caption is
selected to display. This is the important point... I have not
selected for a failure caption to display for this text entry box.
I have a text caption that displays at 4 seconds - this is
the second error message that the user will see if they input an
incorrect text entry into the second text entry box.
Everything seems to work fine except... for some reason, when
I enter an incorrect text entry into the second text entry box, I
get the failure message that I set for the first text entry box.???
Very strange. I have recreated this 3 times - each time it works.
Then, all of a sudden, it stops working. I’ve even tried
recreating the movie from scratch… but same results.
Any thoughts?
Thanks,
Lynn

Hi again
Okay, makes sense. I suppose in this case, I'd simply use
another slide. From what you have explained, it would appear there
is a possible issue Captivate is having with multiple text entry
boxes on the same slide.
So I would insert a slide following the existing slide. Then
on failure of the first text entry box, direct to the next slide.
On success of the first text entry box, skip over the new slide to
the proper "continue" slide.
Hopefully that makes sense... Rick

Box not working, told must wait 12 days for engine...

I have a very old BT Vision box and over the last few weeks it's been slowing dying. At least three times it completely erased all the recordings saved. We would re-set it to factory settings and just carry on using it, but after about a week it would wipe the memory again.
I called the helpline to report the issue last week and the call agent was rude and patronising. I explained the issue but he seemed to not understand me. He asked 'Does it not allow you to record or does it not let you watch the recording?'. I said, again, it does neither of those things, it works mostly fine but occasionally wipes the entire memory. He tried again, this time speaking loudly and slowly as if to a particularly difficult child, 'No, does it not let you record, or does it not let you watch the recordings?'. I explained again, and he then asked me to reset the box. I explained, again, that I'd already done this several times and he said: 'Well that's why you've lost your recording then'. After another 5 minutes of going around in circles (and re-setting the box once more) he went away for quite a while and then came back and asked if the recordings that had been deleted had had an exclamation mark next to them. I ended up hanging up on him.
Anyway, I no longer have the option of ignoring the issue because the thing is obviously on its last legs. It has since stopped and started mid-way through recording things (and then deleted them several hours later), frozen several times whilst on both BBC iPlayer and ordinary television, and made strange grinding noises.
I phoned again today and was told that they couldn't send me a new box, but rather I would have to have an engineer. This seems a waste of time given how ancient the box is but I said ok. They then told me the first date the engineer could get out was 28/12. I said I thought this was disgusting but was told there was nothing sooner. I know it's only television, but not having a working TV over Christmas is a real inconvenience and really not what you expect when you're paying this much money.

BBbox wrote:
Not quite the reply I had hoped for, but I see where you are coming from. However, we are now singed up to a 12 month contract. The trouble is that where we are now living the broadband can't come via sky without coming down the bt line hence going over to bt. Does talk talk do the tv as well?
Stalk Stalk? Ohh err! NOT!
When you say its (the box) stopped working, do you mean you get just a blank screen? Not even Freeview?
Rank - Mostly Harmless.

Search box not working in Web site

Anybody knows why the search box at the following address is not working? Type any word in there, even if it is contained several times in the blog, and you will get no result.
http://tinyurl.com/6s4gcr
I have been trying for months to get an answer from Apple, without success. The MobileMe people say it is an iWeb problem. And the iWeb people say it is a MobileMe problem.
The problem was there with iWeb 2 and is still there with iWeb 3.
And please do not tell me to republish entirely the site. It has been done already several times, including on a MobileMe test server.

Bernard ~ +"A lot of problems can be solved simply by..."+ Read more in the "Fix iWeb" section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Brightness OSD not working in 64 bit Windows 7

Hi,
After having used the laptop for a long time with a 32 bit Windows 7, I've upgraded the RAM and added an SSD, and reinstalled with a 64 bit Windows 7. Everything works great, some things even better than before (used to have occasional problems hibernating, but not anymore). However, there is one small, irritating problem:
The brightness OSD is not working, even though the buttons do control the brightness and every other OSD is working properly, only this one isn't.
After installing windows, I've used the ThinkVantage System Update utility to install everything. Then I tried installing all kinds of drivers seperately. So far, no luck.
I'd really appreciate some help resolving this issue.
Thanks a lot

I've tried several different versions of the On Screen Display from the Hotkey Features Integration for Windows 7, including 6.60.03, 6.60.01, 6.60.03, 6.42.00, 6.24.00. And every time, it's the same thing. Everyhting works but the brightness control OSD.
What else can I try?

Bright box not working

Similar Messages

Maybe you are looking for