Brightcove video through BM

Hello all,
I am having an issue with brightcove media. Brightcove.com provide media for sites like the history channel. When we visit the site, the prview of the video comes up but we can not get the actual videos. It seems to be any site that uses flash video through brightcove.com.
We currently run BM 3.7 with all up to date patches and proxycfg file from Craig's web site.
Anyone else have this problem and have an easy solution? I do not want to spend too much time on this one as we are planning on replacing our BM 3.7 servers with new hardware and upgrading to BM3.9 in the very near future.
Thanks,
Steve D.

In article <[email protected]>, Sjdimare wrote:
> Anyone else have this problem and have an easy solution? I do not want
> to spend too much time on this one as we are planning on replacing our
> BM 3.7 servers with new hardware and upgrading to BM3.9 in the very near
> future.
>
Can you give exact URL's and testing sequence to show the issue? I can
try it through some BM 3.9 servers, and if you give easy-to-follow testing
procedure, others usually give it a try also.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Similar Messages

  • Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

    updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

    It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
    Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
    As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
    Here's a thread that helped me with iPhoto:
    https://discussions.apple.com/thread/4794375?start=0&tstart=0

  • I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
    http://support.apple.com/kb/HT1454

  • Ipod freezes when playing video through dock

    Okay, this is a challenging one. I will be surprised if someone can help me figure this one out, but I will be very grateful!!
    Picked up a brand new 60gb 5th generation video ipod the other day. 1.1 update already installed. Everything worked great. Was able to play videos through the AV dock, no problem, and was able to hook it up to the JBL stereo for the ipod, no problem.
    Here is where it gets interesting. I took an avi video from my digital camera, and used Quicktime Pro to convert it into a .mov Apple Quicktime movie. I am using Windows XP. I then imported that .mov movie into itunes. Then I right clicked on the file and told itunes to convert it into the ipod format. I then hooked the ipod up to the computer, and the video was transferred to the ipod with no problems.
    Then I was able to play the video with no problem on the ipod screen (not hooked up to the AV dock). Then I inserted the ipod into the AV dock that is hooked up to my tv. I played videos this way without a problem, before I loaded this new home made video. When I played the new video, I answered Yes to Tv Out, and right after that point my ipod froze up. No video played at all. Then I had to reset my ipod.
    I tried this again several times, with the same result. This was now happening with regular videos that I downloaded from itunes. Also now, when I hooked the ipod up to the JBL stereo, and just tried to play a song, the ipod would freeze up. However, songs and videos play fine when the ipod is not hooked up to a dock.
    It seems to me like my home made video somehow corrupted the software drivers for the port on the ipod.
    Then to fix the problem, I finally had to do the dreaded RESTORE. I could not update the ipod, because I was already at version 1.1. I tried rolling back to an earlier version, but the updater told me that the update was not compatible with my ipod.
    The RESTORE did fix the problem. The ipod was completely back to normal. I could hook it up to the JBL and the AV dock with no problems. Until...yes, I tried playing the home made video again. I just wanted to see if it was a fluke. Same problem came back....arrghhh!
    He is another weird observation. I can start the video playing on the ipod, without it hooked up to the dock, and answer Yes to tv out. The video starts playing, then I can insert the ipod into the dock, while it is still playing, and the video plays fine on the tv, through the dock! Until the video finishes. Once the video finishes, the ipod freezes up again.
    I wonder if this is a hardware problem, and I should just return my ipod. It seems like a software problem to me. I think if it is my home made video that is corrupting my ipod, I think itunes should be smart enough to not copy something to my ipod that is going to corrupt it.
    Ha..ha...wow, sorry that was very long-winded. Anyone have any suggestions?
    Dell Dimension 2.8ghz P4   Windows XP   2.25GB of RAM

    All I can suggest is to re-encode the video as m4v with QT Pro, there might've been a problem in encoding. Also, try sending this same video (setting TV Out to Yes) with the iPod not plugged into the dock and with an Apple RCA cable, if you have one, hooked up to a TV. If that works, the dock connector might be damaged (unlikely) but it's possible. So once you've re-encoded, see if the dock situation works then. Good luck.

  • Ipod nano won't display video through xtremeMac tango

    I have an extremeMac tango which I use to play videos off of my 5th gen ipod video (or classic) 60gb. We recently got a brand new ipod nano 5th gen with video 16gb and it will not play the recorded videos through the tango. Any suggestions?

    Call the manufacturer to find out if the iPod Nano 5th generation is compatible with their product.

  • Can I watch video through my iPhone and TV at the same time?

    Can I watch video through my iPhone and TV at the same time while using the Apple composite video cables? I am planning a trip in my car and would like to play videos for my kids through their video screen while my wife watches on the iphone from the passenger seat. I didn't want to spend $50 to find out it doesn't work.
    Thanks in advance!

    It doesn't work that way, sorry. When video out is being utilized, only the movie artwork (the cover or image) is displayed, and the actual movie is not displayed on the iPhone's screen.

  • Sound but no video through composite and s-video

    I have a QIP2500-3 STB. My tv is a FHD2400, its a monitor by Gateway.
    There is 2 other QIP25003 STB around the house. As welI, also get only sound and no video while using S-Video.
    I've checked the wire, and there is current flowing but no signal.
    Coax works fine, its only s-video and composite that does not work on all 3 of my STB.
    I have tested the S-video and composite on my monitor with a DVD player and using the Wii. They work fine, its only the STB that does not display video on these ports.
    The STB has displayed video through S-video and composite before. But that was before a black out that had occured.
    After the blackout, S-Video and composite DID NOT work at all.
    How do I get the STB to display video using those ports?
    OR
    Should I simply replace my STB?

    Never had any issues with the S-Video or composite on my 2 2500's.  Sounds like something may have fried during your blackout.  I would attempt to get the boxes replaced or get a service call.  I might also suggest adding surge protection to all the boxes (a UPS would be even better) if you don't have it already.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Importing VHS video through digital camera

    I am importing VHS video through my Sony camera (TRV22) to imovie.  For some reason it the screen will go blue for a few seconds then the picture will come back.  I was doing this on a older power pc mac and imovie would just stop recording.  On my new imac it doesn't stop recording but the screen goes blue.    Has this happened to anyone else and maybe know what is causing it?  Should I try a different way of video transfer with some other software?  Thanks for any help you can give me.

    Two possible causes:
    Faulty or badly connected cables
    You are not using Firewire

  • Embedding Brightcove Video?

    Does anyone know how to embed Brightcove video in a project? Or better yet, has anyone had any luck doing it? I can't seem to do it...
    Thanks in advance,
    Louis

    Solved! I followed your suggest publishing the project as a Scorm package in my site and I noticed that the video was just showed for a second and then it disappeared. So I checked the duration time of the slide, setting it as long as the video duration and... that's all: it works! Thank you very much.

  • I am having trouble running videos through Safari but not Google Chrome.  All I get is a black screen.  I have the latest adobe flash update and have enabled plug ins.  any suggestions?

    I am having trouble running videos through Safari but not Google Chrome.  All I get is a black screen.  I have the latest adobe flash update and have enabled plug ins.  any suggestions?

    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Not empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Now try a video.

  • Playing videos through an xbox 360 or a tv?

    Is there a way to play videos through an xbox 360? I know you can play music through it but I just wanted to know if there is a way to play videos also.
    also, is there a way to play my iPod through my tv?
    Thanks,
    Sam

    I am not too sure about an XBox 360.
    Although you can play it through your TV, provided that you have the right cables needed.
    Apple Store: iPod AV Cable
    If you have this cable then on your iPod under Video Settings select Tv"Off" and change it to TV"On" this will output the single to your TV.

  • Video through Panasonic HT?

    Hello,
    After doing some research, I have found that the Touch requires either the Apple-branded component / composite cables or an approved system (presumably the system performs the authentication). Does anyone know of a list of these systems?
    I am trying to troubleshoot the lack of video through a new Panasonic HT. Audio works great, but for video, the system tells me to connect via component. I currently have the HT connected to TV via HDMI.
    Panasonic website and manual both say the same thing, but do not specify Apple cables only.
    Thanks!

    You need the Apple cable either composite or component, others wont work since the 3rd Gen Nano came out. The link for the composite is below.
    http://store.apple.com/us/product/MB129LL/B?fnode=MTY1NDA0OQ&mco=MjE0NTAzOA
    I have this cable and it works with the Touch.

  • Can I play sound through IPad but watch the video through TV ?

    I want to play sound through IPad but watch the video through TV  using Apple TV
    Is that possible ?

    On my mac through itunes, I am able to control Apple TV sound through a master and two sub master volumes.
    One being my Apple TV volume (HDTV) , and the other being my mac (internal speakers).
    That being said, it might be possible to on iPAD through itunes (music).

  • HT2729 why can i not watch a rented video through apple tv

    why can i not watch a rented video through apple tv

    why can i not watch a rented video through apple tv

  • How do I play a video through a connection to a projector?  I have the connector for the iPad.

    how do I play a video through a connection to a projector?  I have the connector for the iPad.

    Good job Chris!
    You can also go into iTunes Preferences, select Playback, and check the Play videos: tick box, then select from the following:
    in the main window
    in a separate window
    full screen
    C

Maybe you are looking for