Brightness and Fill adjustments absend from Develop mode

Recently upgraded to LR 5 and - when in Develop mode - am no longer presented with the Brightness and Fill selections. Am I missing something or is there a configuration change I can make?

Brightness and Fill are from legacy process versions (2003 & 2010).
The current process version (2012) doesn't have them.
Consider finding an intro tutorial to watch..

Similar Messages

HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

Fixed it!
1. Made sure itunes software was up to date
2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
3. Connected to itunes
4. Pressed restore and update ipod
Update successful and ipod taken out of recovery mode

Questions on Analyzer Upgrade and Moving Analyzer Reports from Development to Production

Hi,We run Analyzer 5.0.3. We are planning to go to Analyzer 7.2. Did any body go thru this upgrade? If so, what is your opinion and tips that may help. Also, we never had Analyzer development environment. We are planning on having Analyzer development environment. In our installation, all of the Analyzer reports are centrally developed based on user requests. Once we have development and production at the same Analyzer version, if a report is developed in the development system, how can the report be mirateed/moved from development to production system?Thank you for your help,Prasant

Balaji,
Has this been done yet?
Gary
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
We are working on a document using which one should be able to move a portal instance from one database to another. It is still in draft version, once it is finalized we will be putting it on otn.
Thanks and Regards
Balaji<HR></BLOCKQUOTE>
null

Update to 10.6.3 and having problems returning from sleep mode

Hi,
Updated yesterday to 10.6.3 and having issues returning the laptop from sleep mode.
I close the lid and the laptop goes to sleep but when opening the laptop I just get a blank screen. I can hear the hard drive start up but nothing is displayed on the screen and the sleep light is constantly on. Have tried various combinations of key presses to get it back but nothing works. I end up powering the laptop off in the end.
Anyone else have this problem? Or know how to resolve it.
I have run daily, weekly, monthly maintenance scripts, cleared system and user cache and repaired disk permission but I'm still getting the issue. I have a Time Machine backup but it dates back a month so I'm reluctant to restore.
Cheers,
Luke

I'm having a similar problem that I may have cracked. My screen is on but the backlight is off (so the image is practically 100% on resume from hibernate. Have you reset the pram and cleared the smc?

Why "previous" box and sometimes "sync" box in develop mode.

In Lightroom 4 develop mode, I have noticed that at the bottom of the righthand column there is a button, sometimes marked "sync" and at others marked "previous". It seems to change randomly between the two and I don't know why. I prefer it to be "previous". Can anyone explain why it changes and what I can do to return it to "previous" if it has changed to "sync"?
Thanks.

Hello,
It changes to Sync when you have more than one image selected.
Frans

Unable to match monitor brightness and prints when printing from lightroom.

Trying to figure out how to print the brightness of what I see on the monitor. Running a windows 8 box with current Adobe creative cloud account. Trying to print directly from lightroom. Have a colormunki display and have calibrated the monitor which helped a bunch. Also turned off the color adjustments in the printer settings. Currently the monitor brightness is set to 0 (by the munki). Am printing on a canon pixma 9500 mkII and my printer drivers are up to date.. This is not just me being picky it is just plain off. Am printing on Moab Lasal Matte and/or Moab Pearl metallic and am also using the correct icc profile for it. If I raise the exposure to see the darker areas, my colors wash out. If I print where my calibration tells me to, the prints are too dark. Am having issues finding a middle ground. Even tried to raise the print adjustment brightness with no difference. With all that I have done and spent, I really feel like I should have better results. Can someone help?

Andrew Rodney has written the definitive answer to this issue: Why are my prints too dark? Article on Luminous Landscape
In summary the luminance of your monitor is to bright - try turning the luminance down to about 100 cd/m2.
Exactly what monitor luminance is ideal for your editing environment is a trial-and-error process.
Viewing conditions are also important.
A print that is too dark for a dim viewing environment may be ideal in a much brighter environment.
Tony Jay

Creation and transportation of query from development to simulation system

Hello experts,
I need to create a new Query in the development system in the General Ledger folder in Financial reporting. and then I need to transport the same to the simulation system. what are the correct steps I need to follow to do the same if have to avoid any issues during this transportation.
Do I need to do any modifications to the role ZS_XX_BEX_MENU and transport the same?
Could anyone help me in this regard giving me the exact procedure I need to follow.
Regards

No need to modify, but if it is $temp then change it has ur won request.
follow the genral procedure
1)In RSA1 Go to Transport tab and collect ur query.
Drag to right screen
If it is in $Temp change it to your own request. For this You may need Access.
2)Query contains all objects which were used in that query.
if any Info object that are created newly then check for Transport
3) Then, finally click on transport(Truck) icon
4) By default, it will collect all new objects including newly created Info Objects also. You can change the collections of your own selection.
You will get a Request Number here. Please save this Number so that you can check this at SE09
5) In SE09 search for your Request Number.
6)Release The request by subsequent process onwards( Means sub contents like infoprovider first and then Query)

While restoring my iphone3gs it shows error(-1) and cant get out from restore mode,kindly suggest me??

Kindly suggest me how can i get out of the restore mode bcoz whenever i want to do it it shows error (-1) before complition....

Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Exporting and Importing a page from Development to QA to Production

Hello
We have tried in various ways to export a simple page (it has only one HTML portlet) and import it into another Portal 309 instance.
The page imports fine (always imports with PORTAL30 as the owner!!) except HTML portlet. For some reason HTML portlet never gets imported. We tried with a calendar portlet and it gets imported fine. We don't have content areas etc. It is a simple Page with one HTML Portlet!!!!!!!!!!!!!!!!!!!!!!!
Why is such a simple thing not easy enough?

Tam,
Try to import the html portlet first. Check the portlet respository, see if the html portlet is in the respository.
Then import the page.
Kelly.

Move Custom Value Sets and Custom Concurrent Programs from Dev to Test

Hi,
Friends,
I want to move the Custom Value Sets and Custom Concurrent Programs from Development to Test Instance...how can i Acheive using FNDLOAD....
At a time single stroke can I move them using FNDLOAD...
Please help me in this regard....

You can do it with FNDLOAD.
http://appsdbablog.com/blog/2006/09/fndload.html
Aviad Elbaz

T61 - WWAN does not connect when resuming from sleep mode

Hi.
I have a T61 with integrated WWAN, which works perfectly - except I use sleep mode a lot, and when i resume from sleep mode, WWAN doesn't connect, I always get the same error - IP configuration failed. If I restart my OS, WWAN works normally again.
So far i have tried on Windows XP, Vista 32, Vista 64 and Windows 7 32 bit - always the same!
I connect via Access Connections, maybe there is a known issue?
Thank you, B

This bugs me as well. With the new Verizon software I just installed, it says "Adapter Disabled" when I resume from sleep.
I suspect a driver bug that needs to be adressed.
I use Vista Business 32bit, but had the same problem with XP.
Don Mannino

When Cpu awakes from Sleep mode, sound doesn't w

I am running Vista Ultimate 32bit and when awaking cpu from Sleep mode, seems like sound driver doesn't load. I was haveing the Blue screen but fixed that with updated video driver. I am running latest sound drivers and Vista is up to date. Is there a "hot fix"?Here are my specs... Q6600 G0Evga 680i A bios p3Evga 8800 Ultra 69.28W.D. 750gb sata2xGb Ocz 9200X-Fi FatalityCorsair 620hx psuAntec p82Logitech mx5000 keyboard&mouseLogitech z5500Samsung 242mp @ 920x200 60Hz?

Hello hmnshgrwl,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
Best of luck,
Mario

I am an absolute newcomer to Lightroom. I have downloaded images from camera (OMD EM1) and divided them into folders. Some folders work ok in Develop mode. With other folders I get the words "This file could not be found". What should I do

As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found". What should I do?

may i suggest opening the files in Olymous Viewer 3 and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files
The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
. The tiff files just LOOK better in LR after the conversion . there is a youtube on this subject and when i tried it myself i was impressed

How to export photos with editing from preview mode to hard drive and external hard drive?

I have applied changes to the photos in the preview mode. Unfortunately, I can't export them from preview mode to hard drive and external drives. Whenever the external drive is plugged, the changes I made are not applied to the photos on the both hard drives.

Sorry what do you mean Preview Mode? There is no Preview mode or module in LR. There is a Library and Develop module in LR. The Library module does have the ability to do some adjustments and the Develop module has all the image adjustments.
In any event to export an image you can either right click on it and select Export or when in the Library module you click the button that says Export.

Develop Mode Auto Adjustments

Hello,
When I am loading RAW files in to LR, in the Develop mode they start off as a pretty flat image (as I shot them) but then LR slowly adjusts each photos as it loads which looks like it is bumping the saturation and contrast then lowering the exposure.
What are these auto adjustments and how can I turn them off? I would rather edit my images as shot in camera, not after LR makes its own adjustments without my help.

Ryan.Polei wrote:
This doesn't happen in Bridge
The difference: Lightroom is a raw editor, Bridge is not.
So, Bridge shows you what the camera did (if unedited raw file) instead of what it would look like with Lightroom edits. And Lightroom edits have to start somewhere, and that somewhere CAN'T be the same as the jpeg, or the same as another raw editing software (they use different settings, different software, different starting point..).
Don't get me wrong: I think Adobe should have better support for displaying embedded preview / sidecar jpegs (which is what Bridge does), and have an option to detect in camera profile setting and select a "nearest fit" Lightroom profile, but none of that will change the basic "deal" - different software, different settings, different starting point...
Note: this may seem odd to you now, but it's how all proprietary raw editors work, i.e. all those except the camera manufacturer's own (or those using the camera manufacturer's raw-rendering toolkit under the hood, instead of it's own), which emulates in-camera settings pretty-much exactly - no others can interpret a custom picture style, granted some may try to start with a somewhat closer look.
To review: all proprietary raw software does the same thing: interpret raw data according to invented algorithms and settings. That's what Lightroom software does, and that's what Capture NX2 does (and that's what your camera firmware does to come up with the jpegs), but they are different software, with different algorithms, which use different settings.
So your choices are:
* shoot jpeg
* use the camera manufacturer's software to process, or
* wean yourself from custom camera styles and learn to setup Lightroom processing instead.
PS - I recommend the later. Actually, you can use a plugin to somewhat translate camera settings to Lightroom settings, but I don't recommend doing it, because it tends to prolong your dependency on camera settings, rather than wean.
My advice? - Learn to use Lightroom (and get it set up optimally for your druthers) for post-production, and forget about camera settings whilst shooting (except for exposure and focusing etc., of course). Then, delete all the custom profiles you created in your camera, for therapeutic purposes .
Rob

Brightness and Fill adjustments absend from Develop mode

Similar Messages

Maybe you are looking for