Brightness key not working after upgrading to win 10

MY laptop has been upgraded to win 10, but after the update brightness key is not working.

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

Similar Messages

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

Hello need help on weird happenings to my keyboard..
Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
All keys on keyboard is working and touchpad is also working.
But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
what do you think is the problem??
Hardware Issue? or Driver Issue?
please help thank you..

Hello @MysticDragon ,
Welcome to the HP Forums!
I understand some of the keys on your keyboard are not working after installing Windows 7.
I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
Try this:
1. Click Start.
2. Click Control Panel.
3. Click Clock, Language, and Region.
4. Click Region and Language.
5. Click the Keyboards and Languages tab.
6. Click Change keyboards...
7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
8. Click on any other keyboards in the Installed services list.
9. Click Remove.
10. Repeat for all other non-English (United States) keyboards.
You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

AltGr key not working after upgrade to Xorg 7.3

So, I upgraded to Xorg 7.3, and everything seemingly worked fine.
Then I tried writing an e-mail address, and pressing AltGr+2 which should give me an (at) symbol didn't work. After fiddling about abit, I concluded that AltGr did not work at all.
I tried the suggested solutions in the wiki, but none worked for me. I also tried setting Option "XkvVariant "nodeadkeys", but no luck there either.
Here's the keyboard section of my xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "no"
Option "XkbVariant" ""
EndSection
This worked like it should before the upgrade.
As you may have noticed, I have a norwegian keyboard. And if it helps, it's a laptop keyboard - I have a HP nc8430.
Pressing and releasing AltGr in xev produces this output:
FocusIn event, serial 28, synthetic NO, window 0x2200001,
mode NotifyUngrab, detail NotifyAncestor
KeymapNotify event, serial 28, synthetic NO, window 0x0,
keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
I'm not entirely sure if this is relevant tough.
Any help will be greatly appreciated.
EDIT: I should perhaps add this:
I'm not using a composite manager like Compiz or Beryl, and I do not have composite nor AIGLX enabled in my xorg.conf.
I'm using the fglrx driver.
Last edited by sunn (2007-11-07 16:28:46)

It seems the problem has resolved itself. I did a pacman -Syu today, and although only libsamplerate was upgraded, my AltGr key functions properly again. Kind of weird, as libsamplerate seems to have something to do with audio.. But hey, it works, and I'm not complaining.

BIAS SoundSaver Input Level Not Working after upgrade from Win 8 to 8.1

Have been using BIAS SoundSaver for INport software to digitize music LPs and cassette tapes to load on MP3 player. Worked fine with Windows 8. However, now that I have upgraded to Win 8.1, I can get sound of LPs and cassette tapes but the Input Level that controls the recording level on the software no longer functions. My computer is an HP ENVY Phoenix h9-1355 Desktop Computer with IDT High Definition Audio CODEC. I am wondering if the problem may be with the audio drivers installed on the computer.
This question was solved.
View Solution.

Hi @Alkay
I see that you are having sound issues after your 8.1 upgrade. Did you update to the 8.1 versions of the drivers?
They may be found here: HP ENVY Phoenix h9-1355 Desktop PC Drivers
Is it only the one application seeing this problem?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Screen brightness keys not working after 5.0 update on Windows 8.

I believe the drivers for the screen aren't working since changing the brightness manually in windows isn't working either. There is also an error with the intel hd 4000 graphics, if that has anything to do with it. This problem did not occur before I downloaded the new drivers for windows 8.

Same thing is happening to me as well, just posted about it 30 seconds ago. PLEASE HELP

External monitor not recognized after upgrading to win 10

After upgrading to Windows 10, my external Samsung monitor isn't recognized. Not sure if I need new drivers from HP or Samsung (they say they don't have anything for me, of course).

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

Some keybaord keys not working after suspect virus on Tecra A

Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.

Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why!

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ThinkPad X240 WWAN not working after upgrade to Windows 10

Hi, My 3G Card stoped working after upgrade to Win 10.I tried latest drivers from Lenovo but with no success. When I open Device Manager the Card is shown as properly installed but the driver manifactire is Microsfoft not Lenovo/Ericsson When I try to reinstall the driver the installation package poppup a message 'No action was taken as a system reboot is required'On the network connections the Mobile Netork is disabled:after trobleshooting on the connection I recieved and error: witch code 36. Is there a solution available ? regards,stuckoff

Which Operator and Country SIM card you are using ?Error Code 36 is regular deactivation. Do a Windows update , Restart then Shut Down System and start ( TYhis Power cycles the Device ) . From your Screenshot it Looks like the Cellular Data is not ON and Microsoft cellular service is in some mismatched state after upgrade.After restart press like in below screenshot order 1 --> it turns cellular on or off, 2---> It will take you to settings page 3--> Connect from here. Dont ask why Microsoft made connecting to WWAN device so complex

Windows 10 - No sound and mediaplayer does not work after upgrade

Hi !I can't get the sound to work after upgrade to win 10, - and windows mediaplayer will not openmp3's -- I get video on the VLC - but no sound... If anybody can help me, - please post a direct link to the driver I have toreinstall.. Thanks CarstenNorway

Thanks for the answer- but I mangage to solve the problem my self this time... I just did go to controlpanel - and clicked right button on the mouse - and updated both sound drivers thatI did find in there. After restart of the lap - everything worked ut well.. I am supprized !! Carsten

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Brightness key not working after upgrading to win 10

Similar Messages

Maybe you are looking for