Brightness levels reset to default on restart

I'm using iBooks & find it frustrating that if I change the brightness level, the new level is not remembered & find it reverts to the default level each time I re-open I-books. Perhaps this issue could be rectified at a future version revision?

Try completely closing out of iBooks: from the Home screen double tap the Home button, once the multitask bar appears hold down on the iBooks icon until it starts to jiggle, press the red icon in the corner to close out of iBooks. Now restart the iPad and see if this might help resolve the brightness issue.
Alternatively instead of a restart you could perform a Reset once you close iBooks. Reset: hold down the Home and Sleep/Wake button at the same time for ~10sec, ignore the Slide to Power Off, the iPad will then Reset, Note: No data is lost during a Reset.
if the problem continues you might need to delete iBooks and then redownload it from the App Store. if none of the suggestions provided dont help resolve the issue then I suggest leaving feedback here:  http://www.apple.com/feedback/

Similar Messages

  • LCD brightness level automatically reset

    Dear Experts and other user,
    Started from yesterday, my T61 laptop LCD brightness level automatically reset to lower in everytime i started it. I needed to manually tune up the brightness level.
    The laptop is firmly connected to the AC power. And i have did nothing under the Windows system. Is it any hardware issue or software configuration issue?
    Many thanks with your attention and advise.
    ED

    My "energy saver" pref does NOT have the options for "Automatically reduce the brightness of the display before the display sleeps" item mentioned above. It has only the 4 following entries:
    Wake Options:
    -Wake when the modem detects a ring
    -Wake for Ethernet network administrator access
    Other Options:
    -Allow power button to sleep the computer
    -Restart automatically after a power failure
    This option does show up in the help file and I am imagining that I either don't have the hardware to support it or it is geared for laptops.
    I have tried using the terminal to issue a pmset command (logged in as root of course) to see if I could affect this behavior.
    pmset -a lessbright 0
    pmset -a halfdim 0
    neither of them showed up in the file:
    /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    contents:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Custom Profile</key>
    <dict>
    <key>AC Power</key>
    <dict>
    <key>Automatic Restart On Power Loss</key>
    <integer>0</integer>
    <key>Disk Sleep Timer</key>
    <integer>180</integer>
    <key>Display Sleep Timer</key>
    <integer>69</integer>
    <key>Sleep On Power Button</key>
    <integer>0</integer>
    <key>System Sleep Timer</key>
    <integer>69</integer>
    <key>TTYSPreventSleep</key>
    <integer>1</integer>
    <key>Wake On AC Change</key>
    <integer>0</integer>
    <key>Wake On Clamshell Open</key>
    <integer>1</integer>
    <key>Wake On LAN</key>
    <integer>0</integer>
    <key>Wake On Modem Ring</key>
    <integer>0</integer>
    </dict>
    </dict>
    </dict>
    </plist>

  • Mac OSX 10.7.4 mouse scroll resets to lion default after restart or shutdown

    I use a Logitech M570 with my late 2009 Mac Mini and like to have my scroll set to the way scrolling should work with a scroll wheel and how it has work for year before Apple decided it was wrong. Well after I updated to 10.7.4 my mac now wants to reset the scroll to the new way Lion does it after every shutdown or restart and its starting to get really annoying. Does anyone know a way to fix this or a way I can bring this to Apple's attention so they can fix it.

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the Recovery screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Strobing Screen on MBA (all brightness levels)

    I seem to have gotten a Mac with all of the above.
    Losing WiFi connection, and not being able to turn WiFi back on.
    Screen randomly going black after sleep
    And now the new addition to the list:
    Screen flickering at approx 25 frames per second on all brightness levels on both battery and. Restarting randomly fixes the problem, randomly does nothing. I have reset the SMC / PRAM. Seems this otherwise beautiful baby is going back .
    Add yourself to the thread if you're experiencing the strobing effect.

    I have the same strobbing or pulsing back light problem. I really regret getting this new MBA. The 2010 model had none of these issues. My laptop doesn't wake from sleep randomly, when it does it takes forever to actually resume and now this black screen with the flashing backlight. Apple needs to address all these issues ASAP or I'm going to ask to return this thing for a refund!

  • 2602e Reset to Defaults Except IP not Work over Web GUI

    Hello,
    1. Set a Static IP
    2. Apply & Save Configuration
    3. After Reboot the IP is correct.
    Then do Reset to Defaults Except IP in the WEB Gui.
    After Reboot the AP loos the static IP and get a DHCP Address.
    Reset to Defaults Except IP = Reset to Defaults !
    Whats Wrong ?

    OK, here is:
    Writing out the event log to flash:/event.log ...
    *Jan 22 17:44:56.675: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
    *Jan 22 17:44:57.547: %SYS-5-RELOAD: Reload requested by  on console. Reload Reason: Reload Command.
    Write of event.log done
    IOS Bootloader - Starting system.
    flash is writable
    FLASH CHIP:  Numonyx Mirrorbit (0089)
    Xmodem file system is available.
    flashfs[0]: 212 files, 7 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 31997952
    flashfs[0]: Bytes used: 15058432
    flashfs[0]: Bytes available: 16939520
    flashfs[0]: flashfs fsck took 23 seconds.
    Reading cookie from SEEPROM
    Base Ethernet MAC address: 10:f3:11:c2:2e:3a
    Ethernet speed is 1000 Mb - FULL Duplex
    Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a"...##########################
    File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a" uncompressed and installed, entry point: 0x2003000
    executing...
    Secondary Bootloader - Starting system.
    Tide MB - 32MB of flash
    Xmodem file system is available.
    flashfs[0]: 212 files, 7 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 31997952
    flashfs[0]: Bytes used: 15058432
    flashfs[0]: Bytes available: 16939520
    flashfs[0]: flashfs fsck took 14 seconds.
    Base Ethernet MAC address: 10:f3:11:c2:2e:3a
    Boot CMD: 'boot  flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a;flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a'
    Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a"...#######################################
    File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a" uncompressed and installed, entry point: 0x1003000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Mon 23-Dec-13 08:11 by prod_rel_team
    Tide MB - 32MB of flash
    Initializing flashfs...
    flashfs[3]: 212 files, 7 directories
    flashfs[3]: 0 orphaned files, 0 orphaned directories
    flashfs[3]: Total bytes: 31739904
    flashfs[3]: Bytes used: 15058432
    flashfs[3]: Bytes available: 16681472
    flashfs[3]: flashfs fsck took 12 seconds.
    flashfs[3]: Initialization complete.
    flashfs[4]: 0 files, 1 directories
    flashfs[4]: 0 orphaned files, 0 orphaned directories
    flashfs[4]: Total bytes: 11999232
    flashfs[4]: Bytes used: 1024
    flashfs[4]: Bytes available: 11998208
    flashfs[4]: flashfs fsck took 0 seconds.
    flashfs[4]: Initialization complete.
    Copying radio files from flash: to ram:
    Copy in progress...CCCCC
    Copy in progress...CCC
    Copy in progress...CCCC
    Copy in progress...CCCC
    Copy in progress...CC
    Copy in progress...CCC
    Copy in progress...CC
    Copy in progress...CCCCC
    Uncompressing radio files...
    ...done Initializing flashfs.
    Radio0  present 8764 8000 0 A8000000 A8010000 0
    Rate table has 650 entries (20 legacy/224 11n/406 11ac)
    POWER TABLE FILENAME = ram:/B2.bin
    Radio1  present 8764 8000 0 88000000 88010000 4
    POWER TABLE FILENAME = ram:/B5.bin
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-SAP2602E-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory.
    Processor board ID FGL1711Z6K6
    PowerPC CPU at 800Mhz, revision number 0x2151
    Last reset from power-on
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 10:F3:11:C2:2E:3A
    Part Number                          : 73-14511-02
    PCA Assembly Number                  : 800-37898-01
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC17093TXF
    Top Assembly Part Number             : 800-38357-01
    Top Assembly Serial Number           : FGL1711Z6K6
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-SAP2602E-E-K9  
    Press RETURN to get started!
    *Mar  1 00:00:16.035: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
    *Mar  1 00:00:16.151: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (11)APAVC:  WlanPAKs 18174 RadioPaks  17566
    *Mar  1 00:00:23.131: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
    *Mar  1 00:00:29.443: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
    *Mar  1 00:00:29.503: initializing dot11 onplus
    *Mar  1 00:00:29.667: not a autoconfig enabled device!!!
    *Mar  1 00:00:31.671: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:32.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
    *Mar  1 00:01:18.015: Starting Ethernet promiscuous mode
    *Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Jan 22 17:44:57.007: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power source
    *Jan 22 17:44:57.015: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Mon 23-Dec-13 08:11 by prod_rel_team
    *Jan 22 17:44:57.015: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
    *Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to downERROR: Failed to configure ethernet promiscuous mode. Interface Descriptor mismatch
    *Jan 22 17:45:01.667: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (0-0)
    *Jan 22 17:45:01.667: DPAA Initialization Complete
    *Jan 22 17:45:01.667: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
    *Jan 22 17:45:02.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    *Jan 22 17:45:06.863: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.16.33.216, mask 255.255.254.0, hostname ap

  • Latest Update breaks brightness level in iMac

    Everytime I restart, the brightness level jacks up to 100% The effective brightness I have calibrated for is on 0% This started happening directly after the latest 10.5 update. Its annoying to reset it everytime I restart.
    I have a 17" 2006 imac. The first intel one.

    I would try both a PRAM and an SMC reset.
    PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.>
    SMC
    1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    2. Unplug all cables from the computer, including the power cord and any display cables.
    3. Wait at least 15 seconds.
    4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
    5. Press the power button on the back to start up your computer.
    Dah•veed

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • Windows 8.1 (running in VMware Fusion 6) keeps resetting my default program associations after rebooting

    I tried to set Google Chrome as my default browser in Windows 8.1 (virtual machine running in VMware Fusion 6) but somehow mysteriously failed over and over again.
    According to Control Panel\Programs\Default Programs\Set Default Programs\Set Program Associations, there are 19 possible associations for Google Chrome:
    Extensions: .htm, .html, .shtml, .webp, .xht, .xhtml;
    Protocols: FTP, HTTP, HTTPS, IRC, MAILTO, MMS, NEWS, NNTP, SMS, SMS, SMSTO, TEL, URN, WEBCAL
    I have no problem selecting some of them, or "set this program as default" so that "this program has all its defaults." (I am the only admin user, but not the builtin admin account.)
    However, after restarting the VM, the program associations for Google Chrome will reset on its own. Specifically,
    "this program has all its defaults" becomes "this program has 14 out of 19 defaults", losing the following five crucial protocols:
    FTP, HTTP, HTTPS, MAILTO, NEWS
    And these protocols simply hang there unassociated—they don't belong to IE either.
    So I am extremely confused; how could the system reset my default program associations? What's wrong?
    In case it is relevant, I will also post my VMware Fusion VM Default Applications settings here. All of the options are unchecked: "Open your Mac files and links using Windows applications"; "Open your Windows files and links using Mac applications";
    "Run Windows applications from your Mac's Applications folder."
    Thank you for your time.

    Hi,
    I have the same issue, and I've posted on the vmware forums with no responses other than another person having the same issue.
    Have you been able to fix this? I tried importing the same VM into Parallels and the problem goes away. If I do a manual uninstall of Fusion (and remove VMWare tools from the VM), and then reinstall both, the problem goes away - temporarily. I had a few
    good months, and it started again. Followed the procedure mentioned, and it went away again, but only survived a few reboots.
    FYI, it's definitely not an issue with Chrome, as I'm having the same issue with Firefox (although I can duplicate on chrome as well).
    Have you figured anything out?
    Thanks!

  • How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

    How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
    I have seen this question asked previously and it seems there is no answer.
    I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
    ... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

    Press CTRL + 0
    Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
    You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
    After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.
    You can find more information about the zoom features Firefox offers in these articles:
    [[Text zoom]] - For zooming text only
    [[Page zoom]] - For zooming the whole page (including images etc.)

  • New iMac brightness level keeps changing (auto adjust NOT checked)

    Just got a new 27 inch iMac and keep on having to change the brightness level back to the brightness I prefer.
    I do not have auto adjust checked, I put the brightness slider up to the level I like and after a while the brightness dims to what seems like the default level as its always down to the same spot on the slider...what gives? i just want it to stay where I want it...
    Help.

    I have same problem, of autobrightness being unchecked and my brightness going from full to about 3/4 bright
    all by itself. I had that problem, then flickering of my screen also was taking place. I didn't bring my unit into Apple
    because this autobrightness thing plus flickering would not happen on command,, and I wouldn't be able to show them properly. Well , finally my left side of the screen dimmed,, and that was the go ahead to bring it in to them
    to show the left side of screen. I also told them about the flickering,, and the autobrightness, which I figured played a role into the final left side dimming. They replaced the backlight and the display LCD on warranty.
    I have had it for about 5 days. The screen is equally lit (as should be), however, I discovered that my same old
    problem of autobrightness, is slipping back to 3/4.  So most of you have autobrightness problem in a sort of different way. I set mine to "torch" because my downstairs bedroom is dim (with one overhead light), but sometimes, just plain dark,, so I want to sometimes keep it at torch,, however, it still slips back. You would
    almost think that if my surronding was dim or dark, that it would stay on torch if the autobrightness was really working properly. Go figure. I just tried SMC a short while ago,, I had tried, before my repair doing PRAM and the other one (I think VRAM).  I also will unhook my second monitor to see if that is having an impact on things.
    Do any of you in this post have a second monitor attached,, and have you tried unhooking it to see if the problem
    is resolved?

  • Brightness levels decreased after installing 10.6.2

    My computer came with Snow Leopard (it's the 13" Macbook Pro) and after installing the upgrade from 10.6.1 to 10.6.2 I noticed that the brightness decreased dramatically. I don't think it has anything to do with gamma as I tried to adjust that and it didn't really make that big a difference. I have now increased the brightness but I still think there might be something wrong with my laptop because I don't know if the update could decrease the brightness levels as they were the default levels, I hadn't changed them... It would seem strange somehow... I did install the update when I didn't have the computer connected to a power source, could that have caused this? Could installing the update again help? Or could I uninstall it somehow? This is my first Mac so I'm rather clueless about everything...

    blaeblae wrote:
    My computer came with Snow Leopard (it's the 13" Macbook Pro) and after installing the upgrade from 10.6.1 to 10.6.2 I noticed that the brightness decreased dramatically. I don't think it has anything to do with gamma as I tried to adjust that and it didn't really make that big a difference. I have now increased the brightness but I still think there might be something wrong with my laptop because I don't know if the update could decrease the brightness levels as they were the default levels, I hadn't changed them... It would seem strange somehow... I did install the update when I didn't have the computer connected to a power source, could that have caused this?
    yes, that was most likely it. and a bad idea it was on your part. never do that again. if the computer runs out of power in the middle of an update this can brick your system and require a reinstall.
    Could installing the update again help? Or could I uninstall it somehow? This is my first Mac so I'm rather clueless about everything...
    you don't need to do anything. the brightness was reduced automatically during the update to conserve energy.

  • Reset to Defaults on customize screen - timing out?

    "Portlet 1 responded with content-type text/plain when the client was requesting content-type text/html"
    I get the above error when the "Reset to Defaults" button is used on the customize screen on which there is a very large LOV. My LOV contains 10,941 entries and populates fine upon entry, but the "Reset to Defaults" option seems to have it's own (shorter) timeout duration. Any idea how to change it?
    Thanks.

    Hello krish_go,
    Thanks for using Apple Support Communities.
    Since you have already tried restarting and resetting the device to get the control center option enabled, the next step would be to first back up the iPhone and then restore to its factory settings.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Take care,
    Alex H.

  • Screen goes back to lowest brightness level after wakeup

    Hello All,
    My late 2002 Titanium Powerbook screen sometimes goes to the lowest brightness level after wakeup when the lid has been closed. I manually have to reset the level again. Does anyone know why the level is not staying to my original setting? Do you think there's a corruption in the wakeup mode function? Just a hunch, though. Any input is much appreciated. Have a great day.
    Jack
    iMac G5 20, 2 GHz, 1.5 GB RAM   Mac OS X (10.4.8)   Powerbook 15" Titanium (late 2002) 1 gHz, 1 gig RAM, 60 gig HD, OS X 10.4.8

    Hi TJK,
    I just did a permission repair with disk utility to eliminate any other issues. I'll create a new user and give your suggestion a try. It makes sense since I recently got this machine used from another owner. I've nothing to lose, I suppose.
    While I'm here, would a clean install eliminate the issue I'm having? I'm not too excited about having his name on my Home folder permanently, anyway. I've no problem doing a clean install, and I've got the original install disks.
    Best regards,
    Jack
    iMac G5 20, 2 GHz, 1.5 GB RAM   Mac OS X (10.4.8)   Powerbook 15" Titanium (late 2002) 1 gHz, 1 gig RAM, 60 gig HD, OS X 10.4.8

  • I don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help?

    i don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help? I have even uninstalled and reloaded firefox
    == This happened ==
    Every time Firefox opened
    == My wife hit a button and doesn' know what happened

    See if this helps. View > Toolbars, if no check beside Navigation Bar, click on Navigation Bar to check it.
    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
    <u>''Windows'' Method 2.</u> Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
    <u>''Windows'' Method 3.</u> Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
    See:
    http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''
    '''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. 1.6.0.18; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.
    <u>'''NOTE:'''</u> Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. <u>'''''At this time'''''</u>, the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; <u>'''''at this time'''''</u>, it must be manually downloaded and installed. According to the Java release notes:
    ''"'''Bug Fixes'''''
    ''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
    <u>'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)'''</u>: your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    -exit Firefox (File > Exit)
    -''<u>In Windows,</u>'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -''<u>In Windows,</u>'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
    -when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
    <u>'''You '''</u>~~red:<u>'''MAY'''</u>~~<u>''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    ''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, <u>'''but'''</u> do look at the two bulleted items at the bottom "'''<u>NOTE for IE:</u>'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
    ''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    ~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
    -exit Firefox (File > Exit)
    -In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • Ergonomic Brightness Level for Late 2009 iMac 27" i7

    Hi. Apple seems to default the brightness level to full when you buy it and I've read some iMacs flicker unless it's brightness level is set to full bright. For the late iMac 2009 27" i7, what's do experts say about ergonomic brightness level for this Mac, for LED LCDs? I won't be doing professional printing by the way. Thank you in advance.
    Gbu

    I set mine to something between 50-70% of the max depending on the time of day and the amount of sunshine.
    No buzzing at all.
    Stefan

Maybe you are looking for

  • Error in linking C++ STL code  using CC 5.0 on Solaris 2.6

    Hi All, When building a shared dynamic library from C/C++ code using STL features, I get an a link error, referring to the STL objects in use. I use CC WorkShop C++ Compiler 5.0 running on Solaris 2.6. For example: using a vector<int> we get : Undefi

  • Can't open some links please reply

    Hello When I enter a website on safari or firefox, I click some links and they open normally, but when it come to others, the cursor appears with a blue circle under it ad the link doesnt open In firefox the circle's black. Please help. It wasnt that

  • How to easily edit contacts for N95 8G?

    Hi all! I would like to edit my contacts in the computer to pass them latter to N95 8G. For me, it's slow to edit them in the cell phone. Could I edit them in the computer? How could I do that? Thank you all in advance.

  • Object returned by GetSequenc​eFileViewM​gr?

    According to TestStand Reference manual, Chapter9, a multiple window application can invoke GetSequenceFileViewMgr to determine whether a Sequence File View Manager control is displaying the sequence file. However, the returned value of GetSequenceFi

  • HHActiveX.dll  - Windows Explorer open folders in separate window (Win7/ Vista)

    Windows Explorer will open folders in a separate window when you double click them. Adobe RoboHelp HTML 8 with update 1 and 2 installed sequentially on Windows XP. HHActiveX.dll  8.0.0.203 registered by installer Problem: What we're seeing is, after