Brightness meter has no effect in Windows 8

I upgraded to Windows 8, and now I can't change the screen brightness. The F1/F2 keys do alter the brightness meter in the Boot Camp Control Panel, but this level has no effect on the actual brightness of the screen.

Windows 8 is not supported by Bootcamp. There are no Windows 8 Bootcamp drivers.

Similar Messages

Great Video Editor That opens m4v files and has WMM effects. not imovie

So like the title says, i need a good video editor that opens up m4v files and has similar effects to windows movie maker. I accidentely removed iMovie from my computer and now i have nothing. Please don't suggest some really expense/advanced editors. Thanks!

Why don't you just use your install disk(s) and reinstall iMovie?

Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

check your computer or, if you don't know how to search for files, redownlload:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How can i display a dialog view centerly?set_window_position has no effect

hi ,all
i try to open a dialog which is a normal view,
here is the code i use,
CALL METHOD cl_wdr_runtime_services=>display_view_in_popup
        EXPORTING
          component             = component
          target_view_name      = 'V_BP_MAIN'
          target_window_name = 'W_BP_MAIN'
     MODAL                 = ABAP_TRUE
           window_title          = ''
           close_button          = abap_true
        IMPORTING
           popup_window          = popup_window
the first time the window i opened displayed is centered ,but if i open it twice or more
the window is in the left corner of screen,i tried to use popup_window->set_window_position( position = if_wd_window=>CO_CENTER ).but it has no effect at all
can anyone help me out?
thanks in advance.

thanks for your answer.
I did set the height and width of rootuielementcontainer of the dialog view .i,e,width:1200,height 700,
It display pretty well the first time,but when i open it the second time,the dialog view is not centered,so i can't see the whole dialog view,i have to drag it,

Remote content bar does not appear for some emails with images specifically daily Twitter updates. Changing options to allow all remote content has no effect

The broken image symbol appears in place of the images but associated web links do work ok.
Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
Any help appreciated.

You only need to post a URL to your web site. We can see your code in Browser.
So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Change of Min Pool Size has no effect?

Hi, we are still using odp 9.2.0.4 on windows server 2003 webserver and oracle database 9i on Sun solaris. Recently we discovered a problem using Min Pool Size = 1, it seems that if new connections are required we sometimes get a connection timeout. So we decided to set Min Pool Size = 30, and on the testserver this works fine. In the odp tracefile (tracelevel=2) you see the 30 connections building up immediately. But on the production server we see no difference, it looks like the (new installed, application pool reset) application still uses the Min Pool Size = 1 setting.
The connection string is build up in application code. On the testserver it was sufficient to stop and start the website and its application pool, on the production server this has no effect.
Does anyone have an idea what the problem is??? We also tried restarting the IIS server, that did not help either. In production there are more applications using ODP.
Regards, Paul.

What problem are you trying to solve at this point? Simply "why is odp not tracing?" The only suggestions I really have there are
1) make sure you restart the app after enabling tracing parameters
2) make sure the directory you've set tracing to is open as far as permissions
3) make sure you've set tracing in the right registry setting if you have multiple versions of ODP installed
4) if you're trying to write to c:\ root, try creating and pointing to a different (c:\odptrace for example) directory instead.
Hope it helps,
Greg

Media Keys Recognized Correctly Using Xev but pressing has no effect.

On g15 keyboard Xev maps the multimedia keys correctly
(KeyPress event, serial 35, synthetic NO, window 0x5600001,
root 0x10c, subw 0x0, time 5432517, (160,-5), root:(1123,826),
state 0x0, keycode 172 (keysym 0x1008ff14, XF86AudioPlay), same_screen YES,
XKeysymToKeycode returns keycode: 162
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
but Clementine doesn't react when the key is pressed.
I don't know what changes but rebooting can fixes / creates the problem randomly.

*vitali* wrote:I have kde 4.5.0 , and I am not messing with xev merely checking that the keys are detected correctly.
I have g15daemon , g15composer, g15macro, g15stats, libg15, lib15render installed.
The media keys are detected when setting them in the global shortcut for clementine, but pressing them has no effects (works on some reboots as i mentioned).
Hmmm....G15 media keys works out-of-the-box for Amarok. I can experiment on my box once I'm through with work in a few hours.
Looking at the Clementine bugtracker-there's an open bug regarding multimedia keys on Win7 and Clementine already. I'll play later-but I'm thinking this is something to post on their bug tracker.

Submenu attribute has no effect

In my JNLP file I use the following:
<information>
    .... other stuff...
         <shortcut online="true">
             <menu submenu="MyCompany"/>
         </shortcut>
</information>The submenu attribute has no effect on where the shortcut is created. A new submenu is never created, and the shortcut is created under start menu/Programs.
I am using 1.4.2_06 on Windows XP SP2.
Am I missing something from my JNLP file? I don't see any bugs for this behavior.
Kevin

oh, I thought 1.4.2_06 had an updated java web start which was identical to 1.5. Thanks for the info
Kevin

[svn:fx-trunk] 10898: Fix for a bug: After playing a hide effect, a window wouldn't be visible again.

Revision: 10898
Author:   [email protected]
Date:     2009-10-06 13:54:04 -0700 (Tue, 06 Oct 2009)
Log Message:
Fix for a bug: After playing a hide effect, a window wouldn't be visible again.
The issue here is that all effects that occur because of HIDE end up calling setVisible() (see EffectManager.effectEndHandler). Window/WindowedApplication was basically left with two concepts of setVisible...the displayObject one and the native application one, and they were out of synch. So setting visible=true on the window wasn?\226?\128?\153t calling setVisible(true) which controls the display object visibility. Now instead of doing our work in the visible setter, we override setVisible() and do it in there.
QE notes: -
Doc notes: -
Bugs: SDK-23263
Reviewer: Darrell
Tests run: checkintests, Rob ran mustella window/windowedapplication
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23263
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/Window.as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as

I run Suse 9.1 Linux, and Suse has a package called lmsensors which by default on my machine gives readings like this:
Code: [Select]
temp1: +27°C (high = +0°C, hyst = +22°C) sensor = thermistor
temp2: +41.0°C (high = +80°C, hyst = +75°C) sensor = PII/Celeron diode
Now that 41C is pretty high for an idle AMD643000+ running at 1000Mhz, 1.08V. Too high, I would say. temp 1 in this case is the SYS temp, temp2 is the CPU temp.
Now, using lmsensors I can duplicate your little trick and tell it that temp 2 is in fact a 3904 transistor. Having done this can I get readings like this:
Code: [Select]
temp1: +27°C (high = +0°C, hyst = +22°C) sensor = thermistor
temp2: +16.0°C (high = +80°C, hyst = +75°C) sensor = 3904 transistor
Problem is, I'm not sure that the sensor is actually a 3904 transistor! The number's lower, but I was pretty sure that the sensor in the AMD64 is in fact a diode. Also, surely the CPU temp can't actually be that much lower than the SYS temp.
So, I think your fix succeeds in giving lower temps and that's great in that it will tell your system software that the CPU is not overheating, but I don't think it's the solution to high temp reporting. Anyway, as you say, its a solution for people who can't run with system shutdowns due to bogus high temps.
I've been looking at these temp issues with the MSI K8T, and I was thinking the problem was simply a miscalibration. The Winbond sensor chip on my board (maybe the K8N is the same, maybe not) has a sensor temp offset that gets added to the temp coming from the sensor. On the K8T this number is +54C. Funny number I know, but I've "fixed" the problem while I wait for a real bios fix on the K8T by simply reducing this offset to give me a CPU temp that matches SYS temp when idle. This enables cool'n'quiet fan control to work properly on my system, which is my main practical concern.

Snmp configuration on weblogic 10 has no effect

SNMP in MMC(Mobile Management Center, A HP Product), use joesnmp.jar internal to send snmp trap generated by mmc app. This part works well in weblogic 10;
snmp in weblogic , configured by weblogic console. In weblogic 8, we configure such items:
Weblogic Subsystem
Purpose
Level
Deployer
Monitor all war/ear deploy/undeploy/redeploy
INFO
JDBC
Monitor all warnings/errors in jdbc operation
WARN
Current tests shows that the snmp configuration on weblogic 10 has no effect.
Due to MMC4.6 gets the Weblogic updated from 8.16 to 10.3, we didn’t find the configuration about “Enable JDBC Logging”. Below is the former config page about Weblogic 8.16.
But in Weblogic 10.3 we cannot find this configuration. We have followed the guide http://e-docs.bea.com/wls/docs100/jdbc_admin/monitor.html#wp1048793
And tried to set the appropriate properties on the command line like this,
-Dweblogic.debug.DebugJDBCSQL=true -Dweblogic.log.StdoutSeverity="Info"
Actually we can get the DM, Core, SMTP, Bulk, Adaptor Class, and connection fail error messages in weblogic backend log, but seems Weblogic cannot send SNMP trap messages to SNMP monitoring tool like Openview.
PS. Weblogic can send out the SNMP trap messages when the server starts and stops.
So till now the SNMP cannot monitor the DM, Core, SMTP, Bulk, Adaptor Class, and connection fail for MMC4.6.

Hi, I am on 12.1 weblogic, and I am stuck on where you set the SNMP Servername and port number.
We are on windows 2008, I see there is a services, SNMP .
Is there something I need to do on the weblogic side before i get into the SNMP agenets and traps, this part I understand, I am just unsure where to add the SNMP Servername and the user I wish the emails to go to.
I see in the security realms the user i can add to the group monitors.
-->, I am running WL 10.3 and SNMP works fine. The cluster generates traps based on particular mbeans, such as when a server's health state is not "OK", or when there are JDBC connection issues. You have to create a new SNMP agent within the admin server then build the individual traps ( String, Gauge, Counter, etc. ) and make sure you have a Trap Destination.

Adjustment Brush in Camera RAW has no effect

I'm using Photoshop CS4 on my MacPro and the adjustment brush in ACR has no effect. I deleted the preferences file with no result. I have a copy of PS CS5 beta and the adjustment brush works quite well. I'm not using the beta on production jobs until it's released. Suggestions, please. Thank you.
JimK

I recall this issue from another user a while back. It happens when Window's font size if higher than 100% Here is the link: https://forums.adobe.com/thread/1663542?q=adjustment%20brush
Benjamin

"When I open a link in a new tab, switch to it immediately" option has no effect on command+clicking on links.

Whether this option is ticked or un-ticked, command+clicking a link will open the link in a new tab and immediately switch to it.
Is it possible to change this behavior so that command+clicking on a link will open the link in a new tab in the background?

Did you try to close and restart Firefox after toggling this setting?
Does holding down the Shift key in addition (i.e. Command + Shift and a left-click) has any effect?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Have keyframes in effect controls window coincide with main time line

Hello,
Is there any way I can have the time line in my effects control window coincide with my main time line ?
Example, I add keyframes along my main time line, but any time I wish to edit them, I need to scrub my effect controls window timeline to get to that
spot that coincides on the main time line. I'm just wondering how I can have both time lines show the same area at the same time.
So if I'm at the end of my time line, and add a keyframe, and then wish to just scrub or move my cursor to the beginning of my main time line, the
time line in the upper window ( effects control window ) does not reflect the area of the main time line I am currently at, I need to actually click the time time
line ( main time line ) in order to "refresh" the upper effect control window time line.
Thanks for any advice,
Dave.

Hi Jim,
that's what I mean, thanks for info. I guess this isn't a popular want from users, I just thought it would be neat if we could do this, it's not a big deal, but I thought
I would ask. Thanks for the informatiion - at least I know now.
Dave
JSS1138 wrote:
I think he wants the CTI of the Effects pane to match the CTI of the sequence. If one moves, the other moves as well.
In CS4 this happens by default. Has that changed for CS5?

Changing bounds origin of UIView has no effect

I try to pan/scroll a big image(500x500) in a small frame (200,200) like in Google Maps. Changing bounds origin of UIImageView has no effect. The same part of image is displayed by the view.
IBOutlet UIImageView *image;
-(void)touchesEnded:(NSSet*)touches withEvent:(UIEvent*)event
CGRect bounds=[image bounds];
bounds.origin.x=bounds.origin.x+10;
bounds.origin.y=bounds.origin.y+10;
[image setBounds:bounds];
Does anyone have any idea what is wrong?

Ok, I found out what's wrong.
To "pan" an image you have to change bounds origin of PARENT view.
- (void)applicationDidFinishLaunching:(UIApplication *)application {
CGRect viewRect = CGRectMake(50, 50, 100, 100);
UIView* myView = [self createView:viewRect withColor:[UIColor redColor]];
UIView* childView = [self createView:CGRectMake(0, 0, 50, 50) withColor:[UIColor blueColor]];
[myView addSubview:childView];
[window addSubview:myView];
myView.clipsToBounds=TRUE;
myView.bounds=CGRectMake(45, 45, 100, 100);
[myView release];
[childView release];
[window makeKeyAndVisible];
-(UIView*) createView:(CGRect)viewRect withColor:(UIColor*)color
UIView* myView = [[UIView alloc] initWithFrame:viewRect];
myView.backgroundColor=color;
return myView;
}

Wrong Channels Being Mapped for 5.1 - Changing Has No Effect.

I just setup a new edit suite using a Blackmagic Decklink Extreme 3D Card, running on a PC with Windows 7.
Initially my 5.1 channel mapping required altering in Premier to get the correct output to the correct speakers but once sorted all worked great.... until today! For some reason no matter what I do some of the channels are now mixed up, and changing the mapping preferences has no effect. I am getting the Centre channel coming from the Rear Right and Rear Left is coming out of the Sub! I have my preferences set to output from the BlackMagic Audio Device, but even swapping left and right channels has no effect.
If I flick over to Audition and map the channels for a 5.1 mix it works fine and has the correct output which I guess rules out a problem with the DeckLink. This is REALLY frustrating me, any suggestions or advice on what could be the issue with premier would be greatly appreciated!

Moderator advice: Please read the announcement(s) at the top of the forum listings and the FAQ linked from every page. They are there for a purpose.
Then edit your post and format the code and CSS correctly.
db

Brightness meter has no effect in Windows 8

Similar Messages

Maybe you are looking for