Brightness not working even after restore

Hey, using an Ipod classic. I had it charging on an Ihome, and hadn't used it in a couple of days. Then when I go to use it today, the brightness is no longer working right. From about 50% brightness to 100% brightness, it looks exactly the same without getting any brighter. When I have it on around 50% and above, it seems to flicker somewhat, but remains dim. I tried doing the 5 R's, but no luck. It still remains being dim without getting any better. Is there anything I can do, or would I have to send it in to Apple to fix this problem. And would my warranty still cover this? (Have had Ipod Classic nearly a year)

QuickTimeKirk,
"I opened it using QuickTime...""...I don't see any "animation."
Strange indeed since if my very first link in my first post is clicked on (while using Firefox 3.6.6 or Camino 2.0.3) the simple animation displays.
I did open the .mov file in QT and I agree it does not animate for me either in this fashion.
I had not viewed this page, or .mov file, in some time and when I last looked (many versions back on both QT and Safari) there was no problem.
Again... very strange that it would animate in Firefox and Camino since when directly opened in QT it does not.
"The html code uses the "embed" tag but yours is missing the closing tag."
According to Apple there is no closing tag for this... and my syntax checker does not indicate a missing closing tag. Would you refer me to a URL that defines this?
Thanks.

Similar Messages

HT201274 Facetime is still not working even after restore and all other troubleshooting is performed

Tried restoring and all other troubleshooting and still cannot obtain Facetime on my phone - have others had this problem and if so how di you resolve the problem? Please help.

Which version of Lightroom? Which operating system?

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

Webcam is not working even after I reinstall the system software

My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
Tian

Update, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.

All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

Window 10 upgrade. Graphics driver not working even after re-install

Notebook pavilion DV6 3280. Just upgraded to Windows 10 and AMD graphics driver not working even after re-install. What do I do? Is there another driver not on the HP Website that I should try?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Touchpad does not work even after format - x220t

Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
steve

xyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

MacBook Keys not working even after KeyBoard Firmware update

My friend's sister bought me a MacBook from the US last October. Fortunately, Apple announced the release of Leopard also on the same month and I got a free upgrade to leopard. I installed leopard about 3 months back. My keyboard was working fine when I had Tiger installed. After I installed Leopard, I remember installing a Keyboard firmware update once through the Software Update.
About two three weeks back, my MacBook started acting wierd. Some keys were not working (mostly 't', 'q', left shift, left command, zero which is not working even now. I couldn't close the last bracket because the key is not working. I am a php programmer and I can't think of living without the closing bracket and zero keys . But most of the keys works on and off.
After seeing on several sites that it is a problem with firmware, I once again downloaded the firware update, but couldn't install it since the installation wizard says that my system doesn't need it.
Can someone plz tell me what to do now? Will reinstalling help?
Thanks in advance.

The problem persists everytime I restart my system or wake it up from sleep. But each time different keys have problem. I am now downloading update 10.5.4. Can someone plz help me?

Accidentally deleted x protect meta.plist and plug in not working even after downloading latest

Hi all
Need some help here. It started off like this - after upgrading to mavericks, i had a problem viewing some java stuff. Googled and read somewhere to delete the x protect meta.plist and thus, did so. After doing that, my youtube videos etc all couldnt work. So googled again and did whatever the rest suggested - download latest version of Java, uninstall java and reinstall again, install other versions of java etc etc. all didnt worked.
Someone just pointed out that I had deleted a very critical security file (x protect meta.plist) and might have more problems that I thought on my hand.
Im not very technical or IT saavy, so please kindly advise. Most of the problems surfaced after deleting that file. And right now, plug in for videos are still not working even though I have attempted various 'solutions' suggested in this forum (the not too technical ones) and java is still cranky. Pls advise. thanks!

Anyone able to help?
1) How did u solve the missing/out of date plugin?
- Have tried installing numberous times the latest version - doesnt work
- Tried uninstalling and then reinstalled earlier versions of java - doesnt work too
read somewhere to delete the xprotect meta plist - realised much later that piece of advice was for snow leopard OS and thus, did not work too. A forummer told me today this file is a critical security file and i should not have deleted it. WHat can I do now?
current situation:
still cant play youtube videos and other videos.
java on some sites still cant work

Lion internet sharing/ audio output not working even after reading through/ following other threads

Hi, since updatig to Lion my iMac internet sharing is not working i have renamed to a shorter name as advised in other threads but this still does't work I wish to share my ethernet connection wirelessly but after turning it on i can never get the arrow symbol on the top bar. Also i can only play audio through the built in speakers but no headphones/external speakers even after playing with the audio midi settings as seen in other posts but no such luck.

First, see if you can change the "Play audio using:" selection in Edit > Preferences > Playback - if you select Direct Audio rather than Windows Audio Session this may address the issue. Note, however, that the Direct Audio option seems to be unavailable in some cases for Windows 8.1.
Otherwise, there is an alternative downloader for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the playback issues that some users have been reporting with the full 64-bit version (the alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer). The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
After installing this alternative version it may still be necessary to adjust the "Play audio using:" selection in Edit > Preferences > Playback to restore glitch-free audio.

HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

I would be worried about that - but it may turn out to be nothing.
Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

Java option icon not displaying AND Java not working, even after deleting and re-installing Java

Hi, I have uninstalled and re-installed Java. When I look at Add-ons, it shows Java Platform SE7 U17 10.17.2.2 and Java deployment Toolkit 7.0.17… 10.17.2.2 enabled. But it is not working – and I do not see the Firefox plugin to allow occasional use of Java.
One useful thread which discusses several difficulties in detail is
https://support.mozilla.org/en-US/questions/944956?esab=a&as=aaq
I tried to follow scrumpyjoe’s advice in this thread:
“This fixed it for me (32 bit windows) after installing Version 7 Update 10, but not seeing the plugin:
1) start regedit
2) navigate to HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins
3) right click, add New Key, name: @java.com/JavaPlugin,version=10.xx.xx
4) click on it, then right click and add new string value, name: path
5) right click, Modify, change value data to: C:\Program Files\Java\jre7\bin\plugin2\npjp2.dll [check if this is the right dll for your setup]
6) exit regedit
7) start FF”
- but (unless I have made a mistake) it has not resolved my problem.
What can I try next, please ?
Background:
Asus NX90jq
Intel core I7
700GB free disk space
16384Mbytes memory
O/S: Windows 7 Ultimate, 64-bit
UPDATE 2apr13
I have now unistalled and re-installed Firefox 20.0. restored preferences etc. using MozBackup, and Java Platform and Java Toolkit10.17.2.2. both show as working Add-ons - BUT STILL NO JAVA AND STILL NO RED ICON IN TOOLBAR. What is going on, please ?

I don't understand any of these replies. How do I get Java to run for Pogo.com? I had no problems a week ago. I do not have the red icon. I am not a programer so keep it simple. I am a 59 year old speech therapist.
[email protected] HELLLLLLP

Brightness not working even after restore

Similar Messages

Maybe you are looking for