Brightness not working on HP ENVY TouchSmart 15-j178ca

Hi,
Brightness was working fine on my HP ENVY TouchSmart 15-j178ca with Windows 8.1 64 bits (F2 key, F3 key and Windows brightness slider).  NVIDIA GeForce Experience showed there was an update available.  After doing the update I have lost all brightness control.  Tried reverting to old drivers, tried hp latest drivers and even tried Intel and NVIDIA latest drivers without any success.  Here's the details :
Intel(R) HD Graphics 4600 10.18.10.3304 (from hp sp63553 package)
Intel(R) HD Graphics 4600 10.18.10.3304 (from hp sp65232 package)
Intel(R) HD Graphics 4600 10.18.10.3907 (from Intel)
NVIDIA GeForce GT 740M 9.18.13.3233 (from HP sp65231 package)
NVIDIA GeForce GT 740M 9.18.13.4411 (from NVIDIA)
I have always uninstalled drivers before reinstalling new ones and my BIOS is up to date...  Any ideas?
Thanks,
fcorbeil

Hi
Please find the link given below might help you in case you have already tried these steps let me know.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • Auto brightness not working in ios6

    I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

    Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
    I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
    I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
    Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

  • Auto brightness not working on iPhone 5?

    On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
    Anyone else have this problem of the auto brightness not working?

    There is nothing wrong with the auto brightness.
    When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
    If you have the slider too high the brightness cant reduce because youre not letting it.
    Set your brightness at about 25% and you'll see what I mean.

  • NVIDIA driver not working on HP envy dv7

    Hi,
    i trying to install nvidia official driver to my HP envy dv7 laptop.
    Two wasted nights without success.
    I trying newest version from nvidia.com and from pacman.
    Result is same in both cases - black screen, high cpu temperatures, no video output.
    Pasted logs are from pacman version.
    Thank you for help !
    uname -a :
    $ uname -a
    Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    lspci | grep VGA
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
    modinfo nvidia
    $modinfo nvidia
    filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
    alias: char-major-195-*
    version: 331.38
    supported: external
    license: NVIDIA
    alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias: pci:v000010DEd*sv*sd*bc03sc02i00*
    alias: pci:v000010DEd*sv*sd*bc03sc00i00*
    depends: drm,i2c-core
    vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
    parm: NVreg_Mobile:int
    parm: NVreg_ResmanDebugLevel:int
    parm: NVreg_RmLogonRC:int
    parm: NVreg_ModifyDeviceFiles:int
    parm: NVreg_DeviceFileUID:int
    parm: NVreg_DeviceFileGID:int
    parm: NVreg_DeviceFileMode:int
    parm: NVreg_RemapLimit:int
    parm: NVreg_UpdateMemoryTypes:int
    parm: NVreg_InitializeSystemMemoryAllocations:int
    parm: NVreg_RMEdgeIntrCheck:int
    parm: NVreg_UsePageAttributeTable:int
    parm: NVreg_MapRegistersEarly:int
    parm: NVreg_RegisterForACPIEvents:int
    parm: NVreg_CheckPCIConfigSpace:int
    parm: NVreg_EnablePCIeGen3:int
    parm: NVreg_EnableMSI:int
    parm: NVreg_MemoryPoolSize:int
    parm: NVreg_RegistryDwords:charp
    parm: NVreg_RmMsg:charp
    parm: NVreg_AssignGpus:charp
    pacman -Qi nvidia
    $pacman -Qi nvidia
    Name : nvidia
    Version : 331.38-3
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
    Optional Deps : None
    Required By : None
    Optional For : bumblebee
    Conflicts With : nvidia-96xx nvidia-173xx
    Replaces : None
    Installed Size : 4642.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
    Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    nvidia-xconfig --query-gpu-info
    $nvidia-xconfig --query-gpu-info
    Number of GPUs: 1
    GPU #0:
    Name : GeForce GT 630M
    UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
    PCI BusID : PCI:1:0:0
    Number of Display Devices: 1
    Display Device 0 (CRT-0):
    No EDID information available.
    xorg.0.log
    [ 2028.379]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2028.394] X Protocol Version 11, Revision 0
    [ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
    [ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 2028.423] Build Date: 09 January 2014 08:47:24AM
    [ 2028.431]
    [ 2028.439] Current version of pixman: 0.32.4
    [ 2028.456] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
    [ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2028.548] (==) ServerLayout "Layout0"
    [ 2028.561] (**) |-->Screen "Screen0" (0)
    [ 2028.574] (**) | |-->Monitor "Monitor0"
    [ 2028.587] (**) | |-->Device "Device0"
    [ 2028.601] (**) |-->Input Device "Keyboard0"
    [ 2028.615] (**) |-->Input Device "Mouse0"
    [ 2028.629] (==) Automatically adding devices
    [ 2028.643] (==) Automatically enabling devices
    [ 2028.658] (==) Automatically adding GPU devices
    [ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2028.688] Entry deleted from font path.
    [ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2028.721] Entry deleted from font path.
    [ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2028.774] Entry deleted from font path.
    [ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2028.869] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2028.931] (WW) Disabling Keyboard0
    [ 2028.952] (WW) Disabling Mouse0
    [ 2028.974] (II) Loader magic: 0x804c80
    [ 2028.995] (II) Module ABI versions:
    [ 2029.017] X.Org ANSI C Emulation: 0.4
    [ 2029.039] X.Org Video Driver: 15.0
    [ 2029.062] X.Org XInput driver : 20.0
    [ 2029.084] X.Org Server Extension : 8.0
    [ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
    [ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 2029.213] Initializing built-in extension Generic Event Extension
    [ 2029.240] Initializing built-in extension SHAPE
    [ 2029.267] Initializing built-in extension MIT-SHM
    [ 2029.295] Initializing built-in extension XInputExtension
    [ 2029.322] Initializing built-in extension XTEST
    [ 2029.349] Initializing built-in extension BIG-REQUESTS
    [ 2029.377] Initializing built-in extension SYNC
    [ 2029.404] Initializing built-in extension XKEYBOARD
    [ 2029.432] Initializing built-in extension XC-MISC
    [ 2029.459] Initializing built-in extension SECURITY
    [ 2029.486] Initializing built-in extension XINERAMA
    [ 2029.512] Initializing built-in extension XFIXES
    [ 2029.538] Initializing built-in extension RENDER
    [ 2029.564] Initializing built-in extension RANDR
    [ 2029.589] Initializing built-in extension COMPOSITE
    [ 2029.615] Initializing built-in extension DAMAGE
    [ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2029.665] Initializing built-in extension DOUBLE-BUFFER
    [ 2029.688] Initializing built-in extension RECORD
    [ 2029.711] Initializing built-in extension DPMS
    [ 2029.734] Initializing built-in extension Present
    [ 2029.756] Initializing built-in extension DRI3
    [ 2029.778] Initializing built-in extension X-Resource
    [ 2029.800] Initializing built-in extension XVideo
    [ 2029.821] Initializing built-in extension XVideo-MotionCompensation
    [ 2029.842] Initializing built-in extension XFree86-VidModeExtension
    [ 2029.863] Initializing built-in extension XFree86-DGA
    [ 2029.883] Initializing built-in extension XFree86-DRI
    [ 2029.903] Initializing built-in extension DRI2
    [ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2029.923] (II) LoadModule: "glx"
    [ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2029.993] compiled for 4.0.2, module version = 1.0.0
    [ 2030.034] Module class: X.Org Server Extension
    [ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 2030.076] Loading extension GLX
    [ 2030.077] (II) LoadModule: "nvidia"
    [ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2030.142] compiled for 4.0.2, module version = 1.0.0
    [ 2030.185] Module class: X.Org Video Driver
    [ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
    [ 2030.273] (II) X log verbosity: 5
    [ 2030.315] (--) using VT number 1
    [ 2030.462] (II) Loading sub module "fb"
    [ 2030.462] (II) LoadModule: "fb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2030.462] (II) Module fb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 2030.462] (II) Loading sub module "wfb"
    [ 2030.462] (II) LoadModule: "wfb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (II) Loading sub module "ramdac"
    [ 2030.462] (II) LoadModule: "ramdac"
    [ 2030.462] (II) Module "ramdac" already built-in
    [ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2030.462] (==) NVIDIA(0): RGB weight 888
    [ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
    [ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2030.463] (==) NVIDIA(0): Using HW cursor
    [ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
    [ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
    [ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
    [ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
    [ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
    [ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
    [ 2030.589] (II) NVIDIA(0): Chip SKU: 770
    [ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
    [ 2030.589] (II) NVIDIA(0): Project: 1303
    [ 2030.589] (II) NVIDIA(0): Project SKU: 0000
    [ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
    [ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
    [ 2030.589] (--) NVIDIA(0): Found 2 heads on board
    [ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
    [ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
    [ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2030.589] (II) NVIDIA(0): SPS : 1
    [ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
    [ 2030.589] (II) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 2030.591] (--) NVIDIA(0): CRT
    [ 2030.591] (--) NVIDIA(0): CRT-0
    [ 2030.591] (--) NVIDIA(0): DPY-0
    [ 2030.591] (--) NVIDIA(0): VGA-0
    [ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): No EDID Available.
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2030.591] (**) NVIDIA(0): all display devices.)
    [ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
    [ 2030.593] (II) NVIDIA(0): CRT-0
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (II) NVIDIA(0): Requested modes:
    [ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Validated MetaModes:
    [ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
    [ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
    [ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Offset : +0 +0
    [ 2030.593] (II) NVIDIA(0): Panning
    [ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
    [ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
    [ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
    [ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2030.596] (--) Depth 24 pixmap format is 32 bpp
    [ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2030.597] (II) NVIDIA: access.
    [ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
    [ 2030.599] (II) NVIDIA(0): GPU initialized
    [ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
    [ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
    [ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
    [ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 2030.619] (II) NVIDIA(0): First mode initialized
    [ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
    [ 2030.629] (II) NVIDIA(0): Using built-in logo image.
    [ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
    [ 2030.641] Loading extension NV-GLX
    [ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 2030.689] (II) NVIDIA(0): Visuals set up
    [ 2030.689] (II) NVIDIA(0): Pixmap depths set up
    [ 2030.690] (II) NVIDIA(0): GLX visuals set up
    [ 2030.690] (II) NVIDIA(0): Framebuffer set up
    [ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 2030.690] (==) NVIDIA(0): Backing store enabled
    [ 2030.690] (==) NVIDIA(0): Silken mouse enabled
    [ 2030.690] (II) NVIDIA(0): Default colormap initialized.
    [ 2030.690] (II) NVIDIA(0): Palette loaded
    [ 2030.690] (**) NVIDIA(0): DPMS enabled
    [ 2030.690] Loading extension NV-CONTROL
    [ 2030.690] Loading extension XINERAMA
    [ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
    [ 2030.690] (II) Loading sub module "dri2"
    [ 2030.690] (II) LoadModule: "dri2"
    [ 2030.690] (II) Module "dri2" already built-in
    [ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2030.690] (II) NVIDIA(0): Screen initialization complete
    [ 2030.690] (--) RandR disabled
    [ 2030.695] (II) Initializing extension GLX
    [ 2030.726] (II) XKB: Reusing cached keymap
    [ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2030.728] (II) LoadModule: "evdev"
    [ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
    [ 2030.728] compiled for 1.15.0, module version = 2.8.2
    [ 2030.728] Module class: X.Org XInput Driver
    [ 2030.728] ABI class: X.Org XInput driver, version 20.0
    [ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
    [ 2030.728] Option "XkbRules" "evdev"
    [ 2030.728] Option "XkbModel" "pc104"
    [ 2030.728] Option "XkbLayout" "us"
    [ 2030.728] Option "_source" "server/udev"
    [ 2030.728] Option "name" "Power Button"
    [ 2030.728] Option "path" "/dev/input/event2"
    [ 2030.728] Option "device" "/dev/input/event2"
    [ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.728] Option "driver" "evdev"
    [ 2030.728] (**) Power Button: always reports core events
    [ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2030.729] (--) evdev: Power Button: Found keys
    [ 2030.729] (II) evdev: Power Button: Configuring as keyboard
    [ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2030.729] (**) Option "xkb_rules" "evdev"
    [ 2030.729] (**) Option "xkb_model" "pc104"
    [ 2030.729] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2030.748] (II) No input driver specified, ignoring this device.
    [ 2030.748] (II) This device may have been added with another device file.
    [ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
    [ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
    [ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
    [ 2030.748] Option "XkbRules" "evdev"
    [ 2030.748] Option "XkbModel" "pc104"
    [ 2030.748] Option "XkbLayout" "us"
    [ 2030.748] Option "_source" "server/udev"
    [ 2030.748] Option "name" "HP Truevision HD"
    [ 2030.748] Option "path" "/dev/input/event7"
    [ 2030.748] Option "device" "/dev/input/event7"
    [ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] Option "driver" "evdev"
    [ 2030.748] (**) HP Truevision HD: always reports core events
    [ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
    [ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
    [ 2030.748] (--) evdev: HP Truevision HD: Found keys
    [ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
    [ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
    [ 2030.748] (**) Option "xkb_rules" "evdev"
    [ 2030.748] (**) Option "xkb_model" "pc104"
    [ 2030.748] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) XKB: Reusing cached keymap
    [ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "AT Translated Set 2 keyboard"
    [ 2030.750] Option "path" "/dev/input/event0"
    [ 2030.750] Option "device" "/dev/input/event0"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 2030.750] (**) Option "xkb_rules" "evdev"
    [ 2030.750] (**) Option "xkb_model" "pc104"
    [ 2030.750] (**) Option "xkb_layout" "us"
    [ 2030.750] (II) XKB: Reusing cached keymap
    [ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
    [ 2030.750] Option "path" "/dev/input/event10"
    [ 2030.750] Option "device" "/dev/input/event10"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
    [ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2030.752] Option "XkbRules" "evdev"
    [ 2030.752] Option "XkbModel" "pc104"
    [ 2030.752] Option "XkbLayout" "us"
    [ 2030.752] Option "_source" "server/udev"
    [ 2030.752] Option "name" "HP WMI hotkeys"
    [ 2030.752] Option "path" "/dev/input/event9"
    [ 2030.752] Option "device" "/dev/input/event9"
    [ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] Option "driver" "evdev"
    [ 2030.752] (**) HP WMI hotkeys: always reports core events
    [ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
    [ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
    [ 2030.752] (**) Option "xkb_rules" "evdev"
    [ 2030.752] (**) Option "xkb_model" "pc104"
    [ 2030.752] (**) Option "xkb_layout" "us"
    [ 2030.752] (II) XKB: Reusing cached keymap
    [ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.256] (**) NVIDIA(0): all display devices.)
    [ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.257] (II) NVIDIA(GPU-0):
    [ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.258] (II) NVIDIA(GPU-0):
    [ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.506] (**) NVIDIA(0): all display devices.)
    [ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2046.582] (II) evdev: HP WMI hotkeys: Close
    [ 2046.582] (II) UnloadModule: "evdev"
    [ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
    [ 2046.623] (II) UnloadModule: "evdev"
    [ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2046.663] (II) UnloadModule: "evdev"
    [ 2046.702] (II) evdev: HP Truevision HD: Close
    [ 2046.702] (II) UnloadModule: "evdev"
    [ 2046.741] (II) evdev: Power Button: Close
    [ 2046.741] (II) UnloadModule: "evdev"
    [ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 2046.795] (EE) Server terminated successfully (0). Closing log file.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "Module"
    Load "glx"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Unknown"
    # ModelName "Unknown"
    # HorizSync 28.0 - 33.0
    # VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    # Option "UseEDID" "true"
    Option "ConnectedMonitor" "DFP-0"
    # Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    dmesg :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
    [ 0.000000] 9 base 260000000 mask FE0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 000040
    [ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
    [ 0.000000] On node 0 totalpages: 2070351
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9799 pages used for memmap
    [ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22488 pages used for memmap
    [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.589 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000030] Yama: becoming mindful.
    [ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002614] Mount-cache hash table entries: 256
    [ 0.002739] Initializing cgroup subsys memory
    [ 0.002743] Initializing cgroup subsys devices
    [ 0.002744] Initializing cgroup subsys freezer
    [ 0.002746] Initializing cgroup subsys net_cls
    [ 0.002747] Initializing cgroup subsys blkio
    [ 0.002763] CPU: Physical Processor ID: 0
    [ 0.002764] CPU: Processor Core ID: 0
    [ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003048] mce: CPU supports 9 MCE banks
    [ 0.003058] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.003906] ACPI: Core revision 20131115
    [ 0.009053] ACPI: All ACPI Tables successfully acquired
    [ 0.053822] ftrace: allocating 21057 entries in 83 pages
    [ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.094948] TSC deadline timer enabled
    [ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.094960] ... version: 3
    [ 0.094960] ... bit width: 48
    [ 0.094961] ... generic registers: 4
    [ 0.094962] ... value mask: 0000ffffffffffff
    [ 0.094962] ... max period: 0000ffffffffffff
    [ 0.094963] ... fixed-purpose events: 3
    [ 0.094964] ... event mask: 000000070000000f
    [ 0.121742] x86: Booting SMP configuration:
    [ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.256907] x86: Booted up 1 node, 8 CPUs
    [ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
    [ 0.262487] devtmpfs: initialized
    [ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.265037] RTC time: 21:55:49, date: 02/28/14
    [ 0.265063] NET: Registered protocol family 16
    [ 0.265128] cpuidle: using governor ladder
    [ 0.265129] cpuidle: using governor menu
    [ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.265148] ACPI: bus type PCI registered
    [ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.282064] PCI: Using configuration type 1 for base access
    [ 0.282527] bio: create slab <bio-0> at 0
    [ 0.282615] ACPI: Added _OSI(Module Device)
    [ 0.282616] ACPI: Added _OSI(Processor Device)
    [ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
    [ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
    [ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
    [ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
    [ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.313310] ACPI: Dynamic OEM Table Load:
    [ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.326272] ACPI: Dynamic OEM Table Load:
    [ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 0.339508] ACPI: Dynamic OEM Table Load:
    [ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 1.238575] ACPI: Interpreter enabled
    [ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 1.238594] ACPI: (supports S0 S3 S4 S5)
    [ 1.238595] ACPI: Using IOAPIC for interrupt routing
    [ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
    [ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.321214] \_SB_.PCI0:_OSC invalid UUID
    [ 1.321215] _OSC request data:1 1f 0
    [ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.321676] PCI host bridge to bus 0000:00
    [ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
    [ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
    [ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
    [ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
    [ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
    [ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
    [ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
    [ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
    [ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
    [ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
    [ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
    [ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
    [ 1.331423] pci 0000:08:00.0: supports D1 D2
    [ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
    [ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
    [ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
    [ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
    [ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
    [ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
    [ 1.344234] pci 0000:0b:00.0: supports D1 D2
    [ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
    [ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.381661] Found 1 acpi root devices
    [ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.381740] vgaarb: loaded
    [ 1.381741] vgaarb: bridge control possible 0000:01:00.0
    [ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.381759] PCI: Using ACPI for IRQ routing
    [ 1.387711] PCI: pci_cache_line_size set to 64 bytes
    [ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
    [ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
    [ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [ 1.387910] NetLabel: Initializing
    [ 1.387911] NetLabel: domain hash size = 128
    [ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.387923] NetLabel: unlabeled traffic allowed by default
    [ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.389961] Switched to clocksource hpet
    [ 1.392856] pnp: PnP ACPI init
    [ 1.392865] ACPI: bus type PNP registered
    [ 1.392884] pnp 00:00: [dma 4]
    [ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
    [ 1.393028] system 00:04: [io 0xffff] has been reserved
    [ 1.393029] system 00:04: [io 0xffff] has been reserved
    [ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
    [ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.393478] pnp: PnP ACPI: found 12 devices
    [ 1.393479] ACPI: bus type PNP unregistered
    [ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
    [ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
    [ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
    [ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
    [ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
    [ 1.399530] NET: Registered protocol family 2
    [ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.399860] TCP: reno registered
    [ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399937] NET: Registered protocol family 1
    [ 1.399946] pci 0000:00:02.0: Boot video device
    [ 1.780500] PCI: CLS 64 bytes, default 64
    [ 1.780530] Unpacking initramfs...
    [ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
    [ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
    [ 1.820794] Simple Boot Flag at 0x44 set to 0x1
    [ 1.820989] Scanning for low memory corruption every 60 seconds
    [ 1.821175] audit: initializing netlink socket (disabled)
    [ 1.821183] type=2000 audit(1393624549.773:1): initialized
    [ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.831019] zbud: loaded
    [ 1.831130] VFS: Disk quotas dquot_6.5.2
    [ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.831254] msgmni has been set to 15764
    [ 1.831287] Key type big_key registered
    [ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.831523] io scheduler noop registered
    [ 1.831524] io scheduler deadline registered
    [ 1.831539] io scheduler cfq registered (default)
    [ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 1.832123] vesafb: scrolling: redraw
    [ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
    [ 1.946268] Console: switching to colour frame buffer device 240x67
    [ 2.059378] fb0: VESA VGA frame buffer device
    [ 2.059386] intel_idle: MWAIT substates: 0x21120
    [ 2.059387] intel_idle: v0.4 model 0x3A
    [ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.059528] GHES: HEST is not enabled!
    [ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.059853] Linux agpgart interface v0.103
    [ 2.059899] rtc_cmos 00:05: RTC can wake from S4
    [ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.060039] Intel P-state driver initializing.
    [ 2.060046] Intel pstate controlling: cpu 0
    [ 2.060056] Intel pstate controlling: cpu 1
    [ 2.060066] Intel pstate controlling: cpu 2
    [ 2.060075] Intel pstate controlling: cpu 3
    [ 2.060081] Intel pstate controlling: cpu 4
    [ 2.060087] Intel pstate controlling: cpu 5
    [ 2.060094] Intel pstate controlling: cpu 6
    [ 2.060101] Intel pstate controlling: cpu 7
    [ 2.060170] drop_monitor: Initializing network drop monitor service
    [ 2.060205] TCP: cubic registered
    [ 2.060258] NET: Registered protocol family 10
    [ 2.060356] NET: Registered protocol family 17
    [ 2.060361] Key type dns_resolver registered
    [ 2.060562] registered taskstats version 1
    [ 2.061180] Magic number: 2:200:956
    [ 2.061210] memory memory9: hash matches
    [ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
    [ 2.061289] PM: Hibernation image not present or could not be loaded.
    [ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 2.061822] Write protecting the kernel read-only data: 8192k
    [ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 2.070995] systemd-udevd[76]: starting version 208
    [ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
    [ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 2.087062] ACPI: bus type USB registered
    [ 2.087089] usbcore: registered new interface driver usbfs
    [ 2.087162] usbcore: registered new interface driver hub
    [ 2.087210] usbcore: registered new device driver usb
    [ 2.087615] SCSI subsystem initialized
    [ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.087987] ehci-pci: EHCI PCI platform driver
    [ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.088526] libata version 3.00 loaded.
    [ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
    [ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.104041] hub 1-0:1.0: USB hub found
    [ 2.104046] hub 1-0:1.0: 2 ports detected
    [ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
    [ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.117508] hub 2-0:1.0: USB hub found
    [ 2.117514] hub 2-0:1.0: 2 ports detected
    [ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 2.118100] hub 3-0:1.0: USB hub found
    [ 2.118108] hub 3-0:1.0: 4 ports detected
    [ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 2.118452] hub 4-0:1.0: USB hub found
    [ 2.118462] hub 4-0:1.0: 4 ports detected
    [ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.150760] ahci 0000:00:1f.2: version 3.0
    [ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
    [ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 2.171405] scsi0 : ahci
    [ 2.171666] scsi1 : ahci
    [ 2.171894] scsi2 : ahci
    [ 2.172116] scsi3 : ahci
    [ 2.172313] scsi4 : ahci
    [ 2.172447] scsi5 : ahci
    [ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
    [ 2.172514] ata2: DUMMY
    [ 2.172516] ata3: DUMMY
    [ 2.172517] ata4: DUMMY
    [ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
    [ 2.172520] ata6: DUMMY
    [ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 2.512780] ata1.00: configured for UDMA/133
    [ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
    [ 2.524950] ata5.00: configured for UDMA/100
    [ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 2.534925] hub 1-1:1.0: USB hub found
    [ 2.534975] hub 1-1:1.0: 6 ports detected
    [ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
    [ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.651588] systemd[1]: No hostname configured.
    [ 2.651596] systemd[1]: Set hostname to <localhost>.
    [ 2.653530] random: systemd urandom read with 42 bits of entropy available
    [ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
    [ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.687572] systemd[1]: Starting Login Prompts.
    [ 2.687585] systemd[1]: Reached target Login Prompts.
    [ 2.687595] systemd[1]: Starting Remote File Systems.
    [ 2.687605] systemd[1]: Reached target Remote File Systems.
    [ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.687822] systemd[1]: Starting Paths.
    [ 2.687832] systemd[1]: Reached target Paths.
    [ 2.687842] systemd[1]: Starting Journal Socket.
    [ 2.687878] systemd[1]: Listening on Journal Socket.
    [ 2.687895] systemd[1]: Mounting Debug File System...
    [ 2.688266] systemd[1]: Starting Journal Service...
    [ 2.688521] systemd[1]: Started Journal Service.
    [ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 2.708483] FS-Cache: Loaded
    [ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.713390] RPC: Registered named UNIX socket transport module.
    [ 2.713392] RPC: Registered udp transport module.
    [ 2.713393] RPC: Registered tcp transport module.
    [ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 2.741906] systemd-udevd[202]: starting version 208
    [ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 2.791210] ACPI: Lid Switch [LID0]
    [ 2.791504] [drm] Initialized drm 1.1.0 20060810
    [ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.791609] ACPI: Power Button [PWRF]
    [ 2.792665] wmi: Mapper loaded
    [ 2.792681] hp_accel: laptop model unknown, using default axes configuration
    [ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
    [ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.816644] Copyright(c) 2003-2013 Intel Corporation
    [ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
    [ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.818636] platform microcode: Direct firmware load failed with error -2
    [ 2.818639] platform microcode: Falling back to user helper
    [ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
    [ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.828014] usbcore: registered new interface driver usbhid
    [ 2.828016] usbhid: USB HID core driver
    [ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 2.835666] usbcore: registered new interface driver snd-usb-audio
    [ 2.854044] iTCO_vendor_support: vendor-support=0
    [ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.860514] platform microcode: Direct firmware load failed with error -2
    [ 2.860516] platform microcode: Falling back to user helper
    [ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
    [ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
    [ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.867498] platform microcode: Direct firmware load failed with error -2
    [ 2.867500] platform microcode: Falling back to user helper
    [ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870100] platform microcode: Direct firmware load failed with error -2
    [ 2.870102] platform microcode: Falling back to user helper
    [ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870561] platform microcode: Direct firmware load failed with error -2
    [ 2.870563] platform microcode: Falling back to user helper
    [ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871285] platform microcode: Direct firmware load failed with error -2
    [ 2.871288] platform microcode: Falling back to user helper
    [ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871949] platform microcode: Direct firmware load failed with error -2
    [ 2.871952] platform microcode: Falling back to user helper
    [ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.872254] platform microcode: Direct firmware load failed with error -2
    [ 2.872257] platform microcode: Falling back to user helper
    [ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
    [ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
    [ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.941825] hub 2-1:1.0: USB hub found
    [ 2.941930] hub 2-1:1.0: 8 ports detected
    [ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
    [ 3.074806] lis3lv02d: 8 bits 3DC sensor found
    [ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.233045] Disabling lock debugging due to kernel taint
    [ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
    [ 3.356112] media: Linux media interface: v0.10
    [ 3.360422] Linux video capture interface: v2.00
    [ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
    [ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
    [ 3.377488] usbcore: registered new interface driver uvcvideo
    [ 3.377494] USB Video Class driver (1.1.1)
    [ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
    [ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
    [ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 3.521478] Bluetooth: Core ver 2.17
    [ 3.521492] NET: Registered protocol family 31
    [ 3.521493] Bluetooth: HCI device and connection manager initialized
    [ 3.521499] Bluetooth: HCI socket layer initialized
    [ 3.521501] Bluetooth: L2CAP socket layer initialized
    [ 3.521505] Bluetooth: SCO socket layer initialized
    [ 3.523209] usbcore: registered new interface driver btusb
    [ 3.597251] r8169 0000:0b:00.0 eno1: link down
    [ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
    [ 3.825665] Switched to clocksource tsc
    [ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
    [ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [ 4.107557] mousedev: PS/2 mouse device common for all mice
    [ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
    [ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
    [ 4.606281] [Firmware Bug]: No valid trip found
    [ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
    [ 5.283560] random: nonblocking pool is initialized
    [ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
    [ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
    [ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
    [ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
    [ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
    [ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
    [ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
    lsmod
    Module Size Used by
    joydev 9631 0
    mousedev 10247 0
    btusb 19648 0
    bluetooth 326343 2 btusb
    uvcvideo 72804 0
    videobuf2_vmalloc 3304 1 uvcvideo
    videobuf2_memops 2335 1 videobuf2_vmalloc
    videobuf2_core 28243 1 uvcvideo
    videodev 111840 2 uvcvideo,videobuf2_core
    media 11719 2 uvcvideo,videodev
    nvidia 10621191 29
    intel_rapl 11776 0
    x86_pkg_temp_thermal 6991 0
    intel_powerclamp 8802 0
    coretemp 6358 0
    kvm_intel 131532 0
    kvm 396221 1 kvm_intel
    crct10dif_pclmul 4682 0
    crct10dif_common 1372 1 crct10dif_pclmul
    crc32_pclmul 2923 0
    crc32c_intel 14185 0
    ghash_clmulni_intel 4405 0
    aesni_intel 45548 0
    aes_x86_64 7399 1 aesni_intel
    lrw 3565 1 aesni_intel
    gf128mul 5858 1 lrw
    glue_helper 4417 1 aesni_intel
    ablk_helper 2004 1 aesni_intel
    cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    hid_generic 1153 0
    hp_wmi 7595 0
    sparse_keymap 3146 1 hp_wmi
    arc4 2000 2
    iTCO_wdt 5407 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    mxm_wmi 1467 0
    iwldvm 167738 0
    mac80211 474681 1 iwldvm
    snd_usb_audio 117811 0
    usbhid 40545 0
    snd_usbmidi_lib 19755 1 snd_usb_audio
    hid 90902 2 hid_generic,usbhid
    snd_rawmidi 18742 1 snd_usbmidi_lib
    snd_seq_device 5180 1 snd_rawmidi
    microcode 15216 0
    evdev 11045 11
    psmouse 88171 0
    snd_hda_codec_hdmi 36379 1
    iwlwifi 140193 1 iwldvm
    serio_raw 5009 0
    snd_hda_codec_idt 43508 1
    cfg80211 408199 3 iwlwifi,mac80211,iwldvm
    i2c_i801 11269 0
    rtsx_pci_ms 7258 0
    r8169 58423 0
    memstick 7504 1 rtsx_pci_ms
    rfkill 15651 4 cfg80211,hp_wmi,bluetooth
    mii 4027 1 r8169
    thermal 8556 0
    snd_hda_intel 37352 0
    snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    intel_gtt 12664 0
    drm_kms_helper 35710 0
    snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
    drm 239102 3 drm_kms_helper,nvidia
    battery 7565 0
    snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    ac 3334 0
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    hp_accel 16520 0
    i2c_algo_bit 5391 0
    mei_me 9552 0
    i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
    lis3lv02d 11283 1 hp_accel
    input_polldev 2818 1 lis3lv02d
    snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    shpchp 25425 0
    mei 62867 1 mei_me
    wmi 8251 2 hp_wmi,mxm_wmi
    video 11425 0
    soundcore 5418 1 snd
    lpc_ich 13368 0
    processor 24620 0
    button 4605 0
    nfs 191568 0
    lockd 76942 1 nfs
    sunrpc 233786 2 nfs,lockd
    fscache 47797 1 nfs
    ext4 473259 2
    crc16 1359 2 ext4,bluetooth
    mbcache 6074 1 ext4
    jbd2 80912 1 ext4
    sr_mod 14930 0
    cdrom 34880 1 sr_mod
    sd_mod 31361 3
    atkbd 16806 0
    libps2 4187 2 atkbd,psmouse
    rtsx_pci_sdmmc 13911 0
    mmc_core 95465 1 rtsx_pci_sdmmc
    ahci 23048 2
    libahci 21698 1 ahci
    libata 172104 2 ahci,libahci
    ehci_pci 3928 0
    xhci_hcd 144553 0
    ehci_hcd 64171 1 ehci_pci
    scsi_mod 132250 3 libata,sd_mod,sr_mod
    rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
    usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    usb_common 1648 1 usbcore
    i8042 13366 1 libps2
    serio 10721 6 serio_raw,atkbd,i8042,psmouse

  • MY EXTERNAL SPEAKER PORT IS NOT WORKING for hp envy

     MY EXTERNAL SPEAKER PORT IS NOT WORKING .WHEN I CONNECTED TO A EXTERNAL SPEAKER ,THERE WERE NO SOUND AUDIBLE.SO WHEN I DISCONNECTED THE CABLE FROM PORT,I WAS ABLE TO HEAR WITH THE IN BUILT SPEAKERS.EXTERNAL SPEAKER IS I GOOD CONDITION.I CHEKED WITH MY HEAD SET ALSO.IT WAS NOT AUDIBLE.MY LAP IS HP ENVY .KINDLY HELP

    Hi ano87, welcome to the HP Forums. What is the model or product number? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Auto brightness not working in iOS 5.0.1

    Auto brightness on iPad 1 not working properly? Well known bug? Battery level is also terrible.
    Any ideas?

    The same problem on my ipad2 in ios 5.0.1
    1. with smart cover
       - set autobrightness on and bright level  half ,  no password
       - close smart cover and open cover
       - ipad2 screen is very dark and does not change until power off &amp; on
    2. No smart cover
      - does not change bright in any places(dark room, sunlight, living room etc)
    But no battery problem on my ipad2

  • Probook 450 G2 hotkeys for brightness not working with windows 8.1

    Hi Please help solve this issue, since (fn+f8/f9) which by default are  supposed to increase or decrease light are not doing so. on windows 8.1. i followed instruction on :- http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ProBook-430-G2-Windows-8-1-brightness-controls-do-not-work/td-p/4692100 and http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04354128 (which gave me "(Error: system-websrv_unavail)") they were not of any help. please refer me to a working link if there exists any with the solution. thanks

    Hello  Issue could be cause by drivers. I suggest you to install HP SoftPaq Download Manager
    This software detects what drivers are missing and auto update it.
    For more information consult:
    http://www8.hp.com/us/en/ads/clientmanagement/drivers-bios.html?jumpid=va_r11260_go_clientmanagement_ssml#system-sw-mng
    To download:
    ftp://ftp.hp.com/pub/caps-softpaq/HP_SDM_Setup.exe Regards

  • Satellite M35 - Brightness Not working with WXP SP2

    After formatting and installing XP SP2, Brighness function keys do not work. Can anyone please point me to what type of drivers I need to download to get the Brightness working? I tried to install Power Saver from Toshiba site BUT I get error messages. Nto sure if this driver is for Service Pack 2 of XP.
    Any assistance you can give in getting the M35 Satellite Brightness working with XP Service Pack 2 would be appreciate.
    Thank you in advance.

    Hello
    Try please to install Toshiba Hotkey Utility for Display Devices for Windows XP. I dont know if just this utility is responsible for that but fact is that you should install all Toshiba specific stuff and combination of those tools result with full functionality.
    If you dont have Tools & Utilities CD please check Toshiba US download page and there you will find everything you need.

  • Lenovo B570e brightness not working

    i have bought lenovo B570e nine months ago. everything was going fine. now i have reinstalled the win 7 but brightness control is not working. other Fn keys are working correctly except brightness. laptop brightness is stuck to maximum. kindly help me out. thanks in advance

    hi zaidi7,
    Thanks for Using Lenovo Community Forums!
    Can we try installing this Driver for your Display
    Intel Wireless Display Driver
    89zz04ww.exe
    115.24 MB
    And try uninstalling the Lenovo Energy managerment Software under control panel / Programs and features uninstall
    and reinstall this
    Lenovo Energy Management Software
    CAEZ19WW.exe
    13.7 MB
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • [SOLVED] ASUS Screen Brightness Not Working

    I have been trying for a few hours to get my screen brightness to work properly. I'm on an ASUS Zenbook Prime UX31A with kernel 3.9.6-1. I'm using efibootmgr to boot.
    According to the wiki page and numerous posts, I need to use the acpi_osi="!Windows 2012" boot parameter. When I set it using efibootmgr, the keyboard backlight keys work (Fn+F[34]), but the screen brightness keys (Fn+F[56]) do not work. I have tried the following in efibootmgr:
    # efibootmgr -c -w -d /dev/sda -p 1 -L "Arch Linux" -l '\EFI\arch\vmlinuz-arch.efi' -u initrd=EFI/arch/initramfs-arch.img root=UUID=d0b32080-84f0-4c6b-933b-f62b880afc09 ro rootfstype=ext4 efi_no_storage_paranoia elevator=noop acpi_osi=Linux add_efi_memmap
    # efibootmgr -c -w -d /dev/sda -p 1 -L "Arch Linux" -l '\EFI\arch\vmlinuz-arch.efi' -u initrd=EFI/arch/initramfs-arch.img root=UUID=d0b32080-84f0-4c6b-933b-f62b880afc09 ro rootfstype=ext4 efi_no_storage_paranoia elevator=noop acpi_osi=intel add_efi_memmap
    # efibootmgr -c -w -d /dev/sda -p 1 -L "Arch Linux" -l '\EFI\arch\vmlinuz-arch.efi' -u initrd=EFI/arch/initramfs-arch.img root=UUID=d0b32080-84f0-4c6b-933b-f62b880afc09 ro rootfstype=ext4 efi_no_storage_paranoia elevator=noop acpi_osi= add_efi_memmap
    and a few others. The particularly peculiar thing is when I use a UEFI shell to boot with my script:
    echo -on
    \EFI\arch\vmlinuz-arch.efi root=UUID=d0b32080-84f0-4c6b-933b-f62b880afc09 ro rootfstype=ext4 add_efi_memmap efi_no_storage_paranoia initrd=EFI/arch/initramfs-arch.img elevator=noop acpi_osi="!Windows 2012"
    it works fine (both keyboard backlight and screen brightness).
    What am I doing wrong? My hunch is that I'm doing something wrong with the formatting of acpi_osi="!Windows 2012" but I'm pretty sure I've tried every combination of different quotes and escaping different things. It's also worth nothing that the "!" gets interpreted by bash in some of these permutations making efibootmgr not actually run.
    Last edited by tobit (2013-06-30 02:37:30)

    WonderWoofy wrote:
    Because you are entering it in a shell, you need to escape some of the things in the acpi_osi="!Windows 2012" string.  So for example, the double quotes are intended to be entered exactly as is in the resulting efibootmgr entry, so these should be esacped since they would otherwise have a special meaning in the command line.  The same is true for the exclamation point.  So I think you would have to do:
    efibootmgr -c -w -d /dev/sda -p 1 -L "Arch Linux" -l '\EFI\arch\vmlinuz-arch.efi' -u "initrd=/EFI/arch/initramfs-arch.img root=UUID=d0b32080-84f0-4c6b-933b-f62b880afc09 ro rootfstype=ext4 efi_no_storage_paranoia elevator=noop acpi_osi=\"\!Windows 2012\" add_efi_memmap"
    BTW, this is just a copy/paste of one of the entries above (slightly fixed).  I added a '/' to your initrd entry, as it is supposed to be an absolute path, not a relative one.
    Edit: I too started out with a direct efibootmgr entry when getting to know UEFI.  But I think that a better solution is to use a boot manager.  I like gummiboot, but I also keep rEFInd set up as well.  By doing this, if you ever want to chane something on your kernel command line, you can just edit the config before reboot.  But I think that were it is really useful is if you need to modify the kernel command line before you boot, as it is not possible with a direct efibootmgr entry.  If you want to make it seem seamless, just set the timeout to zero in efibootmgr, and then if you want to get to the menu, you just hold the spacebar while booting. 
    The reason I wanted to use a direct efibootmgr entry was because I thought it would be faster.  But because gummiboot and systemd will actually give you the time it takes to boot which includes the time in the firmware (POST) as well as the time it takes to get through the boot manager, I have actually found that my system takes a whole 14ms from the end of POST to starting to load the kernel.
    Edit2: BTW, I also quoted the entire srting of arguments on the kernel command line, which it need in order to be fed to the '-u' option as a single string.
    I'm afraid that still doesn't work. I've tried similar things and tried that specifically.  In case you're wondering, the command you listed gives me the following output:
    $ sudo efibootmgr -v
    BootCurrent: 0000
    Timeout: 2 seconds
    BootOrder: 0000
    Boot0000* Arch Linux HD(1,800,96000,bee2185e-de97-4dc0-9614-830639991bc3)File(\EFI\arch\vmlinuz-arch.efi)i.n.i.t.r.d.=./.E.F.I./.a.r.c.h./.i.n.i.t.r.a.m.f.s.-.a.r.c.h...i.m.g. .r.o.o.t.=.U.U.I.D.=.d.0.b.3.2.0.8.0.-.8.4.f.0.-.4.c.6.b.-.9.3.3.b.-.f.6.2.b.8.8.0.a.f.c.0.9. .r.o. .r.o.o.t.f.s.t.y.p.e.=.e.x.t.4. .e.f.i._.n.o._.s.t.o.r.a.g.e._.p.a.r.a.n.o.i.a. .e.l.e.v.a.t.o.r.=.n.o.o.p. .a.c.p.i._.o.s.i.=.".\.!.W.i.n.d.o.w.s. .2.0.1.2.". .a.d.d._.e.f.i._.m.e.m.m.a.p...
    I also tried putting the -u argument in single quotes so that I don't have to escape the double quotes or the !. That also didn't work. Thanks for your suggestions, I'd be happy to try more, I've tried a lot already to no avail :-(
    count0 wrote:On my Asus X201E, the screen brightness keys only work when I add "acpi_osi=" to my kernel parameters, with no arguments. You could try that.
    That's the third option I say that I tried in my original post.

  • Auto Brightness not working on 3gs ios 6.1.2

    I'm using auto brightness from the very biginning of using iPhone....It works good before...But now a days I'm facing a problem..My phone get brighter under light,but it does not get dim when I goes in dark enviroment....I followed the way to set auto brightness from some video tutorial from you tube,I saw the slider moves according to light source.But not working for me....Is this a bug of ios 6.1.2 or am I only suffering from this...
    Plz Some1 Help Me or Suggest for what to do.....

    I'm using auto brightness from the very biginning of using iPhone....It works good before...But now a days I'm facing a problem..My phone get brighter under light,but it does not get dim when I goes in dark enviroment....I followed the way to set auto brightness from some video tutorial from you tube,I saw the slider moves according to light source.But not working for me....Is this a bug of ios 6.1.2 or am I only suffering from this...
    Plz Some1 Help Me or Suggest for what to do.....

  • Brightness not working

    hello hp my brightness key is not working and it also not working through settings i have tried updating display derivers by selecting from my laptop through this video  (https://www.youtube.com/watch?v=BZw3wD8oTRI) but it doesnot work what should i do please reply quickly

    Sorry to hear the bad news. Unfortunately, this sort of repair is very difficult for an amateur and is best carried out by an Apple Authorised repairer.  It will probably cost several hundred dollars.  Since the damage is accidental, it's worth checking to see if your household insurance will cover the cost.
    If you still think you want to try to repair it yourself, the site www.ifixit.com is a good place to start.
    Bob

  • HT201401 Automatic brightness not working

    When I go the the bright places the iphone screen becomes bright and when i go back to the dark place the iphone screen doesnt dimm..that is it is not working in reverse...it only detects the brightness of the surrounding of it doesnt sence the darkness ..
    hence my iphone is all time in full brightness once it senses the brightness of the surrounding.
    what can be the solution ?

    I think I have discovered the problem. The system remembers where you have manually set the brightness, and tries to stay around that level even when moving from bright to dark rooms.
    I manually set the brightness to 5/8, waited a minute, then went outside in the sun. As expected, it adjusted to max. However, when I came back inside and sat down, it only went down to 5/8 again. I guess earlier when it was going down to 3/8, it was just trying to get back to my manual setting (I had set it to 3/8 this morning while in my dark bedroom). Even if I completely cover the sensor, the brightness now only goes down to about 4/8.
    On the MacBook, it used the full range of brightness and completely ignored any previous manual settings. I could use the automatic feature to completely control the brightness at all times. Now, with the Air, the automatic feature instead tries to maintain the user-selected brightness level as much as possible.
    I'm not sure which style I prefer. I did like not having to ever touch the brightness buttons, although I admit it was occasionally too dim in certain situations. I would prefer that the Air dim much more when in completely dark rooms, and maybe the sensitivity of the sensor should be increased a bit.
    Now the only issue is how the keyboard backlight seems to stay on in all conditions except in the sun! It is on now even though it is obviously bright enough in the room to read a paperback book, let alone a keyboard.

  • Tremulous brightness not working.

    I think this is caused by the new xorg but I'm not sure. The brightness adjustment under tremulous has stopped working around the time I updated my xorg recently. Brightness adjustment works using xbacklight, but tremulous has it's own (fake?) brightness adjustment which just brightens the game colors, not really the backlight. It just stopped working. I tried tremulous, tremulous-updated, and tremfusion-hg, all are affected by this. Any ideas?

    Ingar wrote:
    Try setting the r_gamma variable, pull down the console with the ~ key and type
    r_gamma 1.4
    If you want to save the setting, type
    seta r_gamma 1.4
    The official Tremulous Forum can probably help you with general questions.
    Thanks, but unfortunately that didn't work.

  • T440 Display Brightness Not Working

    After the first time I put my piece of crap T440 to sleep, the keyboard keys for changing screen brightness stop working - no effect, & no on-screen desplay. Given the generally horrible feature set of this machine, I am not too surprised. I downloade & installed the power management program, the pm driver, the on-screen display driver, and a box of chocolates. Anybody got any ideas?
    Solved!
    Go to Solution.

    Known Windows 7 issue: https://support.microsoft.com/kb/2752407
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Maybe you are looking for

  • Install error for Chart Server for Siebel 8.1.1.1

    Hello all, I have Siebel 8.1.1.0 installed, and the 8.1.1.1 patch applied. It's been stable for a while now, but I've decided to get the charts functionality working, and am having trouble with the installer. Basically, I get library errors, and the

  • Cant multiple Bounce HELP

    Can any help if i want to bounce a email i can only bounce 1 at a time if i select all and bounce i end up all ways having to force quit since the new 10.5.5 update i think. can any one help thanks Mark

  • Trying to restore the iPod

    a while a go, i had to send my iPod (engraved) into service because it started to react slowly and stuff (i chose not to get the engraved one back), a while afterwards i got a "new" iPod back (i have the 20GB version without a colordisplay "clickwhee

  • How to reset particular fields in the Form

    hi there i am using a reset button to reset the form, but it resets the whole form including data which is bound with XML. i would like to know whether i can reset particular fields in the form excluding the XML bound fields. any examples would be ap

  • InDesign crashes in SnapshotUtils

    I am using SnapshotUtils::ExportImageToJPEG to create images of document pages. Everything works normally fine, but InDesign (CS2) crashes somewhere deep in SnapshotUtils, if the document contains transparent elements and if I try to scale the image