Brightness resets after restart

recently the brightness has started to reset every time i restart. im not sure why... anyone have an explanation?

There's a trick that some have reported to work. Go to System Preferences, change the screen resolution to something different, then back again. My guess is that this forces the PRAM settings to be saved, when for unknown reasons another change doesn't.

Similar Messages

Why do my sound output settings keep resetting after restart?

Just bought a MBPro with OS 10.6.4.
After restarting my sound output settings keep resetting to Soundflower (2ch) from Internal speakers.
It doesn't take too much to change it, but it is pretty annoying and I'm assuming there's some obscure setting that can fix this.
Anyone able to help?

This fixed it on my Mac Pro. It might work on a MacBook Pro.
Delete these three files:
/Library/Preferences/com.apple.soundpref.plist
/Library/Preferences/Audio/com.apple.audio.DeviceSettings.plist
/Library/Preferences/Audio/com.apple.audio.SystemSettings.plist
Reselect whatever sound device you want as your default in the Sound Preference Pane.
Restart the computer.

Targets reset after restart of wlserver 6.1

Hi,
after restarting WLServer6.1 under Win2000, all targets (Connection Pool, TX DataSource)
are reset. After several manual attemps in console to assign target, the config.xml
element
<target> contains many entries (like <target>localhost,localhost,localhost</target>
Any idea??
Tnx in advance
Jens

Hi AEEA-Family,
I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
I've just made the following changes on my Phone and all seems ok again.
Here are the steps I took to resolve it on my phone.
1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
After I made all those changes I did a hard restart of the phone and now all seems fine.
I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
Hope this helps other people.

Crypto provider priority reset after restart

We changed the crypto provider priority as mentioned in:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/9dd23e6b2c3d67e10000000a114084/frameset.htm
detail we lowered the iaik provider.
But after restarting the server the settings were reset to default. Is there a way to make the changes permanent ?

Holger the link you provided shows only the way to change the status at startup of some services. It does not show how to change the order in which the providers are loaded.
Sorry I can't be more specific about the SAP server, however if you look at the generic JCE pages on Sun's website they tell you following:
You should have somewhere on your path:
app/user/machine a file name java.security..
In that file you have entries like:
List of providers and their preference orders (see above):
security.provider.1=sun.security.provider.Sun
The number in security.provider.# will determine the order of preference in which the providers are loaded and possibly scanned.
If you want to force a specific provider's implementation of a security protocol you might just have to code for that by requesting it.
exemple Cipher.getInstance(protocol, provider)...
or Cipher.getInstance(protocol, "providername")...

Desktop reseting after restart

My desktop keeps on reseting after it restarts and my files i save on my computer keeps on scrambling and not being able to read it or open it. Any suggestions on how to fix this....beyond reloading my OS and everything on my computer?

It is already set to none as I'd like to put the folders where I want. But still, after restart the imac puts them all on the right side of the desktop. I'm getting tired to put them back where I want and the imac puts them back to the right

N80 Clock reset after restart, pls help

Since w while now, every time i restart my phone, i need to set my clock again.
Apparantly it resets after the phoone has bene switched off.
The battery is completly full, and i've installed the latest firmware.
Can anyone help me fix thix problem?

This has come up before. The best theory (well, I think it's the best - the fact it was mine is purely coincidental) is that the phone has a secondary battery for the clock, just like in a PC.
What this means is that the problem is hardware and to get it fixed I'm afraid you need to take the phone to a service centre.

Keyboard system preferences resetting after restart

Greetings,
I began with 2 similar problems. My menu bar and keyboard system preferences would reset after each startup. I fixed the former with https://discussions.apple.com/thread/6028346?tstart=0
Still, every time I restart or logout my keyboard system preferences reset to the default. These defaults interfere with the software I run- Logic & Pro Tools, so while not the worst thing to have to remember to reset them each time, it is a drag.
Any help will be appreciated
Thanks

The procedure below will reset the permissions of a user's home folder in OS X 10.7.4 or later, including 10.8 or later. If you're running an earlier version of 10.7, update to the latest version first. This procedure should not be used under OS X versions older than 10.7.4.
Back up all data before you begin.
Step 1
Click the Finder icon in the Dock. A Finder window will open.
Step 2
Press the following key combinations, in the order given:
Command-3
Shift-command-H
Command-I (the letter "I" as in "Info.")
The Info window of your home folder will open.
Step 3
Click the lock icon in the lower right corner and authenticate with the name and login password of an administrator on the system. If you have only one user account, you are the administrator.
Step 4
In the Sharing & Permissions section of the window, verify that you have "Read & Write" privileges. If not, use the "+" and "-" buttons in the lower left corner to make the necessary changes.
Step 5
By default, the groups "staff" and "everyone" have "Read Only" privileges. With those settings, the files at the top level of your home folder will be readable by other local users. You can change the privileges to "No Access" if you wish, but then your Public and Drop Box folders will be inaccessible to others. Most likely, you don't need to change these settings.
Step 6
If there are entries in the Sharing & Permissions list for users or groups other than "me," "staff," and "everyone," delete them.
Step 7
Click the gear icon at the bottom of the Info window and select Apply to enclosed items... from the drop-down menu. Confirm. The operation may take several minutes to complete. When it does, close the Info window.

MBP Retina Desktop Wallpaper resets after restart

Earlier this week I got my new MBP 15" Retina, and completed a clean installation of applications from my old MBP.
This morning I had to install and update and for the first time had to restart the computer. After restarting the origional wallpaper shows on login.
After login and going into Desktop & Screen Saver Settings it shows the proper desktop image.
Steps Completed:
1) Problem only occurs on Restart or Shut Down. A Log Off will maintain the correct wallpaper.
2) Tried changing to Standard Desktop Picture or an iPhoto gallery photo.
3) Unlocked '/Users/scottdavis/Library/Preferences/com.apple.desktop.plist' made wallpaper change (it changes date modified). Restart. Did not resolve.
4) Tested the same process on MBP 17" Early 2008, works correctly.
5) Running OSX 10.8.2 - completed MBP Update 2.0 (is where I had to restart)

Hi all,
I have had this same issue with OS X Lion and it continued on to OS X Mountain Lion as well. I have had the wallpaper switching on me to the default solid blue color whenever I restarted (every month or so) and when switching between users (every other day or so). So this issue was very frustrating having to go back in and reset the wallpaper to my preference whenever I switched to either user. I found a solution that has been working for me for several restarts and several switching of users now:
First, I took some of your advice by locating all of my wallpapers into a 'Wallpaper' folder located in each user's 'Documents' directory. I copied to same wallpapers to each user so both user's have the same wallpapers to choose from.
Then, I installed the latest stable version of 'OnyX' (freeware software). I used OnyX on both user accounts to run through practically all the settings to clean up the entire Mac (Mac Mini, mid 2011) including: Verify [S.M.A.R.T. Status, Structure of volume, and Preferences], Maintenance [Permissions], Cleaning [System cache, User cache, Internet cache, Fonts cache, Log cache, Misc. cache]. I generally left the default checked boxes alone and didn't change any settings and Executed the program to run as default.
After running OnyX, I re-set my wallpapers for each user and went ahead and tested the restarting of the computer and switching back and forth between users. It was very easy to duplicate the bug previously, but now I could not get the wallpaper to switch back to the default blue as before. Everything seems stable with my wallpaper selection now.
Hope this helps someone. Thanks everyone for your input too.
As a side note, my Mac is running much smoother and quicker now too. =)

Finder Resetting After Restart

Hello,
I recently restored my preferences folders, both on the Macintosh HD and my user account, from a Time Machine backup to solve a problem that I was having with my trackpad.
I am now finding that whenever I add any shortcuts to my finder sidebar they disappear after restarting my machine.
Has anyone else encountered this problem and successfully solved it?
Many thanks/

Hello again:
Confused!
Me too (no help to you). It is possible I do not understand what you are trying to do as I do not add things to the finder sidebar. Usually trashing a preference file corrects all sorts of things.
The reinstall (over your existing system) would, at least, almost eliminate software issues. An alternative would be to do a complete restore from a TM backup at a point in time where things were working the way you wanted.
Barry

IMac 20" (2006) display brightness down after restart

Hello, i'm having a strange issue with my 20" iMac in the sense that after each restart the screen brightness is pitched all the way down to it's lowest settings. It's not a major problem, but it's still quite annoying.
Anyone else has this? Does anyone have a solution?

My iMac does this every once in a while. Not really sure why.
There are screen brightness buttons on your keyboard. They are the F1 and F2 buttons and can be used to quickly adjust your brightness without opening System Prefs.

Mac System Settings Keep Resetting After Restart from Boot Camp

Not sure what to make of it but it's highly annoying. Most of the time when I restart my computer back into the Mac partition after I've been using Windows XP on BootCamp, most of my system settings are reset. The most obvious ones I run into are desktop background, Safari homepage, and the Spaces preferences, but there are others. Help. Thanks.

Did that reset, then rebooted into BootCamp, then restarted into the Mac. Settings appear OK, but I will try it a few more times over the next couple days to be sure. I thought it odd that it does it much of the time, but not all the time.... If it stays this way I'll post this as answered in a few days. If not, then I'll let you know that, too! Thanks guys!

Time Resets after restart

I recently installed 10.6.5 on a Mac Pro DESKTOP. After I restart, the time (clock) resets to an earlier time, just the hour not the date etc. I just changed the pram battery - same result (time changes).

I have since discovered that the TIME RESET happens ONLY AFTER rebooting from WINDOWS.
OSX assumes the hardware clock is set to UTC (GMT). Windows sets the hardware clock to local time, so, in most places, OSX will then boot with the wrong time. It is possible to set Windows to use UTC, but some applications may have problems with this.

Settings always reset after restart! Help please????????????????????????????????????????????????????????????????

Basically I bought an iMac last October, 21", 4GB standard manufactured settings ram etc. After a few weeks every time I quit an application and go back on it, it returns to its old settings. Whenever I remove a bookmark from the toolbar on Safari and restart it, it returns to the old settings, when ever I restart the computer the dock and background changes towards its original settings. This is starting to get really annoying, and I don't know what to do and I have installed all available updates. Is an issue like this covered in a warranty and do you guys have any ideas on what I should do?

Hi...
Try Resetting your Mac's PRAM and NVRAM
If that didn't help, since your Mac was purchasd last October, it must be running Lion v10.7 and it's still under the one year warranty.
Try using Lion Recovery to repair the startup disk or reinstall the Mac OS X.
If nothing above helped, take your Mac to an Apple store or Apple certified repair provider.
You can make a reservation at a Genius Bar in advance.

Dock reset after restart computer / desktop image cannot be changed

hi everybody!!
It is my first time in the discussion forum, so I hope I selected the right section to place my problem.
I have decided to give my old computer (Mac OS X 10.3) to a friend. I deleted the old administration account and created a new one with his name. After doing this, when I restart the computer the dock bar configuration is reset and I cannot change the image of the desktop. I change the configuration of the dock bar according to my preferences, shutdown the computer, start it again and the setting of the dock is lost again. Re the desktop image, it cannot be changed at all.
Advices are welcome,
Thanks

I'm not sure what's causing all this, but if you're giving the computer to somebody I would suggest erasing the hard drive then reinstalling the operating system. If you erase the hard drive with write zeros once you are taking better security measures for you in case somebody (either your friend or a future owner of the computer) decides to try to recover deleted files. It's also like doing a spring cleaning and ensuring that your friend receives the computer in the best condition possible. Of course it will also clear up the problem you are having.
Make sure you also give your friend the original discs that came with the computer as well as any discs for software (including system upgrades) that you re-install on the computer. This will make it easier for them to troubleshoot and to reinstall software should they need to at some stage, as well as being a legal requirement.

Screen brightness resets after every start up

Hi all, haven't been here in about a year. My imac's brightness has been resetting to the darkest point every time I shut down then subsequently start up (next day, whenever). I always had it set at it's highest point, which is what I preffered, and now I have to set it with the keyboard EVERYTIME! Not the end of the world but a little irritating. I don't know if it's related but also lately my normally smooth running imac has been hanging up on me with the spinning beach ball of death and I routinely have to initiate a "force quit" but don't have to actually force quit any app. for the imac to resume as normal. All I have to do is close the force quit window, wierd. 3rd party culprit?
Thanks guy's.
vanessa_b

Sounds strange.. Have you done the usual maintenance people around here suggest... repair permission.. clean caches? That's what I would do considering your other problems.
May want to try a Utility like this:
http://www.versiontracker.com/dyn/moreinfo/macosx/26516
Also, you may want to consider creating another account.. set that account to open upon boot... and see if the screen problem persists. If it doesn't, then it may be an issue with a preferences file...although I'm not sure screen brightness is controlled by a preferences file.. worth a shot though.

Brightness resets after restart

Similar Messages

Maybe you are looking for