Brightness screen very buggy

I have a brightness screen that is very buggy after 2.0 software, I reduce it to min all the way and sometimes when I put the passcode it stays bright as ****. Not going to the min of brightness.

Try turning off the auto brightness...
my brightness was very odd when that mode was turned on.
Anyone know what the behavior of turning this auto bright to on does? For example, does it sample the brightness once every 15 minutes? It just seems it doesn't respond accurately to changes in lighting.
... Altan

Similar Messages

  • Help - Screen brightness is very low

    Hello all,
    I am having problems with my touchsmart.  The screen brightness is very low and I can't see anything unless I have a flashlight.  The brightness is already at 100%.  A couple of things I noticed.  When my computer is in sleep mode and I move my mouse to get out of it, the screen will appear normally for a few seconds.  When I changed the screen resolution to 800x600 and click apply, the screen brightness will go back to normal for a few seconds and when I revert it back to 1600x900, it will go to normal again for a few seconds.  Here are my specs:
    HP Touchsmart 300-1025
    Processor:  AMD Athlon II X2 240e Processor 2.80 GHz
    System:  Windows 7 64-bit
    THanks for any help.
    Tim

    Hello tim1218:
                 Lets get you started with calibrating your display. Go to Help and Support click on it. Opens type in brightness will take you to: Adjust your monitors brightness and justment.  In secound sentance  at the end of it click after word (see) Click on Calibrate you display Next window will give direction follow them. If you are unable to get it resolved by running calibrations . Then I recommend that you take your computer in for service. I wrote this bold and large type for you to be able to read it on dark screen.

  • Captivate 2.0 Very Buggy After Import of SWF File (Flash 8)??

    Where should I begin...
    Issue 1
    I just updated to Cap 2 and started using it. I have come
    across a few very weird issues. Everyting works fine until I import
    a swf file to the stage. After I import a swf file to the stage I
    realize I made a mistake in the swf file. So I updated the swf in
    Flash 8 and publish it. I then went into Cap 2 and tried to update
    the file (which I noticed that the update button has been removed.)
    When I go to import and import the updated file, it does not update
    it. I had to close the program and reboot before it would recognize
    the new file??? Sounds like a caching issue of some sorts, but very
    buggy in my eyes.
    Issue 2
    So now I have the new file in... great! But when I try to use
    one of the drop down menus from the top tool bar, the menu
    disappears immeditly after I have clicked on it??? The only way to
    get my menu's back is to close the program and reopen it.
    Issue 3
    I just recently found another problem... I was trying to work
    with Cap 2 in its crazy state, and I pulled one of the bars on the
    timeline torwards the end of the screen and the timeline
    disappeard??? So I went to view and clicked timeline... no change.
    Now I do not have a timeline??? I have tried running a reapir and I
    even tried several different new projects with different swf files
    to see if it was just that file and I have the same results.
    Sorry so lengthly on my issues but this just sucks and I need
    help!! Anybody got any ideas!??
    Thank you!!

    Hi SaSQuaCh69247,
    Issue 1 :- Select the SWF file in library, right click, and
    select update.
    Issue 2 :- Actually it could be valid for Issue 1 also. It
    seems like SWF file you are trying to import, does some action
    like, importing another swf or connecting to server on the first
    frame itself. Captivate will try to play the first frame of SWF
    when you import them. Try creating a keyframe with the stop action
    as the first frame in your SWF, and see if you still have the
    issue.
    Issue 3 :- The approach I am mentioning over here is
    generally the last approach which I will take in such scenerios,
    but since you have already experimented a little, so try this.
    Go to C:\Documents and Settings\<user name>\Application
    Data\Adobe\Adobe Captivate
    Rename captivate_v20.dat as captivate_v20_org.dat.
    Restart Captivate Application.
    thanks

  • 9800 home screen went really dark and cannot change it back to bright screen

    it seems I have pressed something when my phone was in my pocket that caused my home screen with all my icons to go to a very dark screen
    the screen goes bright if I touch the "search" icon on the top right, but then I cannot access the apps
    if I touch the search function again the bright screen disappears and I have access to all the features on the phone
    I have tried "reset" in the options menu; I have tried adjusting the "backlight" function to no avail
    I used to be able to touch the notification bar across the top to access all emails and facebook but now it is hidden behind the search function bar
    help

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • In my macbook pro sees in the screen very wide a vertical black bar and it does not let see what this underneath that bar

    in my macbook pro sees in the screen very wide a vertical black bar and it does not let see what this underneath that bar

    Take it in for service. Your screen probably needs to be replaced.

  • I currently have a DROID RAZR M and I'm 1 year into my 2 year contract.  Since the Kitkat update, the phone won't stay charged and it's very buggy.  I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s

    I currently have a DROID RAZR M and I'm 1 year into my 2 year contract.  Since the Kitkat update, the phone won't stay charged and it's very buggy.  I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s and keep my same plan but switch to the Edge program. Is this possible? I don't think I should have to pay an early termination fee or anything like that since my phone has become almost unusable. I know under normal circumstances you have to wait 2 yrs to upgrade but due to the update and the poor service I'm now getting I hope Verizon can make an exception. Thank you.

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

  • I updated my verizon iphone 4 to 2.7 and now my phone will randomly shut off and is very "buggy". Is there any way I can downgrade to 2.6?

    Exactly as the title states. The 2.7 update is HORRIBLE and made my phone very buggy. I beleive I had the 2.0 or 2.1 software before this update and I was fine with that. Anyway to go back to the old software? If I restore to an earlier date then i'll lose all the new numbers ive added to my contacts since then

    Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
    (90452)

  • IPhoto (old-- version 8?) won't import photos from iPhone 5. Very buggy.

    I have an old version of iPhoto that is very buggy (we have an 06 iMac, to be replaced next month). Admittedly, when I've been prompted to rebuild the cache, I don't (what does that do, anyway?). Lately, my problems have been: 1) Certain photos from my iPhone 5 continually re-import even though I check "Don't import duplicates." 2) Most concerning, photos from the past three months on my iPhone won't import to iPhoto. I get an ominous error message after iPhoto takes about an hour to go through the import process. On occassion, random photos (1 or 2) will import. Sometimes an image from a video (but not the actual video). My photos are trapped on my phone, currently not backed up. I have 1000+ photos on my iPhone, as I am sentimental and paranoid and don't want to delete them. Also--our photos are on an external hard drive. We also use TimeMachine and back up on a remote server through a service. I could live with losing everything on my Mac...but not my photos. The over 10K photos are painstackingly organized by folder and albums. Help me!!!

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download IPhoto Library Manager 4 for OS XC 10.6.8 and iPhoto  8.1.2 and later  or iPhoto Library Manager 3 (for OS X 10.5.8 and iPhoto 7.1.5 and earlier) and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu (iPLM 3) or Library ➙ Rebuild Library menu (iPLM 4) option.
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • The big gray volume icon is flashing randomly on my screen VERY often. Annoying!!! Please help me, someone!

    Basically, after I installed Yosemite, the big gray volume icon (2" X 2" on a 23" screen) is flashing randomly on my screen VERY often. This is annoying. I have tried all peripherals including the possibility that there is dust/debris in my keyboard buttons. I disabled the keyboard and it still does it. Please help.

    delspacemark wrote:
    The sound card is a piece of junk. End of story.
    If you are correct there is nothing that can be done, I doubt that you are correct.
    Try asking instead of telling.
    Good luck

  • Retouch brush is very buggy

    hallo,
    are you aware that the new retouch brush in lr5 is very buggy, freezing, slow ?
    do you intend to improve it ?
    as an example of nice brushes, please look at capture NX2 or more recent ononesoftware retouch and clone brushes :
    http://www.ononesoftware.com/learn/training/video/using-the-clone-brush/
    http://www.ononesoftware.com/learn/training/video/perfect-layers-3-using-the-retouch-brush /
    by the way since lr4, the previous retouch brush for dust had a bug. if i wanted to use it to remove bigger unexpected elements (so click ten times to cover a zone), it was impossible to locate a new circle across (even few % overlap) a previous one to extend the retouching. sometimes locating away and moving it after worked
    best regards
    marc

    here are two images coming from a video2brain training showing new retouch brush cannot be used in many cases (here we try to remove electrical wires) with respect to nx2 retouch brush..; I really don't understand why adobe can provide such tools with respect to all the fantastic ones they have in PS. everybody now uses content aware brush and not clone tools :
    personnally, if i had this image i would try to make a small part of the wire expecting lr samples lose to the zone to remove and then start a new brush close to clouds,... perhaps four or five different brushes instead of one long drawing.
    best regards
    marc

  • Is fw2.2 very buggy or i´m wrong?

    Hello
    after reading many posts, it´s my feeling that the fw2.2 is very buggy.
    I´m still with 2.1 and so far so good. But i never read many errors about the 2.1 that i read about the fw2.2
    Nuno

    We haven't had any problems with either of our phones with the 2.2 update. Neither have our friends.

  • B210a Very Buggy

    I have many problems with B210a printer. I did recieve the registration email with the code to enter in the hp eprint app but when i tap the link or open the app seperately there is no option anywhere to complete the registration. Btw my airprinting worked when i first bought the printer but has had a mind of its own after a few months, so i am trying again but with no luck. I cannot find the printer anymoreon the same wifi network or even when i enter the exact ip address. Very very buggy printer, have updated all drivers still have troubleshooting icon in device manager and all the options on the printers touchscreen that i need to help me in all suggested troubleshooting processes dont work, time out, cant connect etc... Have to plug in Laptop everytime i want to print and even that has been buggy on occasion. Getting ready to 'Office Space' it...

    Interesting. Lots of issues here.
    #1 has been fixed a few times (for a few different cases/reasons). #2 seems to be fixed. #3 seems to be fixed. #4 seems to be fixed, but a few scenarios still exist that are "by design". The design is that you should only do one thing at a time, but your
    exact issue seems to be fixed. #5 seems to be fixed. #6 is interesting. That feature used to exist. It was removed because it was causing too much trouble and we moved to a better editor without the feature. Many web browsers now build that feature in, so
    it was out of scope/plan.
    Thanks!
    Ed Price (a.k.a User Ed), SQL Server Experience Program Manager (Blog,
    Twitter,
    Wiki)

  • Very Buggy Flash 10.2 - different Graphic Cards

    Hi...
    Flash Player 10.2 seems to be very "buggy".
    My system:
    Win Vista 32Bit Home Premium, all updates
    Firefox 3.6.13 with the actuall Flash 10.2...
    I have two GPUs (Hybrid)
    - onboard Intel Media Accelerator, Intel Mobile Family 4 --> Flash 10.2 do not work!!
    Some videos are showing only a black area or a not moving picture... mostly you can hear the sound.
    and an extra decidedly graphic card (GPU)
    -nVidia GeForce 9600M GT --> and there Flash 10.2 works!
    Now if have loaded and installed the old Flash 10.1, latest version.....
    ... and all works fine!
    So, now I will wait for an bug release.
    update:
    The problem is not more less with FF 3.6.15!
    ... and i have the same problem with IE8 on the same computer
    At first with 10.2.152.26 and now branch 10.2.152.32.... it's all the same

    Do you have the latest device drivers installed for your video card?
    Did you try to disable Hardware Acceleration?

  • ITunes very "buggy"

    For quite a while now my iTunes has been very buggy. I usually have it open in the background and when I first access it I inevitably click something one time and then get the spinning beach ball for 30 seconds. Also, when I am in a browser (usually Chrome, but sometimes Safari) iTunes doesn't come to the foreground when I click on it - I have to go down to the dock and click on the icon to bring the program forward. Its weird because I can still click on songs and podcasts, but the program doesn't come forward. I hoped that the recent upgrade to 10.2.1 would fix it, but it hasn't.
    Any suggestions?

    The second issue you mentioned is what I'm looking for help with. While on my phone I try to change the order of my playlist and I do t even have to press done before the songs will rearrange where the were previously.  I have tried rebooting my phone and nothing has worked.

  • E70 is very buggy

    I got me an E70 just few days ago. Though the phone otherwise is very nice, unfortunately the firmware of the phone seems to be still very, very buggy, I'm having a lot of problems with everything.
    The biggest problem is that somehow the phone seems to think that its memory is full when just one programme is running. For example if I'm running Nokia Business Center to read my company email, I can't read my sms's at the same time - the phone tells me that it has no free memory. However, at the same time according to the file manager just a small part of the memory is used. Running few programmes at the same time is very essential for my smartphone usage.
    It is also not unusual for the phone to completely crash in situations like this (and unfortunately not only then).
    This probably is a problem that can be fixed by a firmware upgrade, but no one seems to know if a firmware upgrade is on its way and when will it be available. Is there any information of when and whether these very serious problems will be fixed?

    I have to agree. My first use was fine. A spreadsheet with 10 rows and making a chart of it. But when I imported an excel spreadsheet with 3 years of step data (pedometer), 976 rows and trying to select 360 rows to make a yearly chart, Numbers went into crawl mode. Just updating the chart title the computer would capture one character per 30 or 40 seconds. When I selected a chart element it would take 20 to 40 seconds to select. I could not delete a chart series by selecting it and hitting the delete key. In short, it appears that making a few quick tables with just a few rows to support a presentation spreadsheet is ok, but trying to use Numbers to analyze any amount of data quickly becomes too time consuming to be practical.

Maybe you are looking for