Bring a 2008 iMac up to date?

Hi,
I have an iMac which I purchaed in 08. LOVE the computer and it's never even come close to letting me down. It still runs on the OS it came with as I've never updated it (stupid, I know) Is it possible to bring the machine right up to date with the latest Apple OS?
Any help greatly appreciated
Thanks!

No need for apologies!
The main thing is that you have got the information you needed!

Similar Messages

How do I transfer data from an old Powerbook G4 w/non working screen to my 2008 iMac. I want to save my photo collection.

I have an old G4 Powerbook that has suddenly lost it's screen. It just flickers at times. I want to get the iPhoto data with lots of pictures out of the G4 and onto my 2008 iMac. I have no idea how to network these two and it is complicated by the loss of screen on the laptop. I know the laptop is up and running after I TURN IT ON BECAUSE WHEN THE SCREEN DOES IT'S FLICKER ON AND OFF BIT I CAN SEE THE DESK TOP. HOWEVER, THESE FLICKERS ARE SO BRIEF I CANNOT PERFORM any TASKS (woops) on the laptop. Help???

I will post my experience just in case someone else has this problem. John was right about the Firewire cable being the 800 9 pin job for both my PB G4 (2003 version) and my iMac (2008 version). Even though there was no screen to look at on the PB I was able to get into the target disk mode by first hooking up the firewire cable to my iMac and then the PB, then, holding down the "T" key on the PB I started it up. The iMac was already up and running.
It took several seconds but eventually a target disc icon for my PB showed up on the desktop of my iMac. Double clicking on the icon let me have access to all that was in the PB.
Sort of and here is where it got dicey. My PB and iMac do not run the same OSX versions, the PB being pretty old. Additionaly the cause of my concern was my wife's photos stored in some obscure location on the PB and using an old version of iPhoto which did not mesh at all with my iMac version.
After a bit of poking about and trying different work arounds I got lucky and a info box poped up saying that the data needed to be upgraded to be read by my newer version of iPhoto. Long storey short I went down this path and got everything transfered to the iMac. Just not sure how I got on that path, but I did.

Early 2008 iMac (8,1) randomly goes into sleep mode

Hey,
My early 2008 iMac (8,1) on 10.8.2 goes into sleep mode by itself. I've played around in Energy Saver, tried resetting SMC, NVRAM, replaced HDD, reformatted HDD, installed smcFanControl, reinstalled Snow Leopard, Lion, Mountain Lion. None of that worked. Took it to the Genius bar, performed some diagnostics tests and they said everything worked properly. Does anybody have the same problem? I can still use the computer for general computer use (light web surfing and e-mailing), but it seems to go into sleep mode when I have a lot of applications open and especially when watching videos. I've tried researching this problem, but I've haven't found a definitive answer. Right now, the Genius that I've been talking to thinks it may be the RAM. I'm waiting on new shipments of test RAM to arrive at the Apple Store for him to properly diagnose.
Thanks,
Jason
iMac (8,1)
2.8 GHz Intel Core 2 Duo
2x2 GB 800 MHz DDR2 SDRAM
ATI Radeon HD 2600 Pro 256 MB
1TB 7200 RPM SATA ST1000DM003-1CH162
If you want to read the whole time line, I've included it here. I apologize for it being so long.
At first I was running Lion (10.7.5) and the computer would enter sleep mode whenever I was doing anything with video. For example, watching YouTube videos and chatting on FaceTime. And funny enough, I distinctly remember watching a bunch of movies with VLC and the computer did not go to sleep (Although, this is not true anymore). I could wake the computer up and use it, however within a few minutes the computer would re-enter sleep mode. The computer seemed fine and I could access all of my files. Tried resetting SMC and it did not resolve the issue.
I made a Genius appointment to see if they were familiar with the issue. The iMac passed the in-store diagnostics test; it said all the components were functioning properly. He told me to bring it home to do a fresh re-install of my OS and then run my computer to see if the problem persisted. I took it home and reformatted my HDD with a 35-pass erase, re-installed Snow Leopard (10.6.8) and declined to transfer any backups from Time Machine. I was using a fresh system and sure enough, the problem persited. Tried doing the same thing again but with Lion (10.7.5) and still no luck. So I made another appointment and it passed the in-store diagnostics test again. I let them keep the computer for a 24-hour diagnostics test. They told me they would diagnose my computer with the OS on my HDD as well as a copy of OS that the Apple store deemed 'good' on an external HDD. The Genius called me and told me that my HDD failed their 24-hour diagnostics test and recommended I replace it. I initially had a 750 GB HDD, and the Apple Store could only offer me a 500 GB HDD ($200). I opted to take my computer to Carbon Computing, an authorized dealer in Toronto, to have a 1 TB Seagate HDD ($170) installed with no OS on it. I brought it home, performed another 35-pass erase and installed Snow Leopard. Problem still persisted. Repeated with Lion, still unsuccessful. Looking back, I was so excited that I just had to replace the HDD to fix the problem, I forgot to ask the guy if he could recreate the issue.
I began to suspect that it was a heating issue. So I installed Temperature Monitor and smcFanControl, and cleaned the fans as much as I could without taking the computer apart. Without smcFC on I tried to recreate the problem and I noticed that the Power Supply Position 1 reached 95 degrees Celsius, and Graphics Processor Temperature Diode reached 97 degrees Celsius before entering sleep mode. I don't know much about temperature sensors and what they monitor specifically, and so I couldn't draw any conclusions from that data. I turned on smcFC and cranked the optical drive speed to 2000 RPM, HDD to 3000, and CPU to 3000. The computer still went to sleep but the temperatures were below 90 degrees Celsius before entering sleep mode. I've tried researching here and on the internet about normal operating temperature ranges of iMacs and generally found that most do reached that temperature but they do not go to sleep mode.
Then I thought it may be a problem with Lion so I upgraded to Mountain Lion. The issue still persisted. Tried resetting SMC and NVRAM, did not resolve issue.
I called the same Apple Store explaining to them that their recommendation of replacing the HDD did not resolve the issue. They told me to bring it in and have them check it out again. I went through the same process I did before; the iMac passed all of their diagnostic tests. The Genius told me this time he will test out the RAM. He called me and told me that he could replicate the problem and so he proceeded to put in a stick of 'good' Apple RAM, but the computer would not work. He said the 'good' Apple RAM was damaged, either before or in the process of putting it in. He plugged in my old stick of RAM and the computer worked. He tried to recreate the problem and claimed that the computer ran for over 24 hours with an existing movie on my HDD playing and it did not go to sleep mode. However, once I brought it home I played the same movie right away and it turned off 17 minutes into the movie. Tried resetting SMC and NVRAM again, ran the movie again, still went to sleep.
And that's the story for now...

Now to find out WHY it does it at home only. How hot is it at home? Have you checked the AC current/voltage at home?
Well they were able to replicate the issue at the Apple Store the second time I left my computer there. Anyway, we don't have any heating on at my house at the moment. It's usually from around 20-23 degrees Celsius (72-75 F). Temperature Monitor says ambient temperature is 30 degree C though...
I'm not really sure how to check the AC current/voltage at home, but my computer worked before I moved it. So I'm not sure if that is the issue.
I normally only have speakers set up to my computer and a wired keyboard. The speakers are powered separately. I would assume that at the Apple Store only the power cord and wired keyboard are connected.
What is the Power Supply Position? And what does it do?
Thanks for your help!

Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Maverick... is that possible? I read compatibility requirement of 10.6.8 or later...

Hi! Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Mavericks like I was advised in the Apple/Switch store... is that possible? I read compatibility requirement of 10.6.8 or later...???? Thanks for any guidance!

Before installation you should back up all your data.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

How to erase a early 2008 iMac Hard drive when the screen is dead

My early 2008 iMac's Graphics Module has died for the third and last time. I want to erase the Hard Drive before I offer it up for sale as parts or just re-cycling. But with the Graphics Module dead it will not boot up, therefore no display. So how do I erase my data and restore to a clean OS?

Make sure that your old Mac will boot into disk mode then buy this Thunderbolt to Firewire Adapter

What external DVD player plays commercial movies with a 2008 iMac?

What external DVD player plays commercial movies with a 2008 iMac?
I have a Samsung external player/writer but it will not play movies.
Only shows data in it's finder window!

Mr Pixel wrote:
What are the ones that did play commercial movies then?
Toshiba & LaCie.
I must have spent ten hours researching this.
What did the manufacturer tell you?
but even VLC wouldn't play it.
VLC plays anything you throw at it. At least 99.999999%. What type of file (suffix) is this movie file? Where did you get the movie from?
iMac 2008, OS 10.9.1
External Samsung DVD/CD writer player
You need to determine from the vendor if the player is compatible w/Maverick. Have you done this yet? If not, why not?

I'm on Firefox 3.6.8 running on a 2008 IMAC with OS 10.5.8 yet every click to move pages, from start-up, to return to Home Page takes minutes, not seconds! If I use Safari that's greatly faster on this same set-up. How do I get Firefox to be as fast ?

I'm on Firefox 3.6.8 running on a 2008 IMAC with OS 10.5.8 yet every click to move pages, from start-up, to return to Home Page takes minutes, not seconds! If I use Safari that's greatly faster on this same set-up. How do I get Firefox to be as fast ?
== Some time back, beggining with Firefox updates, at least three, or more updates ago.

Thanks for the tip. I took the following steps:
1) Backed up the existing profile (presumably corrupted somewhere);
2) Deleted the existing profile;
3) Moved the existing Firefox to the Trash and downloaded a fresh copy;
4) Started Firefox (thus allowing it to create its default profile)
5) Copied the following files from the backup copy of the previous profile: places.sqlite, key3.db, signons.sqlite, permissions.sqlite, persdict.dat, cert8.db ---
I'm posting this from a Firefox browser, so I guess I'm OK now.

I upgraded to Mavericks and my 2008 iMac is slower than slow.

I have a 2008 IMac with 2GB Ram and 320GB HD. I have been upgrading through out and up to Mountain Lion never had any issues with the new OS systems. I upgraded to Mavericks about 2 months ago and the system continues to get slower and slower to where I really do not want to use it any longer. I spoke to someone at apple and they said from all of the upgrades there are programs taking up overhead that no longer are needed. If I bring the computer in they can help resolve the issue. The Apple store is about an hour drive from where I live. Seems to me that there must be an easy fix. I am not that computer literater and switched from Windows to Apple because of the reputation. Now all I do is watch that colored pinwheel on my screen more than anything else. Does anyone have a simple suggestion or do I need to take it to Apple and have to pay them to fix what they have caused.

RAM is pretty cheap these days. It will depend on the exact model of iMac you have. Just for a rough idea I took a look here Computer memory upgrades for Apple iMac (Early 2008) Desktop/PC from Crucial.com and found a 2 x 2GB upgrade kit for $72.
Most of the sites that sell RAM have instructional videos you can watch so you can get an idea of how difficult the installation might be for you. I've installed RAM on my MacBook Pro and it was not very difficult, and the iMac installation looks easier than that. But that would depend on your own comfort level with doing it. I've done a lot of this sort of installation over the years on my Macs so I'm very comfortable. But you do have to be careful, as the innards of a Mac can be very sensitive to static electricity, and it is possible to damage components if you don't follow directions carefully. But I would see if there are software issues that can be addressed first before you go investing in more RAM.

I have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update?

i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.

If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

Bringing SSAS Source Control Up to date

Hi all
I've recently taken over managing an MI team who have a set of SSAS 2008 cubes deployed with a production and development server. We also have a TFS 2008 project which has the source for the cubes. However, the team have some bad work practices
such as updating code directly in production without updating source control or testing properly in development first.
I want to first bring TFS source control up to date with the latest code from live and wondered on best way to do this? I will then lock down who can alter code in production to enforce a better release process. Any help greatly appreciated!

Thank you David, the issue is we already have solutions in TFS but these are out of date as changes have been made to the AS databases outside of TFS directly on the server. I ideally want to check out the existing cube solutions and somehow update
them with the latest versions by pulling them in from the AS server databases, then lock down the release process.
Otherwise I guess I'll have to delete the solutions and start again using your method but I'd rather not lose what source control history we have.

Display crashed - 2008 iMac running Windows 7

Hi there,
I have a later 2008 iMac running Windows 7 on an Nvidia 8800gt. I've been using the Windows side only for playing games, and have been doing so for about a year now. Everything has worked fine until today running Far Cry 2. The display started to stutter, then froze up. I rebooted, and it did this again, eventually crashing out of Windows.
Long story short, when I turn the iMac on now the grey screen is covered in green pixelated lines, and it won't show anything else. Did I finally kill the graphics card, or do I have bigger issues?
Any help is greatly appreciated.

Hmm...looks like you've been bitten by the "weak NVIDIA chip die" issue that so far has not been confirmed in desktops.
During the NVIDIA chip scandal of 2006-2008, an investigation was launched (media source I can't recall) which found a fair number of GeForce 8/9 chips also fell to the same supplier's mistake that crippled countless notebooks.
The best you can do is to bring the unit over to your local Apple Authorized gurus (including Apple Stores) and have them check it out. You can tell them that you suspect a bad GPU. I'm not sure if you'll have to pay for it, though if you bought AppleCare, you'd still be covered today.
Nate

April 2008 iMac won't boot

When I try to start the iMac, it loads the apple icon, gets the spinning wheel and starts a progress bar at the bottom of the screen. After the progress bar get maybe 1/10th the iMac shuts down. I can get to the screen to load an external drive by holding down the option key, but it will not load or boot from an external drive. The Recovery drive is also of no use, it says no drives can be validated or repaired. Any suggestions are welcome. Also will not restore from Time Machine backups.

Sorry, should have included.
Only upgrade is more memory to 4GB.
Up to date on OS X.
Has Maverick installed.
Use only Apple productivity software (e.g. Pages / Numbers / Keynote).
On Comcast for internet (? Forced to, somewhat faster than DSL) via AirPort Extreme.
Hard wired keyboard
Bluetooth mouse
HP hard wired printer
Canon Bluetooth printer
   20-inch, Early 2008 iMac
   OS X 10.9.3
   2.4 GHz Intel Core 2 Duo
   4 GB 800 MHz DDR2 SDRAM
   AirPort Extreme

Can I update only from my iMac and have data flow to iPhone and MacBook, not the other direction?

New to iCloud and Lion. Can I update via iCloud only from my iMac and have data flow to my iPhone and my MacBook, not the other direction?

No. Syncing means bringing both ends to be the same.

How do I migrate from 2008 iMac to new iMac?

How do I migrate from a 2008 iMac to a new 2014 iMac?

You can use Migration Assistant to move your older iMac's data to your new iMac:
http://macs.about.com/od/OS-X-Yosemite/ss/OS-X-Yosemite-Migration-Assistant-Tran sfer-Your-Data-to-a-New-Mac.htm
Tom

Bring a 2008 iMac up to date?

Similar Messages

Maybe you are looking for