Bring back delets

does any one know if there is anyway to bring back what has been trashed and emptied is there any way?

Try one or more of these data recovery utilities:
Data Rescue II
FileSalvage
VirtualLab
All three come in demo versions that will show you what the full version could recover before you have to pay for anything.
All data recovery utilities require you to have an available storage device on which the recovered files can be stored, other than the drive from which they are being recovered. This is so the files you recover can't overwrite other files that you may also want to recover. It's an inflexible requirement; there's no way around it. A bootable external hard drive with plenty of free space on it is ideal.

Similar Messages

  • Bringing back deleted audio in a sequence

    I've always wondered about this question but have never thought to ask about it. Basically, if you have deleted audio from a video clip in a sequence, is there any way to bring that audio back - synced to the video clip - with a click of a button or do you need to go back to the original footage and find in and out points to bring it back? It would seem rather elementary to have an easier option but I've just never seen anything. Thanks.

    Put your play-head at the very start of your clip on the timeline and press F. This is the match frame function, and brings the master clip into the viewer window, including the IN and OUT points. You can then overwrite just the audio from the viewer back onto the timeline.
    Just make sure that the V1 track destination button is unlinked so that you write just the audio back onto the timeline, this will prevent you having to re-do any Motion or Filters on the video portion of the clip.

  • ICal and Adress Book sync brings back deleted stuff

    Hi everyone,
    I hope this wasn't posted yet, in any case I couldn't find it, so sorry for any double posts.
    I use my iPhone as my primary work device and perform all changes of Calendar and Contact data on it. When I sync it with my desktop Mac (PowerMac G4 that I use as backup device for pretty much everything) all the old contact details and calendar events that I deleted from the iPhone are synced back to it from the desktop Mac. I exclusively sync via iTunes.
    So what I want would be a one-way sync from my iPhone to the desktop Mac so iCal and Adress Book there are just as up to date as on the iPhone. Any suggestions?
    Thanks a bunch!

    Thanks, Allan.
    I am not sure if I will follow your advice, however. While you're probably right and it should be a true sync, what I was trying to say was that in my case (and apparently Berit's as well) it simply isn't.
    Which means that apart from the fact that we will probably have to clean out our adress books and calendars again after a reset and sync. I've done that three times already and believe me, it's a major pain. Plus, there is also a chance it won't work afterwards.
    I was actually hoping for there to be some workaround solution like a one-way sync. And I'm not happy with Apple's tendency to prevent such workarounds wherever they can. I understand they want to profit from their awesome products but wherever anything doesn't work they're starting to lose their user friendliness along the way. Which still, to me, is their selling point number one, notwithstanding the really great design.
    Honestly, I'm not sure what to do right now.
    But thanks again for your time. I'll keep posting what happens.
    Best,
    Martin

  • ISO5 update brings back deleted Calendar items - how do I remove them?

    Since the update to iSO5 all my deleted items in Calendar for the last year have come back so clearly they were only marked as deleted but as far as I can see there is no way for the user to have any control over this. Does anyone know otherwise?
    Having to remove all these items again one at a time is very annoying and I wonder what has gone wrong. More to the point am I going to have the same problem again next time there is an update.
    Does anyone know how to remove the offending items en-block?
    Mike

    I am having the same problem as well.  I think that it is related to the mobile ME or .Mac account.  All of my calendar entries were in .Mac calendar and they didn't transition to iCloud.  I would assume that mine are still in Time Machine, but I don't know how to move them over to iCloud.  Any suggestions?

  • How to 'bring back' deleted "25 Most Played" playlist...

    and the other playlists that come populated when iTunes is first installed, like "On the Go", "90's Music" ect. I deleted these playlists along time ago and would like to have them back.
    Thanks

    I've never really tested how the live updating works. I think it will do you're asking, but you may just have to try it and see.
    Not sure I understand the question about sync to and from. The actual sync of material is always one way, from iTunes to the iPod (or iPhone). But....with a dynamic playlist, when you next sync, the info regarding those tracks having been played should be included on the playcount info on the tracks, so that information will be given back to iTunes.
    iTunes shouldn't add multiple copies of a playlist or items in a playlist. If during a sync it looks like iTunes is re-adding items to your iPod, it's probably just a matter of information about the tracks being updated. Any thing you change on a track -- say you changed the Genre or something -- will cause the item to show up during your sync.
    Hope that helps.

  • How to bring back deleted music on ipod

    Help me out please. I synced my ipod and it erased all my other music before. is there a way to get them back ? Thank you

    Sync them again from your iTunes Library. They are in the Library?

  • I need help to find software to bring back deleted photos and texts, please?

    I synced my phone to my computer, and then my computer got wet... My syncs were not up to date (I know!) so I've lost tons of photos and texts. I know there is software that can help, but would appreciate a recommendation.
    Thanks!

    You've checked the purchase history on your account via your computer's iTunes (Store > View My Account), and you haven't got any auto-renewing subscriptions ? If you don't recognise the charges then contact iTunes support (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.

  • HT204150 one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?

    one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?

    Welcome to the Apple Community.
    The first thing you should do is have your friend log out of your account and change your password.
    Do you have a back up from when you had the contacts on your phone.

  • How to delete overwrite clip and bring back original material

    First project on any Premiere. Using Windows Premiere Pro CS6.
    I have a long (three minute) clip on Video 1 timeline I'll call "Original" with Audio on Audio 1. I'm Overwriting short video clips and placing these short clips onto Video 1.
    (I have to place them on Video 1 if I want to use video transitions, right? I'd rather place the short clips onto Video 2 so the Original video would stay underneath)
    Anyhow, I've got one of these short clips I want to delete from the Video 1 timeline and end up with the Original clip playing video and audio with no gaps in video or audio and no holes (causing a jump) in the Original clip.
    When I choose the Ripple Delete, the short overwrite video clip deletes, and the gap goes away. But I'm left with a jump cut and a "seam" at the cut point!
    What can I do to delete the short clip, and bring back the Original overwritten video so that it plays seamlessly with no gap and no jump just as it did before the overwrite?
    This is easy and it's just late, right?

    (I have to place them on Video 1 if I want to use video transitions, right? I'd rather place the short clips onto Video 2 so the Original video would stay underneath)
    If you'd rather put it on video track 2, go ahead, when you add a transition to- or from video2 (on the beginning or end of the desired clip on V2) it will transition to/from video 1.
    What can I do to delete the short clip, and bring back the Original overwritten video so that it plays seamlessly with no gap and no jump just as it did before the overwrite?
    exactly what Jon said.

  • HT1766 How can I bring back the information from an application that was mistakenly deleted?

    How can I bring back the information from an application that was mistakenly deleted?

    Only if you backed up the phone before that and did not back up after that. App settings and data are part of the backup. But all other data will be set back as well, you can't choose a single app to be restored from the backup.

  • How do I bring back the "Are you sure you want to delete this photo" dialog box in Iphoto.  I accidentally clicked "never ask again" so it never appears.  I want it back.

    How do I bring back the "Are you sure you want to delete this photo" dialog box in Iphoto.  I accidentally clicked "never ask again" so it never appears.  I want it back.

    The following previous discussion may help: Re: Delete Confirmation Warning.  I want back.

  • Is there a way to bring back the "Open a New Tab" option via right-clicking on the Tab?

    I just upgraded to latest version of Firefox (6.0). Yesterday it informed me that an upgrade to Firefox 5.(something) was available and asked if I wanted to upgrade. I went for it. However, I hadn't used it since then till today. Now when I opened it today it asked me if I wanted to upgrade to version 6.0. Without hesitation, I went for it too.
    While this version looks nice, it feels a bit odd to use it. Previously whenever I wanted to open a new Tab, I right-clicked on any of the Tabs (active tab or any other Tab) and after right-clicking, it had the option to '''''Open a New Tab''''' along with few other options. Now there's no such option. There's the + button to open a new tab, but what if I want to open a link in a new tab by right-clicking on it? Similarly the option to Open in New Window is also missing.
    Is there a way to bring back those previous Tab options/settings? If yes, how?
    P.S. In my bookmark toolbar, when I click on a bookmark icon, it has the same options/settings as it previously had in the last version I used (last version I used was 3.something; while I'd upgraded to version 5.something I hadn't used it except for opening the browser when it asked me to upgrade to version 6.0). Options on right clicking the bookmark icon are:
    Open
    Open in a New Tab
    Open in a New Window
    New Bookmark...
    New Folder...
    New Separator
    Cut
    Copy
    Paste
    Delete
    Properties
    I'd also like to mention here that I know of the shortcut keys; so please don't waste your time by trying to help me that way. Thanks.

    No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
    You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button.<br />
    You can drag a link on that new tab button to open that link in a new tab.<br />
    You can also drag the new tab button on another toolbar if you would like that better.<br />
    Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br />

  • Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

    Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

    Hello Noushin,
    It sounds like you are unable to see your contacts in the phone, but have confirmed they are still at http://www.icloud.com. I would next try these troubleshooting steps from the article named:
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    If you're using iOS 7, quit and restart the Contacts app on your iOS device:
    Press the Home button twice to see preview screens of the apps you have open.
    Find the Contacts preview screen and swipe it up and out of preview to quit the application.
    Tap the Home button to return to your Home screen.
    Wait a minute before reopening the Contacts app.
    Turn iCloud Contacts off and back on:
    Tap Settings > iCloud.
    Turn Contacts off. Choose to delete data only if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep Data.
    Wait a few minutes before turning Contacts back on.
    Restart your iOS device by holding down the Sleep/Wake button and then swiping the screen when prompted to power off. Then turn your device back on. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Acrobat 9 standard. The adobe inons on my desktop turned white, how can I bring back the normal pdf icons?

    Acrobat 9 standard. The adobe inons on my desktop turned white, how can I bring back the normal pdf icons?

    Please don't post the same question mutliple times!  I have deleted your duplicate post.
    Have you tried a System Restore to a time before the change occurred?

  • Please bring back the Modern Skype App for x86 devices

    The desktop Application is unusable on small tablets, due to its fiddly controls, missing features and extremely high demand of system resources (RAM, CPU, etc.). It's sad to see Microsoft once again neglecting its creations (like you did with Zune). Especially, when theres no logical reason for it (RT users can still use the app, you're just blocking us out - it's the same codebase!). People, let them hear your voice. I know, many others share my point of view, but they won't change anything if they don't see any complaints!

    Links for this topic:
    Regression in 6.3 - CREATOR and MASTER cannot edit or remove messages
    Skype Forum:
    I'm the MASTER of the group chat and I can't edit other people's messages who are USERS
    CREATOR in a group bug
    Please bring back the Delete and Editable feature for CREATOR in version 6.3
    Previous Skype version
    You can install the previous 6.2.0.106 version using this msi-installer:
    Downgrade to Skype version 6.2
    N.B. Don't forget to disable automatic updates !!!
    How to turn off automatic updates?
    In the menu go to: Tools > Options > Advanced > Automatic updates
    then click the button: Turn off automatic updates and Save.

Maybe you are looking for

  • How-To Display the Number of Records Returned from a List to the User?

    We currently are using lists to identify accounts that meet various criteria. Because the territories vary from 4k to 60k customers the users have stated that they don't know the size of the list and therefore don't know if they need to refine the li

  • SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

    Dear Sir., Am installing sap ECC 6.0 on windows 2008 clustering with db2. I got one error in the phase of Configure the database for mscs. The error is  DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND . DB2_INSTA

  • How to use weblogic.logging classes in 6.0

    Hi, We developed a number of logging classes under 5.1. One used weblogic.logging.LogOutputStream to write messages out to the log. This code no longer works under WLS 6.0. Everything compiles and runs but I don't see any of our messages in any of th

  • Site Collections

    I need some advice on SharePoint 2013 Search site collections best practices. After setting up my Search Service Application, I created an Enterprise Search center on my application (Central Admin) server. I then created an Enterprise Search Collecti

  • How to add new user status in Solman

    Hello, I wanted to add a new user status in Solman.i have added one new user status " reopen" . but when i checed it is showing as "no status". I have also checked the table TJ30T, in this table we have 2 entry for all other user status one is in eng