Bring back status/confirmation messages

Before, I would messages from my Arch installation when I would turn processes on or off or perform certain changes like chmod an entire directory to a different mode.
One example, if I was in /etc/rc.d/ and ran 'httpd -k stop' it would say that the service is stopping
Second example, if I perform 'chmod -Rf 775 demo_app' I would get an output of the directories that had their permissions modified as it changed them.
Now, I no longer receive these result/status messages and I am wondering if this is a system wide variable that I somehow switched off or changed by mistake.
If you have any ideas please let me know and thank you in advance
Last edited by sotu (2012-01-17 03:43:04)

sotu wrote:Second example, if I perform 'chmod -Rf 775 demo_app' I would get an output of the directories that had their permissions modified as it changed them.
chmod never did that without using the -v flag...

Similar Messages

How to bring back status bar when opening Excel doc mail attachment?

I have an iPad updated to 6.1.3. When I open up an Excel document from mail it opens the attachment fine and the status bar across the top with the 'Done' option to close the doc appears then disappears altogether after a few seconds giving you full screen access to the file. No problem there, but bringing it back to be able to close the document is tricky. Tapping along the top works only sometimes....I haven't been able to find a consistent way to bring it back to close the document. I can slide down across the top to bring up the notification center but tapping across the top to bring the bar back to close the file will only work after playing around with it for about 20 touches or so. Is there a trick to this or a way to keep the status bar there? Thanks in advance!!

Then quit the mail app completely and reboot your iPad, then try again. What we are describing is the way that it is done. Your mail app might be just acting a little hinky now.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I would like to know if it's possible to bring back the status bar in Firefox 4 without having to install any addons.

Does anybody know how to bring back the status bar in Firefox 4 without having to install any addons? The reason why I ask is that for some reason, when Firefox 4 was made available to the general public to download, Firefox 4 was missing the status bar and also the save and quit message was turned off by default. I got the save and quit message turned back on but I just don't know if it's possible to bring back the status bar without any addons.

Please read this article:
http://support.mozilla.com/en-US/kb/what-happened-status-bar

When do you intend to bring back the via iphone status for facebook?

when do you intend to bring back the via iphone status for facebook? it's been a couple of months now so pls fix this.

"We" don't. This is a user to user forum, and is not directly monitored by Apple. You can leave feedback for Apple at http://www.apple.com/feedback/

How to bring back the messages overview?

Since I made the last update for Mavericks I can't see the conversations overview anymore. this is how it looks like:
and it should look like this:
How can I bring back this overview? on my airbook I made the update as well and there it looks fine.
thanks for the help!

Hi,
The windowing info should be held in com.apple.ichat.plist
In the Finder > Go Menu hold down the ALT key and select the Library that appears.
Navigate to the Preferences folder
Find com.apple.ichat.plist and drag it to the Trash (will delete it)
Restart Messages.
10:00 pm Sunday; November 3, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Any chance you are bringing back the Status Bar?

Any chance you are bringing back the Status Bar, because all updates past FF28 don't have the Status Bar which is where most of my favorite Addons are located (such as eQuake Alert and ForecastFox. This is really annoying. I've had to turn off auto update because of this and stay with FF28. I'm sure one day FF28 will become obsolete and then I won't be able to use my Addons.

'''''"Any chance you are bringing back the Status Bar?"'''''
Little to no chance of that happening. As you are well aware, there is one or more extensions that restore the Add-on Bar to Firefox 29 + versions.

Jdbc adapter error on confirmation message in message monitor (rwb)

I have the scenario iDoc -> PI 7 - > jdbc (AS400 odbc driver).
When I do INSERT statements, the data is stored in the Database and the RWB message monitoring shows status Successfull.
However, for every insert, an other message shows up in the message monitoring with reversed Sender and Receiver (so it looks like a confirmation message is trying to find its way back to XI). This message first is is Status "Waiting", and after some time gets in Status "System Error".
As I am not expecting any responses in my XI configuration (as I have no place to send them to), I want to stop these messages showing up in the Adapter Engine (as there will be many Error Status messages that are of no interest to me).
How can I stop these messages, or what should I do in XI to process them (and dump them in my receiver determination). I have NO BPM involved .

Hi,
For each open connection a entry is made j2ee stack.So when the it reaches to max and execption is thrown.
In Jdbc adapter configuration -> advance mode -> Set -> Disconnect from the database after processing each message.
Should solve the prob
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Bring back Visual Basic 6.0 ! We all need it.

Please reconsider introducing VB6 to the market. It is needed by many.

Hi Reed,
Thanks for your two posts. Let me try to reply.
Discussion or Argument ?
You say "these forums are for discussions not arguments", and suggest that I want an "argument" or I am "trolling".
Yes they are for discussions and no it isn't the case that I want an argument (or that I am trolling). I am trying to have a reasoned discussion following the opening poster's genuine request to "Please reconsider introducing VB6 to the market. It is needed
by many."
I don't consider you treated him fairly. You have some sort of administrative status on this forum, implicit in that is that you should treat all posters equally and fairly. Yet your first post was "Bring back Windows 3.11, we need it. ......VB6 should
be retired and forgotten." That post alone was unfair to the OP and it set the tone for other posts that followed.
In other posts you refer to "VB6 zealots" but never criticize those who oppose the return of VB6 even when they accuse posters of being someone else. (I'm not making a plea for more banning and more censorship, I'm asking that everyone be treated
equally).
You also say "At the end of the day it is a fool's errand to argue with fools, so there's little sense to continuing the 'discussion'". Hardly fair and equal treatment, and certainly not an encouragement of discussion rather than argument.
You also state "If this thread were meant to take itself seriously, it would have a title which was not so obviously false, and it would contain some content with a reasonable argument." Again, the opening post was clearly a genuine call. You may
not agree with it but that is no reason to call it 'obviously false'.
Also the opening post doesn't even refer to VB.NET, it certainly doesn't suggest that VB6 should replace VB.NET - it is others who bring VB.NET into the argument. (And yet you move it to 'Off-topic posts' on the grounds it is not VB.Net related).
Let me state I am putting this forward as my genuine opinion of your actions, I am not attempting to 'troll', 'flame' or to attack you personally.
Valid arguments for VB6
You say Cor has clearly demonstrated there are no valid arguments for keeping VB6 around. Not so.
First of all the OP says "it is needed by many". Why should your and Cor's opinion be any more important than the OP's ?
Here are some reasons it is needed (I limit myself to just 5 otherwise this post will be huge):
1) VB6 is still widely used. According to the TIOBE index it is the #7 most popular programming language - an amazing feat for a language last updated 16 years ago. Particularly as Microsoft (& others) have spent 12 years trying to kill
it off. You may not like it, but there it is.
2) There are still a huge number of legacy VB6 applications in use, especially in corporates and government. Microsoft have (to their credit) recognized this and offer "it just works" support for the VB6 runtime until at least 2023 (soon to be extended).
But this support is for the runtime, not the IDE.
Microsoft effectively offer 2 options for these VB6 applications
a) If no modifications are required, continue running the VB6 application (presumably Cor disagrees with Microsoft).
b) If modifications are needed, migrate to VB.NET.
But in real life the most likely scenario is that the VB6 application will require a minor modification.
So what do you do ? According to Microsoft you migrate. But if the modification is just to change (for example) some text on a form that would be nonsense. I saw a suggestion a while ago that it cost $1 for every 3 lines of code migrated. So
a medium sized VB6 application could cost say $20,000 to migrate. Clearly that is not an acceptable cost for the minor modification I suggested. (Don't get hung up on actual cost figures, I am just pointing out there are potentially significant
costs involved).
The obvious answer for this scenario is to use VB6 (at a cost of say $20 not $20,000). Yet Microsoft don't offer this, stating that the VB6 IDE is not supported on Windows 7 or 8.
Does anyone disagree that doing minor modifications in VB6 is the only acceptable solution in this scenario? Or are some going to suggest it is better to spend $20,000 than $20 ?
Microsoft have painted themselves into a bit of a corner here, stating that they support unmodified VB6 applications until 2023, but you can't (theoretically) modify them.
For completeness on this point I'll cover some other typical scenarios too:-
One is that the VB6 program needs to become a web application - effectively this is then a re-write not a migrate, so you can decide what language is best to use. It may be, for example, that JavaScript/HTML5 is the way to go. (I've followed this route myself
for some old VB6 apps).
Another is that the VB6 application needs a mobile version. A few years ago that may have been VB.NET for Windows Mobile. (I've done that myself too, great for Windows CE/Windows Mobile 6.x). But doing this today you are really looking at iPhone,iPad
and Android - again you can choose the best approach (native or web app ?) and language.
The final scenario I'll mention is the one Microsoft do cover - migrate your desktop VB6 app to desktop VB.NET. I can't think of any occasion in the last few years where I have found a genuine need to do this. I have certainly seen cases where
IT (or whoever) have decided that VB6 apps must be migrated because VB6 is 'obsolete' (I guess a view not too dissimilar from many in this forum). I've even done a few of these myself (though I had the sense to only do smaller migrations, not wanting
to tie myself up with large scale migrations). I don't think of any of these new applications (done by myself or others) were any better than the ones they replaced, but at least the customers were happy (and paid well).
3) VB6 is the same language as VBA. VBA is a current, Microsoft supported language. It is in Microsoft's flagship product Office 2013. And it is the same language as VB6. You can cut and paste code between VB6 and VBA (and vice-versa). It is the same
language.
Both VB6 and VBA use the Visual Basic Runtime Library. In fact it is more than that, VB6 actually uses VBA to define it's language. In effect the VB6 IDE is a host for VBA in the same way that Word or Excel are hosts.
It is strange that Microsoft support (and sell and extend) the language when it is named VBA but not when it is named VB6.
Microsoft say VBA will be supported for the foreseeable future stating "This means that if you have an existing VBA project that you are satisfied with, you can be confident your investment is safe". Where is the logic in having this for VBA but not VB6
They assure you your VBA investment is safe but won't give the same assurance for your VB6 investment.
(OK, for the more pedantic posters VB6 is the same as VBA6. VBA7 is the latest release and includes a handful of modifications to support 64 bit Windows. Prior to VBA7 the languages were kept identical, it is these same modifications that many
of us now would like to have incorporated into an updated VB6).
4) A suggestion to bring back an improved version of VB6 is the fifth most popular (out of almost 8,000) on the Visual Studio UserVoice site. Vote
for VB6
5) Microsoft's program manager for Visual Studio stated (Channel 9) "It isn't cost effective to keep rewriting code to get back to functional equivalence". Quite so. So why re-write existing VB6 applications ? (Again, Cor presumably disagrees).
General Points
You mention LightSwitch and SmallBasic. A good point. But I'm sure you know neither support VB6 code so it doesn't address the concerns of the OP. But it is nice to see that you aren't opposed to all languages that aren't called 'VB.NET'.
So why the opposition to an updated VB6 ? If you prefer, it could be named LightSwitch 6.1 rather than VB6.1 ? Or maybe SmallBasic 7.0 ? Or if you see VB6 as a threat to VB.NET you could name it VB Junior. As long as it can open and compile VB6
code that's fine by me. Incidentally, there is certainly no call for VB6.1 to be part of "the .Net family".
You say "you want these hard working people to DO MORE WORK so that you can continue to generate income from your ancient endeavors." I'm not sure I see your point here. How is asking for Microsoft to bring back VB6 (together with the modifications
they have already done for VBA7) doing that? I suspect Microsoft could do this for a fraction of the money they have wasted on LightSwitch or SmallBasic. And if it is going to be more work than Microsoft can handle (as if) they should open source
VB6.
You mention that your 8 year old website is 'crap'. Well, that's what happens with websites. But the analogy doesn't really hold for a typical VB6 desktop program. A desktop CRUD program written in VB.NET doesn't really look (or behave) any different
to the same program in VB6.
You ask what I will be doing in 5 years when nobody uses PCs anymore ? Well who knows what the future will bring, but it is likely to be VB6 for those (mainly corporate) users still using desktops and laptops or Windows tablets, JavaScript for
Web apps - including iOS and Android - (I note Microsoft are recommending JavaScript/HTML5), and something (maybe Basic4Android ?) for native Android apps if Android phones and tablets become more acceptable for corporate users. I'll probably
also be migrating my VB.NET apps to JavaScript too.
As things stand, Microsoft have sent a clear message: 'If you are planning to make a substantial investment in developing your software, if your application is mission-critical, if you expect to use it for years to come - don't use Microsoft languages.'
Have Microsoft learnt from this ? The killing of Silverlight would suggest not.

Branding the confirmation message after Self Registration in OIM

Hi All
Can you please let me know how can I brand (change) the confirmation message I am getting after the user having the Self registration .
I want to change the following message
Congratulations, testuser
Your registration request has been sent.
Your registration tracking request number is: 38
You can use this tracking number to check the status of your registration in the Track Request section.
Registration Summary:
Name: testuser
Email Address: [email protected]
User Login: testuser
Thanks

Change the two line in two file Agent.properties & Agent_en.properties on each node if it is cluster.
find these wo line and change.
Note[REGISTRATION_REQUEST_SUCCESS].text = Your registration request has been sent. Your registration tracking request number is: {0}
 
Note[REGISTRATION_CONFIRMATION_TEXT].text = Congratulations, {0} Your registration request has been sent. Your registration tracking request number is: {1} You can use this tracking number to check the status of your registration in the Track Request section. Registration Summary: 
Take a back up of oim.ear. Also you have to know packing and unpacking of jar and war
These file you can find under
$OIM_ORACLE_HOME/server/apps/oim.ear/iam-consoles-faces.war/WEB-INF/lib/OIMUI.jar//oracle/iam/selfservice/uself/agentry/resources/
Restart your OIM manage server.
HTH.

Absolutely the WORST customer service!!! Customer disservice is more Absolutely the WORST customer service!!! Customer disservice is more appropriate! Bring back support to the U.S.!! Bring back support to the U.S.!

Absolutely the WORST customer service!!! Customer disservice is more appropriate! Bring back support to the U.S.!

Hi richmc. I will only deal with the last part of your message.
You say that you want to use Outlook 2007 to collect your mail. That is not a problem, it is just an email client. BT do not supply this email client. Microsoft do.
You cannot expect BT to be able to assist customers with all the different email clients available to use. You can get the server details etc to set it up yourself.
Most ISP's are the same on support issues for things that they do not supply.
BT do have a paid support service if you did want to use it but for things like email setup it should not be needed.
You also say that you have your own domain names. These NEED to be hosted somewhere to be able to use them for email.
I don't believe that BT do hosting anymore(Could be wrong). So you would need to get in touch with a hosting company, someone like Nethosting, 1&1, GoDaddy etc to set up an email hosting account and then set up your email client to your hosting companies email servers.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Syncing a moved folder is not bringing back all the photos to Lightroom

I have moved and renamed a folder in the external harddrive. Syncing that moved folder in lightroom is not working in bringing back all the photos to Lightroom - Although all the photos exist in that folder as I have confirmed through windows explorer.
Another Option: If I choose "import photos to this folder option" in LR and browse to the source to that folder - the missing photos are shown as shaded back and the import button (bottom right corner) is not highlighted. Therefore I cannot select these missing photos and hence cannot import them to the folder.
PLEASE ADVISE!

In the Folders Panel, the original folder should be listed with a "?" mark, because Lightroom can no longer find it. Right-click on it, select "Find Missing Folder", then browse to and select the renamed folder in its new location.
Note....these type of problems will continue to happen if you continue to rename and/or move folders or files outside of Lightroom. Do it using Lightroom and no such problems will arise.

Issue with page processing - confirmation message & show /hide a button..

Hello,
I am working on a to do list application.
I have events and for each event, I show list of tasks (grouped in reports based on the calculated task's status).
In one region I have a drop down list of events and a Select Event button.
For each task, I had to create a CLOSE option (initially I used a link, but the requester wanted a confirmation before closing the task).
Now I have a checkbox for each task (generated dynamically with apex_item.checkbox(1,task_id)).
Closing a task in my application means to set the end_date to sysdate.
I followed the instructions from
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/check_box.htm#CEGEFFBD. I've created also a button and a process and updated the sql from "delete" to "update".
The process is set: OnSubmit - After Computations and Validations; Run Process Once per page visit (default).
The issue number 1 is that I see the confirmation message (that tasks have been closed) every time I reload the page (the same when I click Select_event button).. not only after I press on that Close_task button..
For issue number 2, I have to mention that I've added a condition to show / hide the Close_task button, only if I have at least 1 task in the report.
The issue number 2 is that I see the button only if I click 2 times on the Select_Event button.. The same is for hide.
I feel like I am missing something very important about how to synchronize different events(buttons clicks), processes..
help..?
Thank you!
Anca

This forum is magic..
As soon as write here, I find the answer!
Issue 1: I fixed it by specifying this: When Button Pressed (Process After Submit When this Button is Pressed) and my button. I miseed this 1st time.
Issue 2: I moved the button after the report.. and now it's working just fine!
I did this about it for some time before asking the question here.. but I just had to write here and got the right answer ;)
Have a nice day!
Anca

Bring back iTunes syncing feature back!

I don't mean to be the stickler, but I cannot believe Apple decided to force us to use iCloud for syncing contacts. If i had known that upgrading to Maverick would have caused such, I would never have done so. I have a lot of personal and sensitive information on my iPhone. I don't want such information to be stored at any cloud platform. In fact, I prefer iPhone over Android phones for this feature (allowing users to decide whther they will use syncing via iTunes versus via iCloud). Now that feature is gone, I am in need of retracting back to the previou version of iTunes or Mountain Lion OS. Otherwise, I will need to start looking into if Android platform allows such. I want choices especially when sensitivie information is involved. How often do we hear about someone hacking into some corporate data hub? I don't want to risk.
Please bring back the feature to sync via iTunes!

Mike,
First of all, I am grateful for the message you posted. At least you cared enough to provide your input.
Secondly, I am not so concerned about losing data. Because, such data reside in my macbook pro, my ipad, my iphone, and my backup of the macbook pro hard drive. So, I am okay in that front.
As far as someone taking my devices, they are password protected with non-simple (not just 4 digits standard setting) password along with features such as "Erase Data" turned on for so many failed attempts.
Given, such I have to stand by my first request to Apple if they would reconsider giving back the feature. For my peace of mind...
Thanks again for your input.

To Be delivered status in Message monitoring

Hi,
There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
any input reg. this will be appreciated.
I didn't see any messages with TO BE delivered status in adapater engine.
I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
I have seen this thread & link also.
To Be Delivered
Re: "To be delivered" status in RWB -- Any solution?
http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
I could not see any entry in SMQ1, SMQ2, SM58 also
Thanks
Praba
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

Hi,
You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
Hope it will helps you
Cheers
Veera

Please bring back an option to Add Scroll Arrows!?

Mac OS X v10.7 Lion - has removed scrollbars and changed the direction of scrolling to better align with iphones, ipads, etc. Thankfully, there are options to go back to behavior similar to classic scrolling behavior, with one important exception. Unfortunately, scroll arrows are now completely gone. OUCH !
Through preferences one can make scrollbars be presented. Behavior can be based on the type of device being used, or scrollbars can be displayed all the time. I choose to display scrollbars all the time.
Through preferences one can make the scrolling direction go back to what one expects if one used Mac OS X versions prior to 10.7 Lion. When I'm scrolling content on my MacBook Pro, I'm either using devices that are not "embedded" in the display (the trackpad or the mouse). When others do scrolling say on an iPad, where the scrolling is directly on the screen, I get it that the direction is different. But don't change up and down so it will match a phone or tablet when I'm on a device where I'm doing indirect manipulation of window content.
To the core complaint... Scroll Arrows are Gone: I cannot get scroll arrows any more. Take a look at Mail or Safari. This is especially needed in Mail. I get lots of mail. I want to be able to scroll up and down by pages (yes there is another preference for this) using the scroll region. I can do that. But I also want to be able to scroll the window (say preview window, or mail message content window) by one line at a time. However, there is no option that I can find. Maybe I want to see the whole paragraph at the same time. Maybe I want to see a code fragment of 5-10 lines all at one time.
Some might say we should just use the up and down keys on the keyboard. I would like to do that. However, with Mail, Apple still has not provided the ability to move from message to message in the preview pane without MARKING THE MESSAGE AS READ ! Most email messages (like this one :-) are too long at least for quick browsing. When I use the up/down arrow to go from message 42 to message 49, then 42 thru 49 are marked as read, even though I can do this in a second or so with seven down-arrow presses. Certainly I can't read 7 real-life emails in a second. See below for a post two years ago requesting this feature which many Mail programs have, but which has never been added to Mac's Mail app:
    https://discussions.apple.com/thread/1988930?start=15&tstart=0
    Marking "Read" When Viewing in Preview Pane
    ...Similar discussions occurred on 10.4, 10.5, and 10.6. Here we are on 10.7, but this request has been ignored...
Please bring back some method for turning on scroll arrows again! And yes, give the option for controlling whether they're stacked at bottom of scroll region, or for using the more common model of up arrow at top of region and down arrow at bottom.
Sadly, this is also a core behavior of Mac OS X 10.7. I have Chrome installed. It does not allow scroll arrows either.
So, Apple... Accept that you went too far. Bring back options to turn on scroll arrows.
...and go back and review that mail preview behavior too, while you're at it.
Thanks,
Alan Carwile

Alan,
while the two finger scrolling is a sometime substitute for scroll arrows it is completely inadequate as a full time solution. It is useless in programs like excel that can have multiple split screens and only scrolls in one at at time and there is no reliable way that doesn't affect other operations to tell the program what screen you want to scroll in. With scroll arrows I got arrows for each window when I split the screen. It is typical of apple's (and steve jobs) hubris that they would eliminate these. It's fine if you think it is more sleek efficient use of the screen not to have scroll bars, but why recognize the need for scroll bars and allow us to turn them on and not scroll arrows?.
Forgetting the split screen problem, on the large databases I have with 10s of thousands of records anything other than scroll arrows is unpredictable because the scrolling speed is dictated by the size of the database and the sideways scrolling with the track pad is clumsy.
The lack of compatability in Lion whether with programs or user interface speaks poorly of Apple and it is the first time in a long time I've thought I might be headed back to the dark side.
And I think they do this on purpose, to make people bend to their paradigm -- see Job's refusal for the longest time to let keyboards connect to the iphone.
And, I know I'm not speaking to apple here, I'm speaking to Apple users. Apple doesn't seem to care or think it can do any wrong and has had that attitude for a long time.
brian

Bring back status/confirmation messages

Similar Messages

Maybe you are looking for