Bring up the disk utility with new hard drive

My hard drive died, completely dead! I have a Macbook Pro 15" i core 5 and I just installed a new drive. I have my macbook backed up to a WD My Book Live. Is there a command option that i can use to tell my macbook to load from a back up? I also have a Snow Leopard CD i bought recently but it won't boot from that. It looks like it does, it shows on the start up screen when i press the option key but i selected it, nothing really happened. I just heard it spinning for a little bit.
Can anybody help????
Thanks.

If you created a Time Machine backup from Mac OS X 10.8 or newer, connect the drive containing it and restart the computer with the Option key held down.
If you created a bootable clone of any Mac OS X version, connect the drive containing it and restart the computer with the Option key held down.
If you can't boot the computer from the backup, you'll need to use a Mac OS X install DVD or Apple's Internet Recovery system(on eligible Macs, press the Option, Command, and R keys at startup) to restore it, and if needed, install an OS.
(114129)

Similar Messages

3rd gen iPod will not complete the RESTORE process with new Hard Drive

I have an 3rd gen iPod and I have replaced the hard drive with a newer MK2006GAL. The drive formats fine with a USB cable, formating Mac OS Extended Journaled. It will not complete a "restore" when connected via FireWire in iTunes or with any ipod updater utility. this happens on any mac (we have several). It will not even see the iPod updater when connected via USB and it says MUST CONNECT WITH A FIREWIRE CABLE. It will not format with Disk Utility when connected with the Apple FireWire cable only USB. This is the second new hard drive I have tried. I thought the first "replacement drive" was bad. Turns out it must be something else. Does this sound like a bad battery or motherboard or bad FireWire cable to you? The connectors look fine (under magnification). other problems, while this iPod will not Restore properly, it also will not turn off.
Would like to know if anyone else has seen this trouble.
thanks.
Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod Mac OS X (10.3.9)
Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod Mac OS X (10.3.9)
Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod Mac OS X (10.3.9)

Hmm now getting this message.
"The ipod "ipod" could not be restored.An Unknown Error occured (1429)".
It still will not format. Does anyone know what a 1429 error is?
Powermac G4 1.25 MDD, OS9/OSX Mac OS X (10.3.9)

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

How do I get the os on a new hard drive?

optical drive doesn't work, hard drive crashed. how do I get the os on a new hard drive?

You can connect an external optical drive.
You can use another Mac with a good optical drive together with a Firewire cable if both computers have Firewire ports.
You can have someone clone the installer DVD to an 8 GB USB flash drive.
You can take it to an Apple retailer and see if they will install for you.

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Disk utility reports failing hard drive with error code STF/8/3:2 ATA BUS 0

My imac G5 (running Tiger) suddenly decided not to boot past the grey apple screen with the spinning wheel. I ran the disk utility and received error code STF/8/3:2 ATA BUS 0 MASTER on the mass storage test. I tried to run repair and only received a message "fatal hard drive error etc... back up, recover asap... I could not access the disk so I connected my new MacBook Pro by firewire in target disk mode. My HD shows up however, "nothing" shows up under when my "user" file. All I care about saving is my iphoto library. Everything else is trivial. Can someone Please help me? Is there any way I will be able to save this file?
Message was edited by: Elizabeth Burson

Welcome to Discussions - you can try DiskWarrior and see if it can retrieve some of your data. You can also take it in to Apple with an external fire wire drive you have purchased elsewhere (cheaper) and see if they can transfer the data. You can then install the external into your computer.

Restoring a home folder backed up using the Backup application (with the umbrella) to a new hard drive running Snow Leopard

I was running OS X 10.4 Tiger on a 2006 iMac. My home folder is backed up on a My Passport 500GB USB external drive using Backup (the original application that came pre-installed with the orange umbrella symbol).
I was intending to upgrade tp Snow Leopard so that I could sync a new iPad with iTunes and iPhoto so had ordered the disc from Apple and was waiting for it to arrive.
2 weeks ago my hard drive stopped - and I took the iMac to a support store (I am currently in Belgium and there is no Apple store here). They confirmed the hard drive was dead and as I had my receipt for Snow Leopard installed this for me.
Now I am trying to restore my home folder but the new OS does not recognise the data. I can see there is nearly 200GB of data on the external drive - but the folders contain small files call backup.log, backup.log.gz, InfoPlist.stringscat, stat0..... all under 5MB.
Applecare told me they did not know about the Backup application and it was not theirs..... then suggested I tried migration assistant.
With migration assistant, I just get a spinning wheel at the initial 'select your disk' page - spinning now for more than 8 hours. I checked on line and the only advice I saw was to use firewire - but my external drive works with the new high speed USB...
Can anyone help?

Thank you for your help - I now have a solution ...in case it helps someone else.....
...I also think I may have been a bit silly...
The solution - thanks to a great guy in Apple Support USA - thank you Matt!!
first I partitioned my hard drive using disk utility - and set 235GB for a separate install - I called it Tiger install disk
this allows your hard drive to act as 2 totally separate systems (by holding down the option key when you start the computer you can choose which you want)
then I reinstalled Tiger from my original discs onto the new part of my hard drive
then I read my backed up home folder and copied it to the Tiger system on the new hard drive section
then I rebooted and started up Snow leopard on the original part of the hard drive
then I used migration assistant to transfer from the 'Tiger install disc' drive - it was recognised by migration assistant
Where I think I may have been a bit silly
I am now not sure if the orginal backup was always visible in Snow Leopard
in Tiger I found backup.sparseimage - which when double clicked opened up my home folder
now that I have istalled Tiger as well - I can also find this in now Leopard... ...so maybe I just hadn't opened all the original folders on my backup disk...
...but for sure migration assistant could not read the backup copy

Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

Hello CaptianNike, welcome to the HP Forums.
I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Permission issues with new hard drive

Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
Suggestions???

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

Help with Restoring from Time Machine Backup with new Hard Drive

Hello. Recently, my hard drive died in my 24" Early 2008 Aluminum iMac. Luckily, I had a time machine backup, and I took it upon myself to replace the 320 GB Hard Drive with a 2 TB Seagate Barracuda disk. The hardware replacement (although difficult) went fine. Now, I'm having a bit of trouble restoring the new drive from my time machine backup. The new disk shows up in Disk Utility with the correct capacity. I formatted the new drive with Mac OS Extended (Journaled) using my installation disk. My only problem is that the drive isn't showing up when I am choosing which drive I want to restore my time machine backup onto. I can pick out the backup I want perfectly fine, but I can't find the new drive. Any help?

UPDATE: I restarted it (Classic IT Crowd "Have you tried turning it off and on" moment) and the drive shows up on screen. Right now, I'm waiting for it to "Calculate disk size needed for restore" and I'll keep you posted.
UPDATE 2: Currently restoring. Let's see if it's successful.
Message was edited by: funman895

Mac Mini won't book with new hard drives???

I have a late 2009 mac mini server running snow leopard server. I recently purchased 2 new hard drives as the I believe one of the hard drives was failing. I formatted the 2 drives and installed Mavericks OS X server on one.
When I put the 2 drives into the mac mini, the system won't boot. I just get the flashing folder. If I keep the old (snow leopard) drive in the system and connect the mavericks server disk as an external (USB connected) drive, it will boot and runs just fine.
Am I missing something??
Here are somethings additional facts:
When I have the snow leopard server drive in and it boots from that, it doesn't recognize either of the 2 new drives. Wants to either eject or initialize.
I realize that it can read the newer system.
I have to boot with the option key so that I can pick which drive to boot from.
Any thoughts would be helpful. I'm not sure why it works one way and not the other.
Thank you.

Did you set the Partition Map Scheme to GUID Partition Table before Formatting the Drives Mac OS Extended (Journaled)...?
You can check in a couple of places:
Apple > About This Mac > More Info > Hardware > Serial-ATA
Or in Disk Utility by highlighting the Drive and looking at the Drive info

M45-S165 with new Hard Drive will not reformat and recover.

I replaced the crashed Hitachi 80GB hard drive with a new WD 320 GB WD3200BEVE. I have the Toshiba Recovery and Applications / Drivers DVD Satellite M40/M45 Series CD, media number TK143/PMAE00300010. I start the computer, insert the disc and shut it down and wait a minute. When I restart the computer and press the F12 key when I see the Toshiba screen and I select boot from CD Drive and press enter. Then the screen goes black and "Starting Windows 98" shows up with other copy. Next I get "Welcome to the Toshiba Recovery Utility" and press F1 for OK to accept license agreement. Next I get "Recovery in process" briefly then the WARNING screen for erasing hard drive and press "C" for continue. Next "Toshiba" screen comes up again then "starting windows 98" again, then "Welcome to recovery utility" again. I press F1 then "C" and it starts all over again. What am I missing?

Hi, hjbugs, and welcome to Apple Discussions. Disconnecting the drive while your Powerbook was accessing it probably caused your problem. It may be repairable using DiskWarrior or TechTool Pro, but if you don't have access to one of those and aren't going to buy one, reformatting the drive with Disk Utility may be the only other way to make it usable again. If it contains data you need to recover first (i.e., data that isn't also stored on your internal HD or other storage media), download the free demo version of one of the data recovery utilities mentioned in this thread and use it to see what is recoverable. If the files you need are recoverable, buy the full version of one of the utilities and recover them.

Restoring computer with new hard drive & Logic Board using Time Machine

My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility, I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
Thanks for any help!

Arlee wrote:
My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
no. you can do a full system restore from TM using the restore utility on the snow leopard DVD.
Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility,
snow leopard disk utility?? what exactly are you doing? disk utility is not involved in restoring from TM in any way.
I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
no, this is not how you should do it. connect the AEBS by ethernet. then boot from the snow leopard dvd and use "restore system from backup" from the Utilities menu. it will let you find the backup on the network and do a full system restore from it.
Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
Thanks for any help!

Can't recover software to Satellite L745-S4210 with new hard drive

Was using the laptop when it completely froze. Used power button to force shutdown. When restarted, hard drive was making a ticking noise and got this error message:
PXE-MOF: Exiting PXE ROM
No bootable device - insert boot disk and press any key.
Setup utility did not show the presence of a hard disk drive. Assumed that hard drive had gone back.
Purchased a new hard disk drive at MicroCenter. Toshiba 2.5-inch SATA 640GB drive, the same drive that came in the laptop from the factory. Also used the opportunity to upgrade RAM from 4MB to 8MB.
Installed new hard disk drive and new memory. Ordered the Recovery Disk set from Toshiba.
At startup, new hard drive doesn't tick. Setup utility sees a Toshiba hard disk drive. Got the "no bootable device" message. Inserted the first disk of the Recovery package and held down the C key, per instructions. System began to respond but then switched to Windows Boot Manager screen.
Here are the error messages:
File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
Reseated both new hard drive and new RAM. Tried again with same result. Reinstalled old RAM. Tried again with same result.
Now at a wall. What has gone wrong? Is the new hard disk bad? Bigger problem. The unit is outside the factory warranty.
Any help is appreciated.

File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
I don't understand how that could appear when you boot from a recovery disc with a new hard drive in place. It implies there is something on the drive.
0xc00000e9 "Boot\BCD" "unexpected I/O error "
Maybe try another drive?
-Jerry

Bring up the disk utility with new hard drive

Similar Messages

Maybe you are looking for