Bringing all datasources to target systems
Hi,
What would you recommend about bringing and activating all datasources available on the system to another target system? We have only 2-system landscape. I think that when the replication happens, it will take awhile.
Should I just bring and activate only those that are required and bring them over to the target system only when necessary?
Thanks
Bring them when required.
In R/3, you need not have to transport the ones you dont need.
Once you get them to the target system of R/3, you can replicate only that in BW.
Ravi Thothadri
Similar Messages
-
Identifying the target system using FM extraction in a Generic Datasource
Hi all,
We are using a Generic datasource using FM for extraction from R/3 system to BW system. This Function module picks data from a Z table! After each successful delta extraction from the table, a flag field is set to identify whether the data is pulled or not.
We are about to use BO data services which is connected to the R/3 system to fetch data. For capturing delta records after the BW run has happened, the table can be added a new flag field to pull delta for Data services.
Is there any way to identify which target system's extraction is running particularly in the function module (for e.g., if BW extraction is triggered or BODS extraction is triggered) so as to set the respective target flag in the Z table?
Regards,
vivekLeandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck. -
The DataSource ZGLOBAL_SPND still has no target system for the delta update
Dear Experts,
I have created a Generic Datasource, while checking records in rsa3 iam getting below error.
Error: The DataSource ZGLOBAL_SPND still has no target system for the delta update.
Source system is already created.
For some of the datasources iam getting this msg.
regards
KVHi,
Fisrst did u enabled the Delta for Generic.If yes, the in RSA3 select Update Mode as "D" then provide the BI Trget system and execute.
If you correct Target system and update mode D then it should fetch Delta records only...If not please write to SAP about this issue.
Regards
Ram. -
Password reset on all target systems + how to find mskeyvalue from store?
Hi All
As per the below link for password reset
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00d69428-cc00-2c10-9ca5-b4f607bbbddf&overridelayout=true , I am able to reset the password of the user id in ume of IDM AS java server. However this document does not explain how the password reset functionality will change the password on all connected target system. For example, When I reset the password from IDM interface, the password of all my user ids in other target systems like ERP, Portal, Exchange, AD etc should change. But these information is not available on this document. Please advice how we can can configure these steps.
Also how we can find the mskeyvalue of a user in identity store exactly? . If we need to run the sql query, can you please give the exact SQL query you need to use ?
Thank you.Hi Sahad,
just for your question about the sql statement:
select attrname, aValue from mxiv_sentries where attrname = 'MSKEYVALUE' and aValue like '%<Search string>%' and IS_ID = <number of your IS_ID>.
This statement should display only one User if you have changed the placeholders.
I'm not sure, whether this helps or not. If not, please give me some more details.
Kind regards,
Achim Heinekamp -
Hi all,
Please refer to the error:
Root Components import: FAILURE
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Exception |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Error |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | CrmException..ctor
ilOffset = 0x30
at CrmException..ctor(String formattedErrorMessage, Int32 errorCode, Object[] arguments) ilOffset = 0x30
at ImportRootComponentsHandler.GetSolutionRootsCollection(Boolean throwIfMissing, Boolean skipRibbonCustomization) ilOffset = 0x209
at ImportRootComponentsHandler.ImportItem() ilOffset = 0x8
at ImportHandler.Import() ilOffset = 0x43
at RootImportHandler.ImportAndUpdateProgress(ImportHandler ih) ilOffset = 0x7
at RootImportHandler.HandleNonMetadataHandlers(String[] ImportEntities, ImportHandler& ihForCurrentPath) ilOffset = 0x33
at RootImportHandler.RunImport(String[] ImportEntities) ilOffset = 0x1D8
at ImportXml.RunImport(String[] ImportEntities) ilOffset = 0xE
at ImportXml.RunImport() ilOffset = 0x5BF
at ImportXmlService.ImportSolutionSkipCapable(Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Byte[] customizationFile, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies,
ExecutionContext context) ilOffset = 0x46
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x65
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode,
Int32 secondaryObjectTypeCode, ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion)
ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId,
OrganizationContext context, Boolean returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset
= 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at InprocessServiceProxy.ExecuteCore(OrganizationRequest request) ilOffset = 0x34
at PlatformCommand.XrmExecuteInternal() ilOffset = 0xF6
at ImportSolutionCommand.Execute() ilOffset = 0x20
at DataSource.ImportSolution(Byte[] customizationFile, Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies, IOrganizationContext
context) ilOffset = 0x0
at SolutionImportProcessPage.ImportSolution() ilOffset = 0x123
at SolutionImportProcessPage.ProcessRequestData() ilOffset = 0x4A
at SolutionImportProcessPage.ProcessAction(String action) ilOffset = 0x92
at AppUIPage.OnPreRender(EventArgs e) ilOffset = 0xD
at Control.PreRenderRecursiveInternal() ilOffset = 0x54
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x6D3
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x3C
at Page.ProcessRequest() ilOffset = 0x14
at Page.ProcessRequest(HttpContext context) ilOffset = 0x33
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() ilOffset = 0x18D
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) ilOffset = 0x15
at ApplicationStepManager.ResumeSteps(Exception error) ilOffset = 0x10A
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) ilOffset = 0x5C
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) ilOffset = 0x16A
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) ilOffset = 0x4B
>Crm Exception: Message: Cannot add a Root Component 0ffbcde4-61c1-4355-aa89-aa1d7b2b8792 of type 29 because it is not in the target system., ErrorCode: -2147188705
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Platform.Sql |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Info |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | BusinessProcessObject.ExecuteNonQuery
ilOffset = 0x28
I am getting this coming up in the error log when I attempt to import an unmanaged solution.
After searching on google Type 29 refers to a workflow.
I go into the source system and query the database by the GUID and discover that it is actually a Business Process Flow called 'Phone to Case Process'.
I do not have this process in my target system as I deleted it.
Looks like this is one of the out of the box ones. I don't think we we have changed this one much.
What does this mean and what should I be looking for??
Anyway how do I remove this offending process from the unmanaged solution xml file and attempt to re-import it?
It doesn't look like I can generate the solution again without the offending workflow/process..I managed to resolve this issue after looking at this thread:
https://social.microsoft.com/Forums/en-US/fddff17f-1cca-4d33-a666-60c08ad76b0c/crm-2011-import-failure?forum=crmdevelopment
Just modify both solution and customizations xml by searching for the guid and removing the root component -
Datasources from source system replicated as 3.x instead 7.x
Hello BI Gurus,
I am Basis consultant and got stuck with an issues with incorrect datasource version replication while trying to create and connect to ECC source system.
Generally they are replicated as 7.x but this time for some strange reason it is replicated as 3.x.
We tried RSDS to do mass migration even though we would loose DTP etc but that didn't work.
We deleted and recreated the system which also replicates the datasources as 3.x.
The source ECC system is refreshed from production so does the target BI system.
This is the first time we connected specific ECC system to BI system.
BI system has multiple ECC system as source system connected to it.
Please help me asap as our development is on hold since long.After making the copy, did you guys run BDLS to convert the former Production Logical System Name to the new name for the ECC environment and did that also to convert the former BW Logical System Name in the new ECC environment to the one it will be connected to?
If you wanted to use the same IDoc Types you were using in the original system you could use function modules RSAP_BIW_DISCONNECT and RSAP_BIW_CONNECT to disconnect the old reference and connect the new one specifying the same IDoc Type... You should do the same in BW and check table RSBASIDOC to confirm.
But yes, part of the definition of the Datasources, once you convert them is the logical system name... If it is different from the original all datasources get replicated as 3.x to maintain compatibility... At least that's what I've learnt... -
Export and Import of Users with ABAP datasource to target standalone EP.
Hi Friends,
My customer is having
Source System:BS2
ABAP+ JAVA --- usage type : BW, EP
datasource -- ABAP
now, they need datasource as LDAP
so i have suggested as attached SOW
1.Install New Instance BS3 with JAVA,EP,EP Core
2.Patching BS3 to SP15 level
3.Import PCD from BS2 to BS3
4.Configure SSO between BS2 and BS3
5.Configure Data source to LDAP
6.Testing the Configurations
7. Uninstall JAVA DATABASE from BS2
Target System:
Standalone JAVA-- only EP
datasource -- LDAP configured
I have completed all steps successfully from 1 to 5
In source system, 45 users are there with ABAP datasource and ABAP roles... Now how can i import those users with ABAP roles into target System ( Standalone EP)
Any Usermapping is required to configure.
Please suggest me to workaround on this.
Regards,
Venkat.You have to do this manually. In theory you can make a specially formatted text file to create the users and assign their portal groups, but it is quicker to just add them using the useradmin tool. If you export a user from the Java useradmin tool you can see the format of the text file. I ahve written an ABAP in the past to do the text file creation, but I can't find it now
-
0EC_PCA_3 does not return data in RSA3 if the target system is entered
Hello all,
Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
Datasource 0EC_PCA_1 works fine for the same target system.
There is one thread dealing with the same problem but the person does not provide the solution he found.
Does anyone know what the issue is?
Regards and thanks,
József.The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.
-
0CRM_SALES_ACT_1 Activate in BWA5 and Transport to Target system
Hi All,
I activated the data source 0CRM_SALES_ACT_1 in BWA5 and RSA5 (Not sure why we need to activate in BWA5 for CRM datasources - If some one can through some light that would be great), collected to transport and transported to the target system. However in the target system the data source goes in as Inactive.
I verified that the extract structure, selection module & Mapping module went into target system as active, just the data source is inactive: When tried to run using RSA3 gives an error message RJ012.
I also looked at smoxhead and smoxhead_s tables in both source and target systems and noticed that smoxhead has the entries in both the systems however smoxhead_s has entry for the data source only in the source system not in the target system.
Any help to address the issue would be of great help thanks so much in advance.
Thanks
Ravi.Hi Ravi,
Have you fixed this issue. If not add the below in your transport request.
R3TR SMO4 0CRM_SALES_ACT_1.
You will have to change the package from $TMP to the one you use. This will activate the datasource in the QA system and make the requisite entries.
Thanks,
Krishna -
How to use FTP_COMMAND to put a file in the target system
Hi All,
I have the requirement to put an excel file from apllication server to another remote system for this i am using the function modules
1) FTP_CONNECT to connect to the sourece as well as the destination systems --- Here i am able to hit the both systems.
2) for sending the data to the target system i am using FTP_COMMAND by passing the 'put' statement along with the soruce and destinations for the command parameter.
See the bellow code
CONCATENATE 'put' v_fname '
' 'wbrs1\' folder
into cmd separated by space.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = dhdl
command = cmd
COMPRESS = 'N'
VERIFY =
RFC_DESTINATION =
IMPORTING
FILESIZE =
FILEDATE =
FILETIME =
tables
data = result
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
and wbrs1 is the target system and 'Waynesboro DFS' is the folder name i ma passing to the command .
Also I tried with the following statement
CONCATENATE 'put' v_fname '
' dhost folder
into cmd separated by space.
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS,
Dhost is wbrs1.wb.na.webdti.com
And Waynesboro DFS is the folder .
Here i am getting the error as invalid argument.
See the bellow messages from result internal table.
put /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
wbrs1\ Waynesboro DFS
open /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS errno 22: Invalid argument
Please let me know how i can resolve this problem and how can I put this file in the destination system.
Thanks in advance.
Regards,
Venkatcheck this code....here data is transferred from SAP to Informatica box..
REPORT zfo_phoenix_acc_reconciliation NO STANDARD PAGE HEADING
MESSAGE-ID zz
LINE-SIZE 255
LINE-COUNT 65.
PROGRAM DECLARATION
PROGRAM ID : ZFO_PHOENIX_ACC_RECONCILIATION
DESCRIPTION : Phoneix Account Reconcilation Program-Feed
Balance sheet account balances from GL
3 files needed to be enhanced. The files are " Master
Attribute File" & "Transaction File(GL Balance)". For
Master Attribute File, data needs to be retrieved from
T001, ZDATSRC_T, SKA1, T003, T856. The corresponding
data from all the tables is downloaded into file
according to the condition specified. For Transaction
File, data needs to be retrieved from ZGEIST based on
Ledger(GG), Record Type(0), Fiscal Year, Period(016).
Then the current period is used to determine which TSLxx
& KSLxx needs to be used. Also, the conditions are
specified in specs which have been used accordingly.
The final data fetched will need to processed as files
which neednot be downloaded to Presentation/Application
server. Instead the files are been FTPed to the
Informatica Server using FTP. The location where the
files need to be located is ERC\GLOBALSAP.
TABLES
TABLES : ADR6.
TYPES
Output File - Master COA(Chart of Account)
TYPES : BEGIN OF ty_coacode ,
coa_code(20), "COA Code
coa_description(50), "COA Description
field11 TYPE x, "Line Feed
END OF ty_coacode.
Output File - Master Account
TYPES : BEGIN OF ty_acctcode ,
act_code(20), "GL Account Number
act_desc(60), "GL Account Description
act_act_flag(1), "Account marked for deletion indicator
glact_type(1), "GL Account type
fi_line(20), "Corporate Financial Statement Line
coa_code(20), "COA Code
act_defcode(3), "Account Defination Code
field11 TYPE x, "Line Feed
END OF ty_acctcode.
Output File - Master Entity
TYPES : BEGIN OF ty_entitycode,
entity_code(12), "Entity Code
com_desc(40), "Company Name
coa_code(20), "COA Code
field11 TYPE x, "Line Feed
END OF ty_entitycode.
Output File - Master Attribute
TYPES : BEGIN OF ty_attribcode,
attrib_code(5), "Attribute Code
attrib_value(20), "Attribute Value
attrib_desc(60), "Attribute Description
field11 TYPE x, "Line Feed
END OF ty_attribcode.
Output File - Transaction GL Balance
TYPES : BEGIN OF ty_glbal,
gl_reccode(2), "GL Reconciliation Code
gl_entity(12), "GL Entity - Company Code
gl_accnum(20), "Gl Group Account Number
site(4), "Site
currency_type(6), "Transaction Currency Code
year(4) TYPE n, "Year
month(2) TYPE n, "Month
as_of_date(8), "Date Account Balance
tran_cur_amt(21), "Transaction Currency Amount
usd_amount(21), "USD Amount
racct(20), "GL Account Number
zzbewar(20), "Consolidation Transaction Type
zzdatsrc(20), "Data Source
zzblart(20), "Document Type
rassc(20), "Trading Partner
field1(20), "Attribute field1
field2(20), "Attribute field2
field3(20), "Attribute field3
field4(20), "Attribute field4
field5(20), "Attribute field5
field11 TYPE x, "Line Feed
END OF ty_glbal.
Output File - Control
TYPES :BEGIN OF ty_globalsap,
clnt_name(6), "Client Name
source_name(12), "Source Name
as_of_date(8), "AS of Date
time_stamp(6), "Time Stamp
time_zone(8), "Time Zone
num_of_files(3), "Number of Files
num_of_records(9), "Number of Records
user_ids(60), "User ID(s)
field11 TYPE x, "Line Feed
END OF ty_globalsap.
Int'table to hold ZGEIST Data
TYPES : BEGIN OF ty_zgeist_data,
rldnr TYPE rldnr, "Ledger
rrcty TYPE rrcty, "Record Type
rvers TYPE rvers, "Version
ryear TYPE gjahr, "Fiscal Year
rbukrs TYPE bukrs, "Company Code
racct TYPE racct, "Account Number
robjnr TYPE gobjnr_r, "Object Number for objects
cobjnr TYPE gobjnr_c, "Object Number for transaction
sobjnr TYPE gobjnr_s, "Object Number for partner
rtcur TYPE rtcur, "Currency Key
runit TYPE meins, "Base Unit of Measure
drcrk TYPE shkzg, "Debit/Credit Indicator
rpmax TYPE rpmax, "Period
rzzstagr TYPE stagr, "Statistical key figure
zzaltkt TYPE altkt, "Account Number in Group
zzdatsrc TYPE zdatsrc, "Data Source code
zzbewar TYPE rmvct, "Transaction Type
zzblart TYPE blart, "Document Type
rassc TYPE rassc, "Trading Partner
zzvbund TYPE rassc, "Trading Partner
tslvt TYPE tslvt9, "Transactional Currency
kslvt TYPE kslvt9, "Group Currency
END OF ty_zgeist_data.
Int'table to hold ZGEIST Error Data based on conditions
TYPES : BEGIN OF ty_zgeist_error_data,
rldnr TYPE rldnr, "Ledger
rrcty TYPE rrcty, "Record Type
rvers TYPE rvers, "Version
ryear TYPE gjahr, "Fiscal Year
rbukrs TYPE bukrs, "Company Code
robjnr TYPE gobjnr_r, "Object Number for objects
cobjnr TYPE gobjnr_c, "Object Number for transaction
sobjnr TYPE gobjnr_s, "Object Number for partner
rtcur TYPE rtcur, "Currency Key
runit TYPE meins, "Base Unit of Measure
drcrk TYPE shkzg, "Debit/Credit indicator
rpmax TYPE rpmax, "Period
END OF ty_zgeist_error_data.
FIELD SYMBOLS
FIELD-SYMBOLS : <fs> TYPE ANY.
CONSTANTS
DATA : c_selected TYPE c VALUE 'X', "Field for constant value 'X'
c_y TYPE c VALUE 'Y', "For Acc marked for deletion
c_n TYPE c VALUE 'N', "For Acc not marked for deletion
c_a TYPE c VALUE 'A', "For GL Account type Asset
c_l TYPE c VALUE 'L', "For GL Account type Liability
c_q TYPE c VALUE 'Q', "For GL Account type Equity
c_r TYPE c VALUE 'R', "For GL Account type Revenue
c_e TYPE c VALUE 'E', "For GL Account type Expense
c_t TYPE c VALUE 'T', "For GL Account type
c_userid(60) TYPE c ,
c_curtp TYPE curtp VALUE '10', "Currency type
c_curtp1 TYPE curtp VALUE '30', "Currency type
c_rassc(5) TYPE c VALUE 'RASSC', "Trading Partner
c_dtsrce(6) TYPE c VALUE 'DTSRC', "Data Source
c_sacct(5) TYPE c VALUE 'SACCT', "GL Account
c_docty(5) TYPE c VALUE 'DOCTY', "Document Type
c_trxtp(5) TYPE c VALUE 'TRXTP', "Transaction Type
c_tradptn(15) TYPE c VALUE 'Trading Partner', "Trading Partner
c_datsrc(11) TYPE c VALUE 'Data Source', "Data Source
c_glacc(10) TYPE c VALUE 'GL Account', "GL Account
c_doctyp(13) TYPE c VALUE 'Document Type', "Document Type
c_trantyp(16) TYPE c VALUE 'Transaction Type'. "Transaction Type
DATA (Simple Fields)
DATA: w_cnt1 TYPE i, "No Of records in output file COA Code
w_cnt2 TYPE i, "No Of records in output file Account
w_cnt3 TYPE i, "No Of records in output file Entity
w_cnt4 TYPE i, "No Of records in output file attribute
w_cnt5 TYPE i, "No Of records in output file GL Balance
w_tot_recs TYPE i, "TOtal number of records downloaded
w_date LIKE sy-datum, "System date
w_timediff LIKE sy-uzeit, "Time Difference to GMT
w_timezone(10) TYPE c, "Time Difference to GMT
w_file_count(3) TYPE n, "File Count
w_period TYPE poper, "To hold Period Value
w_year LIKE t009b-bdatj, "To hold Fiscal Year Value
w_outfile TYPE char64, "FTPed file path
w_hdl TYPE i. "Handle for FTP
INTERNAL TABLES
Intenal table for GL Account details
DATA: BEGIN OF it_gl_detail OCCURS 0,
saknr TYPE saknr,
txt50_skat TYPE txt50_skat,
xloev TYPE xloev,
END OF it_gl_detail.
DATA: it_company_list LIKE bapi0014_1 OCCURS 0 WITH HEADER LINE,
it_coacode TYPE STANDARD TABLE OF ty_coacode WITH HEADER LINE,
it_acctcode TYPE STANDARD TABLE OF ty_acctcode WITH HEADER LINE,
it_entitycode TYPE STANDARD TABLE OF ty_entitycode
WITH HEADER LINE,
it_attribcode TYPE STANDARD TABLE OF ty_attribcode
WITH HEADER LINE,
it_glbal TYPE STANDARD TABLE OF ty_glbal WITH HEADER LINE,
it_globalsap TYPE STANDARD TABLE OF ty_globalsap WITH HEADER LINE,
it_t001 TYPE STANDARD TABLE OF t001 WITH HEADER LINE,
it_zdatsrc TYPE STANDARD TABLE OF zdatsrc_t WITH HEADER LINE,
it_ska1 TYPE STANDARD TABLE OF ska1 WITH HEADER LINE,
it_t003 TYPE STANDARD TABLE OF t003 WITH HEADER LINE,
it_t856 TYPE STANDARD TABLE OF t856 WITH HEADER LINE,
it_zgeist_data TYPE STANDARD TABLE OF ty_zgeist_data
WITH HEADER LINE,
it_zgeist_data1 TYPE STANDARD TABLE OF ty_zgeist_data
WITH HEADER LINE,
it_zgeist_data_all TYPE STANDARD TABLE OF zgeist,
wa_it_zgeist_data1 TYPE ty_zgeist_data,
wa_it_zgeist_data TYPE zgeist,
it_zgeist_error_data TYPE STANDARD TABLE OF ty_zgeist_error_data,
wa_it_zgeist_error_data TYPE ty_zgeist_error_data.
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-009.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-006,
POSITION POS_LOW.
PARAMETERS : P_USER(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-007,
POSITION POS_LOW.
PARAMETERS : P_PWD(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-008,
POSITION POS_LOW.
PARAMETERS : P_HOST(64) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-010,
POSITION POS_LOW.
SELECT-OPTIONS : S_EMAIL FOR ADR6-SMTP_ADDR NO INTERVALS.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
-- Password not visible--
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'P_PWD'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
I N I T I A L I Z A T I O N *
INITIALIZATION.
w_date0(2) = sy-datum4(2).
w_date2(2) = sy-datum6(2).
w_date4(4) = sy-datum0(4).
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
START - OF - SELECTION
START-OF-SELECTION.
Geting Company Details
PERFORM get_company_list.
Geting GL Account Details
PERFORM get_gl_acc_detail.
Geting GL Balance Details
PERFORM get_zgeist_data.
END - OF - SELECTION
PERFORM process_coacode.
PERFORM process_acctcode.
PERFORM process_entitycode.
PERFORM process_attribcode.
PERFORM process_glbal.
PERFORM process_ftp_file.
IF NOT it_zgeist_error_data[] IS INITIAL.
PERFORM write_error_report.
ENDIF.
*& Form GET_COMPANY_LIST
Form to get Company List *
FORM get_company_list.
CALL FUNCTION 'BAPI_COMPANY_GETLIST'
TABLES
company_list = it_company_list.
ENDFORM. "GET_COMPANY_LIST
*& Form GET_GL_ACC_DETAIL
Form to get the GL Account details *
FORM get_gl_acc_detail.
DATA : l_txt50 LIKE skat-txt50,
l_tabix LIKE sy-tabix.
SELECT saknr xloev
INTO TABLE it_gl_detail
FROM ska1
WHERE ktopl = 'G001'
AND ( saknr GE '1000000000' AND saknr LE '4500000000' ).
LOOP AT it_gl_detail.
l_tabix = sy-tabix.
SELECT SINGLE txt50
INTO l_txt50
FROM skat
WHERE spras = 'EN'
AND ktopl = 'G001'
AND saknr = it_gl_detail-saknr.
it_gl_detail-txt50_skat = l_txt50.
MODIFY it_gl_detail INDEX l_tabix.
CLEAR l_txt50.
ENDLOOP.
ENDFORM. "GET_GL_ACC_DETAIL
*& Form PROCESS_COACODE
Form to Populate COA data to Output internal table IT_COACODE *
FORM process_coacode.
it_coacode-coa_code = text-023. "GLOBAL.
it_coacode-coa_description = text-022. "Global SAP for ERC
it_coacode-field11 = '11'.
APPEND it_coacode.
CLEAR it_coacode.
ENDFORM. "PROCESS_COACODE
*& Form PROCESS_ACCTCODE
Form to Populate Account data to Output Internal table IT_ACCTCODE *
FORM process_acctcode.
DATA:l_saknr(10).
DATA : it_gl_detail2 LIKE it_gl_detail OCCURS 0 WITH HEADER LINE.
IF NOT it_gl_detail[] IS INITIAL.
it_gl_detail2[] = it_gl_detail[].
SORT it_gl_detail2 BY saknr.
DELETE ADJACENT DUPLICATES FROM it_gl_detail2 COMPARING saknr.
ENDIF.
IF NOT it_gl_detail2[] IS INITIAL.
LOOP AT it_gl_detail2.
MOVE it_gl_detail2-saknr TO it_acctcode-act_code.
MOVE it_gl_detail2-txt50_skat TO it_acctcode-act_desc.
Check GL Account is marked for deletion or not
IF it_gl_detail2-xloev = c_selected.
it_acctcode-act_act_flag = c_n.
ELSE.
it_acctcode-act_act_flag = c_y.
ENDIF.
Determine GL Account type based on GL account number
l_saknr = it_gl_detail2-saknr.
SHIFT l_saknr LEFT DELETING LEADING '0'.
IF l_saknr CP '1*'.
it_acctcode-glact_type = c_a.
ELSEIF l_saknr CP '2*'.
it_acctcode-glact_type = c_l.
ELSEIF l_saknr CP '3*'.
it_acctcode-glact_type = c_q.
Start of Addition by C.Ramesh Babu on 11/04/2005 "DR1K907900
ELSEIF l_saknr CP '4*'.
it_acctcode-glact_type = c_l.
End of Addition by C.Ramesh Babu on 11/04/2005 "DR1K907900
ELSEIF l_saknr CP '5*'.
it_acctcode-glact_type = c_r.
ELSEIF l_saknr CP '6*'.
it_acctcode-glact_type = c_e.
ELSEIF l_saknr CP '7*'.
it_acctcode-glact_type = c_t.
ENDIF.
it_acctcode-fi_line = 'CDR'.
it_acctcode-coa_code = 'GLOBAL'.
it_acctcode-act_defcode = '001'.
it_acctcode-field11 = '11'.
APPEND :it_acctcode.
CLEAR :it_acctcode,it_gl_detail2.
ENDLOOP.
ENDIF.
ENDFORM. "PROCESS_ACCTCODE
*& Form PROCESS_ENTITYCODE
Form to Populate Entiti data to Output file internal table *
FORM process_entitycode.
IF NOT it_company_list[] IS INITIAL.
LOOP AT it_company_list.
SHIFT it_company_list-company LEFT DELETING LEADING '0'.
MOVE it_company_list-company TO it_entitycode-entity_code.
MOVE it_company_list-name1 TO it_entitycode-com_desc.
it_entitycode-coa_code = 'GLOBAL'.
it_entitycode-field11 = '11'.
APPEND it_entitycode.
CLEAR : it_company_list,it_entitycode.
ENDLOOP.
ENDIF.
ENDFORM. "PROCESS_ENTITYCODE
*& Form PROCESS_ATTRIBCODE
Form to Populate Attribute data to output file internal table *
FORM process_attribcode.
Getting data from T001.
SELECT * FROM t001 INTO TABLE it_t001.
LOOP AT it_t001.
MOVE c_rassc TO it_attribcode-attrib_code.
MOVE it_t001-bukrs TO it_attribcode-attrib_value.
MOVE c_tradptn TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table ZDATSRC_T.
SELECT * FROM zdatsrc_t INTO TABLE it_zdatsrc.
LOOP AT it_zdatsrc.
MOVE c_dtsrce TO it_attribcode-attrib_code.
MOVE it_zdatsrc-zdatsrc TO it_attribcode-attrib_value.
MOVE c_datsrc TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table SKA1.
SELECT * FROM ska1 INTO TABLE it_ska1.
LOOP AT it_ska1.
MOVE c_sacct TO it_attribcode-attrib_code.
MOVE it_ska1-saknr TO it_attribcode-attrib_value.
MOVE c_glacc TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table T003.
SELECT * FROM t003 INTO TABLE it_t003.
LOOP AT it_t003.
MOVE c_docty TO it_attribcode-attrib_code.
MOVE it_t003-blart TO it_attribcode-attrib_value.
MOVE c_doctyp TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
Getting data from table T856.
SELECT * FROM t856 INTO TABLE it_t856.
LOOP AT it_t856.
MOVE c_trxtp TO it_attribcode-attrib_code.
MOVE it_t856-trtyp TO it_attribcode-attrib_value.
MOVE c_trantyp TO it_attribcode-attrib_desc.
it_attribcode-field11 = '11'.
APPEND it_attribcode.
CLEAR it_attribcode.
ENDLOOP.
ENDFORM. "PROCESS_ATTRIBCODE
*& Form PROCESS_GLBAL
Form to Populate GL Balance data to Output file internal table *
FORM process_glbal.
DATA : l_ctran_amt(21),
l_cusd_amt(21).
LOOP AT it_zgeist_data INTO wa_it_zgeist_data1.
*Start of change by 501030559 on 11/04/2005
it_glbal-gl_reccode = '04'.
it_glbal-gl_reccode = '05'.
*End of change by 501030559 on11/04/2005
it_glbal-gl_entity = wa_it_zgeist_data1-rbukrs.
it_glbal-gl_accnum = wa_it_zgeist_data1-zzaltkt.
it_glbal-site = 'ERC'.
it_glbal-currency_type = wa_it_zgeist_data1-rtcur.
it_glbal-year = w_year.
it_glbal-month = w_period.
it_glbal-as_of_date = w_date.
l_ctran_amt = wa_it_zgeist_data1-tslvt.
Put sign to left side of the value
IF l_ctran_amt LT 0.
TRANSLATE l_ctran_amt USING ' 0'.
CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
CHANGING
value = l_ctran_amt.
ELSE.
Trailing Zero's to the value
SHIFT l_ctran_amt RIGHT DELETING TRAILING space.
TRANSLATE l_ctran_amt USING ' 0'.
REPLACE '0' WITH '' INTO l_ctran_amt.
ENDIF.
it_glbal-tran_cur_amt = l_ctran_amt.
l_cusd_amt = wa_it_zgeist_data1-kslvt.
Put Sign to leftside of the value
IF l_cusd_amt LT 0.
TRANSLATE l_cusd_amt USING ' 0'.
CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
CHANGING
value = l_cusd_amt.
ELSE.
Trailing Zero's to the value
SHIFT l_cusd_amt RIGHT DELETING TRAILING space.
TRANSLATE l_cusd_amt USING ' 0'.
REPLACE '0' WITH '' INTO l_cusd_amt.
ENDIF.
it_glbal-usd_amount = l_cusd_amt.
it_glbal-racct = wa_it_zgeist_data1-racct.
it_glbal-zzbewar = wa_it_zgeist_data1-zzbewar.
it_glbal-zzdatsrc = wa_it_zgeist_data1-zzdatsrc.
it_glbal-zzblart = wa_it_zgeist_data1-zzblart.
it_glbal-rassc = wa_it_zgeist_data1-rassc.
it_glbal-field11 = '11'.
APPEND it_glbal.
CLEAR : wa_it_zgeist_data1, it_glbal.
ENDLOOP.
ENDFORM. "PROCESS_GLBAL
*& Form PROCESS_GLOBALSAP
Form to Populate COntrol data to Output file internal table *
FORM process_globalsap.
DATA :l_total(9),
l_len(3) type c.
Logic to get Time Zone
w_timediff = sy-tzone.
IF sy-tzone LT '0'.
w_timediff = sy-tzone * -1.
CONCATENATE 'GMT-' w_timediff(4) INTO w_timezone.
ELSE.
w_timediff = sy-tzone.
CONCATENATE 'GMT+' w_timediff(4) INTO w_timezone.
ENDIF.
LOOP AT S_EMAIL.
CONCATENATE C_USERID S_EMAIL-LOW ',' INTO C_USERID.
ENDLOOP.
l_len = strlen( c_userid ).
l_len = l_len - 1.
c_userid = c_userid+0(l_len).
it_globalsap-clnt_name = 'ERC'.
it_globalsap-source_name = 'GLOBALSAP'.
it_globalsap-as_of_date = w_date.
it_globalsap-time_stamp = sy-uzeit.
it_globalsap-time_zone = w_timezone.
it_globalsap-num_of_files = w_file_count.
MOVE w_tot_recs TO l_total.
SHIFT l_total RIGHT DELETING TRAILING space.
TRANSLATE l_total USING ' 0'.
it_globalsap-num_of_records = l_total.
it_globalsap-user_ids = c_userid.
it_globalsap-field11 = '11'.
APPEND it_globalsap.
CLEAR it_globalsap.
ENDFORM. "PROCESS_GLOBALSAP
*& Form COUNT_RECORDS
Form to count total number of records Downlaoded *
FORM count_records.
DESCRIBE TABLE it_coacode LINES w_cnt1.
DESCRIBE TABLE it_acctcode LINES w_cnt2.
DESCRIBE TABLE it_entitycode LINES w_cnt3.
DESCRIBE TABLE it_attribcode LINES w_cnt4.
DESCRIBE TABLE it_glbal LINES w_cnt5.
w_tot_recs = w_cnt1 + w_cnt2 + w_cnt3 + w_cnt4 + w_cnt5.
ENDFORM. "COUNT_RECORDS
*& Form get_zgeist_data
Form used to fetch data from ZGEIST table for the GL BAL file
FORM get_zgeist_data .
PERFORM get_period_year.
SELECT * INTO TABLE it_zgeist_data_all
FROM zgeist
WHERE rldnr EQ 'GG'
AND ryear EQ w_year
AND rrcty EQ 0
AND rpmax EQ '016'
AND ( zzaltkt GE '1000000000' AND zzaltkt LE '4500000000' )
AND rzzstagr = space.
sort it_zgeist_data_all by rbukrs rldnr zzaltkt racct
zzdatsrc zzbewar zzblart rtcur rassc.
LOOP AT it_zgeist_data_all INTO wa_it_zgeist_data.
IF wa_it_zgeist_data-zzaltkt EQ space.
wa_it_zgeist_error_data-rldnr = wa_it_zgeist_data-rldnr.
wa_it_zgeist_error_data-rrcty = wa_it_zgeist_data-rrcty.
wa_it_zgeist_error_data-rvers = wa_it_zgeist_data-rvers.
wa_it_zgeist_error_data-ryear = wa_it_zgeist_data-ryear.
wa_it_zgeist_error_data-rbukrs = wa_it_zgeist_data-rbukrs.
wa_it_zgeist_error_data-robjnr = wa_it_zgeist_data-robjnr.
wa_it_zgeist_error_data-cobjnr = wa_it_zgeist_data-cobjnr.
wa_it_zgeist_error_data-sobjnr = wa_it_zgeist_data-sobjnr.
wa_it_zgeist_error_data-rtcur = wa_it_zgeist_data-rtcur.
wa_it_zgeist_error_data-runit = wa_it_zgeist_data-runit.
wa_it_zgeist_error_data-drcrk = wa_it_zgeist_data-drcrk.
wa_it_zgeist_error_data-rpmax = wa_it_zgeist_data-rpmax.
APPEND wa_it_zgeist_error_data TO it_zgeist_error_data.
ELSE.
it_zgeist_data1-rbukrs = wa_it_zgeist_data-rbukrs.
it_zgeist_data1-rldnr = wa_it_zgeist_data-rldnr.
it_zgeist_data1-zzaltkt = wa_it_zgeist_data-zzaltkt.
it_zgeist_data1-racct = wa_it_zgeist_data-racct.
it_zgeist_data1-zzdatsrc = wa_it_zgeist_data-zzdatsrc.
it_zgeist_data1-zzbewar = wa_it_zgeist_data-zzbewar.
it_zgeist_data1-zzblart = wa_it_zgeist_data-zzblart.
it_zgeist_data1-rassc = wa_it_zgeist_data-rassc.
it_zgeist_data1-rtcur = wa_it_zgeist_data-rtcur.
PERFORM get_tslvt_kslvt_values USING w_period.
COLLECT it_zgeist_data1.
ENDIF.
CLEAR : wa_it_zgeist_data, wa_it_zgeist_error_data,
it_zgeist_data1.
ENDLOOP.
it_zgeist_data[] = it_zgeist_data1[].
ENDFORM. " get_zgeist_data
*& Form write_error_report
Form used to display error data for the GL BAL fetched data
FORM write_error_report .
DATA : l_text(80) TYPE c.
CASE w_period.
WHEN '001' OR '01'.
l_text = text-e01.
WHEN '002' OR '02'.
l_text = text-e02.
WHEN '003' OR '03'.
l_text = text-e03.
WHEN '004' OR '04'.
l_text = text-e04.
WHEN '005' OR '05'.
l_text = text-e05.
WHEN '006' OR '06'.
l_text = text-e06.
WHEN '007' OR '07'.
l_text = text-e07.
WHEN '008' OR '08'.
l_text = text-e08.
WHEN '009' OR '09'.
l_text = text-e09.
WHEN '010' OR '10'.
l_text = text-e10.
WHEN '011' OR '11'.
l_text = text-e11.
WHEN '012' OR '12'.
l_text = text-e12.
WHEN '013' OR '13'.
l_text = text-e13.
WHEN '014' OR '14'.
l_text = text-e14.
WHEN '015' OR '15'.
l_text = text-e15.
WHEN '016' OR '16'.
l_text = text-e16.
ENDCASE.
SKIP 2.
WRITE:/45 text-h01 COLOR COL_HEADING.
SKIP 2.
FORMAT COLOR 4.
WRITE:/(234) sy-uline.
WRITE:/1 sy-vline,
2 text-h02,
9 sy-vline,
10 text-h03,
19 sy-vline,
20 text-h04,
28 sy-vline,
29 text-h05,
41 sy-vline,
42 text-h06,
49 sy-vline,
50 text-h07,
69 sy-vline,
70 text-h08,
89 sy-vline,
90 text-h09,
109 sy-vline,
110 text-h10,
119 sy-vline,
120 text-h11,
130 sy-vline,
131 text-h12,
144 sy-vline,
145 text-h13,
152 sy-vline,
153 text-h14,
234 sy-vline.
WRITE:/(234) sy-uline.
FORMAT COLOR OFF.
LOOP AT it_zgeist_error_data INTO wa_it_zgeist_error_data.
FORMAT COLOR 2.
WRITE:/1 sy-vline,
4 wa_it_zgeist_error_data-rldnr,
9 sy-vline,
13 wa_it_zgeist_error_data-rrcty,
19 sy-vline,
22 wa_it_zgeist_error_data-rvers,
28 sy-vline,
32 wa_it_zgeist_error_data-ryear,
41 sy-vline,
42 wa_it_zgeist_error_data-rbukrs,
49 sy-vline,
50 wa_it_zgeist_error_data-robjnr,
69 sy-vline,
70 wa_it_zgeist_error_data-cobjnr,
89 sy-vline,
90 wa_it_zgeist_error_data-sobjnr,
109 sy-vline,
112 wa_it_zgeist_error_data-rtcur,
119 sy-vline,
123 wa_it_zgeist_error_data-runit,
130 sy-vline,
135 wa_it_zgeist_error_data-drcrk,
144 sy-vline,
147 wa_it_zgeist_error_data-rpmax,
152 sy-vline,
153 l_text,
234 sy-vline.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/(234) sy-uline.
ENDFORM. " write_error_report
*& Form get_tslvt_kslvt_values
Form used to get TSLxx & KSLxx values for the period fetched
FORM get_tslvt_kslvt_values USING period.
FIELD-SYMBOLS : <f1> TYPE ANY,
<f2> TYPE ANY.
DATA : l_tslvt_val(25) VALUE 'wa_it_zgeist_data-tsl',
l_kslvt_val(25) VALUE 'wa_it_zgeist_data-ksl',
l_tslvt TYPE tslvt9,
l_kslvt TYPE kslvt9,
l_period TYPE poper.
clear l_period.
l_period = period.
DO l_period TIMES.
CONCATENATE l_tslvt_val l_period+1(2) INTO l_tslvt_val.
CONCATENATE l_kslvt_val l_period+1(2) INTO l_kslvt_val.
ASSIGN (l_tslvt_val) TO <f1>.
l_tslvt = <f1>.
it_zgeist_data1-tslvt = it_zgeist_data1-tslvt + l_tslvt.
ASSIGN (l_kslvt_val) TO <f2>.
l_kslvt = <f2>.
it_zgeist_data1-kslvt = it_zgeist_data1-kslvt + l_kslvt.
l_period = l_period - 1.
clear : l_tslvt, l_kslvt, l_tslvt_val, l_kslvt_val.
l_tslvt_val = 'wa_it_zgeist_data-tsl'.
l_kslvt_val = 'wa_it_zgeist_data-ksl'.
if l_period = 0.
exit.
endif.
ENDDO.
ENDFORM. "get_tslvt_kslvt_values
*& Form process_ftp_file
Form used to connect & disconnect to Informatica Server using FTP
Also, used to transfer files to the Informatica location
--> p1 text
<-- p2 text
FORM process_ftp_file .
DATA: l_slen TYPE i,
l_error,
l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
c_key TYPE i VALUE 26101957.
l_error = 0.
connect to ftp server
l_pwd = p_pwd.
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = l_pwd
sourcelen = l_slen
key = c_key
IMPORTING
destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = p_user
password = l_pwd
host = p_host
rfc_destination = c_dest
IMPORTING
handle = w_hdl
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_outfile, w_file_count.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ACCTCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_acctcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ENTITYCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_entitycode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ATTRIBCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_attribcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/ERC_GLOBALSAP_GLBAL' TO w_outfile.
PERFORM download_to_ftp TABLES it_glbal USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile, w_tot_recs.
PERFORM count_records.
PERFORM process_globalsap.
MOVE 'ERC/GLOBALSAP/C_ERC_GLOBALSAP' TO w_outfile.
PERFORM download_to_ftp TABLES it_globalsap USING w_outfile.
To disconnect the FTP
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
handle = w_hdl.
To disconnect the RFC Connection
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = c_dest
EXCEPTIONS
OTHERS = 1.
ENDFORM. " process_ftp_file
*& Form download_to_ftp
Form to put the files in the Informatica Location using FTP
Path is ERC\GLOBALSAP\<filename>
FORM download_to_ftp TABLES it_tab
USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
handle = w_hdl
fname = l_string
character_mode = 'X'
TABLES
text = it_tab[]
EXCEPTIONS
tcpip_error = 1
command_error = 2
data_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING invalid_output_file.
ENDIF.
ENDFORM. " download_to_ftp
*& Form get_period_year
Form to fill the Period & Year based on the Sy-datum
FORM get_period_year .
DATA : l_month(2) TYPE c,
l_day(2) TYPE c,
l_year(4) TYPE c.
l_year = sy-datum+0(4).
l_month = sy-datum+4(2).
l_day = sy-datum+6(2).
CASE l_month.
WHEN '01'.
IF l_day <= '15'.
w_period = '12'.
w_year = l_year - 1.
ELSE.
w_period = '1'.
w_year = l_year.
ENDIF.
WHEN '02'.
IF l_day <= '15'.
w_period = '1'.
w_year = l_year.
ELSE.
w_period = '2'.
w_year = l_year.
ENDIF.
WHEN '03'.
IF l_day <= '15'.
w_period = '2'.
w_year = l_year.
ELSE.
w_period = '3'.
w_year = l_year.
ENDIF.
WHEN '04'.
IF l_day <= '15'.
w_period = '3'.
w_year = l_year.
ELSE.
w_period = '4'.
w_year = l_year.
ENDIF.
WHEN '05'.
IF l_day <= '15'.
w_period = '4'.
w_year = l_year.
ELSE.
w_period = '5'.
w_year = l_year.
ENDIF.
WHEN '06'.
IF l_day <= '15'.
w_period = '5'.
w_year = l_year.
ELSE.
w_period = '6'.
w_year = l_year.
ENDIF.
WHEN '07'.
IF l_day <= '15'.
w_period = '6'.
w_year = l_year.
ELSE.
w_period = '7'.
w_year = l_year.
ENDIF.
WHEN '08'.
IF l_day <= '15'.
w_period = '7'.
w_year = l_year.
ELSE.
w_period = '8'.
w_year = l_year.
ENDIF.
WHEN '09'.
IF l_day <= '15'.
w_period = '8'.
w_year = l_year.
ELSE.
w_period = '9'.
w_year = l_year.
ENDIF.
WHEN '10'.
IF l_day <= '15'.
w_period = '9'.
w_year = l_year.
ELSE.
w_period = '10'.
w_year = l_year.
ENDIF.
WHEN '11'.
IF l_day <= '15'.
w_period = '10'.
w_year = l_year.
ELSE.
w_period = '11'.
w_year = l_year.
ENDIF.
WHEN '12'.
IF l_day <= '15'.
w_period = '11'.
w_year = l_year.
ELSE.
w_period = '12'.
w_year = l_year.
ENDIF.
ENDCASE.
ENDFORM. " get_period_year -
Two Errors during Unicode import into Target System
I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentation. We are at service pack 18 with NW 7. During the Import ABAP phase the sapinst stopped with an errors. I found the following the first error in the SAP000.log - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
The second error appears in the SAPSLEXC.LOG - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "BWP20090325020311 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "STBWP64 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "STBWP64"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 4 Step 8)"
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
It looks like the same error but in two different logs. Has anyone seen this error before? Thanks.I checked and the datafiles for all the tablespaces are set to autoextend up to 10gb and none have done this in the tablepaces that are close to being full. I did increase three tablespaces that were showing close to being full and that did not resolve the error. Would I need to restart the process from the beginning and adjust the dbsize.xml to make it work?
-
How to determine the target system during runtime of a Generic DS?
Hi Experts, good afternoon.
I am coding a Generic Extractor using Function Module. I have to select the field TIMESTAMP on table ROOSPRMSC. To do so, I need the value of RLOGSYS that is the BW system that is calling the Extractor.
Do anybody knows how to determine via ABAP the RLOGSYS (Remote Logical System) during the runtime of the Generic DataSource Function Module?
The table ROOSPRMSC keep the TIMESTAMPs values of the last delta upload for each DataSource and for each BW target system. As I have 2 BW's loading data from the same SAP ECC system, I need to know, during runtime of my Generic DataSource, the actual system that is requesting the delta. That's the reason why I need to know the BW's logical system name that is "runnig" the delta InfoPackage.
Plese, help!!!
Thanks in advance!
Leandro VaniLeandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck. -
BPM sending messages to wrong inbound interfaces in PI and target system
Hi All,
i am doing File to proxy scenarion using bpm.i am receiving three files,two files splitting on based condition(location code) in receiver determination and sending to bpm(here one bpm receiving 3 files then it merges 3 files into one proact and some promo messages based promos in source file ,same in the second bpm with 2 files with different mapping,here target system is SAP APO SNC).i am doing testing now mapping and every thing is working fine.but first bpm sending messages(proact and promo messages) target sytem side (proact_in and promo_in)inbound inrefaces.if i am executing scenario both bpm sending (proact and promo) messaegs in target system its showing wrong bpm name.in target system also we can check messgaes sxmb_moni.
ex:if first bpm A sending 1 proact and 2 promos,and second bpm B sending 1 proact and 2 promos to target system,but in target syetm its showing sender component as 1st bpm A for 3 promo messages(here B bpm messages sending with A bpm viceversa i did the configuration correctly) and for 1 its showing second bpm. please give me suggetions how to resolve this issue.
Thanks,
seshagiri.Is the connection to SNC via idocs or proxies. If it's via idocs can you check the control record and see if the issue is not there ?
-
SOAP Receiver Adapter Target system down
Hi All,
My scenario is SOAP Receiver adapter --- > Portal system (Target system.).
Now team is taking restart of target system. It will take around 1 hr. So my question what will happen to the messages which is received by SOAP Receiver adapter in this time frame. ?Hi Rajhans ,
All the messages during that period of time will fail with System Error ,We have to re-send these messages manually once the target system is up. In stead of selecting one by one you can set Multiple Selection On option to select the messages in RWB
.Please refer the weblog will give you some idea about the standard reports which can also be used to reprocess the messages.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1051765250DB10924207601714756238End?blog=/pub/wlg/2728
do you have synchronous soap receiver or async?
Regards,
Srinivas -
Access current system or target system ID in message mapping
Hi.
I have a requirement to map three different constant values to Sales Org field, depending on whether the system is D, Q or Prod.
This needs to be done in the message mapping section of the Interface along with all the other mapping logic.
Is there any way how we can access the current system ID or the Target system ID (XI is communicating with target, in this case, ECC, using RFC receiver Communication channel)?
Please help.
Thanks.
Anuradha.Hi,
The key element would be :-
System.getProperty("SAPSYSTEMNAME");
Use this in UDF to get System Name ... and then on basis of systemname do whatever you want to perform.
Regards
Prabhat Sharma
Maybe you are looking for
-
Is there a way to get photos into iMovie 11 without using iPhoto?
I use PSE9 to organize my photos and don't want to use iPhoto. When I click on the little camera in iMovie, it only gives me the option of going to iPhoto. Thanks for any help. Peg
-
How to save Special Characters in oracle?
Is there any way to enter special characters such as ºC ? i am using J2EE and Oracle 9 i. When i try to enter 2ºC after updating the datbase it is converted to 2ºC when it is displayed in HTML. All special characters are prefixed with Â. Pls suggest
-
Setting Selection of JTree?
I have a TreeSelectionListener that calls a method for reading in data, when clicking on a treenode (The Method-call is in valueChanged() ). I'd like to select the selected node in another part of my program to read in the data again. (Like a reload
-
Installing Technical communication suite
Folks I am trying to install Technical communication Suite (mainly for Captivate at the moment - the rest I'll use later) . I am running Windows XP, Pentium 4 etc and have a licenced version of Captivate 2 I keep getting the error message Error: Unab
-
ClassNotFoundException while loading a class
Hello, I have an application that having several servlet classes. I specified servlet name and corresponding class name(full) in web.xml My problem is , I ended up with an exception when executing the following line of code for some of the files . Cl