BRM: Can roles be moved to multiple systems???

Hi,
While creating roles in BRM, it picks up the default system maintained in "Action Mapping" in SPRO. I was wondering if the same role can be moved (created/modified) in multiple systems at the same time.
Please advise.
Regards,
Faisal

Hi Faisal, thanks for your reply.
In my BRM methodology, role generation is before testing because I need the role to be generated in QA to assign it to the user.
The thing is that when I generate the role, I can select every connector in the same connector group. So, if parameter 3012 is enabled, I could regenerate an existing role that is assigned to users in PRD without testing new changes.
If I remove Action 3 then I won't be able to generate the role and will have to create a transport request.
Regards,
Fernando

Similar Messages

How can I create manual Y-axis labels in a multiple system report?

A similar question was asked by Lutz1410 on 3/30/07, but it doesn't seem that this was finally resolved. I'll try to ask the question in a different way.
I created a graph in View with 3 axis systems in the "multiple systems" mode, then transferred this to Report. I would like to apply manual scaling and text to each of the 3 axis systems, however if I change either of these parameters they are applied to all 3 Y-axes. In other words, I end up with 3 axes having exactly the same text labels and scaling.
1. For the axis text, is there a delimiter that can be used in the axis text field to tell Report that the first text value is for the first Y-axis, the 2nd value is for the next axis, etc?
2. For the scaling, is it possible to have separate scales for each Y-axis?
Of course, a workaround is to create 3 independent graphs in Report, but this is less convenient.
Thank you,
Craig

Hi Craig,
If you want to apply different manual scaling parameters to each of the stacked Y axes, then you need to use 3 separate Y axes. If you want to display a curve-specific text to each of the stacked graphs, this you can do with a DIAdem expression:
@ChnName(CCN)@@         channel name of each curve
@ChnDim(CCN)@@            channel unit of each curve
@ChnComment(CCN)@@   channel description of each curve
The corresponding value for each curve will automatically display at the correct vertical spot next to its curve.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page. I can't figure out the rename function either. Help?

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?

Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.

Hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

There are multiple ways of doing this. Here are some of them..
The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
regards,
Gautham

Trying to Sync Multiple Systems

I am having great difficulty with iSync across multliple systems. I will admit that this may be due to my own misconception about what sync is suppose to be so let me explain what I have, what I think should happen then what is happening:
Work Setup: 1 laptop
Home Setup: 1 laptop, 1 desktop
iPhone: of course ...
Having multiple systems is great. A corporate mac laptop keeps me on the move in the office, my private laptop provides me mobility out of the office and my home desktop is where I do most of my work while home. The home desktop has a couple web pages on it, so it is up 24x7. The two laptops come up for periods of time the go down.
Understanding: Turn on sync, settings to automatic, and when I make a change on any one of the systems, it gets immediately pushed to the cloud, to my phone, then back down to the other 2 systems I am not currently on.
Reality: every system fights for superiority over every other system. Every time one of the systems sync, it completely messes everything up. Here is a great example. Friday before leaving the office I created a Group calendar called "Work Group". I placed a couple existing calendars under this group and made a couple new ones. It appeared to sync to my phone OK so I believed all was well. When I got home I discovered that the desktop (which is on 24x7) had not updated based on the information obviously pushed to the cloud by my office machine (I say obviously because it did make it to my phone). When the synchronization did appear on the desktop, 2 of the work Calendars were moved into a new Group called "Group". When I checked on the cloud by logging into my mobile me account - I couldn't even recognize the format the calendars were online. Having to have brought my work laptop home for the weekend I looked at it and WTH? The calendars on that machine looked exactly like the calendars on my desktop before it did a partial sync. Now the work laptop fired a sync and it warned that there were numerous conflicts that had to be manually resloved. Surprise surprise, same thing on the desktop.
It would seem to me a simple thing to flag records that hand changed and Synchronize only those records updating the cloud. But, it appears that the entire calendar database is being pushed by every machine every time it synchronizes. So it is a push more than a sync. This is quite infuriating.
I find it hard to believe that Apple could have made such an egregious error in programming logic so I can only come to two possible conclusions. (A) My expectations and configuration settings are incorrect or (B) Apple is hiring Microsoft employees. God oh God please let it be (A).
Can someone provide insight?

iSync is only for syncing Contacts and Calendars to non-Apple mobile phones via a local USB or Bluetooth connection.
http://www.apple.com/macosx/features/isync/index.html
iSync does not sync anything between Macs, the iPhone, or to the MobileMe 'cloud'.
(The only connection iSync has with the above, is providing a UI to turn on system-wide syncing and to reset it.)
Rather than iSync, what you are using is MobileMe Sync, and the forum for that is here:
http://discussions.apple.com/forum.jspa?forumID=957
How you expect the syncing between multiple Macs and your iPhone is exactly how it should be working, and is designed to work. So something in your particular setup is not right.
I'd suggest posting in the above linked forum where all the MobileMe Sync gurus should be able to help.

UWL substitution with multiple systems

Hi all,
I need some help in understanding how an UWL substitution works with multiple systems.
We are using ESS, MSS and SRM workflows and use UWL for all workflow scenarios.
All users are using ESS, all managers are using ESS, MSS and SRM.
In the UWL configuration we defined a role base connection to the backend systems. ESS users can only make a UWL connection to R/3 and not to SRM, manager can make a connection to all systems.
The problem occurs when a manager assign an other user (not a manager) to manage his of her tasks in case of absence. Because the manager also has the rights to make a connection to the SRM system, the UWL tries now to make this connection with this delegated user. Because the user has no rights to make a connection to SRM an error is generated and no tasks at all are displayed in the users inbox.
If we grant the user right to make a connection to the SRM system, also an error is generated because this user has no user account on SRM.
Is this a normal behaviour, we only want the user to manage all the managers tasks on R/3 and not on SRM because he/she has no authorisation to do so.
Kind Regards,
Evert Schuiteman

I think this will require a separate development as I feel the forwardind table HRUs_D2 stores only user Id and if you need to set som Personnel number as substitution then the devt. should take care whether any user Id is attached to the the PERNR and then set the substitution.
Thanks
Arghadip

Not able to fetch workitem from Multiple system ( version 4.6c ) in POWL Configuration

Hi Experts,
i am configuring SAP POWL in my EHP 6 System and i am able to get work-items from same system but i am not able to get from multiple system which version is 4.6c.below steps are already done.
1.Create RFC Destination ( destination working fine )
2.in SPRO,Cross-Application Components ->Processes and Tools for Enterprise Applications -> Inbox -> Assign Connected Back-End Systems to Inbox
Added Destination for Old system 4.6c
3.Create Exception Entry for that
4.Business function FND_IBO_MULTIBE_1 activated
5.Assigned below roles to respective users
SAP_BC_BMT_WFM_INB_API_END_USR
SAP_BC_BMT_WFM_INB_API_SRV_USR
6.Added respective Task IDs in SPRO -> inbox- >Assign Task IDs to POWL Types
Please help if i any config are missing.
Regards,
Pramod Gupta.

Hi Siddharth Rajora,
Thanks will that,but as you said 4.6c is not supported you have any document where its mention like that.so we can show our client and close this issue please share if you have.thanks in advance.
Regards,
Pramod Gupta.

SOLMAN EHP1 - anyone can create support message in Satellite System's Help?

Hi,
I just curios that why everyone can create support message in satellite system-> help -> create support message?
I tested with restricted profile user and without role SAP_SUPPDESK_CREATE, NO BP created but he still manage to create support message???? Any idea??
Also, same goes to any user can process ticket in SOLMAN with no BP-Employee role and SAP_SUPPDESK_* roles assigned.
Your kind input is very much appreciated.
Thanks,
Nicholas Chang

Hi Nicholas
If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
The user entered in the RFC details probably has the authorization to create Support desk messages.
Regards
Amit

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

I Can't Partition My Hard Drive (Files Can't Be Moved)

Hey,
today I wanted to install Windows XP Professional (SP 3). I printed the Boot Camp Documentation and followed the Boot Camp Assistant. I chose a 12 GB partition (my iMac's 320 GB hard disk drive currently has a little less than 40 GB of free space available) and began the partitioning process. The progress bar slowly grew from left to right.
After a minute or two I realized that I need an installation disc for Windows. I grabbed a 4.7 GB DVD-RW (which was already written to) and slipped it into the Optiarc drive. Shortly after that the partitioning process failed with an error message saying that there were files that can't be moved.
Slightly discouraged, I decided to create my Windows install disc before dealing with this problem. Although this wasn't such a straight-forward task (the first burning attempt failed due to a medium write error right before it finished, and don't forget weird noises when inserting the disc the second time) I managed to successfully burn the .iso image containing the Windows install within three attempts.
I then tried to partition my disk again, numerous times, but didn't get lucky; the same error after the same two, three minutes. What is it with Boot Camp and my hard drive? I hope there is an answer to that, and I hope the solution wont require me to backup all of my files, reformat my HDD in "Mac OS Extended (Journaled)", and restore all of my files from the backup, as I don't have an external hard drive to which I could backup to!
I KNOW I am stupid for even trying this without a backup, and I would be devastated if I lost all of my data, but I am an optimist (in respect to catastrophes at least). I also need to get Windows ASAP, so, while a backup drive is on its way, I decided to just risk it.
Has anyone here had the same issue and managed to work around it? (Preferably without any backups involved!) If not, does somebody have advice, OTHER than… (well, you know already)?
I would appreciate any responses, even if, I guess, it's just to tell me that I should most definitely wait until I get an external disk to backup to.
Thanks,
temhawk

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

Satellite L50-A-19N can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
It goes away when I plug out my headphones..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

I see that the option called “give exclusive mode applications priority” has been checked.
Usually different applications and programs can access the sound card simultaneously.
For example: you can hear the sound in game, while you can run your own music via an external player.
This is prevented with these options “give exclusive mode applications priority”.
Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
However, I use Win 7 and Realtek sound driver… It’s another configuration.
So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

Fiori: incorrect alias used when multiple system aliases assigned

Hello all and Masayuki Sekihara
I'm implementing SAP Fiori PO/PR/Contract approval.
There is only 1 gateway system currently in order to support 4 ECC systems.
(Sandbox, development, quality and production)
Everything is working correctly when assigning only one (Sandbox) SAP system alias to the gateway service of PO approval for example.
However when we assign multiple system aliases and set the sandbox system alias as default things go wrong.
(Currently IW_BEP is not yet installed on the development; Quality and productive system)
And we noticed the service is resulting in an error message because these BEP function modules can not be found on the target system.
However the issue is that it should not call these systems as we have flagged Sandbox system as default.
Anyone has an idea or note for this?
(We temporary fixed this by assigning only a single alias to the services).
But in a later phase we want to add all in order to be able to test on all systems and run production as default.
Thanks for your help.

I don't want to use the MOC.
I want the behaviour like mentioned in the note:
The default system is used whenever the service is not called as MOC. If you have defined more than one default system alias, the first system is used as the default.
How can I achieve this?
According to my understanding now I should make sure ";m"o is not added to the URL, but how can this be achieved?
Thanks!

RAR - SU24 Config Updates - Multiple Systems

I was in the process of updating the SU24 data within RAR and was wondering how GRC differentiates between a transaction that exists in multiple systems. Typically only technical transactions would exist across systems, but this may not always be the case.
I can't say with 100% certainty that a tcd that exists across systems will be maintained with the same SU24 data. Nor can I say that it "ALWAYS" should have the same SU24 data.
When you upload the SU24 data from multiple systems and the same tcd/auth object/auth values exist, will the values be overwritten as you upload the text files for each system? I'm assuming yes? If this is the case, you would have to be cautious to the order in which you upload the text files per system.
We use SRM, BI, PI, and ECC. Any comments would be appreciated.
Thanks,
Rich

yes the text files do not have the SID but when you upload those files in RAR you specify for which system you are uploding it. By selecting the system from drop down you tell GRC for which system the SU24 data is for.
Thank you,
Partha

Ref. Orig. can't be moved to sys. trash: locked or read-only. Fix?

Another new one (amazing what one uncovers under deadline ). See screen shot:
Some of these files are from a Leaf Aptus 70 (they were part of the Ap3 Tutorial) and are very large. Large or small, I like to run a clean ship. Can I search in Finder (or Terminal) for locked or read-only files? They are all on one external drive. There are other ways to root them out, but I don't have the time right now.
Thanks.
--Kirby.
(Added:)
Can I do this to my entire referenced originals drive without _any_ repercussions?
You can unlock all files in a folder by opening the Terminal in the /Applications/Utilities/ folder and entering the following:
chflags -R nouchg
followed by a space. Drag the folder into the Terminal window and press Enter to unlock the items.
Message was edited by: Kirby Krieger

I'm not being clever today. Found a different, easy, solution. Right-clicked one of each set of Images and selected "Show in Finder". This brought up the Finder folder containing all the Images with that date. Then emptied the Aperture Trash. At warning, clicked "Continue". Went back to the Finder windows and ... found out the joke is on me: all the files in question were moved to the system trash. I have no idea what files were flagged "Read Only" or "Locked".
At some point I will "Consolidate all Originals" or relocate them to a different drive and examine the files left on the referenced Originals drive. Not sure what I'll find. All the Aptus files ( .mos) and all the other "not mine" Originals that I was trying to remove from the Library are now in my system trash.
Thanks for the help (and the caution) though -- I'm ignorant of Unix and like to think that I'm wise enough to not use it or, at a minimum, to ask experts for an "OK" first .

User-id / Roles assigned in Solution Manager system

Hi Friends,
I need an information regarding following:
User-id / Roles assigned in   SOLMAN Dev system
SM59 Destinations in Solman dev system & user-id/pwd used for connecting to Satellite systems
User-id/ Roles assigned in   Satellite systems - EG: ECC , PI , SCM ,BW   for SOLMAN Related User-ids
SM59 Destinations in Satellite systems & which user-id /pwd is used for connecting to   Solman dev system
Kindly suggest me how I can get all the above information.
Thanks & Regards,
Solman Starter

All users are created in SOLMAN_SETUP with the proper authorizations, just follow the guided procedure. In LMDB, you can set up the RFC connections to your satellite systems after you pushed the system information with RZ70 / SLD data supplier.

BRM: Can roles be moved to multiple systems???

Similar Messages

Maybe you are looking for