BRM - role in locked mode (in define stage)

Hi Experts,
We created derive roles through 'mass role derivation' and in the same time master role has not been approved yet.
All created derive roles are in locked mode (see screenshot below), even after approval of master role, those locks were not removed.
Now it is not possible to edit or delete them from BRM.
Any ideas how to remove those locks on derived roles? (currently we consider creating a program to remove those locks manually from GRACROLE table), but maybe someone has better solution? (We are on SP13)
Best regards, Andrzej

Hi Andrzej
I think you need to raise a customer message an incident  on marketplace if you have already ruled out existing WF approvals as SM12 data locks
There is a KB article for a Z program to unlock the role
1805237 - How to Unlock the Role
but implies root cause was because you had insufficient authorisation to generate the role in the plug-in. Being stuck on the define stage doesn't make sense then
It may be that the program there is the way to fix it (at least it's SAP code) but if this issue is related to an SP then it needs to be fixed. E.g. maybe SAP should have a check preventing mass role derivation if the imparting is awaiting approval.
Also check role methodology to make sure you have defined what to do for a derived role. When you upload the roles did you attempt to choose complete methodology or intend to step through the process?
Regards
Colleen

Similar Messages

  • Edit jbo.lock.mode in an EAR file

    Anyone know if I can edit jbo.lock.mode in an appmodule after I have generated an EAR file?
    Where are all properties on an app module stored (which file )?
    Regards, reZer

    Hi,
    All the application module properties are defined using configurations on the application module. The settings are stored in the bc4j.xcfg file (when you look in Jdev, select the application module, then look in the structure window and expand the files node). The configurations can be edited by right-clicking on the application module.
    Usually it is practical to create at least a second configuration for deployment, and use that in the Datacontrols.dcx file in your GUI project.
    Regards,
    Jeroen van Veldhuizen

  • Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

    Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

    Thank you, razmee209!  I must have checked everything 1,000,000 times, but when I just rechecked settings - notification - mail, I now see that Alerts -- both Show in Notification Center and Show on Lock Screen -- were turned off.  Can't believe I missed that, so THANK YOU!

  • My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop

    My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop

    The phone will automatically re-appear when it connects to the Internet. However, don't get your hopes up, as thieves know this & will make sure your phone never re-connects so you can locate it.

  • Is there a way to answer Voip calls such as Bria while the phone is in locked mode?

    We are using Voip Apps such as Bria and Avaya OneX portal with Voip client enabled for SIP extensions back to Avaya IP Office, the issue is that Apple will not allow the answer splash screen to pop up while the phone is in locked mode..
    On a smartphone you can lock the screen (for security reasons) and to unlock you need to enter a pin or password to get access to the phone.  On a native cellular call the ability to answer the call is provided on the lock screen so that the user does NOT have to unlock the phone to answer the call.  What this customer/partner is complaining about is with our VoIP portion of the application when an incoming call comes in and your phone is locked you cannot answer the call until you unlock the phone.    The issue is that Apple does NOT let application developers bypass the phones locked screen.  Call it security or whatever you want this is something that don’t make available.  Like I mentioned other VoIP applications like Counterpath suffer from the same Operating System limitation.
    So a couple things:
    1.       This is not a Bug it’s an operating system limitation.
    2.       If this is that key for a user the only options are to turn off the lock screen or switch to Android (which does allow this).
    Totally agree with the customers complaint there just isn’t much we can do. We can try to complain to Apple again however that is not going to yield anything.
    Is there any way to get around this?
    Thanks,
    Kelvin

    I'm going to give up on Apple if they don't change this soon. It worked before, answered like a regular phone call (slide to answer). But since IOS7 i really dont like my Iphone anymore. Looking around for alternatives.

  • My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-insta

    My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-install it but it did the same thing. Any ideas where to go next?
    The fact that I uninstalled Bridge and reloaded it has me concerned as to what to do next.?

    You need to force quit all other (real or fake) instances of the Application Manager.  Instructions differ between Mac or Win.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HT4061 Getting message "Connect to Itunes" on my iphone 4s. I tried but went to factory setting in lock mode? Help me to unlock

    Getting message "Connect to Itunes" on my iphone 4s. I tried but went to factory setting in lock mode? Help me to unlock?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Enqueue: Elem.lock 0 contains unpermitted lock mode . lock object EZBEV_BO

    Hello Guru's,
    we have a unusual problem in the syslog of our ERP System.
    Enqueue: Elem.lock 0 contains unpermitted lock mode . lock object EZBEV_BO
    We can't found any note or forum entry to solve this.
    We checked SAP Notes: 1324099, 891372, 606425, 447242, 1260601 and searched in the forum, but nothing helpful found.
    System Data:
    ERP 6.0 / NW7.01 with EHP4
    SAP Kernel :  701_REL
    created on  :  Jan 18 2010 21:47:07
    Kernel Patch number : 77
    Source ID  :  0.077
    DBSL Patch No. : 075
    Database
    ORACLE 10.2.0.2
    Operating System
    AIX 5.3
    Can someone help?
    regards
    Chris

    developer error

  • TS3376 how do i take my phone off lock mode from the lost and track

    how do i take my phone off lock mode from the lost and track

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T, Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. Lost or Stolen iPhone? Here’s What to do
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on MobileMe
      3. OS X Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Third-party solutions for computers:
      1. VUWER 1.5.4
      2. Sneaky ******* 0.2.0
      3. Undercover 4.7
      4. LoJack for Laptops Premium Mac
      5. STEM 2.1
      6. MacPhoneHome 3.5

  • IPod is on LOCKED MODE but I don't remember the password - What should I do

    My ipod turned itself on lock mode and I don't remember assign it any password. What should I do ?

    Connect the iPod to the main computer you use it with (if you use it with more than one, this is the first one it was connected to) and open iTunes. Then disconnect iPod from the computer, it should be unlocked: iPod: How to use the Screen Lock
    If you can't get it unlocked you'll need to restore it. Just be aware that restoring will erase the iPod's hard drive, reload the software and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • Turning off portrait lock mode on my iphone5

    I cannot turn off the portrait lock mode on my iphone5. I went to the apple support sites and everyone says to double click home button, then scroll until I find the icon (lock with an arrow circling around it) and that icon is NOWHERE to be found.  I see every other icon for various other apps etc. but not this one.  Is there another way?  I am perplexed. HELP!

    IOS7: Screen Orientation (Rotate)
    Swipe UP from the bottom edge of the screen to see the Control Center, tap the top right icon next to the Crescent to lock/unlock screen orientation.

  • I put my ipod on lock mode from "find my iphone" but I fogot the password I used. How to I get out of it?

    So I lost my ipod 5 and then I turned on lock mode using Find my iphone. But then I found my ipod and being stupid, I forgot the password. I looked up what
    I'm suppose to do and it said I had to go onto icloud and delete the device from icloud. I did that but it said, my ipod wont restart until I connect to the internet.  When I connect to itunes, it says i need to go onto icloud and turn of find my iphone, or in this case ipod. I already did that though.
    I also cant connect to the wifi. It wont let me turn it on. I think when it went into lock mode, it turned of the wifi. I cant reset my ipod unless its connected to the internet. I have no idea what to do. Help, please.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HELP! nano frozen in lock mode

    Hi there,
    While listening to my nano yesterday, as always I put it on hold to save power, and I accidentally dropped it on the floor face-down. Since then, the click wheel has been frozen in lock mode and is unresponsive. I have tried toggling the hold button back and forth many times, as well as trying to restart my ipod, in addition to letting it play until the point the battery dies and then connecting it to power (I read this may help?), all to no avail.
    Are there any ideas as to how to solve this problem? Will this problem just stop on its own?
    Please help! Thanks in advance.

    Update: I just went upstairs to try the hold switch again, and I had this thought: this whole problem started when I dropped my iPod while it was on hold, so why can't I drop it again? So I smacked it (when I say smack, I really mean a little harder than a tap) a couple times on a hard surface and guess what? It works again! I'm sure this didn't solve the problem long-term and that I will need to get it repaired in the near future, but for now my problem is solved! I'm kind of afraid to touch the hold button now, though.
    I might still send it in for repair just to avoid this happening again in the future, but only if it happens again in the next couple days/weeks.

  • Ipod frozen on lock mode

    My ipod is frozen on lock mode and i have a big flight in a few hours what do i do??  My computer won't even reconize when my ipod is plugged in and neither does my ipod.

    Important: If your iPod is frozen or won't turn on, it may be because iPod is paused or the Hold switch is in the locked position. If so, a lock symbol appears on the screen. Slide the Hold switch to the unlocked position and check the screen.
    If your iPod is frozen or won't turn on, the steps to reset it vary by model. You can easily tell which iPod model you have if you're not sure.
    Products AffectediPod nano, iPod mini, iPod
    To reset an iPod with a Click Wheel, including:
    iPod nano (4th generation)
    iPod nano (3rd generation)
    iPod nano (2nd generation)
    iPod nano
    iPod classic iPod (5th generation) 
    iPod with color display (iPod photo)
    iPod (Click Wheel)
    iPod mini
    iPod mini (2nd generation)
    Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    To reset iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector) 
    Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    Press and hold the Play/Pause and Menu buttons simultaneously until the Apple/iPod logo appears, about 6 to 8 seconds. You may need to repeat this step.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    If you are still unable to reset your iPod, use only one finger from one hand to press the Center (Select) button, and one finger from the other hand to press the Menu button.
    When you reset iPod all your music and files are saved, but some customized settings may be lost. Date and time are preserved (unless the iPod reset itself because it had no power and then was reconnected to power). Other customized settings, such as Bookmarks, On-The-Go Playlists, Shuffle, Backlight timer, and so forth are preserved from the last time the hard drive turned on.
    To reset iPod shuffle:
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position.
    Tip: When iPod shuffle is off, the green stripe by the switch is not visible.
    Wait 5 seconds.
    Move the switch to the play in order or the shuffle position. The green stripe will be visible in either position. For iPod shuffle (2nd generation), slide the power switch on (and you can see the green stripe).

  • Decline calls in lock mode is not appearing on screen to call back the same numbers.

    Hi,
    After updating IOS 7 on my iphone  4.
    Decline calls in lock mode is not appearing on screen to call back the same numbers.(Ex.. Phone is in lock mode when  calls comes  we will  decline the same by double click the power button, But same call number R contact is not appearing in screen to call back them, & Aslo now it is very very slow.. Kindly Help the same.. )

    So then this means your Energy Saver preferences are corrupted somewhere. I would at least backup your data in case something else gets corrupted by a damaged directory, or the hard drive is beginning to show signs of its dying, or you find you might later need to repair your directory. Regardless, I wouldn't update your software until you find out why your Energy Saver doesn't work properly with the only third party item being a display.

Maybe you are looking for