BRM Webservice call from BPM as an automated activity in CE 7.2

Dear All,
A simple BRM ruleset is created and published as a webservice. The WSDL is available at NWA ->SOA Management-> Application and Scenario Communication-> Single Service Administration.
The webservice test in WSNAVIGATOR provides the expected results.
In the BPM process flow, an automated activity has been created for the webservice call. This activity contains the 'Service Interface' and 'Service Reference' of the imported WSDL.
Issue:
When the process is started, the BRM webservice call results in error. The error is not visible in the log but the process flow shows a green symbol on the automatic activity, thereby indicating that the webservice call does not end and the process remains in 'In progress' state.
Can you please provide your inputs?
Thanks,
Pritish

Dear All,
The issue is resolved with the help of following document.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9009be68-1e9a-2c10-fd91-8f5fcb00474c.
Regards,
Pritish

Similar Messages

Error while calling ejb service call from BPM service

Hi,
We are using the Oracle 11.1.1.5.0
We are calling ejb service call from BPM service to update the data to Oracle database.
We are getting the below error when we executing the ejb service call from BPM Service.
<Error> <EJB> <BEA-010026> <Exception occurred du
ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
articipant in two-phase commit. To force this participation, set the GlobalTrans
actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
/activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
Connection@EBSConnection_base_domain
JDBC driver does not support XA, hence cannot be a participant in two-phase comm
it. To force this participation, set the GlobalTransactionsProtocol attribute to
LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
= EBSConnection
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
TransactionImpl.java:1881)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:345)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:239)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
Object.java:622)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
y(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
ionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
LocalBeanImpl.handleCallback(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:140)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
nce cannot be a participant in two-phase commit. To force this participation, se
t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
or EmulateTwoPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
.>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <failed to handle message
javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
be a participant in two-phase commit. To force this participation, set the Globa
lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
woPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:207)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
>
Could any body help on this issue.It is little bit urgent for us to resolve.
Thanks in advance.

Thanks Sudipto Desmukh,
The link is helpful me to resolve this issue.
Thanks,
Narasimha E

Need help regarding configuring the WebService Call from RTD to Siebel

Hi All,
Can someone help me with the information on how do i configure a Webservice Call from RTD to Siebel?
Any high-level or granular details on this would be very helpful as I am new working on this product. How can a jax-ws be utilized to achieve the same?
Thanks in advance.
Best Regards,
Hariharan

If you actually need a portal service though, this will not work. However, you could have the portal service return a Document object, which is basically the text of the HTML file you want to display. Then, when calling the portal service, you can simply output the text to the IPortalComponentResponse object
I hope this helps
Darrell

Endeca webservice call from different Application.

I am trying to call the Endeca (v2.2.2) Webservice, using the client generated class file from the wsdl file (conversation.wsdl) and pass the query to get the result. Steps so far did
•     Use apache cxf codegen plugin 2.7.0 to generate the client classes using the above wsdl.
•     Written junit test case for client class and send the query to server. I can connect to the server but getting back the ConversationFault: Sequence has length 0 but must have length 1
•     The only method I can use to call from the client is conversationPort.query(request), which is generated by cxf wd12java
•     Following is the line of code from the client class
ContentElementConfig config = new ContentElementConfig();
config.setHandlerFunction("AS select max(p_common_date_epoch) as 'MaxDate' where Social_Media_Type = 'Twitter' group by interaction_author_username, interaction_text, interaction_link, Klout_Score, Followers_Count, DocumentSentiment, calculated_entity_sentiment, SalienceSentiment order by MaxDate desc, Followers_Count desc page (0,50)");
Request request = new Request();
request.setState(null);
request.getContentElementConfig().add(config);
Client Call: Results results = webServiceClient.readQueryResults(request); // this method internally calls conversationPort.query(request).
Any thoughts or recommendation please advise.
Edited by: user4993272 on May 9, 2013 10:57 AM

Hi,
i have two application take as App1 and App2 .i want to make a webservice call from App1 to App2 . through this webservice call i will pull the data from App2 and populate the data inside a .jspx file.
i am not understanding how i will do that.
A service wont allow you to access the live instance of an application and instead create its own data session. So while you can query data that belongs to App2, you wont be able e.g. to access a users uncommitted data changes
Frank

Fedex webservice call from OOD env

Hi all,
I am trying to make fedex webservice call from OOD apps env.But i am getting below error.Same code with same data works fine from jdeveloper project.
Is any setup requried to make to work from application.Is OOD is having any restrictions in calling webservice.
Please suggest to fix this issue.
Thanks,
ashok
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.net.ConnectException: Connection timed out
faultActor:
faultNode:
faultDetail:
     {http://xml.apache.org/axis/}stackTrace:java.net.ConnectException: Connection timed out
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)

If your code works from JDeveloper and does not works when you deploy the code in an app server, and fails with connection timeout, the issue may be related to the way you have setup your proxy in JDeveloper, which need to be replicated in the JVM running your code in the middle tier.
A good place to start is the proxy setting in JDeveloper, under Tools >> Prefernces >> Web Browser and Proxy.
Best,
- Eric

Webservice call from one application to another application

Hi all,
I am new in ADF and using jdeveloper version 11.1.1.0.0. Now I am working in an application where my steps are as follows,
i have two application take as App1 and App2 .i want to make a webservice call from App1 to App2 . through this webservice call i will pull the data from App2 and populate the data inside a .jspx file.
i am not understanding how i will do that.
please give your useful comments.

Hi,
i have two application take as App1 and App2 .i want to make a webservice call from App1 to App2 . through this webservice call i will pull the data from App2 and populate the data inside a .jspx file.
i am not understanding how i will do that.
A service wont allow you to access the live instance of an application and instead create its own data session. So while you can query data that belongs to App2, you wont be able e.g. to access a users uncommitted data changes
Frank

Webservice call from PCo; FaultException: Authorization fail

Hi,
I am making a ME Webservice call from PCo.
I have configured Destination System, added a service in Configuration tab.
Using 'Test request message', i tested the call with all required inputs, the object is created in ME system.
When the same service is triggered from PLC > PCo, the call fails and i see the following message in Log tab.
UserName/password is correct..
All the required systems are running.
Log:
ME Dispatcher Could not dispatch Message [id = 75c405c5-24d4-4f70-b19a-87f6b6ae0413].
FaultException: Authorization failed. Please check security log for details.
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at SAP.Manufacturing.Connectivity.WSDestination.WSDestination.Send(Guid notificationID, Dictionary`2 requestValues)
   at SAP.Manufacturing.Connectivity.WSDestination.WSDestination.Send(NotificationMessage message)
   at SAP.Manufacturing.Connectivity.Dispatcher.ProcessMessage(NotificationMessage message, DestinationBase destination)
   at SAP.Manufacturing.Connectivity.Dispatcher.DispatchMessageExecute(Message message, Boolean unlockMessage, Boolean& stopDispatcher)
Am I missing anything?
Version:
ME: 6.1.4.9
PCo: 2.3
Thanks,

Hello Shridhar, I guess you can use use different user for authentication and user data inside XML request.
In MII, I have used MESYS for authentication and other user name inside the request XML. But you need to make sure user name inside XML has ME_Integrator role.
<me:UserId>USERID</me:UserId>
Hope this helps.
Thanks
Hari

Session between multiple Webservice calls from PI7.0

Hello XI SDNers,
I am unable to overcome my Webservice session problem using SOAP (Axis) adapter. My scenario is as follows:
I am calling a external Webservice deployed in Axis webservice engine from PI7.0, during my first call: I call synchronous "Login" webservice and I became the response "User is Logged in"
during my second synchronous call "GetItem", the webservice returns "The user doesn't have valid session". The two synchronous calls are executed from same scenario one after another!
I lost my session after the "Login". Is there any way in PI 7.0 to maintain the session?
Note: I tried the same scenario using XML SPY SOAP client, it is working!!! it is maintaining the session between multiple webservice calls.
Is there any suggestions to overcome this problem?
Thanks and regards,
Satish.

Hi Satish,
   We are working on the same sort of scenarios, where we have to call more than one webservice in a sequential fashion using the same session id details.
    What we did was we built new xsds adding session details node using the webserive request and response xsds. And we are maintaining a sessions table which contains session id and status fields in PI. So we send webservice request with the session id details. We wrote an UDF to get the session details from PI and set the status field as busy so that no other request uses the same session details.
   Webserive response again contains the sessions details which can be used for the next webservice request.
Finally after all the calls set back the status to Active in PI table.
Webservice Calls From a User Defined Function
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
Hope this helps.
Thanks,
Vijaya.

How to call a webservice proxy from BPM application?

Hi All,
Consider a case where I want to use external webservice in my BPM application. What is the best approach to achieve this.
1) What if I create a web service proxy and wants to use in the BPM app. How can I use this?
2) Which component do I need to use "Web Service" component or "Third Party Adapter" component from the component pallette?
3) If I use directly the wsdl in the "Web Service" component will it cause any issues in the future.
I searched in the net and the docs, but it didnt find the proper solutions for this.
Please provide your comments on this.
Thanks.

First of all a java proxy would not help much here - there is no use for that in SOA suite especially when it comes to using the JCA adapters. Instead reference the WSDL directly in SOA suite but there is a caveat - see my response below
1) What if I create a web service proxy and wants to use in the BPM app. How can I use this?
Dont create a WS proxy. Instead reference the WSDL and call it using a Service Task from the BPM process
2) Which component do I need to use "Web Service" component or "Third Party Adapter" component from the component pallette?
Use the WSDL directly and select "Web Service" from the component palette
3) If I use directly the wsdl in the "Web Service" component will it cause any issues in the future.
Yes there are lots of issues referencing a WSDL directly. Instead upload the WSDL reference to SOA-MDS and then use the oramds:// reference to the WSDL. This will ensure the composite does not break when the WSDL is not available. JDeveloper also goes into a tizzy when the WSDL is not up.
thanks,
Vikram

RFC call From BPM

Hi,
I have a scenario where I need to access a Function Module from BPM for certain business validations. My FM is in XI and I need to invoke that FM from BPM. How can we do that ? I am trying an RFC call but it gives me an error "No identifier defined for the system".
Pl advise, where am I wrong OR if there is a better way to do that.
Thanks,
Sid

This doesn't look like an issue for BPM. Please check whether the connection is working fine by testing a call to the RFC in a simple scenario(file to RFC or whatever).
In BPM all you need to do is a synchronous send step with abstract message type defined for both request and response structures of the FM . And in ID a receiver determination+channel and all for this step.
Best of luck...

"Error attempting to read file" at Webservice call from Adobe Form.

Hi Experts,
We have designed a Webservice form a Function Module in ECC 6.0, In the soamanager transaction the webservice works fine. But at the time of call from the Adobe form, it gives an error stating that "Error attempting to read from file" and then the URL of the Webservice to be excuted.
and if i attempt to open that file, it gives me this error:
- <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header />
- <soap-env:Body>
- <soap-env:Fault>
<faultcode>soap-env:Server</faultcode>
<faultstring xml:lang="en">SRT: Wrong Content-Type and empty HTTP-Body received</faultstring>
- <detail>
- <ns:SystemFault xmlns:ns="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/">
<Host>undefined</Host>
<Component>COREMSG</Component>
- <ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Wrong Content-Type and empty HTTP-Body received</Exception_Text>
</ChainedException>
</ns:SystemFault>
</detail>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>
In case I give my user the "SAP_ALL" role, this all works fine, so i think it is somewhere related to a missing role to be assigned.
any clues..??
any help would be appreciated, Please help..
Thanks,
Amita

Hi Juergen,
I am using it as a WSDL based data connection.
How do i check this WSDL through a web browser? I have checked it through SICF Transaction code, It gives the output in explorer as given in the first post of this thread..
Please help me resolving this issue, i feel that this issue is somewhere related to the role assignment of the user as if i provide this user an authorization of SAP_ALL then everything starts working fine, but after removing SAP_ALL this error is encountered, do u hav any pin points on this??
Thanks
Amita

Securing webservice call from to siebel

Hi,
We have implemented OPA with siebel integration, where in we launch OPA from siebel.OPA calls a webservice on siebel which fetches data from siebel. We want that weservice call to be secured i.e. to use https and not http. Anybody have any idea in doing this. The url in siebel-data-adapter file has to be https and not http.

Ecstasy wrote:
Hi,
We have implemented OPA with siebel integration, where in we launch OPA from siebel.OPA calls a webservice on siebel which fetches data from siebel. We want that weservice call to be secured i.e. to use https and not http. Anybody have any idea in doing this. The url in siebel-data-adapter file has to be https and not http.There are two parts to solving this problem.
Part 1: ( setting up the Siebel Inbound web service so it runs through HTTPS. You should consult the Siebel documentation for this and it will require running HTTPS with a certificate through something like apache or IIS (for windows).
Part 2: Once you have the inbound web services running under HTTPS, you can set the URL in the siebel-data-adapter properties to point to the HTTPS service, however, when you make a call from Web Determinations to Siebel. It will probably fail with a an exception. This will probably happen if you have used an self-signed or untrusted certificate.
The second part of this problem is setting up the java run-time environment to accept the certificate that the HTTPS service is using (set up under part 1). There are several different ways of doing this, but I found the following the easiest.
1. get the public part of the certificate.
2. create a keystore/truststore and add that certificate (or add to existing keystore).
3. point the jvm to that truststore , You do this through setting java system properties.
Example Java properties
In the example below, I have put the public certificate into a keystore called "siebel_wd_keystore" and I want to point my apache-tomcat to use that as a trust store. The system properties that need to be set are as follows.
-Djavax.net.ssl.trustStore="C:\trust_store\siebel_wd_keystore"
-Djavax.net.ssl.trustStorePassword=siebel Because this is tricky there is a very useful system property that you can set, that will give you lots of debugging information about SSL. If its not working, setting this property give you a lot more information in your logs.
-Djavax.net.debug=sslIf the setting above doesnt seem to give you more information, thats probably a sign that you aren't setting the system properties correctly for your application server.

BAM webservice call from ALBPM process

I want to call webservice at the start of the manual activity say A in ALBPM process to insert data in bam data object.I am using bam11g predefined webservice.I am able to call the web service from java client to insert data to the BAM data object.but when i invoke webservice in ALBPM process,it generates three insert operation name as insert(),insert(name:"",attribute:"") and insert(XMLObject) but incase of java client it is showing insert(name,xmlobject).if u have any suggestion please provide.

Hi All,
I am also having the same problem.
Some one PLEASE HELP, its very urgent.
Thanks,

Webservice call from WDJ component using SSO

Hi All,
I need to call a webservice from a WD Java component.
Now this is an 3rd party external WS (not an ABAP one)
That 3rd partysystem is a web based system with user accounts with password
The userid of portal is the same as the userid of the 3rd party system.
The requirement is that all WS calls from WDJ to the WS should use the individual account of the 3rd party to call the WS function... in other words not use a common service user..
So
portal login = user1/pass123
3rdpartylogin = user1/abc123
When WDJ component invokes WS method during authentication it should use 3rdparty login userid i.e. user1 to invoke method
Have any of you worked on soemthing similar ?
Prem

Still to be tried out

WebService call from Automatic Activity

hi all,
my automatic activity consume the webservice. then my work flow stop in that activity and i found the following error message inside my log.
actually my webservice is working properly even my BPM workflow stop there. And there is not other code except webservice call.
The task could not be successfully executed.
Reason: 'org.xml.sax.SAXParseException: Premature end of file.'.
Caused by: Premature end of file.
fuego.lang.ComponentExecutionException: The task could not be successfully executed.
Reason: 'org.xml.sax.SAXParseException: Premature end of file.'.
     at fuego.soaptype.SoapObject.invoke(SoapObject.java:321)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at Stars21BPM.Intray.Default_1_0.Instance.CIL_automatic(Instance.xcdl:12)
     at Stars21BPM.Intray.Default_1_0.Instance.CIL_automatic(Instance.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:512)
     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:273)
     at fuego.fengine.FEEngineExecutionContext.invokeMethodAsCil(FEEngineExecutionContext.java:219)
     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1280)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.runCil(ComponentExecutionMicroActivity.java:126)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:84)
     at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57)
     at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62)
     at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
     at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251)
     at fuego.server.execution.ToDoItem.run(ToDoItem.java:536)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:775)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:446)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: org.xml.sax.SAXParseException: Premature end of file.
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
     at org.apache.axis.client.Call.invoke(Call.java:2748)
     at org.apache.axis.client.Call.invoke(Call.java:2424)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     at fuego.soaptype.SoapCall.invoke(SoapCall.java:234)
     at fuego.soaptype.SoapObject.invoke(SoapObject.java:309)
     ... 32 more

Hi waiphyo, did you find the reason of this problem? I'm getting the same error on my Enterprise Server. When I launch, in studio, the deployed webservices, the wsdl is rendered fine, but on server i got this error...
org.xml.sax.SAXParseException: Premature end of file.
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.server.AxisServer.initSOAPConstants(AxisServer.java:345)
     at org.apache.axis.server.AxisServer.invoke(AxisServer.java:279)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:357)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:122)
     at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:206)
     at fuego.http.HttpExecution$1.run(HttpExecution.java:71)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.http.HttpExecution$HttpPrincipal.processBatch(HttpExecution.java:190)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
thanks

BRM Webservice call from BPM as an automated activity in CE 7.2

Similar Messages

Maybe you are looking for