Broad band not connecting

HI AS FROM 11.30 AM THIS MORNING MY BROADBAND HAS STOPPED WORKING . I HAVE DONE ALL CHECKS THE BT HELP SAYS A LAN LINE IS UNPLUGGED. IT ISNT. IT WAS FINE I HAVE ALL LIGHTS ON BLUE ON HUB BT VISION WORKING TELEPHONE WORKING ALL YELLOW LIGHTS ON ON CONNECTOR EXACTLY SAME AS BEFORE IT WENT OFF PLEASE HELP NO INTERNET

hi can you please not use capitals as it can make things hard to read it is also considered as shouting and rude
you say you have no internet how have you posted here
have you tried restarting your hub also have you tried changing the ethernet port in case it has developed a fault
also have you tried a new cable
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • USB Broad Band Internet Connection

    Hi
    i have 2 wireless connections i connect to at same time, a wireless router that connects to my internal network and a broad band internet connection through a 3G usb, when i use the usb alone i can access the internet but when i connect also to the wireless router to do some work on my internal network i lose connection to internet although the usb is connected and its also connected to the 3G network how can i solve this problem ?
    Regards

    Try rearranging the order of the interfaces in System Preferences : Network. At a guess I'd say OS X is favouring the wireless over the USB.

  • Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series routers

    Dear all,
     Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series router?.It is not a leased line.
    Which Router model is best for 40 Mbps DSL Broad band termination ?
    Thanks&Regards
    Ajay Jose K

    Hi , 
     Below link provides you all model in 800 series . 
    http://www.cisco.com/c/en/us/support/routers/800-series-routers/tsd-products-support-series-home.html
    For your requirement below model should suffice . 
    Complete throughput from the router is 51 Mbps .
    Cisco C891FW Integrated Services Router
    HTH
    Sandy

  • My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

    My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

    Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
    If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Broad band connection problem

    Hi thanks to John for your help in September 2012 when you sent me the link  to the moderators, so I could  ask them for  help.
    Unfortunately I  am a dinosaur with technology and I don't know how to retrieve my messages.
    The moderator did respond as you assured me they would.
    I think the last message said some thing about a ? DACS? issue.
    Now we are here on 12th October and still no broadband connection since 16th July 2012.
    The call centre in New Delhi have assured me that connection is imminent however they still have not connected me.
    Unfortunately I need to access email etc via the local library so all is very frustrating.
    Does anyone have any suggestions of the best way forward?
    Many Thanks for your support.
    Pete

    the moderators either contact you by email or telephone you will now need to contact the moderators again this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • BT broad band and Phone line

    Over the last few weeks I have had massive problems with noise issues on the phone at the same time my broadband  keeps timing out.
    I phoned BT who asked me to speak up over the phone because of the noise, they then checked the line and told me nothing wrong it must be your phone. So I bought a brand new phone and then tried again same again you have a hissing noise and I can hear faint noise of people speaking, then a loud click and the phone line goes dead.
    At the same time as this my broadband keep taking ages to connect to anything it just goes on and on and on before telling me it's timed out, this is a long going issue, a few weeks ago it was suggested I try a cheaper method of broadband because it may be better, I agreed so long as it worked better, I lost all contact and could not get on to any site.
    I contacted BT who told me today a line check it always came back OK.
    Then I was told to take the front of the box off at the phone connection to look if the wires were connected I refused so they said you must have a bad phone so I bought another one, second one, still same problem.
    I phoned BT 150 to get through to India who complained they could not hear me through the noise twice then I get cut off. After I phoned again they came up with another great idea I buy another phone.
    I now started to lose my temper and asked to be put through so I could close my account while speaking to this nice lady who tried to help my phones line goes dead, phone up again get through to somebody else who says he will look into this, bang the line goes dead. I get a phone call saying they have looked at the line nothing wrong with it and he says he cannot hear any issues with the line. At the same time my Broad band starts to work.
    So I get told they will phone me back to see if my line is fixed after three weeks of a nightmare with my phone and my broad band I'm tired to say the least, worse I do not like being made to look like a fool.
    If there is issues with the line I expect people to say OK we will look at it fix it, not you may have to pay £99 to have an engineer look at it.
    Being disabled my phone is my life line so is my broadband.

    hi checking the phone in the test socket will eliminate any internal wiring problems and if the noise is still there then you would not be charged for the call out also closing your account would not solve the noise problem as it will follow you to any other provider
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Low Broad Band Browsing Speed

    I have a very strange problem after BT provided me with a new Home Hub 3.0 as a solution to my complaint that the Broad Band connection kept disappearing.  First of all they told me that there was a line problem between the exchange and my home and then they provide a new hub as a solution......how does that work.  Now the Home Hub identified speed (see below) is very good but the ? error seconds ? appear to be very high.  When (and if) I can do a Speed Test and/or Ping test it randomly varies between 8-10 Mbits per sec and an A rating and not having enough web throughput to be able to do the test.  What is happening here.......good throughputs but very bad line or line destabilization because the up to 8 Mbits (I used to get 5-6 Mbits) has now jumped to up to 20 Mbits (my homehub says I am getting around 10 Mbits but I still have very slow web browsing and page loading).
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days,
    11:22:19
    Downstream:
    11.84 Mbps
    Upstream:
    1.031
    Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex
    A
    Latency type:
    Fast
    Noise margin
    (Down/Up):
    6.0 dB / 7.0
    dB
    Line attenuation
    (Down/Up):
    30.0 dB / 17.2
    dB
    Output power
    (Down/Up):
    20.4 dBm / 12.7
    dBm
    FEC Events
    (Down/Up):
    0 / 0
    CRC Events
    (Down/Up):
    1209004 / 728
    Loss of Framing
    (Local/Remote):
    0 / 0
    Loss of Signal
    (Local/Remote):
    0 / 0
    Loss of Power
    (Local/Remote):
    0 / 0
    HEC Events
    (Down/Up):
    8023599 / 250
    Error Seconds
    (Local/Remote):
    110175 / 43781

    Sorry....I ran test 3 before reading your reply and as it hung up in the middle I had to rerun the whole thing
    Here is s copy and paste of the results
    <script type="text/javascript" language="JavaScript" src="x-javascript/image.handler.js">// // </script> <script type="text/javascript" language="JavaScript" src="x-javascript/starttest.js">// // </script>
    <script type="text/javascript" language="JavaScript" src="x-javascript/speed.test.js">// // </script>
    <script type="text/javascript" language="JavaScript" src="x-javascript/cookie.js">// // </script>
    <script type="text/javascript" language="JavaScript">// window.history.forward(); // </script>
    FAQ
    <script type="text/javascript">// paintProgressAndMessageOnBar(-1 ,"Last Test Required" ); // </script>
    Test1 comprises of two tests
    1. Best Effort Test: -provides background information.
    Download  Speed
    97 Kbps
    0 Kbps
    21000 Kbps
    Max Achievable Speed
    Download speedachieved
    during the test was - 97 Kbps
    For your connection, the acceptable
    range of speeds is 4000-21000
    Kbps.
    Additional Information:
    Your DSL Connection Rate
    :12120 Kbps(DOWN-STREAM), 1056 Kbps(UP-STREAM)
    IP Profile for
    your line is - 10000 Kbps
    2. Upstream
    Test: -provides background information.
    Upload Speed
    801 Kbps
    0 Kbps
    1056 Kbps
    Max Achievable Speed
    >Upload speed
    achieved during the test was - 801 Kbps
    Additional
    Information:
    Upstream Rate IP profile on your line is - 1056
    Kbps
    This test was not conclusive
    and further testing is required.This might be useful for your ISP to investigate
    the fault.
    If you wish to carry out further tests,please click on 'Continue'
    button.If not, please close the window using 'Exit' button and contact your ISP
    for further assistance with these results.
    Please visit FAQ
    section if you are unable To understand the test results.
    <script type="text/javascript" language="JavaScript" src="x-javascript/wz_tooltip.js"></script>
    Notes:
    The Download
    Speed is the average rate that was achieved during this
    test.
    Notes:Your line is configured to the maximum rate that it can support or at your
    chosen fixed rate, this is known as the line rate and would be viewed through
    your CPE software or in your router configuration.
    Your IP profile is always less than the line rate and is normal on any
    network.
    The Upstream Test rate figure quoted will always be smaller than the assured
    rate profile. This is because in order for the throughput to reach its
    destination, it requires an overhead which explains the difference between the
    two.
    Notes:
    If your download
    speed lies in this range then your connection seems to be working
    fine.
    Notes:
    The Download
    Speed is the average rate that was achieved during this
    test.
    Notes:Your line is configured to the maximum rate that it can support or at your
    chosen fixed rate, this is known as the line rate and would be viewed through
    your CPE software or in your router configuration.
    Your IP profile is always less than the line rate and is normal on any
    network.
    <script type="text/javascript">// paintProgressAndMessageTestBar(0," "); // </script>
    <script type="text/javascript" language="JavaScript" src="x-javascript/wz_tooltip.js"></script>
    <script type="text/javascript" language="JavaScript" src="x-javascript/continue.js"></script>

  • New AirPort Extreme will not Connect to iPhone 5

    I just upgraded my old AirPort to an AirPort Extreme.  Everything seems to be working fine, except my iPhone 5 will not connect to the new Airport.  When it is selected as the new wifi option, the connection wheel just spins and spins and it will not connect to the wifi.

    Reset the airport to factory and start over.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    In the new setup, keep all names short, no spaces and pure alphanumeric.
    eg AEgen6 for base station name.
    Since you have issues with wireless name the bands differently.. AE24ghz and AE5ghz
    Set no security to begin with.. Set 2.4ghz to channel 11, 6, 1 in that order.
    Once the iphone connects.. please set WPA2 Personal security with a pure alphanumeric password of 10-20 characters.

  • My mac air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbook that is able to connect with no issue. HELP

    My macbook air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbookpro that is able to connect with no issue. HELP

    Reset the TC to factory and start again.
    Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
    I also recommend different names for the different bands.
    So for example.
    TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
    WIreless name.. TC24ghz for 2.4ghz
    TC5ghz for 5ghz
    You can also set the channel manually.
    If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install.

  • MacBook Pro will not connect to RADIUS authenticated SSID

    We are having problems with MacBook Pros and a MacBook Air not connecting to our wireless network. We have successfully connected hundreds of iPads and multiple other machines. All of the non-working machines are running OS X 10.9.5. The MacBook Air is brand new.
    We have a centrally managed wireless system made by Avaya. The SSID they are trying to connect to is protected by a password and RADIUS authentication. The SSID is called KT_MAC.
    A typical scenario looks like this:
    I add the device's MAC address to the RADIUS server (add it to the MAC OU in AD and add it to the MACAuth group)
    I attempt to connect to the KT_MAC SSID
    I am prompted for the password, which I type in
    Sometimes it connects on the first try, but usually it doesn't.  It will say something along the lines of Unable to join KT_MAC network or something.
    I then attempt to connect to the KT_MAC SSID again
    I am prompted for the password again, which I type in again
    It generally connects on this second attempt but not always.
    We have tried resetting the PRAM as well as deleting the saved profiles from each machine. Any guidance you can provide would be appreciated. Thank you.
    Here is the wifi.log from one of the affected MacBook Pros:
    Wed Apr 16 06:45:25.344 ***Starting Up***
    Wed Apr 16 06:45:38.389 <airportd[79]> airportdProcessDLILEvent: en1 attached (down)
    Wed Apr 16 06:45:39.056 <airportd[79]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Apr 16 10:40:37.435 ***Starting Up***
    Wed Apr 16 10:40:53.769 <airportd[79]> airportdProcessDLILEvent: en1 attached (down)
    Wed Apr 16 10:40:53.786 <airportd[79]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Apr 16 10:44:46.113 ***Starting Up***
    Wed Apr 16 10:44:46.130 <airportd[61]> airportdProcessDLILEvent: en1 attached (up)
    Thu Apr 17 09:20:53.884 ***Starting Up***
    Thu Apr 17 09:21:09.766 <airportd[79]> airportdProcessDLILEvent: en1 attached (down)
    Thu Apr 17 09:21:09.794 <airportd[79]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Thu Apr 17 09:25:11.200 ***Starting Up***
    Thu Apr 17 09:25:11.223 <airportd[62]> airportdProcessDLILEvent: en1 attached (up)
    Fri Jun  6 09:31:42.478 ***Starting Up***
    Fri Jun  6 09:31:58.966 <airportd[80]> airportdProcessDLILEvent: en1 attached (down)
    Fri Jun  6 09:31:59.026 <airportd[80]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Fri Jun  6 09:36:06.250 ***Starting Up***
    Fri Jun  6 09:36:06.270 <airportd[62]> airportdProcessDLILEvent: en1 attached (up)
    Fri Jun  6 09:45:40.827 ***Starting Up***
    Fri Jun  6 09:45:41.100 <airportd[64]> airportdProcessDLILEvent: en1 attached (up)
    Thu Aug  7 14:07:36.331 ***Starting Up***
    Thu Aug  7 14:07:51.354 <airportd[79]> airportdProcessDLILEvent: en1 attached (down)
    Thu Aug  7 14:07:51.362 <airportd[79]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Thu Aug  7 14:09:52.852 ***Starting Up***
    Thu Aug  7 14:09:52.863 <airportd[65]> airportdProcessDLILEvent: en1 attached (up)
    Thu Aug  7 14:18:27.352 ***Starting Up***
    Thu Aug  7 14:18:27.478 <airportd[64]> airportdProcessDLILEvent: en1 attached (up)
    Wed Aug 13 10:08:40.677 ***Starting Up***
    Wed Aug 13 10:08:54.747 <airportd[79]> airportdProcessDLILEvent: en1 attached (down)
    Wed Aug 13 10:08:54.775 <airportd[79]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Aug 13 10:11:16.001 ***Starting Up***
    Wed Aug 13 10:11:16.019 <airportd[65]> airportdProcessDLILEvent: en1 attached (up)
    Wed Aug 13 10:36:42.311 <airportd[65]> _processSystemPSKAssoc: No password for network <CWNetwork: 0x7fb319c0c600> [ssid=KT_MAC, bssid=cc:f9:54:9c:0c:95, security=WPA/WPA2 Personal, rssi=-48, channel=<CWChannel: 0x7fb319c0be20> [channelNumber=11(2GHz), channelWidth={20MHz}], ibss=0] in the system keychain
    Wed Aug 13 10:37:06.172 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 10:37:06.319 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 10:42:28.162 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 10:42:28.927 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 10:46:15.069 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 10:55:15.558 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 10:55:48.574 ***Starting Up***
    Wed Aug 13 10:55:48.607 <airportd[65]> airportdProcessDLILEvent: en1 attached (up)
    Wed Aug 13 10:57:06.316 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 11:01:36.170 <airportd[65]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 11:02:08.821 ***Starting Up***
    Wed Aug 13 11:02:08.860 <airportd[66]> airportdProcessDLILEvent: en1 attached (up)
    Wed Aug 13 11:03:30.508 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 11:51:20.003 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 11:51:21.436 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 11:51:28.110 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:19:51.335 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:19:51.881 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:20:42.635 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:24:03.774 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:24:04.289 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:24:13.201 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:28:39.658 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:28:40.139 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:29:19.235 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:30:30.152 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:30:30.639 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:30:39.280 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:41:45.386 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:41:45.870 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:42:01.343 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:45:19.733 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:45:20.322 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:46:21.947 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:46:46.015 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:46:46.938 <airportd[66]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:47:23.876 ***Starting Up***
    Wed Aug 13 14:47:23.980 <airportd[76]> airportdProcessDLILEvent: en1 attached (down)
    Wed Aug 13 14:47:30.166 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:47:49.006 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:50:45.857 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:50:46.733 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:50:53.301 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:53:50.650 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:53:51.139 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:53:55.950 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:54:04.344 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:54:04.890 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 14:54:10.672 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 15:29:37.354 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 15:29:37.949 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 13 15:29:43.381 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 07:45:08.606 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 07:45:09.095 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 07:45:15.685 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 07:52:36.817 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 07:52:37.317 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 07:52:43.699 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 10:35:31.857 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 10:35:32.343 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 10:35:37.513 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 14 15:14:58.070 <airportd[76]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Aug 20 09:02:37.988 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 09:04:16.526 <airportd[76]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Aug 20 13:38:15.045 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 13:42:00.449 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 13:42:00.947 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 13:42:06.664 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:00.054 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:00.467 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:05.892 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:12.064 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:12.709 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:17.467 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:26.654 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:27.140 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:32.104 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:38.083 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:38.597 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:19:44.561 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:20:58.990 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 20 14:20:59.540 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:48:48.223 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:51:31.070 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:51:31.627 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:51:44.224 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:55:39.838 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:55:40.309 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:55:48.012 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:56:10.669 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:56:11.170 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:56:16.734 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:56:38.283 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:56:38.782 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:56:43.755 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:57:27.425 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 07:57:27.862 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 11:00:35.541 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 11:07:15.263 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 11:07:20.996 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 11:07:35.210 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 11:08:08.856 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 11:08:09.394 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 11:09:40.498 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 14:00:57.796 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 14:00:58.388 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 14:01:09.718 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 14:02:10.320 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 14:02:10.841 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 14:02:16.251 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 21 15:19:57.730 <airportd[76]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Thu Aug 21 17:20:21.212 <airportd[76]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Tue Aug 26 09:40:29.421 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Aug 26 09:40:31.018 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Aug 26 09:40:39.112 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Aug 26 12:33:17.002 <airportd[76]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Aug 27 11:19:57.907 <airportd[76]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Aug 27 13:39:45.540 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 13:39:49.983 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 13:39:51.109 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 13:40:03.295 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 13:40:24.889 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 13:40:25.379 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 13:40:25.412 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 13:43:14.013 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 14:00:05.235 <airportd[76]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Aug 27 14:39:41.454 <airportd[76]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Aug 27 14:40:24.778 ***Starting Up***
    Wed Aug 27 14:40:24.962 <airportd[74]> airportdProcessDLILEvent: en1 attached (up)
    Wed Aug 27 16:19:03.698 <airportd[74]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Thu Aug 28 08:46:43.526 <airportd[74]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 10:17:27.689 <airportd[74]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Thu Aug 28 11:28:30.790 <airportd[74]> _handleLinkEvent: Got an error trying to query WiFi for power. Resetting state variables.
    Thu Aug 28 11:29:13.259 <airportd[74]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 11:29:44.661 ***Starting Up***
    Thu Aug 28 11:29:45.001 <airportd[69]> airportdProcessDLILEvent: en1 attached (up)
    Thu Aug 28 11:30:36.331 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 11:46:38.432 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 11:46:39.745 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 11:46:47.701 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 11:57:42.197 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 11:57:42.769 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 11:58:11.783 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Thu Aug 28 14:20:25.408 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 14:24:19.381 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 14:24:19.850 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Aug 28 14:24:31.421 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Fri Aug 29 14:56:26.295 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:22:35.627 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:22:36.623 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:22:55.827 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:23:02.069 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:23:02.769 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:23:09.667 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:23:16.290 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:23:16.963 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:23:22.575 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:25:26.678 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:25:27.200 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:25:32.201 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:26:13.725 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:26:14.253 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:26:20.486 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:26:42.304 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:26:42.817 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:26:47.337 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:27:16.340 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:27:16.796 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:27:23.720 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:29:15.644 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:29:16.061 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Aug 29 15:29:18.938 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Sep  3 09:35:54.553 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 09:35:55.902 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 09:36:02.003 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 10:16:04.232 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 10:16:05.097 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 10:16:11.571 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:23:20.719 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:23:41.332 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:23:42.272 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:24:19.455 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:24:26.410 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:24:56.452 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:25:01.587 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep  3 11:25:01.710 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 08:07:04.320 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 08:07:05.150 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 09:30:29.203 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 15:37:43.025 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 15:37:43.637 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 15:39:31.062 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 15:42:25.933 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 15:42:26.467 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep  4 15:42:34.515 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Fri Sep  5 07:50:25.167 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Sep  5 07:50:25.648 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Fri Sep  5 07:50:42.279 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Fri Sep  5 11:54:40.981 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Sep 10 08:41:58.791 <airportd[69]> _handleLinkEvent: Got an error trying to query WiFi for power. Resetting state variables.
    Thu Sep 11 10:07:01.271 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Sep 17 15:36:49.049 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 17 16:01:44.231 <airportd[69]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Thu Sep 18 08:56:41.771 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep 18 08:56:43.081 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep 18 08:56:43.186 <airportd[69]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Thu Sep 18 09:00:32.568 ***Starting Up***
    Thu Sep 18 09:00:33.214 <airportd[64]> airportdProcessDLILEvent: en1 attached (up)
    Mon Sep 22 09:22:24.363 <airportd[64]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Mon Sep 22 09:22:32.890 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Sep 23 14:41:33.196 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Sep 23 14:45:22.840 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Sep 23 14:45:23.438 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Sep 23 14:45:32.513 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 14:30:58.274 <airportd[64]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Wed Sep 24 14:56:26.902 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 14:57:33.995 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 14:57:34.531 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 14:57:34.646 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 15:39:07.563 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 15:40:16.183 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 15:40:16.637 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Wed Sep 24 15:40:43.234 <airportd[64]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Fri Oct  3 07:41:49.370 <airportd[64]> _handleLinkEvent: WiFi is not powered. Resetting state variables.
    Tue Oct  7 07:54:00.397 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Oct  7 08:10:14.340 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Oct  7 08:10:15.306 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Oct  7 08:10:21.639 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Oct  7 09:04:53.718 <airportd[64]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Oct  7 09:05:55.913 ***Starting Up***
    Tue Oct  7 09:05:55.937 <airportd[63]> airportdProcessDLILEvent: en1 attached (down)
    Tue Oct  7 09:08:48.018 <kernel> IO80211ScanManager::startScanMultiple: Scan request received from 'airportd' (pid 63) (2 SSIDs, 0 BSSIDs).
    Tue Oct  7 09:08:48.018 <kernel> IO80211ScanManager::startScanMultiple: Initiating scan.
    Tue Oct  7 09:08:48.323 <airportd[63]> userOnConsole: user: physed
    Tue Oct  7 09:08:48.323 <airportd[63]> __startAutoJoinForInterface_block_invoke: AUTOJOIN: Already in progress for interface en1 in wake context 0.
    Tue Oct  7 09:08:48.437 <airportd[63]> userOnConsole: user: physed
    Tue Oct  7 09:08:48.437 <airportd[63]> __startAutoJoinForInterface_block_invoke: AUTOJOIN: Already in progress for interface en1 in wake context 0.
    Tue Oct  7 09:08:48.870 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from 'locationd' (pid 41) ().
    Tue Oct  7 09:08:48.870 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'airportd' (pid 63).
    Tue Oct  7 09:08:48.871 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'locationd' (pid 41).
    Tue Oct  7 09:08:48.881 <airportd[63]> matchAndJoinNetworkListAgainstScanResults: matched with SSID “KT_MAC”
    Tue Oct  7 09:08:48.881 <airportd[63]> _doAssociate: network: “KT_MAC”, systemMode: 1, userOnConsole: 1
    Tue Oct  7 09:08:48.888 <airportd[63]> _doAssociate: Successfully pulled the password from the keychain. Now trying to associate.
    Tue Oct  7 09:08:48.920 <airportd[63]> _handleNewMessage: Received XPC message, event = ASSOC_EVENT, pid = 63
    Tue Oct  7 09:08:48.921 <airportd[63]> associate: INFO: airportd associate: network=<CWNetwork: 0x7fb243510a20> [ssid=KT_MAC, bssid=cc:f9:54:9c:0c:95, security=WPA/WPA2 Personal, rssi=-46, channel=<CWChannel: 0x7fb2435157d0> [channelNumber=1(2GHz), channelWidth={20MHz}], ibss=0], is8021X=0, remember=1
    Tue Oct  7 09:08:48.930 <airportd[63]> associate: INFO: Checking if admin authorization is required
    Tue Oct  7 09:08:48.936 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/CachedScanRecord' 'State:/Network/Interface/en1/AirPort/Power Status' }
    Tue Oct  7 09:08:48.936 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CachedScanRecord'
    Tue Oct  7 09:08:48.936 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Power Status'
    Tue Oct  7 09:08:48.936 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Busy' }
    Tue Oct  7 09:08:48.936 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Busy'
    Tue Oct  7 09:08:48.937 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/CHANNEL' 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp' }
    Tue Oct  7 09:08:48.937 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CHANNEL'
    Tue Oct  7 09:08:48.937 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp'
    Tue Oct  7 09:08:48.982 <kernel> parseRSNIE: groupCipherType = 3 pairwiseCipherType = 5 authSel = 2
    Tue Oct  7 09:08:48.982 <kernel> initWithInterfaceAndIE: _myMacAddress 2c:be:08:eb:fc:9e
    Tue Oct  7 09:08:48.982 <kernel> setPMK: PMK SET!
    Tue Oct  7 09:08:48.988 <airportd[63]> _p2pSupEventCallback: APPLE80211_M_LINK_CHANGED
    Tue Oct  7 09:08:48.988 <airportd[63]> _p2pSupEventCallback: Primary interface link marked up
    Tue Oct  7 09:08:48.988 <airportd[63]> _p2pSupEventCallback: New channel = 36 (flags=0x214)
    Tue Oct  7 09:08:48.988 <airportd[63]> _bsd_80211_event_callback: LINK_CHANGED (en1)
    Tue Oct  7 09:08:48.988 <airportd[63]> airportdProcessDriverEvent: link changed
    Tue Oct  7 09:08:48.993 <airportd[63]> _bsd_80211_event_callback: SSID_CHANGED (en1)
    Tue Oct  7 09:08:48.993 <airportd[63]> _bsd_80211_event_callback: BSSID_CHANGED (en1)
    Tue Oct  7 09:08:48.993 <airportd[63]> _p2pSupEventCallback: APPLE80211_M_BSSID_CHANGED
    Tue Oct  7 09:08:48.993 <airportd[63]> __AirPortOpportunisticRoamBSSIDChanged: <en1> BSSID Change Event old <CC:F9:54:9C:0C:85>, new <CC:F9:54:9C:0C:85>reset Opp Roam to <-2147483648>
    Tue Oct  7 09:08:48.993 <airportd[63]> _bsd_80211_event_callback: Frequency Band updated <2>
    Tue Oct  7 09:08:48.993 <airportd[63]> BluetoothCoexHandleUpdateForNode: <en1> Handle Bluetooth Coex: FrequencyBand <2>, Bluetooth Bandwidth Utilization <0>, Clamshell Mode <0>
    Tue Oct  7 09:08:48.993 <airportd[63]> BluetoothCoexModeSet: <en1> already set to BT Coex mode 'Off', do not perform APPLE80211_IOC_BTCOEX_MODE
    Tue Oct  7 09:08:48.993 <airportd[63]> BluetoothCoexSettingPerChainTransmitPowerOffsets: Per TX Chain Power Offset Control (
    Tue Oct  7 09:08:48.993     0,
    Tue Oct  7 09:08:48.993     0,
    Tue Oct  7 09:08:48.993     0
    Tue Oct  7 09:08:48.993 )
    Tue Oct  7 09:08:48.996 <kernel> en1: Received EAPOL packet (length = 113)
    Tue Oct  7 09:08:48.996 <kernel> inputEAPOLFrame: 0 extra bytes present in EAPOL frame.
    Tue Oct  7 09:08:48.996 <kernel> inputEAPOLFrame: Received message 1 of 4
    Tue Oct  7 09:08:48.996 <kernel> FULL RSN IE FOUND:
    Tue Oct  7 09:08:48.996 [00000000] 30 18 01 00 00 0F AC 02 02 00 00 0F AC 04 00 0F AC 02 01 00 00 0F AC 02 0C 00
    Tue Oct  7 09:08:48.996 <kernel> storeFullRSNIE: getAP_IE_LIST returned 0
    Tue Oct  7 09:08:48.996 <kernel> PMK:
    Tue Oct  7 09:08:48.996 [00000000] 61 35 71 AB 2C F6 AF 24 23 06 8D C5 1E 5F 75 88 0A B9 72 A4 5E 05 BA F2 54 A5 2E 64 0E 2F
    Tue Oct  7 09:08:48.996 [0000001E] F1 E3
    Tue Oct  7 09:08:48.996 <kernel> TPTK:
    Tue Oct  7 09:08:48.996 [00000000] 35 38 A9 BA 8C C2 A7 E2 8B FF 84 0B AC 62 21 01 E8 7C 00 CB 0C 64 36 C7 17 F7 BD 4A 20 1C
    Tue Oct  7 09:08:48.996 [0000001E] 59 9E 58 DC 8C 88 BF 46 31 43 7F 3D 63 07 BC E4 2D B8 B9 4D AA D7 D0 AB 2F CB 49 F0 CB F7
    Tue Oct  7 09:08:48.996 [0000003C] B5 D1 85 CC
    Tue Oct  7 09:08:48.996 <kernel> KEY MIC:
    Tue Oct  7 09:08:48.996 [00000000] 47 E1 FD 97 16 21 0F 8F BE 93 08 63 65 E7 83 50
    Tue Oct  7 09:08:48.996 <kernel> process1of4: sending replyPacket 135 bytes
    Tue Oct  7 09:08:48.996 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Power Status' 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp' 'State:/Network/Interface/en1/AirPort/Busy' }
    Tue Oct  7 09:08:48.997 <kernel> en1: Received EAPOL packet (length = 217)
    Tue Oct  7 09:08:48.997 <kernel> inputEAPOLFrame: 0 extra bytes present in EAPOL frame.
    Tue Oct  7 09:08:48.997 <kernel> inputEAPOLFrame: decrypting key data
    Tue Oct  7 09:08:48.997 <kernel> inputEAPOLFrame: Received message 3 of 4
    Tue Oct  7 09:08:48.997 <kernel> process3of4: Performing IE check.
    Tue Oct  7 09:08:48.997 <kernel> process3of4: sending replyPacket ( len = 113 ).
    Tue Oct  7 09:08:48.997 <kernel> process3of4: received pairwise GTK
    Tue Oct  7 09:08:48.997 <kernel> ptkThread: Sleeping!
    Tue Oct  7 09:08:48.997 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/SSID' 'State:/Network/Interface/en1/AirPort/CachedScanRecord' 'State:/Network/Interface/en1/AirPort/SSID_STR' }
    Tue Oct  7 09:08:48.999 <kernel> ptkThread: Installing PTK!
    Tue Oct  7 09:08:48.999 <kernel> PTK:
    Tue Oct  7 09:08:48.999 [00000000] 58 DC 8C 88 BF 46 31 43 7F 3D 63 07 BC E4 2D B8
    Tue Oct  7 09:08:48.999 <kernel> ptkThread: Installing GTK!
    Tue Oct  7 09:08:48.999 <kernel> installGTK: setting cipher key (flags = 0x0)
    Tue Oct  7 09:08:49.000 <kernel> RSC:
    Tue Oct  7 09:08:49.000 [00000000] 22 0B 1F 01 00 00
    Tue Oct  7 09:08:49.000 <kernel> GTK:
    Tue Oct  7 09:08:49.000 [00000000] 12 64 92 29 99 8D 4C 8A D2 D5 CC E5 5B CB B7 09 96 6B 53 F9 88 F4 C7 B7 71 72 DD 88 F1 EB
    Tue Oct  7 09:08:49.000 [0000001E] 0C FC
    Tue Oct  7 09:08:49.000 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/CHANNEL' }
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessDriverEvent: SSID changed
    Tue Oct  7 09:08:49.000 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/BSSID' }
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessDriverEvent: BSSID changed
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Power Status'
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp'
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Busy'
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID'
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CachedScanRecord'
    Tue Oct  7 09:08:49.000 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID_STR'
    Tue Oct  7 09:08:49.001 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CHANNEL'
    Tue Oct  7 09:08:49.001 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/BSSID'
    Tue Oct  7 09:08:49.028 <airportd[63]> _bsd_80211_event_callback: LINK_QUALITY (en1)
    Tue Oct  7 09:08:49.103 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Power Status' 'State:/Network/Interface/en1/AirPort/UserMode8021X' }
    Tue Oct  7 09:08:49.103 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Power Status'
    Tue Oct  7 09:08:49.104 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/UserMode8021X'
    Tue Oct  7 09:08:49.105 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp' }
    Tue Oct  7 09:08:49.105 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp'
    Tue Oct  7 09:08:49.109 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Busy' 'State:/Network/Interface/en1/AirPort/SSID' 'State:/Network/Interface/en1/AirPort/CachedScanRecord' }
    Tue Oct  7 09:08:49.110 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Busy'
    Tue Oct  7 09:08:49.110 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID'
    Tue Oct  7 09:08:49.110 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CachedScanRecord'
    Tue Oct  7 09:08:49.110 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/SSID_STR' 'State:/Network/Interface/en1/AirPort/CHANNEL' }
    Tue Oct  7 09:08:49.110 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID_STR'
    Tue Oct  7 09:08:49.110 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CHANNEL'
    Tue Oct  7 09:08:49.110 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/BSSID' }
    Tue Oct  7 09:08:49.111 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/BSSID'
    Tue Oct  7 09:08:49.112 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/WEPOpenSystem' }
    Tue Oct  7 09:08:49.112 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEPOpenSystem'
    Tue Oct  7 09:08:49.112 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/WEP40' }
    Tue Oct  7 09:08:49.113 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEP40'
    Tue Oct  7 09:08:49.383 <airportd[63]> userOnConsole: user: physed
    Tue Oct  7 09:08:49.383 <airportd[63]> __startAutoJoinForInterface_block_invoke: AUTOJOIN: Already in progress for interface en1 in wake context 0.
    Tue Oct  7 09:08:49.394 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from 'airportd' (pid 63) ().
    Tue Oct  7 09:08:49.395 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'airportd' (pid 63).
    Tue Oct  7 09:08:49.512 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from 'airportd' (pid 63) ().
    Tue Oct  7 09:08:49.513 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'airportd' (pid 63).
    Tue Oct  7 09:08:49.522 <airportd[63]> _doAssociate: assocError (0)
    Tue Oct  7 09:08:49.522 <airportd[63]> matchAndJoinNetworkListAgainstScanResults: successfully associated to “KT_MAC”
    Tue Oct  7 09:08:49.527 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Power Status' 'State:/Network/Interface/en1/AirPort/UserMode8021X' }
    Tue Oct  7 09:08:49.527 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Power Status'
    Tue Oct  7 09:08:49.527 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/UserMode8021X'
    Tue Oct  7 09:08:49.528 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from 'SystemUIServer' (pid 167) ().
    Tue Oct  7 09:08:49.528 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp' 'State:/Network/Interface/en1/AirPort/WEPOpenSystem' }
    Tue Oct  7 09:08:49.529 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp'
    Tue Oct  7 09:08:49.530 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEPOpenSystem'
    Tue Oct  7 09:08:49.530 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'SystemUIServer' (pid 167).
    Tue Oct  7 09:08:49.530 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/WEP40' }
    Tue Oct  7 09:08:49.532 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEP40'
    Tue Oct  7 09:08:49.532 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Busy' }
    Tue Oct  7 09:08:49.532 <airportd[63]> interfaceBusyStateChanged: Busy state for en1 changed to not busy. gSystemSleeping = 0, gMaintenanceWake = 0
    Tue Oct  7 09:08:49.532 <airportd[63]> _updateInterfaceBusySetting: Disabling P2P scan suppress
    Tue Oct  7 09:08:49.532 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Busy'
    Tue Oct  7 09:08:49.534 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/SSID' 'State:/Network/Interface/en1/AirPort/CachedScanRecord' 'State:/Network/Interface/en1/AirPort/SSID_STR' 'State:/Network/Interface/en1/AirPort/CHANNEL' }
    Tue Oct  7 09:08:49.534 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID'
    Tue Oct  7 09:08:49.534 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CachedScanRecord'
    Tue Oct  7 09:08:49.534 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID_STR'
    Tue Oct  7 09:08:49.534 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CHANNEL'
    Tue Oct  7 09:08:49.534 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/BSSID' }
    Tue Oct  7 09:08:49.534 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/BSSID'
    Tue Oct  7 09:08:49.535 <airportd[63]> __startAutoJoinForInterface_block_invoke_2: exiting
    Tue Oct  7 09:08:52.043 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Service/7916B194-D6E3-4D97-947E-70FBB10ECCED/DHCP' }
    Tue Oct  7 09:08:52.043 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Service/7916B194-D6E3-4D97-947E-70FBB10ECCED/DHCP'
    Tue Oct  7 09:08:52.043 <airportd[63]> _processDHCPChanges: State:/Network/Service/7916B194-D6E3-4D97-947E-70FBB10ECCED/DHCP
    Tue Oct  7 09:08:52.043 <airportd[63]> _processDHCPChanges: DHCP airport_changed = 1
    Tue Oct  7 09:08:52.044 <airportd[63]> _setDHCPMessage: dhcpInfoKey "State:/Network/Interface/en1/AirPort/DHCP Message" = (null)
    Tue Oct  7 09:08:54.695 <kernel> IO80211ScanManager::startScanMultiple: Scan request received from 'SystemUIServer' (pid 167) (2 SSIDs, 0 BSSIDs).
    Tue Oct  7 09:08:54.695 <kernel> IO80211ScanManager::startScanMultiple: Initiating scan.
    Tue Oct  7 09:08:57.902 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'SystemUIServer' (pid 167).
    Tue Oct  7 09:08:57.902 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from 'locationd' (pid 41) ().
    Tue Oct  7 09:08:57.903 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'locationd' (pid 41).
    Tue Oct  7 09:08:58.788 <airportd[63]> _SC_callback: Changed keys = { 'Setup:/Network/Interface/en1/AirPort' }
    Tue Oct  7 09:08:58.788 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'Setup:/Network/Interface/en1/AirPort'
    Tue Oct  7 09:08:58.798 <airportd[63]> userOnConsole: user: physed
    Tue Oct  7 09:08:58.798 <airportd[63]> __startAutoJoinForInterface_block_invoke_2: AUTOJOIN: Starting for interface en1 in wake context 0.
    Tue Oct  7 09:08:58.802 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Power Status' 'State:/Network/Interface/en1/AirPort/UserMode8021X' 'State:/Network/Interface/en1/AirPort/BSSID' }
    Tue Oct  7 09:08:58.802 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Power Status'
    Tue Oct  7 09:08:58.802 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/UserMode8021X'
    Tue Oct  7 09:08:58.802 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/BSSID'
    Tue Oct  7 09:08:58.803 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp' }
    Tue Oct  7 09:08:58.803 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp'
    Tue Oct  7 09:08:58.805 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/WEPOpenSystem' 'State:/Network/Interface/en1/AirPort/CHANNEL' 'State:/Network/Interface/en1/AirPort/WEP40' }
    Tue Oct  7 09:08:58.805 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEPOpenSystem'
    Tue Oct  7 09:08:58.805 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CHANNEL'
    Tue Oct  7 09:08:58.805 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEP40'
    Tue Oct  7 09:08:58.808 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Busy' }
    Tue Oct  7 09:08:58.808 <airportd[63]> interfaceBusyStateChanged: Busy state for en1 changed to busy. gSystemSleeping = 0, gMaintenanceWake = 0
    Tue Oct  7 09:08:58.808 <airportd[63]> _updateInterfaceBusySetting: Enabling P2P scan suppress
    Tue Oct  7 09:08:58.809 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Busy'
    Tue Oct  7 09:08:58.809 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/SSID' 'State:/Network/Interface/en1/AirPort/CachedScanRecord' }
    Tue Oct  7 09:08:58.809 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID'
    Tue Oct  7 09:08:58.809 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CachedScanRecord'
    Tue Oct  7 09:08:58.809 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/SSID_STR' }
    Tue Oct  7 09:08:58.809 <airportd[63]> _doAutoJoin: Wi-Fi supports multiple-directed scans
    Tue Oct  7 09:08:58.809 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID_STR'
    Tue Oct  7 09:08:58.809 <airportd[63]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Oct  7 09:08:58.812 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Power Status' 'State:/Network/Interface/en1/AirPort/UserMode8021X' }
    Tue Oct  7 09:08:58.812 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Power Status'
    Tue Oct  7 09:08:58.812 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/UserMode8021X'
    Tue Oct  7 09:08:58.812 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/BSSID' }
    Tue Oct  7 09:08:58.812 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/BSSID'
    Tue Oct  7 09:08:58.813 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/SSID_STR' }
    Tue Oct  7 09:08:58.813 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID_STR'
    Tue Oct  7 09:08:58.814 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp' }
    Tue Oct  7 09:08:58.814 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/AutoJoinTimestamp'
    Tue Oct  7 09:08:58.815 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/CachedScanRecord' }
    Tue Oct  7 09:08:58.815 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CachedScanRecord'
    Tue Oct  7 09:08:58.816 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/WEPOpenSystem' }
    Tue Oct  7 09:08:58.816 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEPOpenSystem'
    Tue Oct  7 09:08:58.816 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/CHANNEL' }
    Tue Oct  7 09:08:58.816 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/CHANNEL'
    Tue Oct  7 09:08:58.817 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/WEP40' }
    Tue Oct  7 09:08:58.817 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/WEP40'
    Tue Oct  7 09:08:58.819 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/Busy' }
    Tue Oct  7 09:08:58.819 <airportd[63]> __startAutoJoinForInterface_block_invoke_2: exiting
    Tue Oct  7 09:08:58.819 <airportd[63]> interfaceBusyStateChanged: Busy state for en1 changed to not busy. gSystemSleeping = 0, gMaintenanceWake = 0
    Tue Oct  7 09:08:58.819 <airportd[63]> _updateInterfaceBusySetting: Disabling P2P scan suppress
    Tue Oct  7 09:08:58.819 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/Busy'
    Tue Oct  7 09:08:58.819 <airportd[63]> _SC_callback: Changed keys = { 'State:/Network/Interface/en1/AirPort/SSID' }
    Tue Oct  7 09:08:58.819 <airportd[63]> airportdProcessSystemConfigurationEvent: Processing 'State:/Network/Interface/en1/AirPort/SSID'
    Tue Oct  7 09:08:58.995 <airportd[63]> _handleNewMessage: Received XPC message, event = DEBUG_FLAGS_EVENT, pid = 274
    Tue Oct  7 09:08:59.037 <airportd[63]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.
    Tue Oct  7 09:08:59.147 <airportd[63]> _doAutoJoin: Already associated to “KT_MAC”. Bailing on auto-join.

    Eventually ended up on the phone with an Apple Engineer through Educational Support. They reported to us there are known issues with some RADIUS connections and didn't have any solutions beyond installing the new version of OS X 10.10 Yosemite
    We did install 10.10 on a spare machine and it did appear to solve the issue but was still in beta at the time.

  • Tried to drag a progam to the trash but each time I did a window pops up and say that i cant moved it to the trash as the application is open.. the program i wish to uninstal is a pre-paid mobile broad band a

    I tried to drag the program i wanted to uninstal to the trash but each time i try a window pops up and tells me i cant as the application is open and i know it,s not??? the program i want to uninstal is a pre paid mobile broad band,  thank you Marie 
    I have tried going to the  program it self but no where can i find how to uninstal it . I,m getting very frustrated with  this C.P  as at least  with windows you went straight to the control panel and went to ADD/Remove, and clicked onto the program you wanted gone and clicked on it and it uninstaled . GRRR

    I assume that the app didn't come with an uninstaller application/script?
    If you definitely want to trash it have a look in Activity Monitor and your Login items, as there may be something running in the background that is preventing it being trashed.
    System Preferences>Users & Groups (or Accounts depending on OS), Login items tab and delete anything that pertains to the app you want gone.
    Next, Utilities Folder>Activity Monitor, have a look to see if there is anything running with the name of the awkward app. Select it and click on the the big red 'quit process' button. Now try and trash it.
    If you are still having trouble you could try downloading the free AppCleaner:
    http://appcleaner.en.softonic.com/mac

  • Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

    Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore.  I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

    Hey dbwithers,
    Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • WRT300n wireless G will not connect.

    Any ideas. I gad a wrt54g and had no problems. I updated to the new wrt300n and my laptops will not connect.

    Follow this setting on N standard router ......
    Open routers set up page .....
    Click wireless .......
    1)  Radio Band - 40Mhz
    2)  Wide Channel - 6
    3)  Standard Channel - 9

  • E2500 - Not connecting to the video player.

    Got it home and tried to connect it to my streaming video player in the next room and it would not connect at all. I took it back and bought a different brand and it connected immediately and stayed connected for 6 hours of streaming video with zero drop outs. It stays connected and my streaming video player does not have to search for the router each time I want to use it.
    What's great about it: nothing
    What's not so great: poor connection
    This product has...
    Unreliable connection
    Dual band
    Short range
    slow connection
    About me...
    Heavy media streamer
    Technology guru
    No, I would not recommend this to a friend.
    I use it in...:Small home

    There might be some settings required in the router so that it gets the proper solution. If you are facing the concern of getting lag, dropped connections then you can try the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
    1] Open the software and go to the option which says "Router Settings"
    2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
    3] Then go to the Wireless tab, keep network mode as mixed,
    For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
    For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
    Secondly avoid using any other wireless devices like cordless phones, microwave oven etc nearer to the router. Update the drivers for the wireless card of the wireless computer. Then check the wireless connection status.

  • HOW DOES ONE HAVE B.T. BROAD BAND & TELEPHONE !!

    My argument starts with b.t. Broadband and phone, question how does one have broad band and phone if you have never ordered it in the first place, No modem means No broadband,No engineer,No Activation codes , No one has visited my home so No installation is this true !!. Yes I think so, can some one put my brain to rest.
    Right I will start from the beginning back in November 2010 I called b.t. Sales and made an enquiry about getting broadband and a telephone package installed,so then this guy in sales said i would have to set a D/D up and he would have to do a credit check on me,but i told him their was a problem ,as i did not have enough money in my bank account to set another D/D up,he then informed me he would keep the enquiry active for seven days,after this time the enquiry would be scrapped,so i never thought anymore about it,then 2 months later b.t. have started billing me, the first bill was for £130.44 the next bill was for £223.31 & to cap all that they have now instructed a debt collection company to collect £365.98 within 7 days or else,i also asked b.t. what date did & time the instalation engineer had called to my home,and the date  the package with the modem was delivered ,because you have to sign for this item i was told by the royal mail.
    Then this Saturday 25/6/2011 a woman from b.t.residential telephoned me to apologise and the matter was now closed,and they were sorry for setting this account up in the first place, next thing the same woman rang me back one hour later and said b.t. would be pursuing this matter and i should contact the debt collection ageny, i refused to pay and told her to take me to court,she also said that their were notes attached to the file and a recording made of my conversation with b.t.and me ,i asked for a copy but she asked for £10. 99 plus vat to which i refused and that stated that i had placed and order for b.t. broadband,i then said i will be seeking advice from a solicitor and would see them in court.
    Regards Jim  please comment on this matter and if anybody can advise me on this matter.

    WOW what a disater Jim,
    This is totally not your fault at all, what i would recommend is for you to contact one of the mods on this forum which you can do here http://bt.custhelp.com/app/contact_email/c/4951 
    The next thing for you to do is collate all your evidence and contact ofcom. You called BT to enqire and not take up the order so therefore ask BT to provide you with a list of account of when you called them, you have a legal right under the data protection act etc to access your data however you may have to pay a fee of £2 to £10 for your records.  Also ask for a copy of the voice recordings and or transcripts too because all calls are recorded and monitored for training purposes right!
    In any complaint, make sure you can remember the dates and times of call and also names, who did you speak to today??
    i hope this helps, the mods will help too!
    CG Over An Out

Maybe you are looking for

  • Video Sound through Express?

    I tried searching this forum, but couldn't find any answers. I am using iTunes connected via Airport Express to my home stereo. It plays music fine, but why doesn't it also stream sound for videos through Airport Express? Is there any way to do this?

  • G3 B&W New Hard Drive Installation Problems

    I got a G3 for free just recently and when I booted it up the question mark folder icon came up. So I figured the hard drive had entirely quit. I had a second drive that I had come across, loaded that into my G4 and cloned the G4's Hard Drive. I was

  • Export project in MOV H264 AC3

    Hi ... one question ... is possible export one project video in a file MOV h264 but with AC3 at 6 channel and not AAC at 6 channel? because home theater not support AAC but only AC3

  • Server with a frontend GUI

    I have an application which maintains a database of objects as an ArrayList. I'm trying to add a sort of background server, which would accept requests for information from this database and provide responses, and also be able to store new objects in

  • Apple  menu not working

    When in any program or Finder, when I click the little Apple icon () in the corner for the Apple menu, it highlights it but it doesn't pop down. Therefore I cannot select Shut Down, logout and have to do it manually. Anyone know of a solution to this